Cisco Switching/Routing :: Catalyst Express 500 Factory Reset

Sep 30, 2009

We have inherited a Catalyst Express 500 (model WS-CE500-24PC) from a company we aquired, and are having issues configuring the switch.
 
The switch must have been configured previously, but we don't know its IP address.  It is no longer on the network, so we can restart it as much as we need to.
 
We followed the factory reset process:
 
1)  Disconnect the switch from the power supply
2)  Reconnect the switch while holding the "SETUP" button
3)  Release the "SETUP" button when the status LEDs all turn Amber
4)  Wait for POST to complete
5)  Connect one PC to the port whose LED starts flashing
 
However, the PC is never given an IP address, and when we open a web browser, anything we try to browse to gives us "Page cannot be displayed", rather than the setup page for the switch.
 
Are there any known issues or browser/OS incompatibilities with this model of switch?  We're using Vista and Windows 7 with IE7, IE8 and Firefox 3.

View 9 Replies


ADVERTISEMENT

Cisco Switching/Routing :: Master Reset Catalyst Express 500 (WS-CE500-24TT V01)

Apr 10, 2013

I'm trying to do a Master reset on my Catalyst Express 500 (WS-CE500-24TT v01) and I'm having troubles with this. url...I do everything as it says, but when I plug the cable and I pull up the Web browser nothings appear, just the message that I don't have a Internet connection. The LED port on switch don't stop blinking as LED setup either. Is there another way to do the master reset?

View 0 Replies View Related

Cisco Switching/Routing :: Factory Reset Catalyst WS-C2960G-8TC-L Switch?

Feb 20, 2012

How do I do a factory reset on a Cisco Catalyst WS-C2960G-8TC-L switch?

View 2 Replies View Related

Cisco Switching/Routing :: Catalyst 3560 - Access Switch To Reset Password To Factory Defaults

Nov 5, 2012

Im trying to access the switch to reset the password to factory defaults (please see switch output Astrix has removed customer identifying information for security purposes.) Each time I reboot the switch and try and access the password recover mode this same output below starts and im still not able to access the recovery area of the switch
 
cisco WS-C3560G-48PS (PowerPC405) processor (revision F0) with 122880K/8184K bytes of memory.

Processor board ID FOC1133Y28Q
Last reset from power-on
1 Virtual Ethernet interface
52 Gigabit Ethernet interfaces
The password-recovery mechanism is enabled.

[code]....

View 1 Replies View Related

Cisco WAN :: Preventing Reset Into Express Mode On Catalyst 2960

Apr 21, 2008

Is there a way to prevent resetting catalyst config by pressing and holding in the MODE button after powerup? I had entered in a basic config into my switch including passwords, etc. and was checking out different uses of the MODE button including setting the switch into express mode and I somehow managed to wipe the config and send the switch back into a default state by holding the mode button in for too long.
 
I want to prevent this from happening once the switch it is in production.
 
Not sure if it matters, but this is the 24 S model using the LAN lite image..

View 3 Replies View Related

Cisco Switching/Routing :: Catalyst Express 520 Sends TCP RST

Aug 5, 2012

I have one out of three Catalyst Express 520's I cannot connect to with Cisco Configuration Assistant or with a browser. I've used Wireshark to capture the problem, and it sends a TCP RST packet immediately upon any such connection attempt.
 
As these devices do not have a console port, how can I gain access to the device? We'd like to upgrade them but cannot pull the existing config.
 
Since these 520's don't support or are not configured for telnet/ssh and the only connection I can make is with a broswer and CCA, I'm wondering if there is a way to get the config into a text file as normally done.

View 4 Replies View Related

Cisco Switching/Routing :: Catalyst Express 520 - Trunk Configuration?

Jul 11, 2012

I am struggling with a CE520 and its smartports stuff.I have configured the following vlans :
 
1- data
100 - phones
 
I need to bring those vlans (both of them) to a Cisco 800 router. The port of the 800 router is already configured as trunk and accepts vlan 1 and 100.The cisco 800 has both vlan 1 and 100 configured with 2 ips on different subnets, and ip routing is enable (to route between two vlans). Also, no access lists are configured.I have configured one port in the switch as role "router" and connected to the router. The other ports are all configured as phone-desktop (phone vlan 100 desktop vlan 1).If I connect a phone and manually configure an ip (the phone gets automatically vlan 100), and try to ping the phone from the router, it doesnt respond. Alse vlan 100 is protocol down.I am guessing what s the right configuration as the link between the switch and the router should be a trunk link for 1 and 100 vlans, but it looks like is transporting only vlan 1.Also changing the port role to "other" when you can specify the native vlan and another vlan, the switch doesnt accept vlan 100 as additional vlan on that link.

