Qwest Q100 Modem Internet Not Works With Other Network
May 13, 2011i have the qwest q100 modem and my freind happened to havea qwest q1000 modem and when i just connected the q1000 the internet doesnt work. what do i do?
View 2 Replies
ADVERTISEMENT
Wireless :: Connect Router To The Qwest Modem?
Jan 10, 2012trying to set up my router from the qwest modem
View 1 Replies View RelatedD-Link DIR-615 :: Setup To Accept Qwest Modem?
May 3, 2011I have been working on this problem for the last few day and have know idea why its not working but my d link Dir-615 will not work with my qwest q100 modem.
View 1 Replies View RelatedRouters / Switches :: Bsod When Connecting To Qwest Dsl Wifi Modem
Feb 5, 2012Dell dimension 2400 XP home. Connects fine to old linksys g router.With new qwest dsl modem/router get IRQL not less than or equal as soon as I click on connect .Blue screen stop and must reboot.Qwest router works fine with my lenovo lap top. Win 7.
View 3 Replies View RelatedConnecting External Hard Drive To Qwest-Centurylink Modem?
Dec 31, 2012i have an Iomega Prestige Desktop External Hard drive usb 2.0.I also have a quest-centurylink ZyXEL modem model #PK5000Z.I would like to connect the iomega to the modem. However, I don't see a usb port on the modem.
View 1 Replies View RelatedRouters / Switches :: How To Turn Off Ports For Torrenting On Qwest Pk5000 Modem
Oct 7, 2011Ok, my roomate is hogging the bandwidth on our shared router downloading junk. I'm not sure if he's using a torrent, but just in case he is here is my question:How do I turn off the ports for torrenting on my qwest pk5000 modem? Is there anything else I can do that would work as well?My friend reccommended I turn off every port after 9000 or something.
View 3 Replies View RelatedProtocols / Routing :: Port Forwarding Minecraft - Qwest Modem / Linksys Router?
Oct 1, 2012port forwarding this im trying to setup a minecraft server with bukkit and i tried a number of things to port forward and it won't open port. I have a tomato firmware linksys router and a qwest modem.
View 1 Replies View RelatedInternet Works Through Modem Not Router?
Feb 28, 2011The inet was working through the router (we get it off our neighbours), now our neighbour is our grandad and he doesnt use the internet (his daughters do but they left home). So we decided to take the router around to our house because the signal would always be very weak in our house (but it worked.) So we connected an ethernet cable, that goes through the roof of both houses attics and into my room, and plugged the router in there. back in the other house, the wire is going into the modem.
So we have the modem in one house, with a big wire going to my house into the router. We turn it on and it works, for like 3 seconds then suddenly, we get the message "No internet access" and "limited internet access" on our XP and windows 7 laptops. On the windows 7 it shows a small yellow triangle symbol with an exclamation mark on the bars too.So I tried turning off firewall, and resetting router and all that, plugging it into modem (which I'm doing now) and have narrowed it down to something to do with the routers settings, because it works fine through the modem. and its nothing to do with the router being in the other house because we even brough the router back and its doing the same thing.I dont understand why something would go wrong just by unplugging the router because nothing was changed. Anyway I tried johnwills steps and here are my results from both my XP and windows 7,
Microsoft Windows XP [Version 5.1.2600]
(C) Copyright 1985-2001 Microsoft Corp.
C:Documents and Settingsme>IPCONFIG/ALL[code]......
Qwest Actiontec Gt701-wg - No Internet Access On Vista?
Aug 9, 2011I am running Windows Vista service pack 2 using my laptop - Hp Pavilion dv5-1111ea and I have a qwest actiontec gt701-wg router. When I try to connect to the router it says connected to local only and when I diagonise the connection it says that Security policy seetings on this computer might be blocking the connection.
The following policy might need to be adjusted to allow windows to connect: Policy Provider:Windows Firewall Filter Name: Query User
Cannot Discover Computers In Network But Internet Works
Apr 30, 2012I have a Belkin G wireless router. I have connected a Windows 7 PC using wired connection through Ethernet port.I've also connected my Windows XP PC through wireless connection. And plugged in my internet cable to the Router.Now I am able to access internet on both the PCs but I couldn't setup a network between the two computers for file sharing.
