3100 - No Support Of Radius Security On Wireless Adapter
Jan 6, 2013
I recently got a refurbished external (USB) wireless adapter by Netgear. It's the WNA3100 but who knows what they did to it while refurbishing it.
I tried using it to connect to the wireless network at my university, and I got the above-displayed error. So what's the deal? This RADIUS thing is not a new technology, right? So any modern wireless adapter should be able to handle it. Why would this thing not support it?
Secondly, if it doesn't work, that's alright. I need a second wireless adapter anyway, so I could use this one at home where the RADIUS thing is not an issue. But how do I make sure this does not happen again with another one that I buy? I can't seem to find anywhere in the specs anything about this compatibility. For instance, I believe I want to get this one next:URL
View 15 Replies
ADVERTISEMENT
Oct 9, 2012
I'm running version 7.2.111.3 on my WLC 5508 and I try to figure out how I can set PEAP towards my configurerd Radius servers. On my Local EAP profile I can specify PEAP, but how is it default configurerd when you just specify the radius servers on the "WLANs > Edit Test > security > AAA servers tab ?
The MS radius logs tell me that it is EAP and not PEAP, so the questions is does the WLC support Microsoft: Protected EAP ???
Dot1x_NW_MsgTask_0: Oct 10 11:02:27.279: 24:77:03:07:75:28 AAA EAP Packet created request = 0x1bd4647c.. !!!! -> should be AAA PEAP ?
*Dot1x_NW_MsgTask_0: Oct 10 11:02:27.279: 24:77:03:07:75:28 Sending EAP Attribute (code=2, length=35, id=2) for mobile 24:77:03:07:75:28*Dot1x_NW_MsgTask_0: Oct 10 11:02:27.280: 24:77:03:07:75:28 [BE-req] Radius EAP/Local WLAN 3.
View 6 Replies
View Related
Jan 23, 2013
I am trying to follow the Fips guide for the WLC5508 and it wants to encrypt the connection to the Radius, either with PSK key wrap or IPsec. I have the options for Ipsec only as the Windoes NPS does not support Key wrap from what a previous user confirmed for me here on the board.. But then found another post that states that the 5508 does not support IPsec?
View 5 Replies
View Related
Sep 28, 2012
We are Deploying New Stand Alone AP (Model:AIR-AP1142N-N-K9) in our infrastrucuture, through out our network, we used 802.11G Adapter for Wifi Clients throughout,
Coulple of Questions i Have,
1) In This New Access point i found only Radio0 -802.11N 2.4 Ghz & 5 Ghz , whether this Model AIR-AP1142N-N-K9 will Support 802.11G Adapters?
2) if Clients Comes up with 802.11 G Adapter will it Negotiate and Connect to it?, through out worldwide our network Wifi Clients used 802.11g network to Connect to wifi Network.
3) Also from Client PC is there a way to find what network adapter its running?
4) Correct me if i am wrong , if Client Laptops having G adapter, i Hope it will not Connect To Access point with N Adapter?
5) if these Access point Does not support G adapter, any way to upgrade or downgrade to other IOS to make this access point support G Adapters?
View 4 Replies
View Related
Feb 21, 2013
I have recently bought a Atheros AR922X Wireless Network Adapter and I have had problems with connecting to a 5GHz router. When I connect windows connects fine but the router changes to a 2.4GHz.So Does The Atheros AR922X Wireless Network Adapter Support 5GHz Internet Connections?
View 2 Replies
View Related
Nov 4, 2012
In our Environment we used to Connect to wifi using Radius Authentication Through AD Account (Encryption: TKIP and CIpher, Authentication Open+EAP and Network EAP, Key management WPA) this settings which will be done And pushed through AD Itself.We Use CIsco 1130AG, 1200 Series in most of the areas which have no Issues.But We Have Some trouble with Cisco WAP4410N Access point.In This Access point users were not able to Connect to wifi through Radius Authentication.However users were able to Connect to these Access point, but it is unsecured, whoever configure's the correct client settings in their PC. They can connect to SSID. This Access point is capable of supporting Radius Authentication?
View 4 Replies
View Related
Jan 11, 2012
DLink DGS-3100 POE switches? I'm working for a place that has these and they are wanting to invest in a VOIP system. I've never seen these type of switches before, and would like some feed back before I roll out a 70+ phone VOIP system. They are managed switches but are all running un-managed at the moment.
They are also using a Fortigate 80cm Firewall/Router. I'm not familiar with this device either.
I'm missing layer 3 as I can't setup any VLan's with this equipment.
View 7 Replies
View Related
Aug 13, 2012
I'm able to setup my 3750e switch to login through a radius server with my company user id and password but would like to be able to set it up that when I log in it drops me on the enable prompt. Right now I have to type >en.Then the enable password.
