Wireless :: Getting Wifi With Wired Connection?
Mar 26, 2012I have a wired connection & i bought a laptop can i have a wifi & wired connection at same time or can i connect my wireless router to my wired router?
View 2 RepliesI have a wired connection & i bought a laptop can i have a wifi & wired connection at same time or can i connect my wireless router to my wired router?
View 2 RepliesI have a WRT120 wireless router that works fine, but the wired connection has failed. I have restarted the modem, router and the computer and still doesn't recognize the wired connection.
View 9 Replies View RelatedCould I use DHCP for wireless connection and assign private IP for PC for wire connection ?Will it conflict to each other ?
View 3 Replies View RelatedRegion : Belgium
Model : TL-WR1043ND
Hardware Version : V1
Firmware Version : 3.13.12 Build 120405 Rel.33996n
ISP : Telenet
I've just bought a TP-Link TL_WR1043ND and when I was configuring the wireless settings first I had a +- 40Mbps connection,a little later the connection dropped to 4Mbps and was constantly dropping the speed.Sometimes it went to 15Mbps and then it drops back to 4Mbps.Right now its only 1Mbps.
Configuration:
Wireless channel: 11
Mode: 11bgn mixed
Channel width: Auto
Max tx rate: 300Mbps
Wireless router radio and SSID broadcasting enabled
[code].....
Right guys, after looking at a few university's at open days, the one thing I realised is that all the halls of residence only have cabled Internet.Basically you have to plug an Ethernet into your computer/laptop to get online, only problem is, I have recently switched to an iPad. (Wifi only)My idea was to take one of my old wireless routers from home and just plug the Ethernet cable into the router and bingo, I have wireless Internet? Is this correct? If not, can you let me know how I should go about getting wireless Internet in my dorm.
View 2 Replies View RelatedI want to turn off wireless because it interferes with our security camera. We just want to use the wired connections.
View 1 Replies View RelatedI have a laptop connected to internet via a router using WiFi.My desktop computer doesn't have a WiFi connection. I want to connect my laptop and my desktop computer using an ethernet cable in order to access the internet on my desktop computer. I've been fiddling around for over two hours with no luck so far. Both computers are on Windows 7.
View 3 Replies View RelatedI have a WAP54G in my basement shop, wired to our main router upstairs, which is a Linksys BEFSR81. I'm not sure if this is an issue with the WAP or the router.
I only use the laptop computer in the shop every couple of days, but I leave the laptop plugged in and on most of the time. I used to have the power settings such that it didn't power down completely even after a long time. With that setup, if i didn't use the computer for several days, it would find that the connection to the router had died. The wireless link would report that it had a solid connection, but I couldn't connect to anything. Power cycling the WAP always fixed this.
Recently, I decided to save some wear & tear on the laptop drive, and adjusted the power settings to go to standby after a couple of hours. Now, it seems I can't even go one day without losing my connection.
I am running the latest frimware in the WAP, and the router is version 3.1. I can't check the firmware version on the router at the moment, because the web interface is giving me a blank screen. I know from past experience that I will have to power cycle it to get it to talk to me again.
In any event, it seems like the router connection to the WAP is timing out. I set the router "client lease time" up to 10000 a while back when I first had this problem, but that is clearly not doing the trick.
I have an equipment which has LAN port for wired connectivity to the computer. I can connect 10 such equipment thru LAN to the computer & display the data of all the equipments on computer screen. This LAN network I wanna convert to Wi-fi/wireless.
View 4 Replies View Relatedam having speed issues on the wireless side of my WRT54GL v1.1 router.When I hook up a laptop to the wired port, am getting roughly 5.4mps down when wired, but only 1.2mpbs down on wireless. I am tried doing a factory restore. I have made sure that no QoS is in place. I have tried multiple devices to make sure it is not something on the device side causing this problem, but all the devices perform just as poorly on wireless but as well on wired.
View 5 Replies View RelatedI just got an E1200 router and connected wired to my win 7 machine, Im clocking in the single digit ranges (~8 mbs) download but on my dusty old win xp laptop wireless, Im getting 20 mbs (max speed from isp 20 mbs). Wife's Mac laptop wireless, same speed. What is going on? I updated the firmware, tried altering some settings based on other entries here suggested (WPA-personal, channel to "6") but no effect.
