Types Of Devices Changed From Wired To Wireless?

Sep 2, 2012

How to specify the modern devices that are changed from wired to wireless devices at present.

View 1 Replies


ADVERTISEMENT

Wireless Devices Can't Connect To Wired Devices?

Oct 11, 2012

All of a sudden my laptop, android phone and blu ray player (all wireless devices) can't communicate with my wired devices (marantz receiver and samsung tv). Everything still connects to the internet independently but i can't for instance play music from my wireless laptop to my wired marantz receiver. I had no trouble with this last week and didn't change anything (that I'm aware of) I did get Verizon to switch out my router but it didn't solve anything. My wife's computer also cannot connect to wired devices. Lastly, if I connect my laptop with via ethernet cable it sees wired devices fine. I tried shutting off windows firewall but didn't work. I have no other firewall/virus software installed. I can ping to all devices (wired and wireless) from my laptop.

View 1 Replies View Related

D-Link DIR-655 :: Slow Wireless And Wired Speeds - N Devices?

Jan 5, 2013

Just bought a dir-655, set it up (all though the wizard wasn't working, it kept getting stuck on step 5 of 7) so I just configured everything manually.I'm getting 2.4 MB/s speeds wirelessly.I was expecting much better, my wireless g linksys router did just slightly lower than that.  My xbox 360 can't even stream HD without buffering every few mins.  It also will just stop, and be unable to see the media for a couple minutes (when doing HD).I have wireless setup as WPA2, and the devices I use wirelessly are N devices.  I have the router setup to only use wireless N.

View 14 Replies View Related

Linksys WRT160N - Sandbox Wireless Devices From Wired Ones

May 1, 2011

I was wondering if there was any way with a typical home router (for instance I have a Linksys WRT160N) to create a wireless network which is essentially sandboxed from the rest of my network. Basically I want devices on this network to be able to access the Internet only, but not any of the other computers on the network.

View 2 Replies View Related

D-Link DIR-655 :: No Connectivity Between Wired And Wireless Devices (on Main SSID)

Feb 24, 2011

Ive had this 655 for about a year now and it has been rock solid. But, there has been one slight issue.

And and all wireless devices can see each other and all wired devices can see each other....but the wired cant see the wireless and vis versa.

The wireless devices (W7 and Vista laptops) can see the wired devices when they are plugged in. But my phone and Galaxy Tab can only see whatever wireless devices there are (cant be plugged in). Even my wired Samsung TV cant see the shares on the Tab or wireless laptops (and vis versa). So, its certainly not a firewall or OS config issue.

Now, I made sure they are all connecting via the main SSID and not the "isolated" Guest SSID....but its acting like the main SSID is isolated from the wired LAN somehow.

Firmware 1.34. IPs for the wired and wireless devices are all in the 1.2 - 1.50 range.

View 14 Replies View Related

Linksys Wireless Router :: EA4500 No Devices Other Than Hard Wired Computer

Sep 4, 2012

I just now installed a new EA4500 Router. It installed itself automatically without a problem, by running the setup CD. No devices other than my hard wired computer and modem are connected yet. 
 
When I went into Start > Cisco Connect to look around and check it's version, etc., I immediately got a "There's an important update for your router" notice.  My concern is not wanting to install The Cloud at this time (although I wouldn't rule it out later). There has not been a trace of it so far.
 
I currently have  Firmware Version:  2.0.36.126507  and  Software Version:  1.4.12100.0. What this Important Update may be? Is it the "dreaded" Cloud?  I'd rather avoid the whole rolling back to pre-Cloud issue for now, if possible.

View 6 Replies View Related

Linksys Access Point :: WAP54G - Can't See Wired Network Devices With Wireless Connection

Mar 3, 2011

I work at a small business that has an exisiting wired network. Our setup is: Internet > ISP Box > DHCP Server > Switch > Users. I have been attempting to add a wireless router to the network to enable our shop techs to wirelessly access our file computer. I have managed to get the wireless working, but the network was not visible, I could not access any network computers from the wireless, and I could not access the wireless router from our main server. After this I screwed up the settings completely and even a wired connection to the router couldn't connect to the internet. Now I have purchased a WAP54G, but I forsee the same problems when I go to config everything tomorrow.

