the network id button is disabled on my windows 7 home premium laptop.client for microsoft network is installed network card is okay, infact i can see the network locally but i can join the domain.
View 2 RepliesThe enable button is grayed out on my windows XP laptop so I need to know how to enable it.
View 2 Replies View RelatedI have a pair of ASA 5520s operating in failover pair as active/standby, having two contexts on them. I am planning to share the load and make it active/active making first context active on the primary unit and second context active on the secondary unit. My question is if this will disrupt any connectivity thru these firewalls when I do "no failover" on the active/standby and assign the contexts to different failover groups and enable the failover back.
View 6 Replies View RelatedI installed windows xp on a pc that had no OS it previously had windows xp sp3 but I deleted the partion by mistake, so I went down to windows home sp3. after the setup I have no Internet access atall, whenever I try making a dial up etc it just doesn't work, I am using a fairly old computer optilex 6x620 just for browsing, but I have to swtich to Ubunutu to get internet access which is so slow.
View 10 Replies View RelatedWe are still running ACS 4.1 on Window 2003 server. We recently upgraded AD to 2008 although the domain and forest functional level are still 2003. After AD upgrade we now unable to authenticate via ACS Windows Database.
View 13 Replies View RelatedWe are planning to upgrade CORP Domain from Windows 2003 Active Directory Schema to Windows 2008 R2 Active Directory Schema.
I wanted to know if the following applications which are installed on windows (domain member servers) are compatible with windows 2008 server R2 schema?
CiscoWorks LAN Management Solution 2.6 Cisco Secure Access Control System 4.2Cisco Fabric Manager 1.5
i have installed system (Windows Server 2003) and i have configure Active directory for testing and configure one user under it ( TEST01)now on the same machine i have installed Cisco ACS 4.2.i'm trying to Authenticate (TEST01) using ACS but it's not working, i can't even see the logs under EVENTVIWER. simple and easy to configure since both AD and ACS is on the same machine.
View 4 Replies View RelatedI have a dell Inspiron laptop N4010 and my hard drive was crashed and I bough the new hard drive (Seagate 250 SATA/GB/GO) before I have a TOSHIBA Hard drive with 500gb.I have installed the Window 7 Home Premium but I was trying to install Network drivers(for wireless and LAN) but those drivers are not installed due to hardware not compatible . I don't understand what I am missing in this process.network controller - VEN 8086 DEV 0087.
View 1 Replies View RelatedMy phone is a Nokia-N900, and I find the most useful way to interact with it from my PC is by ssh. Luckily it is possible to switch out the usb-networking module in the devices kernel to make it appear to windows as a generic RNDIS gadget. Plugging it into a windows PC I can now ssh into it, I can open an sftp session, everything works perfectly...
Except I can't access the web. I can't view other network resources. I look in the network connections section in the control panel and see my two connections, but I don't see any way to set which one to use for what. Seeing as I only use usb0 for ssh and eth0 for everything else, it seems I need a way to set it up so that usb0 only gets port 22 or something similar.
Is there any way to achieve this, or another method by which I could leave my phone connected to my Pc while using it for other network tasks?
Can we integrate cisco acs verison 5.x with active directory Microsoft windows server 2012 ?
View 1 Replies View RelatedI am looking at deploying a pair of 5585X's in an active/active multiple context state. I am creating Mulitple contexts that need to be able to route to each other. I was going to deploy a type of Gateway context that has a shared interface to all of the other contexts, instead of sharing interfaces directly between the contexts, i beleive this will work as basically i am just cascadng the contexts and sharing interfaces.
The main problem i have come across, is that if i deploy active/active across two appliances using 2 failover groups i can not see a way to route between them, for example.
I have Context 1, Context 2 and Context GW A including the shared interfaces of Con1 and Con2 in failover group 1 on appliance A with the respective standbys on Appliance 2. I have Context 2, Context 4 and Context GW B including the shared interfaces of Con 3 and Con 4 in failover group 2 on appliance B with the respective standbys on Appliance 1.
I need to be able to route traffic between Context GW A and GW B so that the contexts can communicate in normal operation and in failover. I do not beleive that I can share an interface between contexts in two separate failover groups and to be honest without adding a L3 device between the appliances i am not sure if this is possible.
I have two ASA 5510s running in Active/Active mode. I need to make config changes on them. How do I go about it? Do I power off the secondary ASA and make the config changes on the primary and then power on the secondary ASA ? Or this another way to do this?
View 3 Replies View RelatedI have an ASA5520 in location A with an ISP connection and a matching ASA5520 in location B with a separate ISP connection. We have fiber connecting the two locations and vlans passing back and forth so I will be able to configure the failover via a vlan as well as extend the ISP's to each location via vlans. The Active/Active configuration with the multiple security contexts does not seem to be an issue but how is a redundant ISP configured in this mode?We want to have context A using the ASA in location A with ISP1 as the primary and failing over to ISP 2 in locaiton B We also want to have context B using the ASA in location B with ISP 2 as the primary and failing over to ISP1 in location A Would route tracking provide the desired result? Is there a better option?
View 1 Replies View RelatedThe 6509 Series Switches support the scenario VSS Active-Active Chassis, I would like to setup both switch's as one virtual switch but working at the same time, not with Active - Stand By Chassis.
My plans it to create PortChannel accross both Switches 6509 in order to have 2 links one connected to one slot/switch and the other connected to slot/switch in the second 6509 for servers redundancy.
I am working on a network which has two ISP connections (Active/Active) terminating on router (ASR1000). From the LAN side (6500 switch) all the traffic need to be route on ISP1 but some of the specific subnets like 10.250.0.0/16 need to be route on ISP2 connection.