View 2 Replies View RelatedDSL modem works fine when connected directly to computer. No internet output from WRT54G wired or wireless, but wireless network is recognized by computer, just no internet. I did a reset and installed the latest firmware, then I ran thru the setup CD that came withe the router, and the internet test said no internet connection was available. Cables are fine, connector innards look clean.
View 4 Replies View RelatedI have a E3200 Router and when the computers are connected directly to router (Wired) the speed is SLOW and when computers are connected via wireless the speed is fast (normal). What can i do to have the wired computer with same fast speed as wireless?....i'm i missing something?Here are the speed results:
All wired computers connections (total of 4) downwload speed ranging from 8 Mbps to 13 Mbps.
All wireless computer connections download speed stable at 49 Mbps.
get a new router. but lets give it a try. I read many many post on how to optimize the speed of the router but none worked so far.I got a great wired Internet connexion hitting between 45 to 60 Mbps[URL] the wifi is crazy slow on Iphone, Macbook pro and iPad staying between 3 to 8 Mbps....
I tried to change all of the specs, did the firmware update. is there a perfect configuration with the new firmware ?
I've got a 2 month old e3000 with the latest firmware. (1.04 i believe) I have run speedtests from wired and wireless machines on my network. All of the wired connections show a speed of around 15Mps (which is consistent with my providers guaranteed speed) but when I test any of the wireless connections I get somewhere between 3 and 7 Mps. I get the same degradation in speed when I stand directly next to the e3000.
Other then SSID and Passphrases I have everything set to the default settings. I have rebooted multiple times with no change. The e3000 is mounted on a 2x4 with several feet of clearance all around and is also located in the coolest part of the house. I am using Speedtest.Net for all the tests.
In the next month or so I plan to replace my old desktop PC. It is currently connected to a Linsys E3200 wireless router. I have many other wireless devices also running off the E3200, but my PC is the only wired device connected to it. When I replace the wired PC do I simply switch the new one in with the existing ethernet connection (I'm sure it is not that simple) or do I have to start over again recreating my entire network..security etc.. ? If so what is the process to start over ? Do I have to reset something on the router, reload cisco connect, create a new network name?
View 4 Replies View RelatedMy newly installed E1200 only sends speeds of about 16 mbps wireless, but sends the ful 60 mpbs when wired. What is going on. Firmware is up to date. Changing the channels didn't do anything. Is there a way to figure out if the problem is with my laptops wireless card.
View 9 Replies View RelatedI've been experiencing a strange, repeatable behavior with my Linksys E1000. I have several wireless and wired devices connected to my E1000:
Wired: TivoHD, Sony BluRay Player, Sony TV, Windows XP Wireless: Lenovo Laptop (Windows 7), HP Laptop (Windows 7), 3 iPods, 2 iPhones
When I try to copy large files (~ 4GB) from my (wired) Windows XP box to either of my (wireless) laptops, the Linksys drops my WiFi network -- but the wired connections continue to work (including internet access). Copying the same/similar file from a WiFi device to a wired device appears to work correctly, as does copying from WiFi to WiFi.
To be clear, my WiFi network "disappears" -- it is no longer listed as an available network (as opposed to just dropping internet connectivity for WiFi). Unplugging the router and plugging it back in brings my WiFi network back up.
I have been able to repeat this issue with multiple files over the course of several weeks, and it happens about 75% of the time (i.e., I am occassionally able to complete a file copy from wired LAN to WiFi).
A little bit of background: I resurrected an old Windows XP box and am using it for shared network storage. I copied about 400 GB of files from my laptops to the XP box (WiFi to wired) with no issues at all. Pulling the same files back from XP to my laptops (wired to WiFi) has been causing the issue described above.
[code]...
I came here after spending a long time of trying to figure out my problem. The problem is, my router will send a signal strong enough to my room because of the thick walls. I have a wire in my room that I connect to my computer for internet. I also have my xbox and other internet enabled devices that I would like to use. Is there some way I could buy a router for my room that gets the internet from a wire? Could I use my computer as a router?
As soon as i modify my wireless to be unsecured, I looy ability to usse me the internet on all wired ports as well as all wireless. From the routers point of view it still has a good solid internet connection. Passes traceroute, but wont allow any wired or wireless connections on the internet. I'm trying to get a Linksys WRE54G v1 to work with this so my parents can have internet once more. If i manualy remove the security to allow the one touch Auto configuration button to work i loose my ability to surf until i run the Cisco Connection software to turn back on the passwords.