[code]...
Broadband :: Network Works Fine But Cannot Access Internet
Mar 1, 2011connect new computer running windows 7 to small peer to peer network...modem to connect to interenet is speadstream 5660...network works fine but cannot access internet...i works great in my office with a different modem...i can access the windows 7 computer remotely using go to assist also...trying to find out if there are issues with windows 7 and the speedstream 5660 modem...
View 2 Replies View RelatedLinksys Wireless Router :: Wrt54gs - Password Protected Network Works But No Internet?
Apr 9, 2013Model wrt54gsWindows xpI got the wireless network setup and password protected and my computer and phone can sign o the wireless network, but when I try to go to a website it doesn't work. If I connect te computer directly to the modem then it works.
View 2 Replies View RelatedCabling / Cards :: Modem Only Works With Router
May 8, 2011My problem is that my desk top computer only gets the internet when my modem is plugged into my router and the router plugged into the computer.If i unplug the router and just go modem to computer it tells me its not plugged in.
View 19 Replies View RelatedMotorola Modem SB5101 Only Works On Windows Xp
Feb 23, 2012I moved to a new house last week, and i have comcast internet which works on cable lines.i have them for years. anyways, i got my own motorola sb5101 modem, which i use for a while now.the problem is that in the new house the modem only works when it is connected to a computer with windows xp, it DOES NOT work on windows vista or 7,also, when i connect my router into it, it does not work either.when i connect it to windows 7 64-bit, it says "unidentified network" and "no internet access" but it works perfectly fine on windows xp 32 bit. (i have 2 xp's and 3 windows 7's)
View 5 Replies View RelatedRouter-Linksys E2000 Works / Modem-Motorola SBV5222 Does Not?
Mar 15, 2011Hardware: Modem-Motorola SBV5222 Router-Linksys E2000(Cisco brand name? I didn't buy the router) I use a PC with windows xp with sp 2 and 3 installed.Problem: I can use the internet just fine when I am connected to the router, my pc is connected directly to the router via cat 5 but when I directly connect to the modem I get limited to no connectivity. I'm not using a proxy server and before the router was set up(I live with roommates who set up the wireless network.) I could connect to the modem just fine. I can't repair the connection since it seems to be unable to renew the ip address. I've also tried to manually configure my ip address though I'm sure it wasn't the issue.I've racked my brain to think of a simple solution and it doesn't seem one is apparent and I'm almost sure it's something to do with xp and I'm not so great with software.
View 4 Replies View RelatedTP-Link ADSL2+ Wireless :: TD-W8968 Works Must Turn Off Modem
Apr 28, 2013Region : Others
Model : TD-W8968
Hardware Version : V1
Firmware Version :
I have a problem in the model TD-W8968 of modem.Wireless abruptly stopped Even works must turn off the modem Malk happens sometimes 3 to 5 times
Westell 7500 DSL Modem / Router Only Works When Connected To Desktop Via Ethernet
Jun 10, 2012So I have a Westell 7500 Modem/Router with Century Link DSL. I've been running a couple of laptops and my wifi enabled TV on the wireless. A few days ago I got a new desktop PC (Windows 7) and plugged the ethernet cable into it. Everything was great but the wireless was a bit slow for the TV so I plugged that in with an ethernet cable too. No problems for a few days. Today, we had a power blip and everything reset and I noticed that the internet light on the modem was solid red and I couldn't access the internet on any machine (ethernet or wifi). I called the ISP who said there was an outage in the area. A few hours later, solid green light on the modem BUT the TV (ethernet connected), my iphone, and my laptops could NOT connect, despite the network showing up with a full signal. Oddly, my new PC, connected via ethernet was fine so I played some Diablo (side note). Here's the deal: the new PC connects just fine but nothing else will. If I unplug the ethernet cable to the PC or disable the LAN connection, the red internet light appears on the modem. It seems as though the PC has hijacked the modem in some way. Even the TV won't connect with the ethernet cable. The only way the internet works now is if the modem is connected to the new PC. I've done all the resents - unplugged the modem and let it sit for 10-15 minutes, accessed the router settings, etc etc. Why would this start happening now after everything was working well for several days and how do I fix it? I need the wifi connection! Update: Plugged my Macbook Pro into the ethernet cable (took it out of new PC) and it works.
