My company has started the migration from Windows 2003 to 2008 R2. Will my ACS Express boxes (currently running 5.0.1) ever have an upgrade option to work with 2008 R2? Do I need to trash the ACS Express appliances for some other solution?
View 3 RepliesJust want to check out, does the non-Microsoft based OS client OS (Example: MacOS, Ubuntu, Android) support anyconnect v3.0 And also if my RADIUS server is host using window server 2008 Network Policy Server (NPS) component, can this doing the 802.1X authenticating?
View 1 Replies View RelatedDoes LMS 4.0 support Windows Server 2008 R2 Standard Edition (64-bit )?Is necessary for a fresh installation to download and install the Windows 2008 R2 patch?
View 2 Replies View RelatedWhether ACS Se and Remote Agent 4.2.1.15.4 supports Windows 2008 R2.
View 6 Replies View RelatedDo you know if the NAC Manager supports SSO and LDAP authentication with Windows 2008 R2 Active Directory?
View 3 Replies View RelatedI´m looking at this document: [URL] and I´m not clear if Windows Server 2008 R2 Standard with SP1 is supported. The documentation refers to Windows 2008 Server SP2 and Windows 2008 Server R2, but I see no specific mention to Windows Server 2008 R2 Standard with SP1.
View 0 Replies View Relatedi need to know if i can integrate Single Sign On to my Cisco VPN Client v.5 with my Active Directory which run on windows 2008
View 2 Replies View RelatedI planned to install a LMS 4.0.1 on a VMWare server with Windows 2008 R2 64bits.
Is it supported with the "Windows 2008 R2" patch or do I need to order LMS 4.1 version ?
One of my client want to upgrade its already installed ASA5540-bun-k9 by adding CSC-20 Module. As per below link CSC-20 is supported with ASA5540. but for any reason the ASA5540 bundle option with CSC Module is not available that create confusion.Will CSC-20 Module work with ASA5540-bun-k9 [URL]
View 2 Replies View Relatedi have asa 5505 adaptive security plus. and i have only 3 vlans . outside , inside , DMZ restricted.so it's working fine but i want to connect to my inside another private network, or do i need to buy License.and how i can activate the license key.
View 4 Replies View RelatedI have a new BGP configuration that consists of two asa 5510 and two routers 2911 at the back. My question is : Does asa 5510 support BGP?
View 1 Replies View RelatedWhich IOS version of 3560-X switch support NAC-L2-IP ?
View 1 Replies View Relatedwe have installed nac for our customer and it works fine ,but the customer want the change the version of kaspersky antivirus from 6 to 8 end point security ,when we have try this the nac agent does not find the antivrus on the the workstation . i want to know if this version of kasoersky (end point security ) is supported by nac ,if no is ther a solution to make it works with the NAC .
View 3 Replies View Relatedi want to know if the new Catalyst 3750 Support Private Vlan ?
or any other small Switches
I recently got a refurbished external (USB) wireless adapter by Netgear. It's the WNA3100 but who knows what they did to it while refurbishing it.
I tried using it to connect to the wireless network at my university, and I got the above-displayed error. So what's the deal? This RADIUS thing is not a new technology, right? So any modern wireless adapter should be able to handle it. Why would this thing not support it?
Secondly, if it doesn't work, that's alright. I need a second wireless adapter anyway, so I could use this one at home where the RADIUS thing is not an issue. But how do I make sure this does not happen again with another one that I buy? I can't seem to find anywhere in the specs anything about this compatibility. For instance, I believe I want to get this one next:URL
one of my router are scanned by Foundstone and get an alert :
""The SSH2 protocol specification requires that a SSH2 server support the diffie-hellman-group1-sha1 key exchange algorithm. This key exchange algorithm is considered strong, but faces a potential weakness in that the same prime number is used for all key exchanges."
SO wanna check if cisco SSH2 can support the diffie-hellman-exchange-group-sha1? If yes, which IOS version required?
Is it possible to cisco 1941 security bundle router Support minimum of 2k of VLANs ID and shall support upto 60 vlans?
View 4 Replies View RelatedI have a customer that wants to purchase an ASA 5510 security plus to terminate client VPN access for an external support team. The customer claims to want URL content filtering/proxy which leads me to suggest a CSC SSM 20 plus module. But upon further conversation, he mentioned wanting IPS. In this case, the customer does not seem to know the difference between the URL content filter/proxy and the IPS and uses both terms interchangably.
1. What would you suggest in your expert opinion would be the best module to get for this customer? IPS or CSC
2. If I go with the CSC module, where can I find good documentation on how to configure it and get it up to date?
3. does the CSC module provide any web proxy functionality?
Does the ACS Express have the same GUI interface that the full ACS appliance? I mean if I know one I know the other?
View 4 Replies View RelatedI have acquired a Cisco 881 router and have installed CCP express onto it. The router is set to factory default and I am using IE9, Java is also installed.i try to log in using the default IP of 10.10.10.1 through the browser and the log in box pops up, I type the default "cisco - cisco" to log in, the box disappears but then nothing, just a blank browser page, CCP express refuses to boot up.PC's firewall and security programs are turned off.Pop up blockers are deactivated in browser.Flash is installed.I've tried downgrading my version of Java to various versions and doing a hard reset but still no luck.I've tried CCP Express versions 2.6 & 2.7.I have tried from 2 different PCs.I have also tried from Firefox with the same result.I am able to access the router from console and CCP full version.
