Cisco AAA/Identity/Nac :: ADE 1010 - Disable SSH Version1 In ACS Express 5.0?
Jan 19, 2013Is it possible to disable SSH v1 in ACS express installed in ADE 1010?
View 2 Replies
ADVERTISEMENT
Cisco AAA/Identity/Nac :: ACS Express 5.0.1 Joining Domain
Dec 18, 2011I have been having some issues with an ACS express joining a domain. This device previously had joined and after a weekend we received a notice that users were not authenticating to the domain. This in turn let us to find out the the device was unable to join the domain. Further research led us to find that the account the device was using to join the domain had been disabled. However, after re-enabling the account we would only recieve domain timeouts when tried to join. I opened a case with cisco and we have tried everything under the sun to no avail. I can ping the AD server (name & ip) from the ACS express. Cisco apply a root patch that allowed us to create hosts file entries on the device. I checked the system time and made sure it was within 5 minutes of the Domain controller time. In the logs of the ACS express the only thing I can really find is:
-"Checking remote join status: SMB connectivity failed"
-"Timeout reached in getting AD Diag info"
"acsxp/server Warning Server 0 is DisconnectedMode, IOException for reason, ipc socket connect; No such file or directory:
Recently we re-imaged the ACS and tried to join the domain without the old config on it and just received the same error. I reloaded the backup after that which also resulted in no change. I am starting to think that there is more of a domain issue rather than networking but am having issues finding a way to prove this via the logs. The are other ACS's configured in the network and the settings on this device match the settings on the other device in the network which are working correctly.
Linksys Wireless Router :: Get Firmware Download For Wrt54gx2 Version1?
Aug 6, 2011I have the original firmware, having some rebooting issues, I want to upgrade the firmware, but can't find anywhere to download it! my current firmware is 1.01.06?
View 6 Replies View RelatedFormatted Inspiron 1010 And Since Then F2 Does Not Function?
Feb 5, 2012Formatted my inspiron 1010 and since then F2 does not function. I have downloaded the enable/disable utility. Nothing happened. The system does not show any wireless network available. The icon shows that the wireless LAN and WAN/GPS are enabled.
View 1 Replies View RelatedCisco AAA/Identity/Nac :: Never Disable Account In ACS 5.x?
Feb 16, 2013I'm currently setting my ACS 5.x for oridinary person to disable account if password not changed for certain date, But some VIP accounts need to exclude from this condition?
View 3 Replies View RelatedCisco AAA/Identity/Nac :: Disable Telnet To ACS Appliance 4.2 1113 SE?
Aug 12, 2010How do we disable the telnet to ACS appliance 4.2 1113 SE
View 4 Replies View RelatedCisco AAA/Identity/Nac :: ACS 4.0 - Disable NAC From 802.1x Wired Access Authentication?
Jul 8, 2011I would like to disable NAC policy control from my ACS 4.0.I would like only 802.1x AAA on my switch ports.Also I'd like to assign a different VLAN to different MAB devices by RADIUS user attribute, in order to differentiate vlan for printers, clocks and so on. Any document for ACS 4.0?
View 1 Replies View RelatedCisco Switching/Routing :: Location Of Nexus 1010 Serial Number?
Jun 5, 2013Where on the case is the serial number located? I have a dead one that needs RMA.
View 1 Replies View RelatedAAA/Identity/Nac :: ACS 5.2 - Disable Logging Of Testing User?
Apr 30, 2013I am looking for the way how to disagle logging of one user. We are using one testing user for checking accesibility of ACS from large number of switches - this checking exhausting logs quite quickly. Is it possible to disable logging of such user?
View 2 Replies View RelatedDell :: Inspiron Mini 1010 - Internet IP Ping Failed
Oct 20, 2012I have a dell inspiron mini 1010 with 1397 wifi card. I am trying to connect to internet through wifi but comp. wont connect. when i run diagnostic it says internet ip ping faild. my router( witch is an arris xfinity) is working fine with two other computers. strangly it connects with my netgear router just fine.
View 1 Replies View RelatedCisco AAA/Identity/Nac :: How To Disable / Remove Unwanted Language Templates In ISE 1.1.1
Apr 23, 2013We're using ISE's Sponsor/Guest Portal function.We customized the english default lanuage template.But we do not want to translate/customize all default language templates.How can I disable/remove the unwanted templates? (The delete button is disabled for them)Otherwise our users would be able to select templates that are not customized.
View 7 Replies View RelatedCisco :: Does ACS Express Have Same GUI Interface
Jun 13, 2012Does the ACS Express have the same GUI interface that the full ACS appliance? I mean if I know one I know the other?
