Wireless Connection Of Peripheral Devices?
Jan 2, 2011
I have a laptop with a wireless broadband connection through a standard Netgear router.In addition I have a USB printer and a USB external hard drive that I use in conjunction with the laptop. What I would really like to do is:
1. Be able to print wirelessly
2. Be abe to access the external hard drive wirelessly
I only have one laptop at the moment but it would be useful to have the potential to connect other laptops if required.
I have seen devices such as the Belkin home base that appear to be able to do what I want but I'm not completely sure.
View 3 Replies
ADVERTISEMENT
Apr 24, 2012
I want to setup my HP printer to work as wireless peripheral. stand alone. I have my local router working correctly but cannot make HP software to also work by connecting the printer. It seems I need to find WPA security passphrase.
View 1 Replies
View Related
Sep 14, 2012
I just reinstalled my Inspiron 1720 and everything works fine but the Bluetooth Peripheral Device which keeps reinstalling after every reboot.
In device manager Bluetooth Radios, "Dell Truemobile 355 Bluetooth + EDR" and "Microsoft Bluetooth Enumerator" are installed properly but I have in "Other devices" a Bluetooth Peripheral Device which does not want to install.
I used Driver CD provided when I purchased my laptop but it does not find any drivers to solve the problem. I also went to dell.com drivers to fin the latest one and this neither does not work .
View 2 Replies
View Related
Mar 19, 2012
My Dell Inspiron N5110 Bluetooth device nis not working, what should i do ?
View 1 Replies
View Related
May 21, 2012
I have dell n5010 win 7 home basic 64 bit which shows that my bluetooth peripheral device is not installed becoz of which i think my lappy is not able to find any devices through bluetooth.
View 1 Replies
View Related
Jan 13, 2012
i have an inspiron N5030 i add bluetooth devices and can send files to all but i can't receive from any of them
and when i add devices some of them added correctly while others have problems in installing driver of bt peripheral device
View 3 Replies
View Related
Jun 30, 2012
Dell Inspiron n5110 Bluetooth peripheral device driver for download?
View 1 Replies
View Related
Jul 10, 2012
W7. Internet connection is through BT Home Hub2 and is hardwired. No problem at all. But my wireless connected BT internet radio and my wife's Kindle can no longer connect to the internet. The radio says connecting to network but does nothing. I have changed nothing I am aware of. I have looked at the BT Home Hub Wireless set up page and the settings are Using WPA and WPA2 and the correct wireless encryption key is there. Channel selection is automatic. I have changed that to 3 other suggested channels, no result. Frankly it is all Greek to me and I do not know what I am looking at. how I reconnect the Kindle by wireless and the internet radio? (I know I can use a USB to connect the Kindle, but not the radio).
View 1 Replies
View Related
Dec 21, 2012
I am having trouble with my wireless internet at home, i am using a dell inspirion with windows 7, and an ipad, my router is a Netgear DGN2000, what happens is that the connection is intermittent on all the devices when using the wireless connection but no problem when using a direct connection.
These are the spec when it is working:
Windows IP Configuration
Host Name . . . . . . . . . . . . : Ericise
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Hybrid
IP Routing Enabled. . . . . . . . : No[code].....
View 1 Replies
View Related
Nov 30, 2012
I have a Lenovo G550 laptop with Windoows 7. For the past year it has been periodically (every 5-10 minutes) losing connection with a wireless network. It doesnt matter what network I use , it does the same thing. When the connection is lost it will also cause any other wifi devices (computers, phones) to lose there connection and have to reconnect. I have tried just about anything and everything including using an external usb wifi.
