Can't Get All My Devices Online At Same Time
Oct 16, 2011We've had this issue of not being able to have all our devices online at the same time for at least a year now...
[code]....
We've had this issue of not being able to have all our devices online at the same time for at least a year now...
[code]....
I can't use both online for some reason. I also can't get my 360 to work online unless I reset my router, and the IP says something like 24.* whatever in the network settings for the 360. I'm fairly knowledgeable about computers, but I barely know anything about networking so bear with me. I think this started after I removed a cable from my router (a different connection that I didn't need any more), and hit the reset button. I'm not sure what exactly it changed to cause this however. I also tried a router of the exact same model and it didn't work.
View 9 Replies View RelatedThere's a splitter (rca home theatre 5-1000mhz) between the tv and the Mac Whenever both cables are hooked up, the internet always cuts out.The wireless on the ps3 disconnects when the internet upstairs is connected.
View 1 Replies View RelatedI have been using the same wireless setup in my home for over a year. We have a Belkin Surf wireless router and an Arris modem from Comcast, using cable internet from Comcast. In the house, we have 5 devices that are set up to automatically connect wirelessly: iPhone 4, an old iPod touch, a MacBook Pro, a Toshiba laptop, and a Brother printer. Until recently, there has never been a problem with connectivity.
Lately, certain devices have been losing connection. For example, last night my husband and I were both using our laptops with no problems.This morning, his is connected and my iPhone is connected,but my Mac is not (I get a timeout error and am not connected to the internet). Sometimes it's his laptop that drops the connection. Other times it's my son's iPod or my iPhone. It is never all of the devices at once (something is always connected), and each device always recognizes the network as existing yet cannot connect to it.
I have also tried to change the channel that the router is set to, but that has not seemed to solve anything. The firmware is up to date. We are password protected in an area with few neighbors, and there never are any unknown devices connected when I check the client list for the router.
I have to put cd in and run setup every time I want to get online. WHY
View 2 Replies View RelatedMy EA 6500 Linksys router does not show online devices. Current firmware version is 1.1.28.146856.
View 2 Replies View RelatedI have a 10nos of cisco 2960 switches and 1no of cisco 3725 gigabit switch. all 2960 switches are parallaly connected to 3725 switch though fiber.
all the switches are having same vlan and public ips for management.
Now I want to upgrade IOS for all 2960 switches at a time, how to up grade IOS same time for all switches.
I have WRT54G2 router. All settings are more-less default and the behavior is following.You start up the router. If you do not connect wireless device within 10 minutes, then you have to restart the router.You have assigned IP via wifi, and when you connect cable device to the router, the wifi PCs are disconnected.
View 3 Replies View RelatedI recently purchased a X2000 ADSL modem/router combination. For some reason the current time will not stay set to the time zone. Rebooting clears the discrepancy for a short time before it drops an hour exactly. I'm in the central time zone and the setting are correct on the basic setup.?
View 1 Replies View RelatedIs the WAG320N iPv6 compatable ? ,or could it be with a firmware update ?.Is the X2000 in the same boat in iPv6 terms as th WAG320N ?.Is there a way of retrieving "UPTIME" / "DSL connection time" information from the WAG320N and also line attenuation stats etc.Wouldn't need the above but poor isp needs keeping an eye on.
View 3 Replies View RelatedI have one 2621 router i want to creat time base access list so that one of my subnet user(10.128.194.0 255.255.255.128) use only internet between 11am to 2pm.
View 15 Replies View RelatedI just bought a WAP321 Wireless AP. I wonder why it cannot sync with our time server automatically. Every time I reboot it, the system time become "Fri Dec 31 1999 12:00:00 UCT". I have to do the sync manually by clicking on the "Save" button under the menu Administration > Time Setting.
View 5 Replies View RelatedAI have a Dir-825 router. The 5GHz is turned off and the wirless is on G/N. I have shawcable for my isp and my firmware is 2.06 and its a Rev B Router. I also have Qos Engine on for allowing me to have 2 xboxes on Open NAT.problem is my wireless signal for some wired reason is VERY weak. A while ago it used to work really far way outside. It was around 150ft distance at 4 bars. Now for some reason I can't even go upstairs without getting a 1 or 2 bar signal.
View 3 Replies View Relatedi have had my dir-655 one year now, have never had wireless problems with it until now.my notebook's internet gets very slow somedays, i just restart my router and then internet speed works normally.i have:
Hardware Version: A4 - Firmware Version: 1.32EU
Ciso 1941 router frozen once a day, sometimes after 2 to 7 days. When the router frozen, no internet connection and cannot login/ping ethernet ports. I can login to console port and copy the error messages below. Reload the router and it will return back to normal operation. Re-installed IOS but still the same.
IOS Version 15.1(2)T2,
Cisco CISCO1941/K9 (revision 1.0) with 487424K/36864K bytes of memory.
DRAM configuration is 64 bits wide with parity disabled.
255K bytes of non-volatile configuration memory.
250880K bytes of ATA System CompactFlash 0 (Read/Write)
[code]...
I have installed my new E4200 and it works beautifully. I have several wirelss adapters and a few wired connections through powerline adapters. I also have a second VPN router attached to the 4200.I can see the wireless connected devices with the associated IP addresses. If I plug a laptop directly into the Cisco, I can of course see it.However, I can see none of the devices attatched to the powerline devices? I have a securty cam connected via the powerline and want to know the IP address. I checked with cisco technical support via chat and they said it is impossible. I have used 2 previous routers with the same configuration and can see all devices.