I am planning to use PBR and NAT with route maps. any documents or refrences are provided.
(access switches)---------(core switch)----------(routers)----------------(ISP1)
----------------------(ISP2)
I faced one problem in our core switch 4507 R . Active sup lost connection and standby came active. We got lot of errors/alerts on console shown below. [Code] Also when I reloaded the switch with reload command only both sups got reloaded but I want to reload all the modules but reload command do not gives any options for that.
View 2 Replies View RelatedI have 2 asa 5520 firewalls including and 1 AIP-SSM-10 module in each of them. the configuration is set using active/active failover and context mode.
Both of them run individualy the IPS module. The IPS is configured using inline mode and fail-open option. However when one of the module fails and the state is changing from up to init or anything else making the IPS to fail then failover is detected and ASA consider it as failover and bounce context to the other unit.
IPS soft is 6.0(4) and ASA soft is 8.0(3)
I have checked cisco doc and it is confusing to me. it says: "The AIP-SSM does not participate in stateful failover if stateful failover is configured on the ASA failover pair." but it really does participate. Running is not really an option because of production network impact matter..
We have an Active/Active ASA 5520 setup, as i know in Active/Active setup there is no remote VPN access, So i could overcome this limitations?I have a solution but i dont know if it is ablecable or not? we have a spare ASA 5510, so i can use it behind Active/Active Firewalls and assign a public static NAT IP address to it and open all IPSEC and VPN ports and let the remote users to connect to it, is this ablecable setup or not?
View 1 Replies View Relatedits possible to set up active/active failover using etherchannel on 5585s?
View 1 Replies View RelatedHow to Configure ASA5520 for Active/Active
View 8 Replies View Relatedour application team is mandating, that the solution we should come up with for SLB, should support Active/Active mode of SLB operation.
My question, is this mode of operation supported/accredited by Cisco, and what is the draw back from the traditional active/standby.
I am trying to connect my LED Samsung Series 6300 TV to the internet. I have Samsung wireless LAN adaptor WIS09ABGN inserted into TV and I am using LINKSYS wireless home router WRT12ON-CA.
View 1 Replies View Relatedknow where is the reset button on my new SMCWBR14-G2 BARRICADE WIRELESS ROUTER ; I am using AIRTEL'SBROADBAND CONNECTION with IP ADDRESS as 192.168.1.3
View 1 Replies View Relatedmy wireless on my computer says that it is not enabled... how do i enable it? i do not have a wireless button, and my computer defonately is wireless?
View 1 Replies View RelatedI am trying to hook my tv up to my wireless network but I cannot find the WPS key on my router? Is this necessary?
View 1 Replies View Relatedwhere is the wps button on router
View 2 Replies View Relatedi have a laptop that has a wireless button on the front and every time i try to click it to turn it on, it wont even blink. On the wireless networks, all it says is hat no connections are available. get my wireless network button on my laptop to turn on somehow?
View 7 Replies View RelatedI am running Win7 ultimate edition 7100 (i think), fully updated. Im on a network with 2 other computers through a router via lan cable.
I've recently written a batch file to share my files on my portable hard drives with my network, using the 'net share' command. It runs with my computer startup.
Everything is working fine, and the files/folders are shared perfectly.
Now I cannot share any new files with anyone... I right-click a folder, got to properties, click on the sharing tab. Now usually there is 2 buttons, one that says "Share" and one that says "advanced Sharing". The "Share" button under 'Network File and Folder Sharing' is greyed out.
Also when i right-click a folder, and go to "share with", there is nobody to select.
Ive tried googling it, and messing around myself. My old shared folders are still being shared, I just cannot share any new ones.
i have an hp laptop that has a wireless button on the top right hand of the typing area. It has turned red before and all i had to do was push the button and it would turn gree. It has gone red again and when i push the button it stays red.
View 1 Replies View RelatedMy keyboard was broken so plugged in a USB keyboard that doesn't have a fn button. I must have accidentally pressed something as my comp is asking me to turn in the wireless capability. There is no button on the computer and the light for wifi is off. How to turn this back on with a keyboard that does not have a fn button?
View 1 Replies View RelatedI've been tasked with setting up a laptop that I would describe as "ancient". It's running XP SP3 right now and it does that rather well. However, there's one issue that I have not yet been able to get rid of and I've been working on this on and off for about a year (luckily, the laptop's owned by a relative, so I'm not on a deadline). However, all lack of deadlines aside, I'm at my wit's end. So here's the issue.Whenever I boot the laptop up, the Wireless Button is disabled. Since this laptop is never going to be moved again, it's very bothersome to always have to push the button, wait for a while and then have it sign in. Here's what I want: I want the laptop to boot up, then automatically link up to the house's own WLAN.
The Wireless connection is handled via Wistron Launch Manager 1.1.0 and the laptop is a Littlebit Coris Z71. I've figured out that an EXE named WButton.exe is responsible for the availability of wireless connections. However, putting a shortcut to this EXE in the Startup-folder of the startmenu hasn't worked either. I also seem to be unable to figure out what process WButton.exe uses or which values it changes, let alone where they're changed. For all I know, the wireless connection is handled by a magical randomness.
i have an hp laptop that has a wireless button on the top right hand of the typing area. It has turned red before and all i had to do was push the button and it would turn gree. It has gone red again and when i push the button it stays red.
View 1 Replies View RelatedI can't switch on my wi-fi with the functional + button. Is it only hardware problem/ Windows7...or driver?
View 1 Replies View Related