View 2 Replies
View Related
Apr 18, 2010
I have a disconnecting problem with my WRT120N (Linksys) wireless router. Sometimes all wireless devices lose the connection to the internet, and the access to the router administration page (192.168.1.1) becomes impossible. In this case LEDs of power, internet and wireless are lighting without flashing. This problem usually occurs every 48 hour, and there was no way to make a reconnection except turning the router off by unplugging the power wire and plug it again…
I hope find a solution for this problem here
Other question: are there any problems in Firmware Version: v1.0.04
Note: currently I use Firmware Version: v1.0.01
View 9 Replies
View Related
Oct 16, 2011
I have a WAG160N with firmware V1.00.16 (version 1 device).The router is connected via ethernet to my main iMac running Lion 10.7.2, although the issue's I'm having have occurred for some time before upgrading to Lion or its's latest update.Firstly, devices I connect to the router wirelessly such as my iPad and iPhone will allow me to use the internet on said devices for about ten minute then the internet will simply stop. The device is shown as connected (checking the wifi settings on iPad etc show the router is still seen). If I switch WI-FI off on the device, then back on, internet is restored. It's not an internet provider issue as I can use the net all day on my ethernet-connected iMac without a problem.My printer is connected to my iMac via USB and shared with other devices. It is seen on my Macbook which connects wirelessly via the router. If I try to print from the macbook, the print job will not progress until I re-start the router. Likewise, there are applications that I sync between my ipad and iMac via iTunes with my mac connected via the USB cable. The iPad will not bee seen by the iMac unless I re-start the router. My Apple TV will only sync wirelessly with the iMac if I re-start the router.
View 1 Replies
View Related
Apr 20, 2013
Updated firmware was installed and settings were reviewed. Intermittently the E1500 looses its ability to connect only to our Android devices and "Cisco Connect" displays that it has lost Internet connectivity. The PC hard-wired to the E1500 and another PC connected wirelessly both work fine when this happens, despite the Cisco Connect message. The Android devices show the presence of the network, but they never "connect" - find the IP address. The problem can only be resolved by re-booting (powering off/on) the E1500. The loss of connectivity to our two Android devices and the Cisco Connect error display always are concurrent. E1500 looses connection to Android devices
View 9 Replies
View Related
Jan 18, 2013
I'm having a problem where my connection speeds slow down on my iOS devices. I have a EA2700 router. I have PC hard wired into the router, which maintains steady speed test numbers when other devices slow down.i have another pc that connects wirelessly (2.4 only) that maintained speed white the other devices slowEd down. Both my iphone5 and new iPad would slow down. The quick fix wasto turn the wifi on the device off, then the speed would return when reconnected. Also clicking "renew lease" in the iPhone wireless settings seemed to correct the issue.I'm not sure if there is a setting on the iOS devices or the router I can change to stop this.
View 3 Replies
View Related
Dec 3, 2011
I recently upgraded my Linksys wrt120n router firmware & had to reconfigure settings. Subsequently, some (but not all) of my apple devices are having intermittent wireless connection problems. Specifically, my ipad1 & ipad2 never lose their connection but a mac book pro (~ 2 years old), iPhone 3g, iPhone 4, older iPod touch & very old i book g4 all work for a period of time (usually 1/2 day) & then lose their connection. When I attempt to reconnect these devices I receive the following error..."unable to join the network xxxxxx....". I also have a Dell laptop (1 1/2 yrs old) that generally does not have the connection problem. Finally, when the devices do lose their network connection all I have to do to reconnect is go to the Linkys router setup webpage & click on save & the wireless connection works again (almost like this is just refreshing the connection for these specific apple devices). I was not having any problem prior to the firmware upgrade & from what I have read the older firmware version is no longer available so going back to the old firmware does not appear to be an option.
View 1 Replies
View Related
Mar 3, 2011
I work at a small business that has an exisiting wired network. Our setup is: Internet > ISP Box > DHCP Server > Switch > Users. I have been attempting to add a wireless router to the network to enable our shop techs to wirelessly access our file computer. I have managed to get the wireless working, but the network was not visible, I could not access any network computers from the wireless, and I could not access the wireless router from our main server. After this I screwed up the settings completely and even a wired connection to the router couldn't connect to the internet. Now I have purchased a WAP54G, but I forsee the same problems when I go to config everything tomorrow.
View 2 Replies
View Related
Jul 10, 2012
Reciently I bought a WRT120N Router to get a better internet connection and to have more capacity to connect different wireless devices, because the modem from my internet provider company is extremely restrictive.
I use an iMac, a Notebook with Windows 7 and a Netbook with Ubuntu 11.04, besides different devices (iPhone, iPod, PS3, Kindle). Although when I configured the router I connected every devices simultaneasly, with better signal quality than before, after using it for a couple of days I found that it disconnects itself, I can't access internet, and my only solution it's to switch it off and on.
View 1 Replies
View Related
Jan 26, 2012
E4200 not letting my known wireless devices connect when SSID Broadcast is turned off.
View 1 Replies
View Related
Aug 15, 2011
I have installed my new E4200 and it works beautifully. I have several wirelss adapters and a few wired connections through powerline adapters. I also have a second VPN router attached to the 4200.I can see the wireless connected devices with the associated IP addresses. If I plug a laptop directly into the Cisco, I can of course see it.However, I can see none of the devices attatched to the powerline devices? I have a securty cam connected via the powerline and want to know the IP address. I checked with cisco technical support via chat and they said it is impossible. I have used 2 previous routers with the same configuration and can see all devices.
View 1 Replies
View Related
Oct 11, 2012
All of a sudden my laptop, android phone and blu ray player (all wireless devices) can't communicate with my wired devices (marantz receiver and samsung tv). Everything still connects to the internet independently but i can't for instance play music from my wireless laptop to my wired marantz receiver. I had no trouble with this last week and didn't change anything (that I'm aware of) I did get Verizon to switch out my router but it didn't solve anything. My wife's computer also cannot connect to wired devices. Lastly, if I connect my laptop with via ethernet cable it sees wired devices fine. I tried shutting off windows firewall but didn't work. I have no other firewall/virus software installed. I can ping to all devices (wired and wireless) from my laptop.
View 1 Replies
View Related
May 27, 2012
Dlink Dir-657 keeps losing internet connection on wifi devices only . the connection remains to the router but no internet .if I disconnect the connection i am unable to reconnect to the router until i reboot it. My internet remains on my network cabled devices .I am running on an empty channel 3 , usually happens 20 to 60 minutes after the router is up . Dlink sent me a replacement refurbished one and this one is doing the same thing . I owned the original one for about 5 months with no problems at all ,no new electronics in the house and have not changed the placement of the router .
View 4 Replies
View Related
Jul 13, 2011
There is going to be 2 computer and a router each with there own static public ip address (ie 68.x.x.x range) The issue i am running in to is getting the netgear set up correctly, every time i disable the dhcp server on the netgear and set up all 3 devices with the static ips i lose internet connection. If i leave the set work set up as dhcp on the lan side and keep the wan static ip it all works fine.
Hardware list
2 windows 2000 pro
1 netgear model FVS318v3
View 4 Replies
View Related
Nov 4, 2011
I have a net gear WNR2000vs with the latest firmfware to date.wired devices connected: 1. my pc 2. xbox, and also one wireless device connected to my cell phone via wi fi.
View 9 Replies
View Related
Aug 18, 2012
I'm having issue with wireless connection on Belkin router F5D7633-4.Every 1-2 days my router disconnect and reconnect for no apparent reasons. When this happens, it affects it's wifi. All the devices in my house couldn't connect via wireless to this router. The only way to get these devices connected is to manually reboot the router.Do you know how to allow the router to allow many devices connected at same time?
View 2 Replies
View Related
Jul 16, 2012
I'm using LMS 4.0, after I auto discovery device, I can see all of devices on my network but I cannot view the links connect between the ASR 9000 and Catalyst 6509. I've just checked cdp neighbor on these devices, I can see the full of neighbors.
I attach 2 file, with the visio topology and the topology view on LMS , and I'm 100% sure about the connections between these devices are used. I try to re-discovery many times but it not work correctly.
View 2 Replies
View Related
Jan 3, 2012
I just upgraded to the e4200 v2 and I seem to be having connection issues with my android phone and tablet. Both are 802.11n compatable but they seem to have issues staying connected. Just so everyone is up to speed, there are two connections made by android, a general one to the internet, and a second one to the google servers (for syncing e-mail and contacts and the like) When just connected to the internet, the wireless icons are gray, when connected to the google servers as well, the icons turn blue. It's the drop in connection to the google servers that I'm having an issue with. I currently have the router set in full auto for channel and frequency band, but I've also tried setting specific ones thinking maybe the change in channel or something was causing the disconnect. The disconnect will even happen when I'm sitting right next to the router. The phone is a Samsung Galaxy Nexus (Verizon LTE) running Android 4.0.3 and a Asus Transformer tablet (Wifi only) running android 3.2.1.
