Cisco WAN :: 1921 CP Express Application Could Not Be Launched
Dec 17, 2012
I have a new 1921 router and when I try to use CP Express I get a Microsoft Internet Explorer error. Cisco CP Express Application could not be launced. If CP Epress is launched using https try the following steps and relaunch CP Express.
Disable TLS option in JRE Settings[Java Control Panel->Advanced ->Security]I have done this and still get the same error. I initially used the console port and assigned a user name and password per the warning message.
I normally use command line entries to setup my routers but this is first new router I have gotten in some time and am not familliar with the CP Express and thougt I would try it. Is there a way to load a default program that does not have all the CP Express data in it without manually removing it?
View 1 Replies
ADVERTISEMENT
Apr 19, 2012
I have problem in recently installed LMS 4.1 Device discovery will not start when launched manually. When i hit the button, it doesn't even give a popup window saying that the discovery is started and that email will be sent... If I schedule it is launched, runs and finishes correctly. All proceses are started and it seems that application is working ok. LMS is installed on Win 2008 R2.
View 1 Replies
View Related
Feb 26, 2013
I am running WinXP Pro on a netbook which I have set up as a host with Real VNC. I connect well from all my Win 7 PC's. I do not want to just have remote access to that netbook. I would like to launch an application (which runs from MySQL) from the host which I can then use on the remote PC's display without that app actually launching and displaying on the host computer. At the moment, I can only see the desktop and remotely control it. Multiple connections are accepted but all see the same desktop
View 3 Replies
View Related
Nov 27, 2011
my net book does not launch WiFi on startup. Wireless assistant button's light is not on. when i launch my comp it says me module(701) error.
View 1 Replies
View Related
Oct 5, 2012
We want to puchase new Cisco ISR 1921/K9 . i want to know does it support the following sample IP-SLA commands
ip sla 2icmp-echo 172.16.1.2timeout 500frequency 1ip sla schedule 2 life forever start-time now
track 10 rtr 1 reachability
delay down 1 up 1
!
track 20 rtr 2 reachability
delay down 1 up 1
ip route 0.0.0.0 0.0.0.0 192.168.1.2 track 10ip route 0.0.0.0 0.0.0.0 172.16.1.2 track 20
Im asking above question because we will need to enable ip-sla on the mentioned router. as i read on the cisco webside, it says Cisco-ISR-1921/K9-IP Base support only IP-SLA RESPONDER feature nothing else. If Cisco-921/K9 does not support the above commands , should i go for ordering Cisco-1921-SEC/K9 ?
View 4 Replies
View Related
Jun 13, 2012
Does the ACS Express have the same GUI interface that the full ACS appliance? I mean if I know one I know the other?
View 4 Replies
View Related
Nov 26, 2012
I have acquired a Cisco 881 router and have installed CCP express onto it. The router is set to factory default and I am using IE9, Java is also installed.i try to log in using the default IP of 10.10.10.1 through the browser and the log in box pops up, I type the default "cisco - cisco" to log in, the box disappears but then nothing, just a blank browser page, CCP express refuses to boot up.PC's firewall and security programs are turned off.Pop up blockers are deactivated in browser.Flash is installed.I've tried downgrading my version of Java to various versions and doing a hard reset but still no luck.I've tried CCP Express versions 2.6 & 2.7.I have tried from 2 different PCs.I have also tried from Firefox with the same result.I am able to access the router from console and CCP full version.
View 10 Replies
View Related
Nov 13, 2011
I managed to get an AIM-CUE for my 2801 router. I upgraded from version 3 to version 7.1.5. then realised I can't licence it without buying mailbox licences from Cisco (working on a budget for a lab) I tired to downgrade but I get the error
View 1 Replies
View Related
Nov 7, 2011
I had the Cisco 877W Router working in my old company. The old company was closed and I bring all of network equirments to new company.I am trying to setup this router to new company but lost menu, console cable and software CD.
View 2 Replies
View Related
Apr 19, 2011
My company has started the migration from Windows 2003 to 2008 R2. Will my ACS Express boxes (currently running 5.0.1) ever have an upgrade option to work with 2008 R2? Do I need to trash the ACS Express appliances for some other solution?
