my belkin wireless changed ip address on its own and now i cant get to my router homepage are connect xbox wirelessly. my computer seems to connect without a problem, what do i need to to?
View 1 RepliesI have talktalk router,I need to change it with Belkin router,how I cant set up a connection? My self I have try but the connection is but router is not connect.
View 2 Replies View RelatedBuffalo Linkstation HD-H250LAN and Netgear N300 DGN2200v3 ADSL2 Modem Router.
3 PCs connect without a problem, 2 wireless and 1 wired, but cannot get it to recognise the Buffalo Linkstation. Netgear uses 192.168.0.1. but Belkin used 192.168.2.etc.
Linkstation setup says Linkstation not connected, but it is.
when I did ipconfig it gave me 174.61.85.170. What to do
View 3 Replies View RelatedI was talking to a friend today and he told me that a router changes the IP address you're given to by the ISP? So I checked with whatismyip.org and let's say with the router, it showed, 29.28.29.450, Then I took the router out and just used the modem and it showed as 29.28.29.449 If I were to use a different router, would it end with 450 again? Or an entirely different number, because the router is of a different brand? I'm assuming having a router is good for protection from malware, trojans and what not?
View 1 Replies View RelatedI believe we accidentally changed the NAT on our wireless g MIMO F5D9230-4 router. Now only one laptop is actually connecting to the Internet, but it looks like our network isn't secure anymore. Our 2nd laptop is connected wirelessly to the router, but not the Internet. Our iPhones and iPad are not connecting at all.
View 1 Replies View RelatedI have a D-Link DIR-632 router flashed to DD-WRT.My original setup to my cable modem worked fine, i set up my wireless parameters via the DD-WRT software and everything was peachy until last week when my access (on the ISP end) was interrupted. Time Warner sent out a serviceman while I was at work and apparently he "Changed the IP Address".Now when I try to connect via my router, I get constant DNS errors (Windows 7 64 Pro).
View 5 Replies View RelatedI have a Windows 7 computer. My boss changed the IPv4 address of this computer. Nowalthough all computers can connect to the network, they can no longer see this computer. And this computer cannot connect to the other computers.
View 1 Replies View RelatedI've configured a easy VPN between cisco 3845 and cisco 871 router, 3845 is VPN Server.I am facing problem at client router ie.whenever The public IP address is changed the VPN is disconnecting.
View 3 Replies View RelatedEverything was working fine and I was poking around in the router settings and clicked the Clone Mac Address button to see what it did and hit Apply.
Now the internet isn't working (on the neighbor's internet) and I can't even get back on the router (192.168.1.1) I reset the router but it still isn't working.
I have an ASUS Wireless Router RT-N66R.
Edit: I got back on the router but now my wireless MAC address is the same as the LAN MAC address. I think this is what the cloning did. Is there any way to find my old MAC address?
The section is titled Special Requirement from ISP so I think I may need to use a certain MAC address but I don't remember what the old one was.
i'm running a 5510 asa and the vpn has been working great for a while. We recently change our network provider so i had to change the public ip, and dns on the firewall... now i can still connect via the vpn and browse accross my mpls to other sites, but cant really access anything on the native lan that the firewall resides on?
View 9 Replies View RelatedThe company I work for has a small network and it has a windows 2000 server. When the Canon iRC 2880 printer is connected the server gives a error saying that a duplicate name exits in the network. I tried changing the IP address as well. When I changed the IP address of the printer the duplicate IP address moved the new IP address.
View 10 Replies View RelatedI have a Belkin wireless router attached to my computer. It was set up as an access point, with an IP address of 192.168.0.254. I had some problems with the network today and could not access this unit by typing in the IP in my browser. I feel certain that is the IP address I put in it when setting it up, as I have a record I kept of all the settings. Is there a way to retrieve the IP address to verify that is what it is set to?
View 3 Replies View RelatedHave Belkin F507632-4 router on Desktop that has worked for 5 years with 3 other laptops in the house. Suddenly wireless connection disappears on dektop only. Belkin managing the connection (not Windows). Message is : cannot acquire IP address .What is the best place to start? Have tried disable and enable with no sucess.
View 1 Replies View Relatedi want to use the belkin to connect a sky box to a sky wireless router, it doesnt work as the ip adress for sky is different, is it possible to change the ip address in the router
View 1 Replies View RelatedI just got a new Thompson Cable Modem from MediaCom. The old Surfboard gave out. However, my Belkin F5D9230-4 will not retrieve a new IP address. When I hook my laptop to the cable modem, I do get an IP and I can surf the web. The Belkin admin page says Disconnected. I've got latest firmware. I've reset to factory standards. What else can I do to get my Belkin working again?
View 1 Replies View RelatedI've just changed my router to a Belkin N+ Wireless Router (F5D8235uk4) My home network is on the 10.0.0.0 ip address range.
I changed the routers IP address to 10.0.0.2 (same as my last one) and the subnet is set to 255.0.0.0
My problem is that whilst my PC's are in the 10.0.0.10 to 10.0.0.20 range my NAS ip is 10.10.10.10 and when I go into the port forwarding (virtual servers) settings on the router it only let's me set the last octet with the first three octets set to 10.0.0. and these can't be changed so I can't port forward to my nas.