View 2 Replies View Related

Cisco Switching/Routing :: Configuration Of Catalyst Express 500 Series?

Dec 25, 2012

I was trying to configure my Catalyst Express 500 switch (PID VID: WS-CE500-24LC V01)  and i followed the step i found in a document on Cisco website but still it showed an error "Page not found" and address displayed on bar was"169.254.0.1/catalyst-express.htm).

View 1 Replies View Related

Cisco Switching/Routing :: Catalyst 3570 Express Setup Webpage Not Go Away

Oct 21, 2009

i've got a stack of 3750's configured, everything is working fine, but the web interface for the stack will only present the web based express configuration page.  I can't get it to go away.  what needs to be done to clear whatever flag or register that causes this behavior.  the cli is fine, it's not trying to force epxress setup there, only in the web interface.  will reloading the software image fix this?

View 16 Replies View Related

Cisco Switching/Routing :: Can't Factory Reset CE500

Nov 27, 2011

I am trying to factory reset CE500 switch, as described in the factory rest section of the documentation. I do not get an IP address via DHCP from the switch.
 
On boot up I hold the setup button down, wait till the lights go solid amber release setup. wait for a port on the switch to start blinking green port 1 starts blinking green, plug my pc into port and wait for IP..and keep waiting !!!!
 
I have tried this on 3 switches now all with the same result.... NO IP offered.

View 1 Replies View Related

Cisco Switching/Routing :: 871 Factory Reset Without Password?

Jan 24, 2012

I recently decomissioned an 871 from a small business site and the owner did not want the device anymore. So now I'm trying to use it back at the office in the sandbox, however I don't know the password to the device and neither does the business owner.  There's a reset button on the back, but from what I've read (here), it only loads a different config file found on the internal flash. Tried this, no dice. Is this essentially a bricked router now or is there anything else I can do to clear the config and repurpose it for my use?

View 7 Replies View Related

Cisco Switching/Routing :: Reset 800 Back To Factory Defaults?

Jan 16, 2012

I have a cisco 800 that needs to be reset back to factory defaults. I tried typing in "config factory-default 10.10.10.1 255.255.255.0" at the conf t prompt, but I got an error Invaild input detected at ^ (the ^ is just under the word factory). So after a bit of reserch I came across this command "write erase" that seemed to do something but now I can't get any ip addreses. Here is the running config:
 
Using 1104 out of 131072 bytes
!
version 12.4
service config

[Code].....

View 13 Replies View Related

Cisco Switching/Routing :: 4507 R-E With Sup 10GE Factory Reset

Jul 29, 2012

I have been trying to reset my Cisco 4507 R-E with sup 10GE engines, and I am not having any luck. I have followed the following document:
 
[URL]
 
I have tried "wr erase" and "erase startup-config." I cannot delete the vlan.dat file either. I am using the command "erase cat4000_flash:vlan.dat" and its not working either. I have done these commands several times with no success. When asked if I want to save the config changes, I am answering with a "no" I have not tried to depress the small "reset" button on the front of the sup engines as I read that this just restarts the switch.

View 2 Replies View Related

Cisco Switching/Routing :: Reset 2911 ISR To Factory Defaults

Feb 7, 2012

I reset my Cisco 2911 ISR to the factory defaults.  I then used the configuration guide to do the initial set-up through the CLI.  I was able to assign IPs to the GE0/0 and GE0/1 ports.  Now I cannot access the GUI device manager at all.  I was able to ping the IP of GE0/0 so I know the adapter took the IP assignment, but still no GUI access.

View 7 Replies View Related

Cisco Switching/Routing :: How To Reset 2960 To Factory Default

May 31, 2012

I have a cisco 2960 that I seemed to have lost the password. Its just a test switch. I would like to know how to reset it to factory default. I have managed to get to a switch: prompt by holding in the small mode button on the front of the switch and pluging in the power but lost from here.

View 1 Replies View Related

Cisco Switching/Routing :: Force Gigabit Ethernet Port To Be 1000 Full Duplex In Catalyst Express 500 Series?