View 4 Replies View RelatedCisco :: 881 CP Express Will Not Load In Browser
Nov 26, 2012I have acquired a Cisco 881 router and have installed CCP express onto it. The router is set to factory default and I am using IE9, Java is also installed.i try to log in using the default IP of 10.10.10.1 through the browser and the log in box pops up, I type the default "cisco - cisco" to log in, the box disappears but then nothing, just a blank browser page, CCP express refuses to boot up.PC's firewall and security programs are turned off.Pop up blockers are deactivated in browser.Flash is installed.I've tried downgrading my version of Java to various versions and doing a hard reset but still no luck.I've tried CCP Express versions 2.6 & 2.7.I have tried from 2 different PCs.I have also tried from Firefox with the same result.I am able to access the router from console and CCP full version.
View 10 Replies View RelatedDowngrade Cisco Unity Express?
Nov 13, 2011I managed to get an AIM-CUE for my 2801 router. I upgraded from version 3 to version 7.1.5. then realised I can't licence it without buying mailbox licences from Cisco (working on a budget for a lab) I tired to downgrade but I get the error
View 1 Replies View RelatedCisco WAN ::877w SDM Express Does Not Work
Nov 7, 2011I had the Cisco 877W Router working in my old company. The old company was closed and I bring all of network equirments to new company.I am trying to setup this router to new company but lost menu, console cable and software CD.
View 2 Replies View RelatedCisco Security :: Will ACS Express Ever Support 2008 R2
Apr 19, 2011My company has started the migration from Windows 2003 to 2008 R2. Will my ACS Express boxes (currently running 5.0.1) ever have an upgrade option to work with 2008 R2? Do I need to trash the ACS Express appliances for some other solution?
View 3 Replies View RelatedCisco WAN :: Where To Type In Gateway Address In 891 Using CCP Express
Jul 6, 2011We are switching over to a new ISP and the settings from the old ISP Statstic IP,DNS, is on the Cisco 891 router. Question can I just edit the settings that are already on the Cisco 891 router. I clicked on the CCP exress Went to the Task Internet(Wan) Address type is set for Static IP which I can change and the subnet I can change. In the DHCP it is enable DHCP server on the Lan interface VLan1 and I want to keep the Starting IP address and Ending IP address. For the Section DOmain Name Server (DNS) Primary DNS and Secondary DNS I can change it. Where do I type in the Gateway address. I clicked on the Routing and I only see checked Enable dfault Route and checked INterface Fastethernet8. I don't anywhere that I need to type in the Gateway address anywhere in the CCP Express.
View 3 Replies View RelatedCisco WAN :: 1921 CP Express Application Could Not Be Launched
Dec 17, 2012I have a new 1921 router and when I try to use CP Express I get a Microsoft Internet Explorer error. Cisco CP Express Application could not be launced. If CP Epress is launched using https try the following steps and relaunch CP Express.
Disable TLS option in JRE Settings[Java Control Panel->Advanced ->Security]I have done this and still get the same error. I initially used the console port and assigned a user name and password per the warning message.
I normally use command line entries to setup my routers but this is first new router I have gotten in some time and am not familliar with the CP Express and thougt I would try it. Is there a way to load a default program that does not have all the CP Express data in it without manually removing it?
PCI Express 2.0 Gigabit Ethernet Card?
Sep 24, 2011Is there a PCI Express 2.0 Gigabit ethernet card [NIC] which i can install in this motherboard where usually one installs NVIDIA graphic cards?
View 4 Replies View RelatedPci Express Network Card Can't Be Read?
May 22, 2012I have a motherboard intel DG41RQ and it has a built in lan card but i wanted to put another lan card via the PCI express slot and i put it and the flash lights on the network card are flashing but still the hardware manager and everything on the computer haven't even noticed that i put a new hardware.
View 36 Replies View RelatedCisco :: WLSE Express 1030 Boot Error?
Feb 13, 2011I have a WLSE Express 1030 which is not booting. The error is "GRUB loading, please wait... Error 17". The error is a mount error for the partition. I don't have a recovery disk and I am not authorised to download the disk.
View 1 Replies View RelatedCisco LAN :: Catalyst 500 Express Switch / Discover Tool?
Jun 18, 2012is there a discover tool for such a switch, i forgot the assigned ip .
View 2 Replies View RelatedCisco WAN :: 1941 Router - CP Express Not Working After Upgrade
Aug 13, 2011I am trying to upgrade CP Express to 2.5 and after the upgrade I bring up the webpage to login and I am prompted for my credentials, I enter them and I am authenticated. However the CP Express home page never loads. I have tried to reload 2.0 but it does the same thing.
View 3 Replies View RelatedCisco WAN :: Linksys E2500 - Basic Configuration Of 819 Using CP Express
Aug 12, 2012I set up a basic Linksys E2500 with the following information and connected to the internet straight away without a problem: I have spent several hours simply trying to get this basic information into the Cisco 819 using CP Express without success, i.e. I get no internet. Rather than show my inputs, What is the correct setup. I am a novice so I'd rather solve this issue using CP Express just to get connected in the first instance. I have a static IP address, I connected the ethernet cable carrying the internet to the internet port of the E2500 and an ethernet cable from one of the ethernet ports of the E2500 to my PC. For the 819, I connected the internet cable to the GE WAN 0 port and the PC to one of the FE ports.
View 18 Replies View RelatedCisco Wireless :: WAP4410N - Managed By WLSE Express?
Feb 2, 2011Does the autonomous Cisco WAP4410N Wireless-N Access Point could be managed using Cisco Works WLSE Express.
View 1 Replies View RelatedCisco Switching/Routing :: Catalyst Express 520 Sends TCP RST
Aug 5, 2012I have one out of three Catalyst Express 520's I cannot connect to with Cisco Configuration Assistant or with a browser. I've used Wireshark to capture the problem, and it sends a TCP RST packet immediately upon any such connection attempt.
As these devices do not have a console port, how can I gain access to the device? We'd like to upgrade them but cannot pull the existing config.
Since these 520's don't support or are not configured for telnet/ssh and the only connection I can make is with a broswer and CCA, I'm wondering if there is a way to get the config into a text file as normally done.
Wireless :: Outlook Express On Two Platforms At The Same Time?
Nov 30, 2012I have a mac and an android connected to a wireless network and can not open outlook express on both at the same time. Is that just the way it is.
View 2 Replies View RelatedOutlook Express No Email On Laptop Wireless?
Sep 21, 2012I received 3 emails on my laptop and haven't received another since. Why isn't my emails coming through on my laptop but coming through just fine on my desk computer?
View 2 Replies View RelatedMake An Express Card For Emachine E627?
Feb 2, 2013Both my usb ports broke. is thr an express card for my machine? emachine e627
View 1 Replies View RelatedCan't Get Hp Psc 2410 Scanner To Work On Airport Express
May 26, 2011I cant get hp psc 2410 scanner to work on airport express.I have the printer set up wirelessly but no scanner
View 1 Replies View RelatedDell :: XPS 9000 Are Expansion Slots PCI Or PCI Express
Jan 7, 2013I want install a wireless card--dual band, N, -- in my Studio XPS 9000 desktop. I have a dual band router.My questions:
1. Are the expansion slots PCI or PCI Express?
2. What card is recommended?
WNDR3700 USB Vs Mini-PCI Express Wireless Networking
Mar 13, 2011I've got an older desktop that needs a dual band upgrade and would like to know if a PCIe adapter w/ external antennas for desktop wireless is better/faster than the USB variety? They cost about the same. The router is a dual band WNDR3700 v1.
I've heard salespeople at retailers say, for desktop, go w/ the USB as they offer better performance than PCIe adapters even w/ external antennas... Does anyone know if the extra noise within the desktop case kills whatever benefits that the extra power and external antennas that a PCIe card has over a USB adapter?
Cisco Switching/Routing :: Catalyst Express 520 - Trunk Configuration?
Jul 11, 2012I am struggling with a CE520 and its smartports stuff.I have configured the following vlans :
1- data
100 - phones
I need to bring those vlans (both of them) to a Cisco 800 router. The port of the 800 router is already configured as trunk and accepts vlan 1 and 100.The cisco 800 has both vlan 1 and 100 configured with 2 ips on different subnets, and ip routing is enable (to route between two vlans). Also, no access lists are configured.I have configured one port in the switch as role "router" and connected to the router. The other ports are all configured as phone-desktop (phone vlan 100 desktop vlan 1).If I connect a phone and manually configure an ip (the phone gets automatically vlan 100), and try to ping the phone from the router, it doesnt respond. Alse vlan 100 is protocol down.I am guessing what s the right configuration as the link between the switch and the router should be a trunk link for 1 and 100 vlans, but it looks like is transporting only vlan 1.Also changing the port role to "other" when you can specify the native vlan and another vlan, the switch doesnt accept vlan 100 as additional vlan on that link.