View 1 Replies View RelatedD-Link DIR-655 :: Router Only Works With Modem Plugged Into Output Switch Ports
Jan 16, 2012this router of my girlfriends only works when iplug the dsl modem into the output ports what could possibly cause this. would a firmware upgrade straighten it out...
View 1 Replies View RelatedWireless :: Wireless Not Works But Wired Network Works
Apr 6, 2011this computer was working on this router no problem. computer crashed and noiw computer is fine i connected it to my cable from ny desk top comutyer and works fine. It just cannot hook up to the wireless connection?
View 1 Replies View RelatedCisco :: Configure 1801 For Qwest DSL Connection
Jul 13, 2012I have a Cisco 1801 that I am trying to set up for my DSL connection. I have configured the router but when I try to access a web site I receive the Http 404 page cannot be displayed error. I have checked my DNS server on the router & I believe that I have configured it correctly? I am hoping that one of you more experienced individual can take a look & tell me where I might have gone wrong. I have included the current running-configuration for your viewing pleasure.
View 4 Replies View RelatedCisco WAN :: 2600 WIC-1ADSL Configuration To Qwest ISP?
Apr 17, 2008Here is my current config build for a Cisco 2620 using a Wic-1ADSL to connect to a Qwest ADSL ISP:
interface FastEthernet0/0
ip address 172.16.0.1 255.255.0.0
ip nat inside
no ip mroute-cache
[code]...
For some reason, it won't connect at all. I've changed the callin requirement on the ppp authentication between "callin" to "callout" - even removed the line completely for a no-authentication scenario.The only responses that come back on a repetative nature when doing a debug are:
Vi2 PPP: Authorization NOT required
and
Vi2 PPP: No remote authorization for call-out
Home Network :: Can't Get Usb Modem To Connect To The Internet With Router
Jul 16, 2012I'm having trouble connecting my 02 dongle to the internet using my router. My router is a TP-LINK MR3420 and my 02 modem device is E1752. I checked to see if the modem is compatible and it says it is. I went through the configuration that was given to me with the router and I tried using you tube but nothing. Do i need to get a static I.P address off my Internet provider? If I plug my 02 usb dongle directly into my computer it works perfectly and I got the router to work using a ethernet cable and plugging it into the WAN port at the back of the router but I would prefer to let it connect through the 3g port. I get a connection at 40% and 100 bytes are sent and some are received but the connection drops. Is it a problem with the connection? I will upload a image.
View 3 Replies View RelatedNo Network Access Message Even After Getting Connected To Internet Using Modem?
May 24, 2012I am able to connect to internet using micromax modem having aircel sim.But "no network access" message is shown and so i am not able to accesss any website.
View 1 Replies View RelatedCisco WAN :: 2620 Router / ASA 5505 And Qwest T1 With Ppp Encapsulation?
Mar 20, 2013I am trying to setup a cisco 2600 router that will be used to connect to a Qwest internet T1. I will have a Cisco ASA firewall behind the router so that I can build a site to site VPN tunnel. Qwest requires PPP encapsulation. The Lan side network is 10.2.0.0/16. Qwest gave me their serial IP address and my serial ip address which was I used to configure the route. The ethernet interface was configured for the local Lan side subnet and i natted both the inside and outside interface of the router. I am not sure if this is correct. How do I configure the router so that I can use one of the available public IP Addresses as the outside interface of the ASA?