Sep 1, 2007

Can we force the Gigabit Ethernet port to be 1000 full duplex in Cisco Catalyst Express 500 series?

View 3 Replies View Related

Cisco Switching/Routing :: Catalyst 2950 Failed Password Reset?

Jun 7, 2012

I am not able to successfully accomplish the password reset function. This 2950 does not respond to the mode button held down at power up or to sending a briak. I have tried both several times and the switch continues to fully boot. [URL]    
 
C2950 Boot Loader (C2950-HBOOT-M) Version 12.1(11r)EA1, RELEASE SOFTWARE (fc1)Compiled Mon 22-Jul-02 17:18 by antoninoWS-C2950G-48-EI starting...Base ethernet MAC Address: 00:0b:fd:a1:4f:80Xmodem file system is available.Initializing

[Code].....

View 2 Replies View Related

Cisco Switching/Routing :: Catalyst 3500XL Switch - How To Reset Without Password

Feb 23, 2012

have a Switch I bought off a guy at work. Just to get into the Switching world of Cisco. He doesnt know the password on it and i cant reset the switch. I would like to mess around with it more but it doesnt load the flash or helper. It just sits there and holds. I have tried the password recovery and everything. Trust me, everything is correct, but it wont work for me. I cant load a new image to it because I dont have access to a server to get it from.
 
Base ethernet MAC Address: 00:0a:8a:94:58:c0Xmodem file system is available.

The system has been interrupted prior to initializing theflash filesystem.  The following commands will initializethe flash filesystem, and finish loading the operatingsystem software:

flash_init    load_helper    boot
switch: flash_initInitializing Flash...flashfs[0]: 3 files, 1 directoriesflashfs[0]: 0 orphaned files, 0 orphaned directoriesflashfs[0]: Total bytes: 3612672flashfs[0]: Bytes used: 1815040flashfs[0]: Bytes available: 1797632flashfs[0]: flashfs fsck took 3 seconds....done Initializing Flash.Boot Sector Filesystem (bs:) installed, fsid: 3Parameter Block Filesystem (pb:) installed, fsid: 4û

View 2 Replies View Related

Cisco LAN :: Catalyst 500 Express Switch / Discover Tool?

Jun 18, 2012

is there a discover tool for such a switch, i forgot the assigned ip .

View 2 Replies View Related

Cisco Infrastructure :: Catalyst Express 500 Port Mirroring Capabilities?

Mar 1, 2006

Does it have this switch some port mirroring capability (SPAN or other)?

View 2 Replies View Related

Cisco Switching/Routing :: WS-C2950-24 - What Last Reset From System-reset Means

Dec 10, 2012

Does any know what " Last reset from system-reset " means? Is this becouse of a power failure or someone reloading the switch?

View 3 Replies View Related

Cisco Firewall :: How To Do Factory Reset ASA-SSM-10

Feb 25, 2013

I forgot the user for management a IPS SSM-10, when i follow the procedure to reset the password for cisco user, i can get into the module, i change the password and every thing is OK, but when i tried to configure y don´t have rights to do anything.
 
if i see the privileges for the user cisco this is the result. [code]

View 4 Replies View Related

Cisco WAN :: IAD 2430 Factory Reset

Aug 18, 2011

I've inherited a IAD2430 router but I don't have the ena passwords nor am I able to do a break and do a password recovery. I'm familiar with the password recovery process and config reg settings but this one has me stumped.

The config register is set to 0x2102 so I see nothing at all when it boots until it's completed and I get the prompt to "Press RETURN to get started!" I get to non priv mode but without the password obviously I'm going nowhere at that point. All the docs I've come across  so far assume you can break out of the boot process or are already in rommon. When I remove the flash: I get no output at all... The IAD has no "reset" button like the CAT switches either..
I don't need the current config, just a reset/format of the NVRAM.

View 2 Replies View Related

Cisco WAN :: 1800 - Factory Default Reset?

Sep 24, 2012

My team already bought one 1800 Series router. And they setted some passwor.
 
Right now i am not able to login. I know the cisco password recovery method to reset the password.
 
Instead of password recovery method i want to try with total factory default setting.
 
is there is any method to do factory default without login

View 5 Replies View Related

Cisco Firewall :: ASA5505 Factory Reset?