Surely the virtual servers should be able to forward to any PC in the subnet, not just those in a 255.255.255.0 subnet? I don't want to change my nas IP address even though that would fix this issue.
What do I do if I cannot access the setup address IE 198.168.2.1?I use my N750DB as a network booster at home. It runs via ethernet cable from the main router. I used to be able to get on no problem and now, I just can't. I have spent 2 days trying to sort my internet problems.
View 4 Replies View RelatedI have a n150 and it only allows private ip addresses for the lan setup. Is there anyway to assign a public address? I need to have the DHCP use a public range and I can't do that unless I can set the router to a public ip.
View 2 Replies View Relatedhow do I MANUALLY assign ip address to devices connected to my n300
View 1 Replies View RelatedI want to limit data consumed by one of my devices; how can I do that. I have set up wireless network using Belkin AC 1200 DB.
View 1 Replies View RelatedI have a Belkin N150 wireless router. I have enabled MAC Address Filtering as an added level of security. However; whenever I access the router, and if I check that page; the check mark for the option to enable the filter is always blank.
I have checked the option, clicked Apply Changes, and logged out of the router. i went back in this morning, to check the security logs. (Looking like someone is trying to jump on my network) I didn't see anything there, but when I checked MAC Address Filtering; there was no check mark indicating that the filter was turned on.
It took a while of troubleshooting since I've never ran into this problem with my wireless router before. But finally I figured out that my router will not assign the proper DNS server addresses when assigning through DHCP. I upgraded from 2.10.02 and still the same issue.
View 1 Replies View RelatedI am working with MS Windows 2008 R2 and a Belkin F5D8635-4v1 router.
I have already set up a dynamic IP address which points to my router at home. In my home network I have multiple PC's that I would like to access from the internet. I would like to achieve this without needing to change my port forwarding rules on my router each time...
My thoughts are that I use a single dynamic IP address pointed to my router. My router then forwards to a server with some sort of software that can then forward to the correct PC based on the host name.
So I have 3 domains set up all pointing to the router's IP address:
dest1.domain.com -> 41.xxx.xxx.45
dest2.domain.com -> 41.xxx.xxx.45
dest3.domain.com -> 41.xxx.xxx.45
The router is not smart enough to redirect by host name, so it will just forward everything to 10.0.0.20 The server based at 10.0.0.20 must then have software to now redetermine the target based on the host name. The rules would be set up as follows:
dest1.domain.com -> 10.0.0.22
dest2.domain.com -> 10.0.0.24
dest3.domain.com -> 10.0.0.26
How to specify the modern devices that are changed from wired to wireless devices at present.
View 1 Replies View RelatedI would like to know AIR-AP1252AG-A-K9 (Autonomous AP) can be changed to LWAPP AP by changing IOS image??
View 1 Replies View RelatedI have a WUSB11 Wireless B and wonder if it accepts WPA2 security, I originally had my router set to WPA, and the wireless B worked fine, I have since changed to WPA2 and notice the Wireless B device won't connect.
View 8 Replies View RelatedI changed my password to my wireless connection and now I can't change it in my laptops network settings
View 7 Replies View RelatedI had to change from a WRT300N wireless router which died to a new E2500. I noticed that the speed my computers report that they are connected to the wireless network connection is now 144.5 mps, versus 270 mps with the WRT300N. There is no change in location of the devices or computers. The computers use a WUSB300N adapter.Is there a setting or setup that needs to be changed?
View 2 Replies View Relatedrecently I changed my ISP in hopes of getting better services for a cheaper price. The package I got claims that it has 24mbps download speed. I went on speedtest.net and compared the download speeds between my old ISP and the new one and it turns out it was the same; 7mbps. Either the technicians who came over to setup the new internet messed up or the WRT120N is having problems.
View 7 Replies View RelatedI have manually configured the E2000 and set the admin password. When I was trying to log back in, I could not. I reset and reconfigured and set the password again. I still could not log in using "admin" and the password I set up. I thought I was losing my mind. Just on a hunch, I used the SSID name instead of "admin", then entered the password that worked. I am able to login, but I need the username to be admin, not the SSID. Has anyine else had this issue? Any way to change the administrator name back to admin??
View 5 Replies View RelatedI recently upgraded the firmware on my wrt 160N v3 and changed the wireless security to WPA2 Personal from WEP (I needed to do this to get higher speeds from a recently purchased wireless adapter). Now the router stops transmitting a signal intermittently for about a minute before coming back on line. The time between droppages is also not the same. Before the firmware upgrade (and the change in security settings) the router was rock solid. Where I can get the older version of the firmware (which seems to be more stable than the current version)?
View 4 Replies View RelatedI have a wrt160n router set up at a friends house that i would connect my windows xp laptor to when i would go there. it always worked fine. i recently got a new laptop with vista 64 bit OS. i went to my friends today and connected via wireless for the first time. i expected to get prompted for the security key. instead it asked for the pin #. the pin number was something new i noticed when i replaced an older linksys with the new wrt160n so i had it in my notes. i entered the pin number and connected to the wireless router. but then my friend laptop could not connect and said it couldnt find the network. when i viewed the available networks, i noticed that the original network SSID had been changed to my vista laptop's computer name. i had to physically connect my laptop to the router and reconfigure the settings of the wireless network. then my friend was able to see the available network and automatically connect..
View 6 Replies View Related