View 1 Replies
View Related
Dec 2, 2012
I have a Cisco Catalyst 3100 blade in a Dell server chassis that is trunked to a 6509.
When doing a protocol capture, I see large frames being sent from one of the servers in the chassis.
Example:
TCP:[Continuation to #1701] [Bad CheckSum]Flags=...AP..., SrcPort=HTTP(80), DstPort=2667, PayloadLen=2831, Seq=1489611217 - 1489614048, Ack=1719592331, Win=65535
I see lengths up to 6900+ bites coming from the server.
The switch has the global MTU set to 1500
system mtu routing 1500
and I can't seem to set this at the interface level. The server is configured to send 1500 length frames. Why am I seeing these jumbos? (the server is Windows 2003)
View 2 Replies
View Related
May 27, 2010
I have a 3750 switch stack running version 12.2(53)SE2 IPBASEK9-M. I have dot1x configured on the switch and have a Windows 7 PC connected with 802.1x configured on the interface. I see the EAPoL start message from the PC, but I don't see any RADIUS packets from the switch to the RADIUS server. I have a simple dot1x config just to try to get it working prior to adding additional features such as guest-vlan...
Config and debug file attached.
I don't know if the ip dhcp snooping and arp inspection configuration is causing an issue with this or not. I see the EAPoL packet received on the switch as seen in the debug attachment, but I still never see the RADIUS packet. I did set both to trust on the interface but still the same outcome. I can't disable it since it is a production switch with a test interface.
View 5 Replies
View Related
Aug 13, 2012
'm able to setup my 3750e switch to login through a radius server with my company user id and password but would like to be able to set it up that when I log in it drops me on the enable prompt. Right now I have to type >en.Then the enable password.
View 1 Replies
View Related
Dec 26, 2011
Using a Dell Dimension 3100/E350, where do I connect the Ethernet cable from Netgear router.
View 1 Replies
View Related
Dec 13, 2011
One of my client want to upgrade its already installed ASA5540-bun-k9 by adding CSC-20 Module. As per below link CSC-20 is supported with ASA5540. but for any reason the ASA5540 bundle option with CSC Module is not available that create confusion.Will CSC-20 Module work with ASA5540-bun-k9 [URL]
View 2 Replies
View Related
Apr 19, 2011
My company has started the migration from Windows 2003 to 2008 R2. Will my ACS Express boxes (currently running 5.0.1) ever have an upgrade option to work with 2008 R2? Do I need to trash the ACS Express appliances for some other solution?
View 3 Replies
View Related
Nov 18, 2011
i have asa 5505 adaptive security plus. and i have only 3 vlans . outside , inside , DMZ restricted.so it's working fine but i want to connect to my inside another private network, or do i need to buy License.and how i can activate the license key.
View 4 Replies
View Related
Jan 25, 2012
I have a new BGP configuration that consists of two asa 5510 and two routers 2911 at the back. My question is : Does asa 5510 support BGP?
View 1 Replies
View Related
Apr 20, 2011
Which IOS version of 3560-X switch support NAC-L2-IP ?
View 1 Replies
View Related
May 17, 2012
we have installed nac for our customer and it works fine ,but the customer want the change the version of kaspersky antivirus from 6 to 8 end point security ,when we have try this the nac agent does not find the antivrus on the the workstation . i want to know if this version of kasoersky (end point security ) is supported by nac ,if no is ther a solution to make it works with the NAC .
View 3 Replies
View Related
Feb 21, 2013
where can I find my network security key to set up wireless USB adapter
View 1 Replies
View Related
Apr 26, 2011
Just want to check out, does the non-Microsoft based OS client OS (Example: MacOS, Ubuntu, Android) support anyconnect v3.0 And also if my RADIUS server is host using window server 2008 Network Policy Server (NPS) component, can this doing the 802.1X authenticating?
View 1 Replies
View Related
Feb 12, 2004
i want to know if the new Catalyst 3750 Support Private Vlan ?
or any other small Switches
View 3 Replies
View Related
Nov 22, 2006
one of my router are scanned by Foundstone and get an alert :
""The SSH2 protocol specification requires that a SSH2 server support the diffie-hellman-group1-sha1 key exchange algorithm. This key exchange algorithm is considered strong, but faces a potential weakness in that the same prime number is used for all key exchanges."
SO wanna check if cisco SSH2 can support the diffie-hellman-exchange-group-sha1? If yes, which IOS version required?
View 2 Replies
View Related
Dec 17, 2012
Is it possible to cisco 1941 security bundle router Support minimum of 2k of VLANs ID and shall support upto 60 vlans?
