Can't Access Web Interface For Brother Mfc-665cw
Jun 8, 2011
I have a brother mfc-665cw connected wired to my netgear router.
I assigned a static ip address to the printer From a desktop (windows 7 ultimate) I can ping the printer and I can print as well ,,,means desktop can talk to the printer.
But whenever I typed in the right ip address for the printer in 3 different browsers (error message: page could not be displayed!!!!)
I disabled the firewall and Antivirus (Micro Trend) same problem persisted .
View 3 Replies
ADVERTISEMENT
Feb 20, 2011
I go through the printer installation for my Brother 665CW. During the install, the printer shows up. In my router's client table, I see the printer. When I print a network setup page, the IPs and MACs match what's on the router. Everything should work. The status icon for the printer on both my computers (one wired to the the router, one wireless) is grey. (green=connected, ready to print; red=error;grey=not connected) If I send something to the printer, of course nothing prints. It times out on my computer. The weird part is that sometimes, after several hours, even days, my docs will suddenly print. What the heck? I read on some forums that the WLAN partition can get in the way but it's not turned on so that can't be the problem. Except for security, most everything is on the default setting. I'm not using WPS. The security I'm using is compatible with the printer (like I said, it connected to the router and the router sees the printer. It's like the computers are ignoring the printer. Both computers are running Windows 7. I've tried both the win7 and vista drivers, thinking it was a driver problem. Two months ago, when I switched from my ATT modem/router everything was working perfectly. I tried to emulate as many setting from that as I could. What magic check box am I forgetting to click?
View 1 Replies
View Related
Aug 25, 2011
The Brother MFC-7840W is connected to the local network by ethernet. My XP computer sees it and I can print to it without any trouble.
When I add the DIR-601 to the XP, I can longer print. The network address for the printer is 192.168.1.192 which has a different subnet.
View 1 Replies
View Related
Jan 29, 2012
I have a Brother MFC9120CN that I would like to connect to my wireless network. The printer does not support wireless networking but does support networking with Ethernet cables.I want to connect it wirelessly using a wireless adapter on the USB port.I'm not sure how to set up the networking on the printer to do this. schmuck281 has chosen the best answer to his/her question.Click here to view the answer that was selected.
View 2 Replies
View Related
Dec 16, 2011
I can't get my Brother MFC-J410w hooked up to my Dell Computer. I am running Windows 7. I ourchased this printer 8/2/2011 and have yet to print.
View 2 Replies
View Related
Jun 28, 2012
I want to do wireless printing and wonder whether, in stead of buying a new printer, I can do something to convert my Brother DCP 7020 for wireless use.
View 2 Replies
View Related
Jul 29, 2012
I've got a Brother 5490CN network printer. For the past year, it has been sitting next to my router and plugged directly in. Due to changes in how my service enters my home, the router needed to move to another location - a location that is inappropriate for the printer.
View 4 Replies
View Related
Mar 12, 2013
My father works at a mall in a shop and had bought a Brother 2270DW printer (wireless and wired networking) to find that it was a bit bigger than he had anticipated it to be and does not fit on his kiosk desk, and so gave the printer to me yesterday. He was wondering if it is possible to setup the printer so that it could be printed to from over the internet. After I reserved a DHCP IP address for the printer, changed 'admin' and 'user' passwords, and disabled some protocols, I made sure IPP was enabled and that port 631 (TCP) was forwarded on my DD-WRT router.
I added the printer as my external IP address [URL] in Windows, selected the correct driver as provided by Windows Updates, and attempted to send a test page without success.This would be my first time trying to setup a printer for over-the-Internet printing (aka IPP).what I could do to try get this to work?
View 6 Replies
View Related
Aug 15, 2012
I am using a Compaq laptop, and i have Microsoft Virtual WiFi Miniport Adapter attached to it.I used to be able to connect to a Printer Brother MFC-J430W via wireless and print from it.But recently, when I try to print from it, it says that the printer is offline. I tried restarting my laptop, wireless adapter, and the printer, I also try restarting the spooler service but the attempt was not successful. Try unchecking SNMP and the printer is online but I can't print from it. So, I decided to uninstall the printer and reinstall it again. This is where another problem occurs. When I try reinstalling it, my laptop seems to be unable to find the printer (I have entered the IP address of my Printer but the printer still can't be found). Oh, and by the way, other laptop seems to be able to print a document from that printer.
View 3 Replies
View Related
May 31, 2012
So I have a Brother MFC-8660DN connected to my LAN via Ethernet cable, however I now want to move the printer to another room, but don't want to run the ethernet cable to it's new location. There are a ton of linksys wrt54g routers for cheep and I wondered if I could just move the printer and plug into a wrt54g router to connect to my LAN via a wifi signal rather than directly via ethernet cable. It seems like it should work, however because the wrt54g isn't hooked to a computer I'm not sure that this would work.