Here is the config of the router:
version 12.2no parser cacheno service single-slot-reload-enableservice timestamps debug uptimeservice timestamps log uptimeno service password-encryption!hostname cedar!logging rate-limit console 10 except errorsenable secret 5 xxxxxxxxxxenable password xxxxxx!ip subnet-zeroip audit notify logip audit po max-events 100no ip dhcp-client network-discoverycall rsvp-syncinterface FastEthernet0/0description Lan Interfaceip address 10.2.1.1 255.255.255.0ip nat insideno ip route-cacheno ip mroute-cachespeed autofull-duplexno mop enabled!interface Serial0/0ip address 65.121.x.x 255.255.255.252ip nat outsideencapsulation pppfair-queueservice-module t1 clock source internalservice-module t1 timeslots 1-24!ip nat inside source list 1 interface Serial0/0 overloadip classlessip route 0.0.0.0 0.0.0.0 65.121.x.x (qwest serial IP address)ip http serverip http authentication local!access-list 1 permit 0.0.0.0 255.255.0.0
Routers / Switches :: How To Find The Network Security Key To Internet Modem
Jan 12, 2012How do I find my network security key for my cisco e1000 router if the computer that it is installed on is broken?
View 1 Replies View RelatedRouters / Switches :: Using A WRT54g Router With Qwest DSL And Remote Access?
Jan 3, 2012I have a Cisco 678 connected to my ISP (Qwest) using DHCP. This is connected to a Linksys WRT54g router. I also have a home server running for remote access to some files and media streaming. I just installed security cameras that I wish to monitor remotely via the internet.I can access my home files over the internet with no issue. However I am unable to access my cameras using the internet. Looking at my router incoming log, I see my request arriving, but I never get to the DVR attached to the camereas for remote viewing.I enabled bridging on the Cisco 678 but this did not solve the issue.
View 1 Replies View RelatedHome Network :: Wireless DLink Modem 2730U / Share ADSL Internet As Limited?
Aug 4, 2012I have an ADSL connection using a wireless DLink modem 2730U I want to share my internet with my neighbour as limited speed and limited traffic.How can I do this? Is it possible as wireless?
View 4 Replies View RelatedHow TCP / IP Works In A Modern Network
Mar 21, 2011Has anybody read The Illustrated Network: How TCP/IP Works in a Modern Network by Walter Goralski? url...I was thinking about picking it up. Does it offer anything new to a student studying for his CCNP?
View 9 Replies View RelatedWifi Works But No Internet On Pc
Feb 10, 2011My pc will not pick up the internet, my iPad does through my wifi. I called my provider and they said my connection is fine, they mentioned not using a USB cable but when I take it out my wifi won't work on my iPad. My pc keeps saying not connected to the internet. I have a modem and a router, do I only need 1 maybe?
View 1 Replies View RelatedInternet Works But Says Not Connected?
Jul 23, 2012My computer is connected via ethernet cable. the internet works fine. But it says that I am Not Connected and that there are no connections available.I'm not sure what specs you guys would need to look at tobut just post telling me what
View 3 Replies View RelatedHow Network Address Translation Works
Apr 18, 2011How Stuff Works "How Network Address Translation Works"."This is where NAT (RFC 1631) comes to the rescue. Network Address Translation allows a single device, such as a router, to act as an agent between the Internet (or "public network") and a local (or "private") network. This means that only a single, unique IP address is required to represent an entire group of computers." so let's say 6-7 pc's can have access to the internet using the same IP. doesn't this causes any problems? what if one of those pc's was used fore doing something illegal? how can they spot it later on? or what if 2 or more pc's access (from that subnetwork) access the same website with the same IP?
View 3 Replies View RelatedNetwork Works 2-3 Minutes And Disconnects
Mar 29, 2012I have Windows 7 PRO and since I bought it I have wierd disconnects. The network works for like 2-3 minutes and then disconnects for 5+ mintues.
View 5 Replies View RelatedLAN Network Works But Limited To No Connection On PC?
Aug 17, 2011i am pretty good with computers but this problems got me stumped, my old desktop dell deminsions 4400 will not connect to my home network. So I first reinstalled the driver and plugged the wire in and like magic i had internet. so i took it up stairs, no internet connection. so i whipped out my handy dandy laptop and plug the wire into the cat5 port and i had internet. so this is telling me the wires in my walls are working, my router and modem are working, and my pc is doing something crazy when it changes elevation. I'm about to take it downstairs to see if itll work again
View 2 Replies View Related