View 3 Replies
View Related
Dec 18, 2011
I have been having some issues with an ACS express joining a domain. This device previously had joined and after a weekend we received a notice that users were not authenticating to the domain. This in turn let us to find out the the device was unable to join the domain. Further research led us to find that the account the device was using to join the domain had been disabled. However, after re-enabling the account we would only recieve domain timeouts when tried to join. I opened a case with cisco and we have tried everything under the sun to no avail. I can ping the AD server (name & ip) from the ACS express. Cisco apply a root patch that allowed us to create hosts file entries on the device. I checked the system time and made sure it was within 5 minutes of the Domain controller time. In the logs of the ACS express the only thing I can really find is:
-"Checking remote join status: SMB connectivity failed"
-"Timeout reached in getting AD Diag info"
"acsxp/server Warning Server 0 is DisconnectedMode, IOException for reason, ipc socket connect; No such file or directory:
Recently we re-imaged the ACS and tried to join the domain without the old config on it and just received the same error. I reloaded the backup after that which also resulted in no change. I am starting to think that there is more of a domain issue rather than networking but am having issues finding a way to prove this via the logs. The are other ACS's configured in the network and the settings on this device match the settings on the other device in the network which are working correctly.
View 1 Replies
View Related
Jul 6, 2011
We are switching over to a new ISP and the settings from the old ISP Statstic IP,DNS, is on the Cisco 891 router. Question can I just edit the settings that are already on the Cisco 891 router. I clicked on the CCP exress Went to the Task Internet(Wan) Address type is set for Static IP which I can change and the subnet I can change. In the DHCP it is enable DHCP server on the Lan interface VLan1 and I want to keep the Starting IP address and Ending IP address. For the Section DOmain Name Server (DNS) Primary DNS and Secondary DNS I can change it. Where do I type in the Gateway address. I clicked on the Routing and I only see checked Enable dfault Route and checked INterface Fastethernet8. I don't anywhere that I need to type in the Gateway address anywhere in the CCP Express.
View 3 Replies
View Related
Dec 3, 2012
Everytime I make a config change to one of the contexts on our ACE20, I get this message: Config Application in Progress. This command is queued to the system
If I run show download info, I get:
context : context1
Interface Download-status
--------------------------------------------------------------
187 In Progress
199 Pending
Regex download optimization status : Couldn't get status[TNRPC Timed out]
It eventually seems to complete, but it takes a very, very long time. We are running Version A2(3.5) [build 3.0(0)A2(3.5)].
View 2 Replies
View Related
Sep 24, 2011
Is there a PCI Express 2.0 Gigabit ethernet card [NIC] which i can install in this motherboard where usually one installs NVIDIA graphic cards?
View 4 Replies
View Related
May 22, 2012
I have a motherboard intel DG41RQ and it has a built in lan card but i wanted to put another lan card via the PCI express slot and i put it and the flash lights on the network card are flashing but still the hardware manager and everything on the computer haven't even noticed that i put a new hardware.
View 36 Replies
View Related
Feb 13, 2011
I have a WLSE Express 1030 which is not booting. The error is "GRUB loading, please wait... Error 17". The error is a mount error for the partition. I don't have a recovery disk and I am not authorised to download the disk.
View 1 Replies
View Related
Jun 18, 2012
is there a discover tool for such a switch, i forgot the assigned ip .
View 2 Replies
View Related
Aug 13, 2011
I am trying to upgrade CP Express to 2.5 and after the upgrade I bring up the webpage to login and I am prompted for my credentials, I enter them and I am authenticated. However the CP Express home page never loads. I have tried to reload 2.0 but it does the same thing.
View 3 Replies
View Related
Aug 12, 2012
I set up a basic Linksys E2500 with the following information and connected to the internet straight away without a problem: I have spent several hours simply trying to get this basic information into the Cisco 819 using CP Express without success, i.e. I get no internet. Rather than show my inputs, What is the correct setup. I am a novice so I'd rather solve this issue using CP Express just to get connected in the first instance. I have a static IP address, I connected the ethernet cable carrying the internet to the internet port of the E2500 and an ethernet cable from one of the ethernet ports of the E2500 to my PC. For the 819, I connected the internet cable to the GE WAN 0 port and the PC to one of the FE ports.
View 18 Replies
View Related
Feb 2, 2011
Does the autonomous Cisco WAP4410N Wireless-N Access Point could be managed using Cisco Works WLSE Express.
View 1 Replies
View Related
Aug 5, 2012
I have one out of three Catalyst Express 520's I cannot connect to with Cisco Configuration Assistant or with a browser. I've used Wireshark to capture the problem, and it sends a TCP RST packet immediately upon any such connection attempt.
As these devices do not have a console port, how can I gain access to the device? We'd like to upgrade them but cannot pull the existing config.