View 2 Replies
View Related
Feb 10, 2013
Why cant my brother printer mfc-990cw see the SSID on my Linksys EA6500 router?
View 1 Replies
View Related
Mar 11, 2011
Connected our Brother MFC-8820D printer/scanner/fax directly to one of the 4 Ethernet ports on the back of the DIR-655 in our new install with this router, and all computers can print to it, whether connected via an Ethernet cable or via wireless, but none of the printers can scan. We just get an error message. Scanner driver is installed on all computers. Same printer worked fine via Ethernet on a Windows small business server for printing and scanning. Windows server no longer used or connected. Only DIR-655 as we are dumbing down and getting rid of our Windows server and have gone to a NAS solution connected to the DIR-655.
What can we do to make the scanning work on our Multifunction printer?
View 12 Replies
View Related
Jun 3, 2011
How to connect a Brother wireless printer to the Belkin Surf N300 wireless router? i tried a few times and it wont connect.
View 1 Replies
View Related
Apr 2, 2013
I have had the E4200 for a while with a Brother MFC-J615W printer. I have been having problems keeping the connection between my laptop(HP) and the printer ever since I switched to this router. The only thing that works is completely reinstalling the driver, and then it is touchy when searching the network for the printer. The port and IP address for my printer match, and when I tried pinging my printer, I do not have any success. My laptop registers the printer as offline, as does the router when I go into the devices on the router(via mylocalrouter). To spot check the issue, I have switched the router back to my old one(Belkin) and the printer works flawlessly. I have always been able to connect the printer to the network without any problems, but my laptop and router dont recognize it.
View 1 Replies
View Related
Apr 8, 2013
I have a Brother HL-2270DW wireless printer. The install seems to go OK , and the printer gets an IP (DHCP) address from the router. But the installation software cannot find the printer to complete the installation. The printer settings (printed after pressing GO button three times) show that the printer has an address, but it will not respond to a ping.
View 5 Replies
View Related
Jul 30, 2012
My switch is a HP 1810G-24 - Firmware P.2.2. As I read everywhere that this piece is nearly unbreakable I bought a used one from ebay. When I got it, it had a P.1.1. Firmware, so I upgeded to the latest P.2.2 via 2.1 ...My router is a Fritz!Box 7390 with original AVM Firmware.
Now my problem: If I reset it with the two reset switches to factory defaults w/o connection to my router I can access the managemet interface via Firefox or IE easily. (IP-Switch: 192.168.2.10 - IP-PC:192.168.2.12 - both static)
When I activate DHCP or use a static IP outside my DHCP Range (Range 002-200; IP Switch: 192.xxx.xxx.201) and plug in my cable to the router, I can't access the interface anymore. Even pings get lost.
The HP page is quite reluctant with information and exchanging it is also no option.
View 3 Replies
View Related
Jun 6, 2011
I can't seem to be able to access my wireless routers settings on my iMac, whenever I type my router's ip adress in my browser's adress bar it's unable to connect. According to the network settings menu my router's ip adress is 78.21.0.1, I don't know if that has anything to do with it.
View 8 Replies
View Related
Jun 12, 2013
Few week ago we purchase Cisco ASA 5505 as replacement broken Dlink DFL800. I try to configure all setting like it was on DLink, and all work fine with exception of one thing.
We have some resource like terminal server, that placed in internal network with configured static nat on ASA, some users use it from internal network and some from internet, but both of them use one DNS name for it like terminal.%company_name%.ru. all work fine for internet users when they try to reach server from internet with but internal users unable to use external ip, they even unable to ping external ip address from internal network. Yes i know that one way to solve this problem, is just to use internal DNS server so it can resolve terminal.%company_name%.ru in to internal ip address, BUT i want to know does exsist any way to "loop" trafic this way?
In DLink config there was 3 string in config that solve this problem
<IPRule Name="RDP_Terminal" Action="SAT" SourceInterface="any" SourceNetwork="all-nets" DestinationInterface="core" DestinationNetwork="InterfaceAddresses/wan1_ip" Service="rdp"
[Code].....
View 5 Replies
View Related
Jan 12, 2013
How to apply access list on Vlans ?
my Scenario is
13 Vlans in cisco 3560 switch (Vlan 10,20,30........ 130)
vlan 10 ---- ip range 192.168.10.0/24 interface vlan 10 ip add : 192.168.10.1
vlan 20 ---- ip range 192.168.20.0/24 interface vlan 20 ip add : 192.168.20.1
here i want to block vlan 10 access to vlan 20 i created extended access list deny ip 192.168.10.0 0.0.0.255 192.168.20.0 0.0.0.255
and applied in interface vlan 10 as out now i cant able to access any host in vlan 20 (host 192.168.20.1) but i can able ping vlan 20's gateway 192.168.20.1
View 3 Replies
View Related
Apr 21, 2012
I am using the x3000 as a modem and router, and I managed to set up the device yesterday through the web interface (192.168.1.1).However, after less than 24 hours of continuous usage, I cannot access the interface for some odd reason. I tried using the disk that came with the device but the software reports as if I am not connected to the router. I tried pinging 192.168.1.1 and I get >1 ms so that confirms the device is active and responsive.