View 3 Replies
View Related
Jun 11, 2011
On receiving my new dell vostro 3550, I reinstalled the windows 7 cd that came with the computer.
Before I did, I had internet connection, now I don't.
It says it finds no device. All i did was install windows. What else do I need to do for it to recognise the devices are on the system?
View 3 Replies
View Related
Jun 1, 2012
Currently my home network is being switched via TrendNet TEGs80G unmanaged gig switches. I have been using them for about a year now with no issues. As my home network becomes more advanced, I recently just added a Cisco ASA5505, I am thinking about swapping those unmanaged devices, 4 of them, to managed. I was looking at the Cisco SG300-10 for upstairs, and a 16 port variant for my main core. These devices do not support full Cisco IOS cli, but they are manageable with a rich feature set nonetheless. My question is, should I swap the unmanaged devices with the more expensive Cisco devices, or just keep what works and save the money until I really need to spend it. As previously stated, my home LAN works just fine as it is, however my WiFi, NTV550s, server and workstations are all on the same network. Probably not the most secure but it is what it is without VLAN support.
View 11 Replies
View Related
Jan 19, 2012
Ok my Routers Sercurity Settings are on WPA/WPA2-Personal (PSK). But on this setting it does not allow me to use all my wireless devices. They appear with errors stating that i must change my sercurity settings to WEP. So i tried this, i first changed it to 128bit WEP and it connected to my other devices. But the router suddenly began automatically shutting off its wireless capabilities at frequent random intervals (the LED showing its function shutting off and all wireless internet sources). So i changed it back to my original settings and it fixed itself, but once again i could not access my devices. So i tried using the 64bit WEP option and once again it proved the same results as the 124bit WEP.
View 6 Replies
View Related
Jun 7, 2012
my d-link modem is connected and was providing great wireless service to numerous devices around the house until yesterday. The wireless lights are on and stable, but we can't connect. We've tried resetting and turning off to no avail. This computer is connected via an ethernet cable through the modem
View 5 Replies
View Related
Sep 26, 2012
During the summer we had three laptops and an iPod. Two of the laptops and the iPod were having trouble connecting to the Internet, but I thought that was because we had too many devices but I looked it up and most sites said that wasn't true.
Now we have two laptops and the iPod and there are still problems so I thought it was a modem issue. It's a Webstar DPC2100R2 and when the Up and Down lights go off our wireless has trouble but if I use cord which goes through a D-Link DIR-615, the Internet is fine. When the lights go out I usually turn off both devices and turn them back on after about a minute and that usually works.But then, the lights didn't come back on so I called my Cox, my provider and they did something that fixed for about a week then the two lights went out again. Yesterday I reset them again and my Acer Aspire connected and so did my iPod but my HP Pavilion couldn't so I reset it again. Now my HP and iPod work but my Acer doesn't even though I've reset it multiple times.
What's weird is that the HP never has any trouble connecting, even when the lights aren't on or when my iPod, Acer and my sister's Dell couldn't.
View 6 Replies
View Related
Oct 3, 2010
My wired devices can see my wireless devices, and my wireless devices can see my wired devices, but my wireless devices can't see other wireless devices. And by "see", I'm talking about various media servers, like TVersity, PlayOn and Windows Media Center, and by devices, I have two wireless computers, an Xbox, and a DAP-1522 bridge, among others.Is this how the DIR-825 works, or am I missing a setting to allow the wireless devices to see and communicate with each other? Specifically, I'm trying to connect my wireless N Xbox 360 with a wireless N Win 7 Home Pro laptop.
View 2 Replies
View Related
Sep 3, 2011
I just bout a lynksys wireless adapter to connect my dvr to the internet. I would also like to connect my Blu Ray player. Can I do this with an 'ethernet splitter'?
View 1 Replies
View Related