Since these 520's don't support or are not configured for telnet/ssh and the only connection I can make is with a broswer and CCA, I'm wondering if there is a way to get the config into a text file as normally done.
View 4 Replies
View Related
Jan 19, 2013
Is it possible to disable SSH v1 in ACS express installed in ADE 1010?
View 2 Replies
View Related
Nov 30, 2012
I have a mac and an android connected to a wireless network and can not open outlook express on both at the same time. Is that just the way it is.
View 2 Replies
View Related
Sep 21, 2012
I received 3 emails on my laptop and haven't received another since. Why isn't my emails coming through on my laptop but coming through just fine on my desk computer?
View 2 Replies
View Related
Feb 2, 2013
Both my usb ports broke. is thr an express card for my machine? emachine e627
View 1 Replies
View Related
May 26, 2011
I cant get hp psc 2410 scanner to work on airport express.I have the printer set up wirelessly but no scanner
View 1 Replies
View Related
Jan 7, 2013
I want install a wireless card--dual band, N, -- in my Studio XPS 9000 desktop. I have a dual band router.My questions:
1. Are the expansion slots PCI or PCI Express?
2. What card is recommended?
View 1 Replies
View Related
Mar 13, 2011
I've got an older desktop that needs a dual band upgrade and would like to know if a PCIe adapter w/ external antennas for desktop wireless is better/faster than the USB variety? They cost about the same. The router is a dual band WNDR3700 v1.
I've heard salespeople at retailers say, for desktop, go w/ the USB as they offer better performance than PCIe adapters even w/ external antennas... Does anyone know if the extra noise within the desktop case kills whatever benefits that the extra power and external antennas that a PCIe card has over a USB adapter?
View 2 Replies
View Related
Jul 11, 2012
I am struggling with a CE520 and its smartports stuff.I have configured the following vlans :
1- data
100 - phones
I need to bring those vlans (both of them) to a Cisco 800 router. The port of the 800 router is already configured as trunk and accepts vlan 1 and 100.The cisco 800 has both vlan 1 and 100 configured with 2 ips on different subnets, and ip routing is enable (to route between two vlans). Also, no access lists are configured.I have configured one port in the switch as role "router" and connected to the router. The other ports are all configured as phone-desktop (phone vlan 100 desktop vlan 1).If I connect a phone and manually configure an ip (the phone gets automatically vlan 100), and try to ping the phone from the router, it doesnt respond. Alse vlan 100 is protocol down.I am guessing what s the right configuration as the link between the switch and the router should be a trunk link for 1 and 100 vlans, but it looks like is transporting only vlan 1.Also changing the port role to "other" when you can specify the native vlan and another vlan, the switch doesnt accept vlan 100 as additional vlan on that link.
View 2 Replies
View Related
Sep 30, 2009
We have inherited a Catalyst Express 500 (model WS-CE500-24PC) from a company we aquired, and are having issues configuring the switch.
The switch must have been configured previously, but we don't know its IP address. It is no longer on the network, so we can restart it as much as we need to.
We followed the factory reset process:
1) Disconnect the switch from the power supply
2) Reconnect the switch while holding the "SETUP" button
3) Release the "SETUP" button when the status LEDs all turn Amber
4) Wait for POST to complete
5) Connect one PC to the port whose LED starts flashing
However, the PC is never given an IP address, and when we open a web browser, anything we try to browse to gives us "Page cannot be displayed", rather than the setup page for the switch.
Are there any known issues or browser/OS incompatibilities with this model of switch? We're using Vista and Windows 7 with IE7, IE8 and Firefox 3.
View 9 Replies
View Related
Apr 21, 2008
Is there a way to prevent resetting catalyst config by pressing and holding in the MODE button after powerup? I had entered in a basic config into my switch including passwords, etc. and was checking out different uses of the MODE button including setting the switch into express mode and I somehow managed to wipe the config and send the switch back into a default state by holding the mode button in for too long.
I want to prevent this from happening once the switch it is in production.
Not sure if it matters, but this is the 24 S model using the LAN lite image..
View 3 Replies
View Related
Jun 2, 2013
I have configured my new 3850 using the command line and all works well. I logged into the web interface expecting to see device manager with a pretty image of the switch etc.
However I am presented with the Express Setup page and even if i fill in all of the details again and click submit then nothing happens and this is all I can get.
I have version 03.02.01SE software.
View 11 Replies
View Related
Mar 1, 2006
Does it have this switch some port mirroring capability (SPAN or other)?
View 2 Replies
View Related