View 1 Replies View RelatedCurrently my home network is being switched via TrendNet TEGs80G unmanaged gig switches. I have been using them for about a year now with no issues. As my home network becomes more advanced, I recently just added a Cisco ASA5505, I am thinking about swapping those unmanaged devices, 4 of them, to managed. I was looking at the Cisco SG300-10 for upstairs, and a 16 port variant for my main core. These devices do not support full Cisco IOS cli, but they are manageable with a rich feature set nonetheless. My question is, should I swap the unmanaged devices with the more expensive Cisco devices, or just keep what works and save the money until I really need to spend it. As previously stated, my home LAN works just fine as it is, however my WiFi, NTV550s, server and workstations are all on the same network. Probably not the most secure but it is what it is without VLAN support.
View 11 Replies View RelatedAll of a sudden my laptop, android phone and blu ray player (all wireless devices) can't communicate with my wired devices (marantz receiver and samsung tv). Everything still connects to the internet independently but i can't for instance play music from my wireless laptop to my wired marantz receiver. I had no trouble with this last week and didn't change anything (that I'm aware of) I did get Verizon to switch out my router but it didn't solve anything. My wife's computer also cannot connect to wired devices. Lastly, if I connect my laptop with via ethernet cable it sees wired devices fine. I tried shutting off windows firewall but didn't work. I have no other firewall/virus software installed. I can ping to all devices (wired and wireless) from my laptop.
View 1 Replies View Relatedhow many MB/KB do online games use roughly?
View 2 Replies View RelatedMy PC freezes up everytime i go online & i have to manually switch off. Why?
View 3 Replies View RelatedOK I want to be able to play MMORPGS and other online games without any latency (or as little as possible). I have wireless 25mb internet in my house but the router is not in my room it is about 25 meters away in my parents room. I experience latency with my current set up while gaming online so I have decided to switch to wired. What is my best option for doing so? Running a wire through from the router to my room would be possible but I need to know if the length will effect performance and what type of Ethernet cable I would need (including estimated price). The other option is to move the router from that room to mine but im not familiar with how this would be done and what the costs would be
View 4 Replies View RelatedWe have a printer set up on a network... just recently the printer went offline... konica minolta c253... series
View 1 Replies View RelatedI've tried (resetting the router, power cycling everything, MAC cloning, disabling UPnP, changing RTS, fragmentation, and beacon settings, etc) have worked.When I hook up the router I can see the wireless signal with my laptop, but the link light on the modem stays off and I can't get online with either computer. (If I switch things so that the computer is hooked to the "internet" port on the router and the modem is connected to one of the four other router ports the link light blinks like it was online, but doesn't actually work.) When I go to the router status I get all zeros.
[code]...
theres something wrong with my computer, Youtube works fine, but videos on facebook, and other websites dont work. Even when i watch live sports streams, it doesnt work. The video takes ages to load, and keeps freezing and lagging. I have tried many websites and none of them work
View 1 Replies View RelatedI just recently got a new wireless modem from Verizon. So far, the connection with that modem is far better. My HP Touchpad, my Sony Vaio laptop, and my custom built desktop are all connected to the network. Unfortunately, that is not the case for my HP Mini1000 notebook. It detects the network connection; but, it cannot connect saying that it is unable to verify the certificate.With all the other devices, all I had to do was put in the WEP key and they were connected to the network. But, the HP Mini does not give me that option. How do I get the notebook to connect to the net?
View 1 Replies View Relatedmy computer is running windows xp, even though my computer is connected to the wireless router i can't access the internet.
View 1 Replies View Relatedabout 3 or 4 days ago i tried to set up a minecraft server. I opened up my routers page using the ip adress to conifgure the settings, changed the settings and logged out. After that i couldnt connect to any web pages yet the internet was still connected. I have tried looking for a way to fix this for days. I have tried ipconfigs renewing and flushing my dns nothings working. In trouble shooter it says that its a problem with the dns server. Im running windows 7 home premium 64 bit.
View 13 Replies View Relatedwhen i try to go on my online banking it says internet not available but could go on it before
View 3 Replies View RelatedMy friend made a "troll" account on facebook and he would try and piss people off. Well he said some stuff and one person said they would get someone to track him down even if he used a fake account. I don't think it can be done, but he thinks that they can find him.
View 1 Replies View RelatedMy ISP is Bright House. They installed a new modem a couple of weeks ago to fix the problem with the phone. Since then, however, only 1 of 2 PCs will go online. Everything's connected correctly, and it shows that there's a connection. Here's what I've tried so far, but to no avail:
Reset/replug everything.Manually set IP address and DNS settings.Using "ipconfig/renew" in command prompt to try and change the IP address.
I've talked to Bright House support about this, but they haven't been any hope. All they said was to contact the manufacturer of my router, but it looks like a discontinued model (some sort of Linksys). I bought a new D-Link EBR-2310 router, but I'm having problems with the installation of the firmware.
I randomly get disconnected from the online applications that I'm using.(Msn, skype, online games, etc.)And I'm running this program in the background to check what's going on.As you can see, everything is normal till I get 0 ping for a couple of times, then it immediately goes back to normal till it hits 0 ping again.It's very random, it happens on the 345th hop or 789th etc.I'm on a wi-fi connection but not using wireless modem.The cable's plugged to my computer.
View 14 Replies View RelatedWhen I boot up my computer, I have two internet connections, one Home and one Public. I can't access the internet while they're both active. The only way to get online is to disable and re-enable the wireless adapter.
View 7 Replies View RelatedI am looking for a way to hide all that information that can be retrieved about me, for example browser, OS, resolution, location, etc.. Is there a way to prevent the sites from getting that info?
View 2 Replies View Related