View 2 Replies View Related

Cisco Wireless :: Two Types Of Wi-Fi Authentication On 871w?

Sep 23, 2012

I have a small wireless network, which consists of three AP1121G with c1100-k9w7-mx.123-8.JEB1 ios and one 871w with c870-advipservicesk9-mz.124-24.T1.  I've configured two different ssid's with individual authorisation types - ssid_1 with eap, ssid_2 with wpa. All three ap's works as it should be, but 871w authorises only eap connections, and all other types are rejected

View 3 Replies View Related

At&t Wireless Router With Dsl Modem Security Types Do Not Match?

Jan 2, 2013

My wife's laptop will disconnect from our ATT Netscape router/dsl modem. The error we get is that the "security types do not match" ultimately we have to reboot the router and then her laptop will connect for a while. (we do not have this problem with any other devices that use this wifi connection.

View 1 Replies View Related

TP-Link 150Mbps Wireless :: WR740N - NAT Types Too Strict To Play Some Games

Mar 3, 2013

Region : Canada
Model : TL-WR740N
Hardware Version : V1
Firmware Version :
ISP :

I'm having a problem with my PlayStation and Xbox online gaming. my NAT types are too strict to play some games at all and when i set up my network connection i have a NAT type 3. I am not very handy with networking to fix my problem.

View 3 Replies View Related

How To Block Certain Wired Devices From Connecting To Router

Jan 15, 2011

I have a linksys wrt54g router. i need to block all devices except one from plugging in a wired device into the back of the router. i tried the mac filtering, but i didnt work. Is that for wireless only?I can also block local ips (192.168.1.x), and was going to go that route and only allow my local computer but i was afraid if i restarted my router or computer the ip would change and i would be locked out.

View 2 Replies View Related

Connect 3 Wired Devices To Router With 1 Port

Mar 1, 2013

I currently have an old Linksys WRT54G router with 4 ethernet and 1 internet port. I have an old Sprint 660 modem connected to the router for internet access. I am also using 3 of the 4 ethernet ports for wired devices (main PC, NAS drive and Dish Network net access). I have another PC and a printer connected wirelessly to the router.Now, with my modem going bad, CenturyLink has provided a combo modem/router (EQ660DR-F1) to be used in place of my Linksys router/modem, providing wired, wireless and modem capabilities in one.My problem is that the new router/modem has only one ethernet port along with a DSL port. Obviously, I can connect my main PC to the ethernet port, DSL to the modem port and connect my 2nd PC and printer wirelessly as they are now. How I might connect my other 2 wired devices, possibly by a hub, AP or bridge or some other means? Can one of these be connected by wireless to connect the other 2 devices, or do these have to be connected physically by wire?

View 2 Replies View Related

Multiple Wired Devices Need To Be Wirelessly Connected

Sep 21, 2011

I have a wireless G router and all of my devices that connect to it right now all have wireless adapters. I have several devices in a media closet (about 3 or 4 - Blu ray, DVR, ect) that only have wired ports. Since all these devices are right next to each other, I don't need to buy a wireless adapter for each one because that's just pointless. is there a way to have all 4 of these wired devices connect to a central device, which in turn this device connects to my wireless network? I know there is a way I just haven't been able to figure it out.And then, with this new device, is there some special way it has to be configured?

View 1 Replies View Related

Cisco Wireless :: 877w - Apple Devices Not Able To See Wired Apple TV

May 15, 2013

how to setup the wireless interface to forward multicast packets?  Basically I cant get the ipads etc.. to see the AppleTV to control it.  I connected an AP and it works fine so its got to be something with the way the router handles the packets from teh integrated wireless interface.  I've been searching the forum for about 1hr and haven't founf anything other than a breif mention of broadcast forwarding and multicast setup.