View 7 Replies View RelatedI'm able to access the internet through my wireless network on my laptop, but not on the computer I have wired straight to the router. Isn't that weird?
View 2 Replies View RelatedI tried to set up a wireless router yesterday and when trying to connect with my laptop it had limited or no connectivity. I tried a few things but I couldn't get it to work so i switched back to my wired connection. Trying to set up the wireless router is not my concern though at the moment. Now my desktop can connect to the internet but my laptop and ps3 can not obtain an ip address. My desktop does not have a wireless card, thats the only thing I can think of why it will work when the other devices dont.
Right now I have my cable modem hooked up to a D-Link switch with my desktop and laptop connected. The desktop can connect and I get a limited or no activity with my laptop. I have reset the modem multiple times, restarted computers, Right clicked on my connection and tried to repair it, connect the laptop straight to the modem and did all of the above again. The IP and DNS are set to obtain automatically. Nothing is working that I know of but I can plug in my desktop and its up and going in 2 seconds.
The router was a very old one given to me from a friend. Its a Linksys V1. It is not connect to anything or even on now. The last time I tried to use this router I didn't get it to work and this same thing happened. I took it into work the next day and they were able to connect via wireless and wired using my D-Link switch. When I got home it work again just fine.
Just 2 days ago I realized that the wired connection will not let me connect to the internet at all. However, I have a wireless connection and it lets me connect to the internet. I don't like using the wireless connection unless necessary. I tried updating the drivers and troubleshooting, and it still won't connect. It still has that exclamation mark for the wired connection. I use a Windows 7 laptop.
View 17 Replies View RelatedI have wired LAN connection from my neighbour's router, and it is connected to my desktop. I somehow got the wireless connection to my laptop from the same place by entering a security number. I got the number through the wired connection as well. It was working perfectly working until recently. Now I cannot access the wireless, whereas my wired connection is working alright. is there any other way to connect this without asking the neghbour?
View 2 Replies View RelatedI can connect my xbox with the ethernet cable, but i am unable to get it to connect wireless. My laptop & phone are able to connect, I did try the steps such as resetting network configurations, i tried unplugging the router, i know my password is correct. i tried putting in the ip #'s. the xbox is not the only thing that won't connect wireless, neither will the ipod or kobo. it has been suggested that my router may be set for only a certain # of connections?
View 1 Replies View RelatedI recently purchased a 20ft Ethernet cable to speed up my internet connection. On wireless, I would download files at about 2 MB/s. On wired I get 1.5 MB/s. Is it supposed to be like this
View 1 Replies View Relatedi have router and i just wana to know that, how to use wifi in my laptop with any wire connected with it?
View 1 Replies View RelatedMy daughter is going to Uni and has wired ethernet access in her room but no wireless. She would like wireless so a) doesn't have to bother with cables and b) can use the WiFi for her phone.Would it be simple enough to plug a wireless router into this ethernet connection and set up her own SSID/Passwords?
View 2 Replies View Relatedwhy my wireless connection on my laptop is significantly better than my wired connection to my desktop. Internet ran just fine on the desktop at my old apartment; got to the new place, and now it's having serious issues.
After working on this problem for a while, I have come to the conclusion that for some reason, I am getting serious packet loss, consistently, at a particular "hop" on my desktop, which is not present on the laptop.Here are the Line Quality tests that illustrate the problem better than I could ever describe it in words:
Laptop: Line quality test packet loss and latency | DSLReports.com, ISP Information
Desktop: Line quality test packet loss and latency | DSLReports.com, ISP Information(and it appears they both fail the initial test, but the laptop connection runs just fine).
So at that one specific hop (ae-1-0.cr0.chi10.tbone.rr.com, I have no idea what that means), my desktop connection suffers serious packet loss while the laptop is more or less OK.This discrepancy is evident in the quality of connection on my desktop, while the laptop runs just fine. Here, in summary, is what I have tried:
-Going wired through laptop using same cables, ports, and router as desktop: laptop performs flawlessly.