View 1 Replies
View Related
May 12, 2013
Months ago i can enter in the camera interface by using 192.168.1.100 , its correct ip to enter in the cammera ? Now i dont know what is happening i connect the ethernet cable correctly from PC to the camera and i type in the browser : 192.168.1.100 but nothiung happen ?
View 4 Replies
View Related
Sep 10, 2012
Just got my server team to install ACS 5.3 on a virtual machine.Unable to access the web interface url...Nothing happens when i try and access this.how i can fault find this as i have cli access.
View 8 Replies
View Related
Sep 26, 2011
I can access our CSSS 11500 through telnet and a serial connection. When I try the web interface, I get:
CVDM Startup Error CVDM has not been granted the necessary privileges to startup successfully, or another unknown error occurred during startup. Please close all involved browser windows and try again by granting all requested privileges.
View 2 Replies
View Related
Feb 8, 2013
I have 2 WLCs (Cisco 5508) in my network. The primary has 16 Aironet 1261 APs connected. Secondary WLC is just staying there and no APs are associated with it. Everything works fine. I was accessing the controller via a wireless client all this time through the management interface 10.74.15.2 using https. It was working fine.But when I tried to access the primary using the wireled network, I can access the seconday but cannot access the primary. They are in the same subnet and I can ping both of them.
View 2 Replies
View Related
Aug 8, 2011
How can I access the we interface of this switch if it is configured to get its IP address from the DHCP server? Since it is DHCP I do not know what IP address has been assigned to it therefore I do not know what ip address to enter in the browser.
View 9 Replies
View Related
Oct 5, 2012
I need the ssh access on my ASA outside interface and have added
ssh ipremoved 255.255.255.255 outside access-list acl_outside extended permit tcp host ipremoved any eq 22 but this is the log i get from ASA
Oct 06 2012 16:10:04: %ASA-3-710003: TCP access denied by ACL from ipremoved/39884 to outside:ipremoved/22
Cisco Adaptive Security Appliance Software Version 8.2(5) Device Manager Version 6.4(5)
View 7 Replies
View Related
Aug 3, 2011
Our SRP527W is working - internet on and SIP phones on but I cannot access the Web interface anymore. When I try to login from any of the machines around I get a "not responding" message.
Before I get to the stage where I have to reset the whole thing and re-do the configuration completely ? I tried powering off and powering on as well as restarting all the switches etc... but I get the same result.
View 1 Replies
View Related
Apr 15, 2013
I can't accsess web-interface on SF-300-24. My computer is on the same subnet. Can only access by RS232. The Switch doesn't answer on ping either. In the manual it says the switch has ip-adress 192.168.1.254.
View 4 Replies
View Related
May 22, 2011
I recently purchased a used 2716, and I just can't seem to access the web interface.i have a Cat5e cable running from my router to Port 1 of the switch. I have my laptop connected to Port 16 via a Cat6 cable.
I have internet access both on managed and unmanaged modes, so that's working just fine. I can't seem to access the web interface however. I've tried both IE9 and FF4.
I followed the instructions to hold down the "Managed Mode" button for 30 seconds, and then wait for the switch to reboot. I've done this a few times just to be sure. This should reset it, but when I try to access 192.168.2.1, it just tells me it cannot access this page.
View 15 Replies
View Related
Dec 22, 2010
I have a problem in my Cisco 1841 in Virtual-Access Interface all interfaces is UP Except Virtual Access is Down . [code]
when i want recover the virtual access to up ,should i do shut & no shut to the ATM interface.What is the cause of the problem, and how I can solve this issue?
View 2 Replies
View Related
Jan 21, 2013
Used to access the FTP server using "My computer" as some reason we cannot use the IE explorer to direct access...However, under the Windows 8 enviornment, it just prompt out "No Such Interface Supported" and cannot direct open the file... but only can copy/copy to folder etc...
View 1 Replies
View Related
Apr 2, 2013
I have a router in front of a few firewalls on an internet link. All traffic from the inside network must go through one of the firewalls to get out through the router and similarly there is a dmz on one of the firewalls.I am trying to make sure the router is fully hardened.Should I apply an access list on the outside interface of the router along with the access list for management access?
View 11 Replies
View Related
Mar 31, 2011
I cant access the advanced user interface web page through the IP address 192.168.2.1. It's a belkin N router that worked for the first few days but now we can't access the Internet wirelessly if we shut the laptop down and reboot. Belkin talked me through every possible way to connect to AUI but no joy. Even tried using firefox, which worked once but we then lost connection again. Getting frustrated now. May take router back to the shop as it's only ten days old.
View 1 Replies
View Related
