Unable To Set Password And / Or Username For Guest Access?
Nov 14, 2012I am unable to set a password and/or username for guest access.
View 1 Replies
ADVERTISEMENT
Cisco :: 5508 WLC / Guest Wireless - Redirect Page - Username / Password
Feb 19, 2012I have a 5508 WLC running 6.0.202.0. It functions as the Anchor Controller for the guest network. It sits in our Internet DMZ and is isolated from the rest of the network. It does not connect to AD, ACS, etc. The guest wireless WLAN is configured for Web Policy - Authentication. I have a customized login page. Credential management is done by WCS.
Users are connecting to the guest wireless network and entering their creds with no issues using mobile devices (iPad, etc). Then the mobile device goes to sleep / turns off and when they go to use it again, they have to type their creds in again. They dont like retyping their creds throughout the day.
good way mitigate the multiple logins? Something like a 'save password' option on the customized page?
Cisco WAN :: Unable To Change Username And Password On 2800?
Nov 29, 2011I have tried to change the username and password using the following procedure but when I do so and reboot the router and try to login using the new userid and password it says Authentication failed. Complete these steps in order to recover your password:Shut down the router.Remove the compact flash that is at the back of the router.Power on the router.Once the Rommon1> prompt appears, enter this command:confreg 0x2142Insert the compact flash.Type reset.when you are prompted to enter the initial configuration, type No, and press Enter.At the Router> prompt, type enable.At the Router# prompt, enter the configure memory command, and press Enter in order to copy the startup configuration to the running configuration.Use the config t command in order to enter global configuration mode.Use this command in order to create a new user name and password:router(config)#username cisco privilege 15 password ciscoUse this command in order to change the boot statement:config-register x2102Use this command in order to save the configuration:write memoryReload the router, and then use the new user name and password to log in to the router.
View 16 Replies View RelatedCan't Access Username And Password
Jun 20, 2011How can i edit on who will have the most percentage of internet?i cant access the username and password.
View 1 Replies View RelatedProtocols / Routing :: DI-524 Can't Access Username / Password Field
Jun 26, 2012I did not know the username and password for my DI-524 so I wanted to do a reset...used a paper clip and held the reset button for ten seconds, unplugged it, powered it up, and as per online instructions tried to type in 192.168.0.1 to access the username and password field so that I could enter "admin" and blank password. Here's where my lack of knowledge comes in. I am working off a MacBook with no Ethernet connection, just wifi. Is what I am trying to do even possible? Or does the computer I configure the router with have to be hardwired to the Internet while I do it?
View 1 Replies View RelatedLinksys Cable / DSL :: Cannot Access Username And Password On WAG160N
Aug 3, 2009I cannot access the Username and password on my WAG160N - the ones I thought were correct do not accepted, nor are the quoted 'defaults'.I have tried holding down 'reset' for 30 secs; I have tried powercycling the router after and during this; I have tried 'resetting' with the phone and ethernet connections unplugged. This is NOT returning the machine to the default settings - and neither is it 'wiping' the existing settings for my ISP.The amusing thing is - it works perfectly well, but I can't alter my security settings and I can't alter other settings if I change my ISP (as I was intending to do).
View 9 Replies View RelatedWireless :: Username / Password Required For External Hard Drive Access
Aug 26, 2012I am looking to get access to an external hard drive that I have set up on my wireless network.When I try to do an automated Windows backup (off my Vista based laptop files) on to an external hard drive which is connected to my wireless network (through a Belkin router) I am being asked for a user name and password to access the connected hard drive on the network. The thing is that I don't remember setting up a username and password for the hard drive at all. I can paste single files mannually onto the external hard drive without being asked for a username and password. I did perform an automated Windows backup off my other Windows 7 laptop and was not ask for a username and password. where to find the username and password information ?
View 3 Replies View RelatedCisco Wireless :: Aironet 1231G - Cannot Access Default Username And Password
Jan 3, 2013I am resetting my Aironet 1231-G access points and cannot access the default username and password. Here is the information I am getting on the Console. I reset getting the amber light. Attempt to use Cisco as the Username and Password. It replies that authentication fails with the below log information.
*Mar 1 00:00:04.591: %SOAP_FIPS-2-SELF_TEST_IOS_SUCCESS: IOS crypto FIPS self test passed*Mar 1 00:00:05.868: %SOAP_FIPS-2-SELF_TEST_RAD_SUCCESS: RADIO crypto FIPS self test passed on interface Dot11Radio 0*Mar 1 00:00:05.969: %LWAPP-3-CLIENTEVENTLOG: Read and initialized AP event log (contains, 1025 messages)
*Mar 1 00:00:06.104: status of voice_diag_test from WLC is false*Mar 1 00:00:07.156: STUB Called : crypto_ssl_init*Mar 1 00:00:08.198: %LINK-3-UPDOWN: Interface FastEthernet0, changed state to up*Mar 1 00:00:08.244: %SYS-5-RESTART: System restarted --Cisco IOS Software, C1200 Software (C1200-K9W8-M), Version 12.4(23c)JA2, RELEASE SOFTWARE (fc3)Technical [URL] Copyright (c) 1986-2011 by Cisco Systems, Inc.Compiled Wed 13-Apr-11 12:55 by
[code]....
Cisco Wireless :: Wap4410n - Access Point Rejects The Username And Password
Jun 25, 2010Recently I have purchased two brand new wap4410n access points.
I have connected my computer directly to one of the access points, and attempted to connect to the Web Configuration utility through my web browser.
I'm using a: 09' MacBook Pro, running Snow Leopard and Safari 5.
I can access the login screen of the access point, although when I enter the default username: admin and password admin, the login screen returns an error: Invalid username and/or password (or something to that effect). The URL changes to: http://192.168.1.245/login.htm&no=3.
I have reset the device by holding in the reset button for thirty seconds, powered down, powered up and re-attempted to login.
I still get the same error as above.
I have attempted to access the Web Configuration utility on both access points, and both access points provide the same error. I have also tried using the username: cisco and password: cisco.
Cisco, when contacted, said both access points must be faulty and I should replace them.
The probability of such an occurrence happening with two devices seems very low, and leads me to think there must be other factors at play. The only constant I can think of is the fact I'm using the same computer to access the devices.
Cisco Switching/Routing :: 3825 - Access Denied While Entering Username And Password
Dec 11, 2006I have reconfigure my Cisco 3825 for ssh after we lost the config sue to a power faliure. I have reconfigure the same way it was configured before and working properly.
when I try to access the router using Putty ssh, I get to the authentication screen but after entering uername and password (enable secrete and line password the same) i get access denied.
Below is the ssh and line configuration on the router. I have seen the pdf that has been recommended here at Netpro and have followed that document but still having problem:
[code]...
Linksys Wireless Router :: E4200 Guest Access Won't Ask For Password?
Nov 9, 2011i enable guest access, when connecting though any device it doesn't ask for password but allows access straight away. I've tried changing the password, but no luck.
View 3 Replies View RelatedLinksys Wireless Router :: E4200 Guest Access Without Password?
Feb 7, 2012With the E4200, is it possible to setup the main SSID with a pass pharse but have the guest SSID without a passpharse or password (ie access without security). If so, How?
View 1 Replies View RelatedLinksys Wireless Router :: E3000 - Guest Access Won't Prompt Password Dialogue
Apr 12, 2011For weeks guest access to my e3000 worked fine. Today I have a friend come over, his XP connects to the guest wi-fi, but his computer does not get a prompt for a password.
View 6 Replies View RelatedCisco Wireless :: 891W Guest Vlan Wi-Fi Unable To Access Internet
Apr 8, 2013Any issue creating a guest vlan to use the WIFI on an 891W router? The IOS is version 15.1. I have created discreet Vlan's and setup subinterfaces on both the WLAN_AP0 and GigaEthernet 0 interfaces with dot1q encapsulation. The client will receive an IP from the pool but cannot ping or connect beyond the default gateway.
The external interface is using Nat overload and all wired clients are successful in connecting to outside addresses. I have insert a permit any statement in the acl which affects the external port but still no success.
Cisco Wireless :: 5508WLC Whitelist For Guest Access And Securing Guest-access?
Aug 18, 2011Is it possible to allow certain websites to bypass the web authentication pages, so that they do not need to authenticate to get to our own website, but do have to if they wish to go anywhere else?Looking at a 5508 model at the moment
View 4 Replies View RelatedHow To Get ISP Username And Password
Apr 18, 2012Looking up your ISP, Username and Pw?
View 1 Replies View RelatedWhere To Get Isp Username And Password
Aug 19, 2012i set up my trendnet wirless router but my isp is not working...how can i find my isp username & password on my computer?
View 1 Replies View RelatedDSL Router / Username And Password
Feb 25, 2013What is my dsl router username & password
View 1 Replies View RelatedGet The Username And Password Of Dsl Router?
Nov 11, 2012how can i get the username and password of my dsl router
View 1 Replies View RelatedChange My Username And Password?
Sep 11, 2012i need to change my username and password
View 1 Replies View RelatedWireless :: How To Retrieve Username / Password
Mar 23, 2011I forgot my username and password how can i retrieve my username and password,, i forgot to put password for connection on my wifi.
View 1 Replies View RelatedWay To Find Network Username And Password
Jun 19, 2012Both laptops on home network are Windows 7. Trying to access #2 laptop from #1 laptop. It asks for the Network Username and Password for laptop #2. The network name is 2WIRE_ _ _. How do I find the Network Username and Password?
View 2 Replies View RelatedCisco :: ISP Specifies No Username And Password
Dec 19, 2011I am fairly new to this game of configuring Cisco routers.I've done a three now, the first two were great, they achieved PPP so I was well pleased!The third one is a matter of nightmares. The ISP say there is no need for a username and password?
View 1 Replies View RelatedLinksys Wrt54gs V5 Password / Username?
Dec 11, 2012i just pickup a linksys wrt54gs v5 and I cannot log into it. I reset the modem and tried to log in with the default usr/pass ( usr= leave blank , pass= admin) and it is still not working . I also tried other combination of admin, administraror, password and still nothing. Any usr/password that might work? Also I though of I might get around this problem by flashing to dd-wrt or tomato do I need to do anything in webadmin to do this?
View 6 Replies View RelatedThe Server 192.168.1.1:80 Requires A Username And Password
Oct 29, 2011I just bought a Westell modem 6100 model online, and when I try to change the profile, I get a message saying: The server 192.168.1.1:80 requires a username and password. The server says: Modem Secure."
View 12 Replies View RelatedCan't Connect Even With Correct Username And Password
Apr 14, 2011I am trying to connect to a preferred wireless network. The signal strength is good, and I know for sure that I have the correct username and password.It accepts the password, tries to connect, and then....nothing. I don't get any sort of message explaining why. It just tries to connect to the wireless network, then can't. It keeps trying but I never get to connect, it just says ''acquiring network address'' , and then goes back to nothing.
View 8 Replies View RelatedType A Password And Username To Get Connected?
Jun 24, 2012I use a broadband net connection. DSL Ehernet connection. I need to type a pssword and username to get connected. Anyways, that's not the problem. The problem is after powering on the modemt, the link in my modem starts to blink every 2min. which causes the broken connection. Sometimes I cant even connect to the net because the link doesn't stop to blink.. I'm unable to do anything as the connection keeps going off. There might be a question of down servers, But the others who is using the same plan as mine, not having such trouble.
View 2 Replies View RelatedCisco WAN :: 800 Cannot Remember Username And Password
Oct 22, 2011I have a cisco 800 series router which I configured months back with username and password. Now I wanted to use it recently but cannot remember my username or password.I decided to use rommon to reset the password and during bootup, i hit ctrl+break which took me to rommon mode. Then i used confreg 0x2142 to bypass the startup config. It then told me to reset or power off and on the router which i did. Then on booting up again, it started showing me stuffs like these: [code]
View 7 Replies View RelatedHow To Pass Username And Password In Command Line
Jul 21, 2011I want to telnet a router (say) 1.1.1.1 with usename "user" and password "pass" in command line. i tried using....telnet 1.1.1.1 -l user ..........but not working
View 3 Replies View RelatedLinksys WRT54GS - Username And Password Forgotten
Dec 10, 2011I needed to bring my laptop Toshiba satellite A135 - S4404 computer back to factory settings. When I did I lost my internet connection. I have a wireless G router. I tried setting up a new connection. When I couldnt remember my username and password to the linksys, I made several attempts to give them one.A fool hearty effort on my part. They locked me out. I was given a red X on that particular network. How to get back to where I can give them the necessary username and password?I believe I found it written on my Linksys user guide.
View 8 Replies View RelatedDefault Username And Password For Failsafe Account?
Sep 18, 2012anybody let us know the default username and password for the failsafe account of Summit X450e-48p Extreme Networks Switch.
View 4 Replies View RelatedChange Username And Password - Netgear Extender?
Jan 22, 2013How do I change the username and password on my home wi-fi extender (Netgear). I can't remember my original username and password and it will not let me use the extender until I put it in.
View 3 Replies View RelatedSomeone Is Stealing Wifi / How To Change Username And Password
Dec 17, 2011I want change user name or password, some body stealing my connection.
View 2 Replies View Related