-Updating router firmware, NIC card drivers, and Windows on the desktop
-Full virus disk scan and boot scan using Avast; full malware scan using Malwarebytes; Windows disk defrag
-Disabling QoS packet scheduler
-Performing netsh /flushdns; winsock reset; ipconfig release, renew
-(Temporarily) disabling Antivirus program
All of these actions together have made the desktop connection USABLE... however it is by no means an acceptable level of quality for a cable connection, and not nearly as good as any other in the apartment gets using the same connection, whether wired or wireless.The only visible difference I can find between the laptop and the desktop is the packet loss that is present at that one hop in particular, which is extremely debilitating for the desktop's connection.
Further info:
Desktop specs:
Realtek PCIe GBE Family Controller NIC (onboard on the mobo)
Windows XP Home Edition Version 2002 SP3
Intel Core 2 Duo E8400, 3GHz
2 GB Ram
Plenty of Disk space
Router:
Belkin F5D9230-4 Wireless G Plus MIMO Router
Here is the previous thread that details my troubleshooting efforts thus far; as the question has now become something entirely different, I thought it more appropriate to make a new thread.
Wiresless faster than wired connection
I have 3 PCs (win7-64) connected to a wired gigabit network to achieve fast transfer of large files. Separately, at a distance, I have a modem-router to access the Internet. Internet access for the 3 PCs is achieved with each PC connected wireless to the latter modem router. The 2 networks are running OK and PCs can connect each other on both networks. Question: How can I know and achieve that the gigabit network is used for file transfers and not the slower wireless network? How should configure both routers and PCs to achieve this? I don't need the wireless setup to be a network, just to provide wireless access for each PC and that's it. I used to have the gigabit LAN configured with a Dlink DAP1522 bridge that created a single wireless connection between this wired LAn and the modem-router but it stopped working and I'm pretty done with it.
View 10 Replies View RelatedOnce again the sun sinks into its nightly reprieve; for the third time since I first set out on this mission. Before me, only the piercing glows of monitors that sting my eyes. Yet, I cannot look away. The clacking of keys, once triumphant battle drums of purpose, has grown sharp. They pierce my ears and my mind. It would be madness to continue. My body is weak. My resolve is waning. My sanity ...... tenuous. But if seeing this through means madness.....bring on the madness.
I'm trying to find a way to network my desktop (wired) and my laptop (wifi) so that I can swap files between the two easily. I've mostly been attempting this through Windows Homegroup, although I've also downloaded and installed TeamViewer. The thing is, the two just will not connect. After much poking around I found the specific symptom to be that wired connections and wireless connections refuse to speak. My laptop sees my roomie's laptop easily enough, though. And if I hardline my laptop to the router suddenly their best friends! - joining each others' Homegroup, swapping files, trading recipes!
Points of interest: I've noticed that, while both are enabled, only IPv4 connectivity indicates internet access; IPv6 says No Internet Access. Pings from one machine to the other result in "Request timed out" or "Destination Host Unreachable." I've disabled firewalls - Windows and the one on the router. Disabled and then uninstalled anti-virus. I've updated the router firmware and net adapter drivers I tried restoring router to factory settings, in case I changed something I shouldn't have along the way. I've alternated static and dynamic ip addresses - no difference there. I've just spotted a couple of errors in the Event Viewer that look like they could be leads;(!)ErrorDhcp-Client The IP address lease 192.168.2.2 for the Network Card with network address 0x6CF049E337F0 has been denied by the DHCP server 192.168.2.1 (The DHCP Server sent a DHCPNACK message).
[code]...
My computer is directly wired to a wireless modem and an unsecured wirelss connection is available. Is the directly wired computer secure?
View 1 Replies View RelatedI am getting ready to move into new digs and wanting to set up my network. Main house cable internet will come in with modum to a dlink router for both wired and wireless. desktop and a magic jack wired into router wireless for ipad and laptop. then run wire to workshop about 100' from house where a second magic jack and desktop will be set up (small biz out of workshop). I am pretty sure that the range of the router for wireless will reach to workshop fine for ipad but if not I will need to put a wireless up there tooext kids have a laptop running windows 7 but kids being kids and having had problems with self control on net in past I want to be able to make sure that I can turn them off from net when needed because
1. I do not want them running me past the data limits imposed by cable company and
2. keep them from sites such as those which got them in trouble in the past (kids are older and bought laptop for selves and pop will not go along with me confiscating it if they abuse internet privileges