View 10 Replies View RelatedI managed to get an AIM-CUE for my 2801 router. I upgraded from version 3 to version 7.1.5. then realised I can't licence it without buying mailbox licences from Cisco (working on a budget for a lab) I tired to downgrade but I get the error
View 1 Replies View RelatedI had the Cisco 877W Router working in my old company. The old company was closed and I bring all of network equirments to new company.I am trying to setup this router to new company but lost menu, console cable and software CD.
View 2 Replies View RelatedI have been having some issues with an ACS express joining a domain. This device previously had joined and after a weekend we received a notice that users were not authenticating to the domain. This in turn let us to find out the the device was unable to join the domain. Further research led us to find that the account the device was using to join the domain had been disabled. However, after re-enabling the account we would only recieve domain timeouts when tried to join. I opened a case with cisco and we have tried everything under the sun to no avail. I can ping the AD server (name & ip) from the ACS express. Cisco apply a root patch that allowed us to create hosts file entries on the device. I checked the system time and made sure it was within 5 minutes of the Domain controller time. In the logs of the ACS express the only thing I can really find is:
-"Checking remote join status: SMB connectivity failed"
-"Timeout reached in getting AD Diag info"
"acsxp/server Warning Server 0 is DisconnectedMode, IOException for reason, ipc socket connect; No such file or directory:
Recently we re-imaged the ACS and tried to join the domain without the old config on it and just received the same error. I reloaded the backup after that which also resulted in no change. I am starting to think that there is more of a domain issue rather than networking but am having issues finding a way to prove this via the logs. The are other ACS's configured in the network and the settings on this device match the settings on the other device in the network which are working correctly.
We are switching over to a new ISP and the settings from the old ISP Statstic IP,DNS, is on the Cisco 891 router. Question can I just edit the settings that are already on the Cisco 891 router. I clicked on the CCP exress Went to the Task Internet(Wan) Address type is set for Static IP which I can change and the subnet I can change. In the DHCP it is enable DHCP server on the Lan interface VLan1 and I want to keep the Starting IP address and Ending IP address. For the Section DOmain Name Server (DNS) Primary DNS and Secondary DNS I can change it. Where do I type in the Gateway address. I clicked on the Routing and I only see checked Enable dfault Route and checked INterface Fastethernet8. I don't anywhere that I need to type in the Gateway address anywhere in the CCP Express.
View 3 Replies View RelatedI have a new 1921 router and when I try to use CP Express I get a Microsoft Internet Explorer error. Cisco CP Express Application could not be launced. If CP Epress is launched using https try the following steps and relaunch CP Express.
Disable TLS option in JRE Settings[Java Control Panel->Advanced ->Security]I have done this and still get the same error. I initially used the console port and assigned a user name and password per the warning message.
I normally use command line entries to setup my routers but this is first new router I have gotten in some time and am not familliar with the CP Express and thougt I would try it. Is there a way to load a default program that does not have all the CP Express data in it without manually removing it?
Is there a PCI Express 2.0 Gigabit ethernet card [NIC] which i can install in this motherboard where usually one installs NVIDIA graphic cards?
View 4 Replies View RelatedI have a motherboard intel DG41RQ and it has a built in lan card but i wanted to put another lan card via the PCI express slot and i put it and the flash lights on the network card are flashing but still the hardware manager and everything on the computer haven't even noticed that i put a new hardware.
View 36 Replies View RelatedI have a WLSE Express 1030 which is not booting. The error is "GRUB loading, please wait... Error 17". The error is a mount error for the partition. I don't have a recovery disk and I am not authorised to download the disk.
View 1 Replies View Relatedis there a discover tool for such a switch, i forgot the assigned ip .
View 2 Replies View RelatedI am trying to upgrade CP Express to 2.5 and after the upgrade I bring up the webpage to login and I am prompted for my credentials, I enter them and I am authenticated. However the CP Express home page never loads. I have tried to reload 2.0 but it does the same thing.
View 3 Replies View RelatedI set up a basic Linksys E2500 with the following information and connected to the internet straight away without a problem: I have spent several hours simply trying to get this basic information into the Cisco 819 using CP Express without success, i.e. I get no internet. Rather than show my inputs, What is the correct setup. I am a novice so I'd rather solve this issue using CP Express just to get connected in the first instance. I have a static IP address, I connected the ethernet cable carrying the internet to the internet port of the E2500 and an ethernet cable from one of the ethernet ports of the E2500 to my PC. For the 819, I connected the internet cable to the GE WAN 0 port and the PC to one of the FE ports.
View 18 Replies View RelatedDoes the autonomous Cisco WAP4410N Wireless-N Access Point could be managed using Cisco Works WLSE Express.
View 1 Replies View RelatedI have one out of three Catalyst Express 520's I cannot connect to with Cisco Configuration Assistant or with a browser. I've used Wireshark to capture the problem, and it sends a TCP RST packet immediately upon any such connection attempt.
As these devices do not have a console port, how can I gain access to the device? We'd like to upgrade them but cannot pull the existing config.
Since these 520's don't support or are not configured for telnet/ssh and the only connection I can make is with a broswer and CCA, I'm wondering if there is a way to get the config into a text file as normally done.