Feb 27, 2013

I got a ASA5505 back from a Office. I don`t know the IP Address to connect to the ASA. How can i reset the System to the Factory Settings.

View 1 Replies View Related

Cisco WAN :: AIR-AP521G-E-K9 / Reset To Factory Default In CLI

Jan 22, 2012

I have an AIR-AP521G-E-K9 and i want to reset to factory default in CLI.I tried "write erase" but dont work.I have problems with access-list and i want to desactivate access-list that i have created by web GUI.The problems now is that i can not access to my AP, no ping, no web GUI access.Access that i have is only by CLI, but access list is always blockinh all tha traffic trought my AP.How can i desactivate mac filtering, or how can i reset to factiry default

View 1 Replies View Related

Cisco WAN :: 877 Router Factory Reset Woes?

Sep 3, 2012

We've recently changed data line providers and now have some Cisco 877 routers we'd like to reconfigure and use at other sites. Although we own these, they were configured by our old data line providers, I'm having a hard time of resetting them to factory defaults. The simple, hold down the reset button until it restarts does not work.If I press the reset button within 5 seconds of power up to load the default rom image, I get the below:
 
System Bootstrap, Version 12.3(8r)YI4, RELEASE SOFTWARE
Technical Support: [URL]
Copyright (c) 2006 by cisco Systems, Inc.
 C870 series (Board ID: 1-148) platform with 131072 Kbytes of main memory
 Booting flash:c870-advipservicesk9-mz.124-24.T.bin
Error opening: flash:c870-advipservicesk9-mz.124-24.T.bin

[code]....

I assume from this the required bin has either been removed, renamed or overwritten.As soon as the router boots it requires a password and I dont have the password to be able ftp files in and out of it.

View 10 Replies View Related

Cisco AAA/Identity/Nac :: ACS 5.1 Reset To Factory Setting

Dec 10, 2012

i got the ACS 5.1 at work..after migrating the data from 4.1 a lot of data got changed into the 4.1 so I needed to reset my configuration (since i played around with the 5.1)after doing so, I can't access the web page, to start the configuration again tried the administrator-setup but it didn't work,

View 1 Replies View Related

Cisco Infrastructure :: How To Factory Reset 6160

May 29, 2012

I can't figure this out and there isn't much documentation on the subject online. The reset button just resets the device even after holding it for 10+ seconds and there is nothing in the CLI.

View 5 Replies View Related

Cisco WAN :: 1811 - Reset To Factory Defaults

Feb 28, 2012

I successfully pulled it out of the box and already broke it.

What I did to lose my connectivity to it (via IP, console is OK), but I'd like to start from scratch and during my learning/experimentation I will undoubtedly need to do this over and over until I get things right.
 
I've found various guides, none of which look like what I am after. Basically, I want to return this to the condition that it was in when it came out of the box. IOS is version 12.4(6)T11 .

View 2 Replies View Related

Cisco Switching/Routing :: 3850 - Web GUI Stuck In Express Setup?

Jun 2, 2013

I have configured my new 3850 using the command line and all works well. I logged into the web interface expecting to see device manager with a pretty image of the switch etc.
 
However I am presented with the Express Setup page and even if i fill in all of the details again and click submit then nothing happens and this is all I can get.
 
I have version 03.02.01SE software.

View 11 Replies View Related

Password Recovery Or Factory Reset On Cisco PIX-515e

Jul 4, 2011

I have a cisco PIX-515e which i have connected to a emulator through the console port, and im having trouble erasing data from it. I can get into 'pixfirewall' mode and 'monitor' mode but thats as far as i get. i have tried 'write erase' and 'configure factory-default' in both modes to no success.

View 11 Replies View Related

Cisco WAN :: How To Reset WS-C3560V2-48PS Back To Factory

Aug 30, 2011

I put a config on this switch and it is having some issues I would like to take it back to out of the box state however I am not sure how to do this ? I do not need to blow away the IOS just the config I put on it 
 
Cisco IOS Software, C3560 Software (C3560-IPBASEK9-M), Version 12.2(50)SE5, RELE
ASE SOFTWARE (fc1)
Technical Support: [URL]
Copyright (c) 1986-2010 by Cisco Systems, Inc.
Compiled Tue 28-Sep-10 13:21 by prod_rel_team
Image text-base: 0x01000000, data-base: 0x02900000

[code]....

View 1 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved