Cd/rw drawer was bumped and now is most likely off track. Closed now, but now computer is not functioning correctly and will not connect to the internet for some strange reason..have unplugged and disconnected and reconnected all, to no avail. This is an older tower and belongs to a neighbor.
View 2 RepliesMy upload is very high but I dont use any P2P programs. Can I track what is being uploaded?
View 2 Replies View RelatedSuddenly the video function on my computer stopped working. I've restored my system to the way it was prior to this loss, but it didn't resolve the problem.
View 2 Replies View RelatedI work as an administrator for a small business (~30pc and a Windows 2003 R2 server ).Recently, we started to have problem with our lan, the network start to kinda lock-up randomly. For example, browsing folders is fine then you switch to one and the explorer window just do nothing (with a loading cursor) and after 4 second everything refresh and work again, then in word or any other program (sometime not even related to network files/folder) you press the save button and it do the same, do nothing for 4-5 seconds then refresh and work again.I'm positive that no process on the server take up enough CPU time to do that, it's not a per-pc problem since everybody is affected when the problem start and when I reboot the server it work like a charm for another day then the problem may restart the next day.Nothing show up in the event viewer of both PCs and the server and we can't find a correlation between the problem and high CPU/LAN usage on the server (at worse CPU is used at 10% and LAN at 2%).Our RAID controller and our SAS HDs are working flawlessly, we're in the process to change our infrastructure anyway but since I can refer to people that may know their stuff way more than myself I though Id ask here.We first though that our switches may be in cause but then why rebooting the server would be correcting the problem ?
View 7 Replies View Relatedon our cisco 3845 router we have recently applied a qos policy on a fast ethernet where our MPLS link is connected. We have already having a GRE tunnel over the fast Ethernet with one of our site. Now we are observe the application working slow over the GRE tunnel. When we have removed the qos policy from the MPLS link the application are working fine.My question is why it is happning on the gre tunnel. So how to overcome the problem. Shall we need to apply the qos policy on the GRE tunnel alos ?
View 1 Replies View Relatedwin 2003 dhcp server. when I leave dhcp services OFF i can ping the server fine. once i turn ON dhcp services the connecting drops in and out.. what is going on here?
My users are unable to get a steady connection to the dhcp server.
If I could swap around the bootvar on my 5505 without affecting the activation key.this is to learn different NAT on pre and 8.3+ IOS.
# sh bootvar
BOOT variable = disk0:/asa825-26-k8.bin
Current BOOT variable = disk0:/asa825-26-k8.bin
CONFIG_FILE variable =
Current CONFIG_FILE variable =
[code].....
We have an ASA 5505 and I want to block www.facebook.com for all users on the inside network. I followed the instructions laid out in Cisco support document ID 100513 using regular expressions with MPF but am running into some problems.
[URL]
Once the configuration has been changed based on these instruction www.facebook.com is blocked. However I can't access any other websites except my Google News home page comes up just fine for some reason.
ASA Version 7.2(3)
!
hostname ciscoasa
domain-name default.domain.invalid
enable password 4nJloDG8uYd8w4D3 encrypted
names
!
interface Vlan1
[code]....
Im looking for some software to monitor general info on the computers in the office. I would like to be able to service a computer and be able to pull up service notes, info on hardware and just be able to keep track of what we have been doing to all of the computers
[code]...
Actually i want to trap the e-mail sender's mac address using his ip from header of e-mail ID... isn't that possible...??
View 1 Replies View RelatedWe've recently upgraded our switches from 10/100 over to FOUR Dell 2848 (GB Managed switches) and using one as a director (fiber uplink).We are all on GB networks now and we've been running into issues tracking down what's hogging up most of our bandwidth (local area network) throughout our company.We need to track down which machines are copying data to servers and vise versa.
View 1 Replies View RelatedMy home network has two routers. My setup is...modem to router 1, then router 1 to router 2. is there a way to track the bandwidth usage on the two routers. My ISP says that I'm going over my bandwidth allowance and that's because in my household, we are hardcore gamers, netflix, and internet users. Router 2 belongs to my sister-in-law, and router 1 is mine. But I want to know which and more importantly, "WHO" is using more of the bandwidth.
View 3 Replies View Relatedhow to track webhistory of a particular system using its ip address...can i remotely monitor the systems webhistory using its ip address.
View 5 Replies View RelatedIs there a chance of tracking a laptop using Their MAC or IP Addresses?
View 6 Replies View Relatedif there's any way to track the time or date when my modem was used. I have a TP Link modem/router.
View 1 Replies View RelatedMy ISP limits me and my family to download/upload 40GBs of data each month. Recently, (since my brother has moved back in), the amount downloaded each moth has rocketed to around 60GBs, meaning we've gone over the limit. We've asked my brother to stop downloading things, and he says he has, but its obvious he hasn't. I searched google and I haven't found anything, but I was wondering if there was a piece of software to track exactly what's being downloaded/uploaded through the main router. Or a program to more simply which IP address is downloading the most...
View 8 Replies View RelatedI've been looking around for a way to track my usage on my D-Link router. Any posts to address this seem to be a few years old. At that time, there was nothing I could do to track it via the 825. Any 3rd party firmware or anything from DLink that I can use?
View 5 Replies View RelatedTrying to implement PBR in N7K? I found that there is not track mechanism can use in "set next-hop ip", so if the next-hop is unreachable that the route might be died.
View 0 Replies View RelatedI was just brushing up few things in GNS3 and after setting up an SLA.Now when I want to set the track ip I get not option for sla why??I am running c3725-adventerprisek9-mz.124-15.T5 shouldn't it be available?
View 2 Replies View Relatedi installed the Cisco Prime LMS widget and see there is a choice to search by username and hostname and phonenumber (for IP phones?) how can this be set up?
View 1 Replies View Relatedhow can I track a dynamic IP address. The reason why I am asking is because my dad lives about 40miles from me and I would like to logon to his computer from my apt and my dad is currently using frontier dsl connection with a westell 6100 modem. Is there any software or what do I need to do to configure this?
View 6 Replies View Relatedi have a 881G and an IP SLA icmp configured. (ip sla 1). I can get the status of it by the OID:
1.3.6.1.4.1.9.9.42.1.2.10.1.1.1
But, on the same router i have a track 1 for the SLA 1 and a track 2 monitoring track 1 with threshold . What i want, is to get the OID of track 2 so i can get the status of it. Which OID is that?
How to track all the MAC address of all the modems connected to a network .
View 2 Replies View RelatedI'm no network security expert but have been asked to "investigate" someone who has been connecting their personal laptop to the company network and using our internet to do "questionable" activities.
Basically I have this information taken from our domain controller's logs:
- DHCP address that was leased to the laptop at the time of the "infractions".
- Computer name of the laptop.
- Precise date and time of when this person was connected to our network.
Based on the DCHP address, I can somewhat narrow it down to a few different switches at different locations in the building, but there's no way to pinpoint it exactly. If I can figure out which switch they connected to, I would know who did it.
I have an 877 router which has a DSL WAN interface. The DSL service at this site is unreliable, so the company have purchased a separate 3G router to be used as a backup. This device maintains 3G connectivity at all times and has a static IP on the internal subnet (for arguments sake let's say 10.0.0.253).
What I want to do with the Cisco router is to track the DSL interface and if it is up, install a default route pointing to it. If it is down, I want the default route to be the 3G router.
I am thinking the best way to do this is to set up a track and then set 2 default routes; one which is installed if the tracking is up, the other has a higher admin distance and points to the 3G router and thus should only be used if the track is down. For example:
track 10 interface Dialer0 ip routing
delay down 30 up 30
ip route 0.0.0.0 0.0.0.0 Dialer0 track 10
ip route 0.0.0.0 0.0.0.0 10.0.0.253 100
Is this likely to work or is there a better way to do it?
We got a 3310MSE that does not track clients.,rogues etc for some reason.
- there are no firewalls between PNCS and MSE
- clocks are synced up with NTP
- CAS is running on the MSE
- I have added controllers and a test site with clients and is synced up with the MSE.
- Have enabled tracking under tracking doe clients and rogues excluding adhoc rogue APs -we only have 100 element license.
The only other thing worth mentioning is that MSE is running version 6 firmware and the controllers are 7.0.220 but I do not think this should prevent MSE from tracking devices. [code]
I have a webcam set up on my website that feeds from my router here.
Is there a way to track who checks in and for how long? I have a few folks that have decided to park their butts on the cameras all day long, I want to block them.
I set up a port forward, I think I have everything set up correctly. The cam works fine, just can't seem to find the log where they came from
I set up an "access control" rule in my DIR-635 and so I have all navigation log from a PC of my LAN. But the URL in log are often truncated.There's a way to obtain a full track for an user navigation?
View 3 Replies View RelatedI'm trying to check what quantity of data is going through the router. I can see there is a monitor that tells you in real time the output for the last few minutes, but I want to keep track of monthly usage so I know whether I'm nearing my download limit set by my ISP. Is this possible with the Play N600??
View 1 Replies View RelatedI am doing support for a library that has 2 WAP2000 devices that have no security. These are for the patrons to connect to the internet at the library. They want to track how many people are connecting to the internet. Can I log how many computers connect to these access points or get another WAP that will track how many computers connect to the internet?
View 1 Replies View RelatedI have two Cisco Routers 3800 series for my internet traffic (2 ISP). I configure HSRP on the interfaces gigabitethernet and at the main router I put the multilink interface to track. When the connection drops to the main router traffic does not switch on my second router.
View 1 Replies View Relatedhow to track user logins with this device? I've pointed it to a SYSLOG, but it only creates Virtual Access connections, and I don't know who that connection belongs to.
View 3 Replies View RelatedWe have a need to track specifc subnets on our two 6509s, running IOS version 12.2(18)SXF16. Basically, we want to do this:
track 1 192.168.0.0 255.255.255.252 reachability
track 2 192.168.1.0 255.255.255.252 reachability
However, the 6509 IOS only provides the option to track an interface. Is this a feature that's available in later IOS versions?
Is there another way to track these routes? The subnets are used for WAN links at a HQ and DR site and we are doing a specific PBR (sending all http/https traffic) using these subnets. If that WAN link goes down, we want to be able to utilize a backup WAN link to support that traffic.