Setting Does Not Allow To Use All Wireless Devices?
Jan 19, 2012
Ok my Routers Sercurity Settings are on WPA/WPA2-Personal (PSK). But on this setting it does not allow me to use all my wireless devices. They appear with errors stating that i must change my sercurity settings to WEP. So i tried this, i first changed it to 128bit WEP and it connected to my other devices. But the router suddenly began automatically shutting off its wireless capabilities at frequent random intervals (the LED showing its function shutting off and all wireless internet sources). So i changed it back to my original settings and it fixed itself, but once again i could not access my devices. So i tried using the 64bit WEP option and once again it proved the same results as the 124bit WEP.
View 6 Replies
ADVERTISEMENT
Aug 15, 2011
I have installed my new E4200 and it works beautifully. I have several wirelss adapters and a few wired connections through powerline adapters. I also have a second VPN router attached to the 4200.I can see the wireless connected devices with the associated IP addresses. If I plug a laptop directly into the Cisco, I can of course see it.However, I can see none of the devices attatched to the powerline devices? I have a securty cam connected via the powerline and want to know the IP address. I checked with cisco technical support via chat and they said it is impossible. I have used 2 previous routers with the same configuration and can see all devices.
View 1 Replies
View Related
May 19, 2013
I have a home lab trying to setup a site to site vpn between 2 cisco pix 501 devices but it does not work.
[Code]....
View 4 Replies
View Related
Oct 11, 2012
All of a sudden my laptop, android phone and blu ray player (all wireless devices) can't communicate with my wired devices (marantz receiver and samsung tv). Everything still connects to the internet independently but i can't for instance play music from my wireless laptop to my wired marantz receiver. I had no trouble with this last week and didn't change anything (that I'm aware of) I did get Verizon to switch out my router but it didn't solve anything. My wife's computer also cannot connect to wired devices. Lastly, if I connect my laptop with via ethernet cable it sees wired devices fine. I tried shutting off windows firewall but didn't work. I have no other firewall/virus software installed. I can ping to all devices (wired and wireless) from my laptop.
View 1 Replies
View Related
Jun 1, 2012
Currently my home network is being switched via TrendNet TEGs80G unmanaged gig switches. I have been using them for about a year now with no issues. As my home network becomes more advanced, I recently just added a Cisco ASA5505, I am thinking about swapping those unmanaged devices, 4 of them, to managed. I was looking at the Cisco SG300-10 for upstairs, and a 16 port variant for my main core. These devices do not support full Cisco IOS cli, but they are manageable with a rich feature set nonetheless. My question is, should I swap the unmanaged devices with the more expensive Cisco devices, or just keep what works and save the money until I really need to spend it. As previously stated, my home LAN works just fine as it is, however my WiFi, NTV550s, server and workstations are all on the same network. Probably not the most secure but it is what it is without VLAN support.
View 11 Replies
View Related
Jun 7, 2012
my d-link modem is connected and was providing great wireless service to numerous devices around the house until yesterday. The wireless lights are on and stable, but we can't connect. We've tried resetting and turning off to no avail. This computer is connected via an ethernet cable through the modem
View 5 Replies
View Related
Sep 26, 2012
During the summer we had three laptops and an iPod. Two of the laptops and the iPod were having trouble connecting to the Internet, but I thought that was because we had too many devices but I looked it up and most sites said that wasn't true.
Now we have two laptops and the iPod and there are still problems so I thought it was a modem issue. It's a Webstar DPC2100R2 and when the Up and Down lights go off our wireless has trouble but if I use cord which goes through a D-Link DIR-615, the Internet is fine. When the lights go out I usually turn off both devices and turn them back on after about a minute and that usually works.But then, the lights didn't come back on so I called my Cox, my provider and they did something that fixed for about a week then the two lights went out again. Yesterday I reset them again and my Acer Aspire connected and so did my iPod but my HP Pavilion couldn't so I reset it again. Now my HP and iPod work but my Acer doesn't even though I've reset it multiple times.
What's weird is that the HP never has any trouble connecting, even when the lights aren't on or when my iPod, Acer and my sister's Dell couldn't.
View 6 Replies
View Related
Oct 3, 2010
My wired devices can see my wireless devices, and my wireless devices can see my wired devices, but my wireless devices can't see other wireless devices. And by "see", I'm talking about various media servers, like TVersity, PlayOn and Windows Media Center, and by devices, I have two wireless computers, an Xbox, and a DAP-1522 bridge, among others.Is this how the DIR-825 works, or am I missing a setting to allow the wireless devices to see and communicate with each other? Specifically, I'm trying to connect my wireless N Xbox 360 with a wireless N Win 7 Home Pro laptop.
View 2 Replies
View Related
Sep 3, 2011
I just bout a lynksys wireless adapter to connect my dvr to the internet. I would also like to connect my Blu Ray player. Can I do this with an 'ethernet splitter'?
View 1 Replies
View Related
Jun 3, 2012
Our wireless has worked fine over the past couple of years, both mine and my mom's laptops having no problem connecting. We bought Roku not long ago, which connects your tv to the internet so you can use netflix, hulu, etc., and it had no problem connecting. Now, it just stopped connecting. It detects the network but just wont connect to it. The password is right and everything. We also have this problem with an iPod touch, tablet, smartphone, and wii.
View 2 Replies
View Related
Aug 15, 2012
Can I use a USB hub to connect multiple usb devices to a single usb port on a wireless router? I want to connect a usb printer, usb scanner, and usb external hard drive.
View 1 Replies
View Related
Oct 25, 2011
I have 3 desktops, 2 laptops, 2 printers & my kindle. Sometimes the IP addresses get messed up when all of them are on at once. Then I have to reset the router. This has been happening at least once a day. Which is the fastest and most reliable rounter that can handle this load?
View 4 Replies
View Related
Jan 2, 2011
I have a laptop with a wireless broadband connection through a standard Netgear router.In addition I have a USB printer and a USB external hard drive that I use in conjunction with the laptop. What I would really like to do is:
1. Be able to print wirelessly
2. Be abe to access the external hard drive wirelessly
I only have one laptop at the moment but it would be useful to have the potential to connect other laptops if required.
I have seen devices such as the Belkin home base that appear to be able to do what I want but I'm not completely sure.
View 3 Replies
View Related
Jul 29, 2011
I'm trying to connect a few of my devices to the wireless internet at home.
1.Xbox 360
2.Galaxy Tab 10.1
3.My Touch 4g
All of them can recognize the the network they just will not connect. All my freq are good 2.4 or 2.5. WEP Key works no problem, just the minute I try to connect the galaxy tab and cell phone just says "remembered, secured with WPA/WPA2 PSK." The xbox when running the test connection fails as well.
Running vista x64 home premium on HP DV7 1270us.
View 14 Replies
View Related
Dec 26, 2011
This has been happening for about the last two weeks now. Before we never had any problems. So now all wireless devices keep on getting disconnected almost daily.
I have a laptop, 2 Iphones, an Xbox 360, and a Xoom Tablet that keep getting disconnected. The Desktop, which is directly connected to the router via a cable is fine and never gets dropped.
I tried changing channels, and wireless mode is now G only. Still keep getting dropped.
View 1 Replies
View Related
Feb 23, 2012
I have a E4200 router. The firmware version is 1.1.02. I am reluctant to upgrade; however, my iMAC is picking up the 5GHz broadcast setting, but the rest of my wireless devices only recognize my lower 2.4GHz setting. I have changed channels, my router address is changed because it conflicted with my Verizon DSL. I do not have FIOS. What can I do to fix this problem. I have an ipad, 2 iphones, 2 ipod touches, 2 laptops (PCs), an XBOX, and a PS3 that needs to connect to a higher broadcast. The connections are slow and at times get dropped.
View 4 Replies
View Related
Jan 17, 2011
I recently added several devices to my wireless-g network: Xbox 360, an HTC Smart phone, and an old laptop my buddy gave me (in addition to the 2 desktops that were already on the network). Since doing this, I've had occasional buffering problems when streaming music or video, even when I'm only using 1 of the devices. I suspect that the Xbox (or maybe phone) is downloading updates in the background, even when it's turned off, and that is consuming bandwidth. Is there any way I can see a list of devices that are connected to the network and maybe even the amount of data being transmitted to/from each so I can find the culprit. when I play online, it says that my NAT settings are not open and that this makes it take longer to connect to other players. What are the risks involved in loosening the NAT restrictions?
View 1 Replies
View Related
Sep 11, 2012
I'm having constant lag spikes. I use DPC Latency checker [URL]On both my desktop (using PCI wifi card) and my laptop I have lag spikes. This is a screenshot of the spikes [URL]. Although it says its my hardware problems, I doubt its true, as it happens on both devices.
View 1 Replies
View Related
Oct 31, 2012
I recently shut my computer down overnight, something I never do. When I booted it up the next day I had no internet connection. My computer is a desktop that's hard wired to a router and the modem. My son has a computer and an Xbox, both attached wirelessly to the router. Both of his computers are working mine is not. I keep getting a message saying "network is unidentified", but it won't let me pull up any networks. Its telling me there are no networks in my area. I have tried recycling both the router and modem numerous times, I even tried restoring my system to a date from last wk.
View 1 Replies
View Related
Jul 10, 2012
W7. Internet connection is through BT Home Hub2 and is hardwired. No problem at all. But my wireless connected BT internet radio and my wife's Kindle can no longer connect to the internet. The radio says connecting to network but does nothing. I have changed nothing I am aware of. I have looked at the BT Home Hub Wireless set up page and the settings are Using WPA and WPA2 and the correct wireless encryption key is there. Channel selection is automatic. I have changed that to 3 other suggested channels, no result. Frankly it is all Greek to me and I do not know what I am looking at. how I reconnect the Kindle by wireless and the internet radio? (I know I can use a USB to connect the Kindle, but not the radio).
View 1 Replies
View Related
Sep 2, 2012
How to specify the modern devices that are changed from wired to wireless devices at present.
View 1 Replies
View Related
Sep 30, 2012
My laptop with Windows 7 64-bit is not being able to connect to the home wireless network. But other devises like iPad and iPhone and Mac laptop can connect to the same wireless network. However I can connect to the network if I connect my laptop directly to the wireless router using a network cable.I have tried upgrading the firmware in my wireless router but no luck. THis laptop had no problem before connecting to the same wireless network. But since I came back from the back home couple of days back I am seeing this problem. But my laptop can still connect to my my-fi devise wireless network. I have tried running the netsock commands listed in a similar thread in this forum but no luck.netsh winsock reset catalog netsh int ipv4 reset reset.log netsh int ipv6 reset reset.log
View 5 Replies
View Related
Nov 4, 2011
I have a HTC wildfire S phone and a Motorola Xoom tablet which connects to my wireless network and both work fine. The only problem is that my Windows 7 p.c. can't "see" them. This means that I have to connect them via a USB lead in order to transfer files. When I try the NETWORKADD WIRELESS DEVICE option the computer does a search but doesn't find anything.
View 2 Replies
View Related
Dec 26, 2011
I have a DIR-655 with the latest firmware 1.35NA. I also with a wireless connection to a Grace internet radio and a DAP 1522 (with the latest firmware 1.31) set up as a bridge with my direct tv box connected . The DIR-655 ip is 192.168.2.1, Grace radio ip is 192.168.2.177, DAP-1522 ip is 192.168.2.3 and Direct TV box ip is 192.168.2.173. My PC is hardwired to the DIR-655. I can ping all devices from my PC, but cant ping the DAP 1522, Direct TV Box or Grace Internet Radio from my IPAD. I have no trouble connecting to the DIR-655 from my Ipad. It only seems to be anything thats connected wireless to the DIR-655 that I cant access from my IPAD. All devices have the same subnet of 255.255.255.0 and gateway of 192.168.2.1.
View 7 Replies
View Related
Mar 24, 2011
I recently went into my router and changed my security settings so that my router is WEP protected. I was having issues with somebody feeding off on my connection and causing problems with my Internet provider. I had changed it to be a secured network before but somehow it became unsecured. So, I set up an admin password and such so nobody else should be able to get into my outer . Anyway, after setting it up to with the WEP, now I cannot access the Internet from any other device except my main PC to which the router is connected.I usually get some sort of error stating that there is "limited on no connectivity" when I try to connect my laptop or Archos Home Tablet device. Yet, is reads that the signal strength is excellent and recognizes my network as existing.
View 7 Replies
View Related
Feb 5, 2012
My Dlink router has been working fine until recently. The only changes I made was to try to put time limits on my kids' devices, through Tools->Schedules and Advanced-> access control. Things worked Ok, but I soon realized I had to reserve each kids' device DHCP number, or so I thought(?) Anyhow, now I seem to have to log into my dlink router weekly as their wireless connection stops each week. Not sure if it affects the non-reserved wireless devices. Not sure what's happening or what I did wrong. Running the following: DIR615 hardware Version B2 Firmware 2.25 Under DHCP Server settings: Enable DHCP server - checked Addrss range 192.168.0.100 to 192.169.0.199 Note - reserved ips in that range Lease time 1440 minutes Always broadcast - checked rest blank NetBIOS type Mixed mode.
View 1 Replies
View Related
Feb 2, 2011
I have a Comcast modem and a DIR-655 router. I finally got them to work together (it took some doing!) and now the router has stopped working with my Roku player and laptop. It still works fine with the desktop that's wired into it.
View 6 Replies
View Related
Jan 20, 2013
I'm looking to bring up a wireless bridge between 2 WET200.I've set in Wireless -> Basic Settings and Wireless -> Security the same parameters in both devices, but it fails.
View 13 Replies
View Related
Sep 14, 2010
I am having 3 cisco wap4410n devices. i want to use them only in my home. i dont want to connect to internet. i want these devices only for intranet (only LAN) purpose. Means to transfer audio, video, songs through these devices. then how i will connect these devices in order to connect all the computers to each other ??
View 1 Replies
View Related
May 29, 2012
I have an AP541N-N-K9 Dual Band Access Point which I'm having some issues with. We have a few users with Android and iOS devices and they want to connect to our corporate network but when we configure the wireless network details in both OSs none of the devices get an IP address. We have an MS AD/DNS/DHCP infrastructure. On looking at the logs of the access point I can see the devices successfully authnticating but then I see the connection being disassociated and deauthed. A few seconds later the device attempts to get an IP address again and the same thing happens again. This loop just keeps on going forever. If we connect to the AP with an MS OS everything is fine. [code]
View 10 Replies
View Related
Jun 14, 2012
I'm seeing a problem with Apple IOS devices connecting from one SSID and then connecting immediately to another. I've tried to replicate this fault with non Apple IOS devices, but I'm unable.
Environment:
Single 5508 WLC running 7.2.110.0 AIR-LAP1142N-A-K9 AP's
WLC is in clients head office, MPLS to their branch sites. AP's are in Flex Connect mode, with AP and Flex Connect groups for the AP's at the branch. 3 x SSIDs; Corporate (802.1X), Guest (Web-Auth) & Non-Corp (PSK).
Scenario:
Client is connected to the Corporate SSID with his iPad (new model, running iOS 5.1.1). No problem with access, he is able to roam throughout the building with good SNR/RSSI. He wants to test the other SSID's, he attempts to connect directly to the Guest or Non-Corp and gets an error message on the client saying 'Unable to Connect' or 'Unable to Join'. Debugs on the WLC for the client shows no connection attempt, no errors. I can see the client disconnect from the Corporate SSID, but nothing for the Guest or Non-Corp SSID.
If the client then disconnects and forgets the Corporate SSID from the wireless profiles on their i Pad, waits 20-30 seconds (I can see the client disconnect cleanly from the WLC) and then attempts to connect to the Guest or Non-Corp SSID's - he doesn't have a problem. He immediately associates, and is able to connect. If he then tries to connect directly to another SSID, while still associated to another from the same WLC/AP – he gets the error again. Forget/wait 20-30 seconds, attempt to connect – no problem. We've tested with several i Phones (4 & 4S), i Pads (2 & new model) - all running the same Apple IOS (5.1.1).
I unfortunately can't do much troubleshooting with TAC on this as the client is no longer onsite, and I don't have a 5508 in our lab that I can currently test with. I've tried playing with beacon intervals, etc to no avail.
View 3 Replies
View Related
Aug 30, 2011
how do i connect to a friend's laptop who is using a LAN network. actually he wants to setup up a peer to peer network for me so that i can connect through to him computer. how do we setup the peer to peer wireless network so that i can connect to his LAN network through my wireless.
View 1 Replies
View Related
Jun 3, 2011
I'm having some (i lie, a LOT) of trouble trying to run LAN games between my roomates laptop and my laptop. He has a Compaq laptop, bout 4 years old or so, wireless capable and everything. I have a 2010 11" macbook air. No ethernet ports on mine, hence me wanting to set up a wireless LAN.I have tried creating a wireless network from my mac and my mates laptop can join it. but thats about it. cant set up local games or even see eachother on the server lists.
View 1 Replies
View Related