View 1 Replies View Related

D-Link DAP-1522 :: Connect A Number Of Wired Devices In A Couple Of Different Rooms

Feb 11, 2011

I am currently using a DIR-655 for the home wireless network.DSL into a 2-Wire home portal (not wireless) and ethernet into the DIR-655.I need to connect a number of wired devices in a couple of different rooms. Some streaming HDTV content to other devices in other rooms. I'm thinking of the following:

-DIR-655 routing between the DSL subnet to the internet, the 2.4GHz wireless and a couple of wired devices.

-DAP-1522 routing between the 2.4GHz wireless, 5GHz wireless, and a few wired devices.

-DAP-1522 bridging between the 5GHz wireless and a few wired devices.

All devices will/may need internet access.HDTV content would be between wired devices and only over the 5GHz wireless (no HDTV to/from internet).Is the DAP-1522 the right device(s) for this?

View 2 Replies View Related

How Many Types Of IP Address

Aug 3, 2011

how many types of ip address are involved in the process of webbrowsing? internal external.

View 2 Replies View Related

Types Of Load Balancers

Mar 31, 2011

how are load balancers classified? I did quite a bit a reading on the topic and found that the three basic types are switches,software based and hardware based. But what do global server load balancing,firewall load balancing etc refer to?Are these load balancing methods?

View 1 Replies View Related

Cascading Two Different Types Of Routers

Jul 10, 2011

I have a combined modem/router that was supplied to me by my ISP, and I want to connect a second router (Linksys) to it, because we share internet with the backhouse and the one router does not reach far enough. All of the hardware is working, but I cannot get the Linksys router to connect to the internet. Here's the stats:

The main router is a SmartRG, Powered by ClearAccess Model: SR300N I'm not sure what other information here is pertinent.

The secondary router is Linksys Wireless-G Broadband Router Model: WRT54G

The main router works without a hitch, so that's not the problem. I have the second router connected through one of the output slots from the main router, into the internet connection slot in the Linksys. Even hardwiring a computer into the Linksys doesn't work, so it seems like the actual router itself isn't connected.

View 5 Replies View Related

What Are Different Types Of Network Cables

Feb 14, 2012

What are the different types of network cables

View 3 Replies View Related

What Are Different Types Of Network Connections

Mar 12, 2011

What are the differences between DSL and cable, what makes Cable and DSL diff? How do these different networks work? Also, speed ranges would be great. There's also T1 and T3 and such? How bout those diff kinds of networks?

View 6 Replies View Related

Cisco VPN :: Multiple Types On RV180?

Aug 30, 2012

I need to connect three sites. I also need to support some roving PCs connecting to the sites via VPN. With the RV180, can I support multiple ptp vpn connects between them, and at the same time, have the roving PCs connect to the RV180s.

View 0 Replies View Related

Block File Types On Belkin Router?

Mar 28, 2013

I have a belkin wireless router and want to block the ability to download .exe and .zip files on my kids computers. Is this possible to block file downloads on only a few machines on my home network?

View 1 Replies View Related

Cisco :: ACS 5.1 Access Policies For Multiple EAP Types?

Mar 3, 2011

I am trying to configure a Unified Wireless solutions with ACS 5.1 and am having trouble with the access policies. We have corporate laptops authenticating via PEAP and 7921 phones authenticating using EAP-FAST.
 
I have one access service configured to allow PEAP and authenticate against AD and another access service configured to allow EAP-FAST and authenticate the 7921 phones against the "internal user" database.
 
I have configured 2 service selection rules. Each one points to one of the access services. The only condition I have currently configured is the "protocol" field to be RADIUS. Because both the 7921 phones and the client laptops are generating RADIUS requests I can only have one EAP type working depending which rule is at the top. Because the RADIUS protocol field is always matched, requests never get past the first rule.
 
how I modify the rule to be able to distinguis between VoIP handsets on one WLAN and client laaptops on another so that correct access policy is used for each device?