View 4 Replies
View Related
Aug 7, 2012
I have a customer that wants to purchase an ASA 5510 security plus to terminate client VPN access for an external support team. The customer claims to want URL content filtering/proxy which leads me to suggest a CSC SSM 20 plus module. But upon further conversation, he mentioned wanting IPS. In this case, the customer does not seem to know the difference between the URL content filter/proxy and the IPS and uses both terms interchangably.
1. What would you suggest in your expert opinion would be the best module to get for this customer? IPS or CSC
2. If I go with the CSC module, where can I find good documentation on how to configure it and get it up to date?
3. does the CSC module provide any web proxy functionality?
View 3 Replies
View Related
Feb 5, 2007
I've installed version 4.8.02.0010 of the VPN client onto a Dell Latitude D820 laptop. When I attempt to connect, I get this message. There are no firewalls running (I disabled the Windows XP firewall) and I'm running under Service Pack 2 with all of the latest security patches from Microsoft.
I even tried un-installing the client and using an older version (4.8.00.0440) and it reports a similar error in the Log file.
I'd prefer to NOT have to wipe the laptop and reinstall the O/S if I don't have to. This is the only laptop that I've experienced this problem with but it's also the first Dell Latitude D820 that I've attempted to install the client on.
Is there a problem with the Dell Latitudes and the VPN Client? Is there another way around this other than a wipe and re-install?
View 3 Replies
View Related
Feb 16, 2011
can wireless router support up to 100 user including support network printer
View 1 Replies
View Related
Mar 29, 2012
I have a Linksys WRT610N wireless system with WPA-PSK security and this works fine with several computers but now one computer detects the wireless security as WEP and can thus not connect to the router. I have tried to manually connect to the router with correct security WPA-Personal (TKIP) and correct password but then the computer says "settings saved on this computer for the network do not match the requirements of the network".How can I get the computer to detect the correct security? The computer is running Windows 7 home premium.
View 7 Replies
View Related
Jan 19, 2013
I am trying to connect to a Security-enabled wireless netowork. I have the key. My problem is that I can't seem to figure out how to enter it. When I try to connect I open the "view available networks"window. I see the network name and it shows a strong signal (all 5 green bars).
View 3 Replies
View Related
Apr 20, 2013
Some security tools and techniques for wireless LAN??
View 1 Replies
View Related
Feb 1, 2012
i have configured 35 APs 3502i in 5508 WLC, now i want to get access to ap via radius. Currently i can connect to them via SSH with both user and password set in wireless> access point > global configuration, well, how do i configure the management AP user through RADIUS?
View 2 Replies
View Related
Jul 4, 2012
how to setup ACS 5.3 to authenticate wireless users over radius? I currently have the SSID pointing to a Microsoft IAS server and would like to move the authentication to be done via ACS.
View 1 Replies
View Related
Feb 9, 2011
I have 3 Cisco 1242 WAPs that I have deployed at a site that has NO RADIUS/AAA devices. I have given all of them a different channel (1,6,11), but the same SSID and crypto (WPA2-PSK). The issue is when a machine boots up it associates with the closest/strongest AP, but as the device "roams" it does not which to a different AP. It stays associated with the original AP until that signal is gone. Then it quickly associates with the closest AP with no problem.
How do I get the device to associate with the strongest WAP? I have research "fast roaming and WDS" but it seems like you need EAP/LEAP and they do NOT have that at all.
View 3 Replies
View Related
Jun 5, 2013
I have a WLAN configured with 802.1x PEAP pointing to an external RADIUS server. It works fine for the most part, but I'm having problem closing accounting sessions in RADIUS. I've found this is related to the client table in the WLC. The user session does not end in RADIUS unless the WLC officially removes the client from the db, which takes 5-6 minutes from what I can see (probably due to the default idle timeout of 300 seconds).
For example:
1. I connect my tablet to the test WLAN. It associates and authenticates successfully and the WLC sends the accounting info to my RADIUS server, opening up a user session. If I turn off the wifi in the tablet, the client entry stays in the WLC client table until it times out. The WLC removes my tablet from the client table after 5-6 minutes, and then the session closes in the accounting table. I can force the session to close much earlier by manually removing the client from the WLC.
2. Same as #1, but this time instead of turning of the wifi in the tablet, I choose to connect to a different WLAN in the WLC. The user session in the accounting DB never closes. If I reconnect back to the original test WLAN with 802.1x, it opens up yet another user session in RADIUS accounting. Now I have a "dead" user session in accounting that is going to be open forever unless I delete it from SQL.
Is this an issue with the end user client not sending the disassociation frame properly, or a config problem with the WLC? How can I make it so that every time a client drops from an AP or moves to a different WLAN, the WLC would immediately send accounting updates to my RADIUS server and close the user session properly?
View 1 Replies
View Related