View 5 Replies View Related

Cisco :: WS-C4507R+E Any Package To Install To Discover These Types Of Device

Jan 4, 2012

I tried to discovery WS-C4507R+E devices with lms 4.0 but the devices result unknown, any package to install to discover these types of device?

View 1 Replies View Related

Linksys Wireless Router :: E4200 Can See None Of Devices Attached To Power-line Devices

Aug 15, 2011

I have installed my new E4200 and it works beautifully.  I have several wirelss adapters and a few wired connections through powerline adapters. I also have a second VPN router attached to the 4200.I can see the wireless connected devices with the associated IP addresses.  If I plug a laptop directly into the Cisco, I can of course see it.However,  I can see none of the devices attatched to the powerline devices?  I have a securty cam connected via the powerline and want to know the IP address.  I checked with cisco technical support via chat and they said it is impossible.  I have used 2 previous routers with the same configuration and can see all devices.

View 1 Replies View Related

Cisco :: WS-C3750-48PS-S / CiscoWorks Not Discovering Correct Device Types

Jul 27, 2011

Whenever I add devices in CiscoWorks and do not manually specify the device type. CiscoWorks find itself wrong device types for it, For example I have found that mostly it classify WS-C3750-48PS-S as below device types; [code]

Also found that  WS-C3560-24PS-S discovered as 7600 series routers.

View 3 Replies View Related

Belkin Wireless Changed Ip Address On Its Own?

Dec 7, 2011

my belkin wireless changed ip address on its own and now i cant get to my router homepage are connect xbox wirelessly. my computer seems to connect without a problem, what do i need to to?

View 1 Replies View Related

Cisco Wireless :: AIR-AP1252AG Autonomous AP Can Be Changed To LWAPP AP

Aug 25, 2011

I would like to know  AIR-AP1252AG-A-K9 (Autonomous AP) can be changed to LWAPP AP by changing IOS image??

View 1 Replies View Related

Linksys Wireless Adapters :: WUSB11 Changed To WPA2 And Notice Wireless B Device Won't Connect

Nov 7, 2012

I have a WUSB11 Wireless B and wonder if it accepts WPA2 security, I originally had my router set to WPA, and the wireless B worked fine, I have since changed to WPA2 and notice the Wireless B device won't connect.

View 8 Replies View Related

Changed Password To Wireless Connection - Can't Do It In Laptops Network Settings

Jan 29, 2013

I changed my password to my wireless connection and now I can't change it in my laptops network settings

View 7 Replies View Related

Linksys Wireless Router :: E2500 Is There A Setting Or Setup That Needs To Be Changed

Feb 17, 2012

I had to change from a WRT300N wireless router which died to a new E2500.  I noticed that the speed my computers report that they are connected to the wireless network connection is now 144.5 mps, versus 270 mps with the WRT300N.  There is no change in location of the devices or computers.  The computers use a WUSB300N adapter.Is there a setting or setup that needs to be changed?

View 2 Replies View Related

Linksys Wireless Router :: WRT120N Changed ISP In Hopes Of Getting Better Services

Apr 9, 2012

recently I changed my ISP in hopes of getting better services for a cheaper price. The package I got claims that it has 24mbps download speed. I went on speedtest.net and compared the download speeds between my old ISP and the new one and it turns out it was the same; 7mbps. Either the technicians who came over to setup the new internet messed up or the WRT120N is having problems.

View 7 Replies View Related

Linksys Wireless Router :: E2000 -Admin User ID Changed To SSID Name?

Jul 12, 2010

I have manually configured the E2000 and set the admin password. When I was trying to log back in, I could not. I reset and reconfigured and set the password again. I still could not log in using "admin" and the password I set up. I thought I was losing my mind. Just on a hunch, I used the SSID name instead of "admin", then entered the password that worked. I am able to login, but I need the username to be admin, not the SSID. Has anyine else had this issue? Any way to change the administrator name back to admin??

View 5 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved