Can't Get In Because Of Invalid Password
Feb 7, 2012Can't get in tells me password invalid.
View 1 Replies
ADVERTISEMENT
D-Link DIR-655 :: Keep Getting Invalid Password?
Apr 18, 2011I was trying to get into the router the other day and it gave me invalid password consistently. I have hardware version B1 and firmware version 2.00NA. This had been working fine but this along with remote desktop no longer work.
View 5 Replies View RelatedCisco :: WLC 5508 Password Invalid?
Jan 23, 2011I did some testing in WLC in our company wireless network.However, after my 3 hours testing, I had tried to login WLC again by GUI and SSH. The admin username and password does not work any more. All Read only and Guest Account did not work as well.Is any one had this issue before? Is there a restriction for access to WCL per 3 hours or one day? By the way, I did not change any password.
View 8 Replies View RelatedDLink Dir 655 Router - Password Invalid For IPod
Dec 3, 2011I have a d-link router model dir 655.To activate my laptop all that was required was to enter the wps pin.I just purchased an apple ipod touch which is asking for a password.I first tried the wps pin.Then I went to the d-link website and put in my model #.It gave me an ip address which brought up a page where there was a choice admin or user.I picked user.The second choice was to put in a password which I did.The Ipod still says password invalid.I tried numerous times.
View 1 Replies View RelatedBelkin Routers :: N150 Password Is Invalid
Oct 27, 2012Just bought the N150 router. Trying to enter the router setup for the first time. I leave the password blank like it tells me to, but it says i have an incorrect password. Tried pressing reset button for 10 seconds, but get same result.
View 8 Replies View RelatedD-Link DCS-942L :: Invalid E-mail And Password Combination
Jan 12, 2013I have successfully installed a DCS-930L camera. However, when I add a second DCS-942L camera everything stops when I enter my existing account and password stating that they are incorrect (which they are not). The answer I get is: "Invalid e-mail and password combination".
View 2 Replies View RelatedCisco Firewall :: ASA5520 Username Password Invalid?
Nov 3, 2012Two 5520 firewall configuration of the failover and SSH, the first remote landing SSH, can use user and password successful landing, again landing, to prompt the user name password is invalid, what is the reason?
View 4 Replies View RelatedCisco AAA/Identity/Nac :: CS Password Invalid ACS 4.0 Window Radius
Jun 7, 2011Cisco Secure ACS 4.0
View 2 Replies View RelatedD-Link DIR-655 :: After Firmware Upgrade - Get Invalid Password Error Message
Mar 15, 2011DIR-655 RevA4 - upgraded to 1.35NA, which is shown on http://192.168.0.1/
When I try to re-log in as Admin, I get a message of invalid password. I have unplugged to reset, but still cannot get back in.
AAA/Identity/Nac :: ACS 4.0 / 4500 Switch - External DB User Invalid Or Bad Password
Apr 19, 2011I have problem with Cisco ACS 4.0 "Windows" with core 4500 switch "cat4500-ENTSERVICESK9-M 12.2" the problem shows only on one device "x.x.x.x" the problem is " Authen failed-------badcred------External DB user invalid or bad password" i can see it in failed attempt. on the same side i can see in Passed Authentications for same record "Authen OK", i can login to the mentioned switch using my ACS credentials and not local database credentials
can debug this from ACS if not how can view the authentication records from core switch?
Linksys Wireless Router :: WRT54G2 Kindle Password Is Invalid
Sep 1, 2012I have WRT54G2 that I've set up my wireless network on. My Kindle, just the basic one, sees and recognizes the network. It has good signal from it. When I attempt to sign in though the Kindle says my password is invalid or it says it just can not connect. I have gone over and checked what I hope are all the settings but to no avail.
View 1 Replies View RelatedCisco Switching/Routing :: 1921 Default Password Invalid
Apr 17, 2013I bought a cisco router last week. The reseller said it is a brand new one. However, when I try to set it with console cable connecting to PC, the default password does not work. I tried to use control+break to get access to rommon for password recovery. The tera term pro displayed nothing at all! In thin case, what should I do to setup the router? Dose the reset button in the back work to restore the router to factory setting(which means i can use default username and password)?
View 1 Replies View RelatedTP-Link 3G/3.75G Router :: TL-MR3420 - Unable To Open Configuration / Invalid Password
Jan 27, 2013Region : Others
Model : TL-MR3420
Hardware Version : V2
Firmware Version : 2.1
ISP : PTCL
trying to connect to router configuration (after several factory resets) at 192.168.0.1 but each time screen displays invalid username / password,doesnot even display username / password window,using admin as username and password,just cannot log on to configuration setup
Cisco Firewall :: ASA5520 Cannot Connect VPN / It Will Prompt Invalid Username And Password
Jan 29, 2013I have a ASA 5520 which is intended to use as a VPN for clients using PDA, I think the PDA is a very old product that the VPN only support CHAP/ MS- CHAP, but seems it cannot connect the VPN, it will prompt "invalid username and password" (but in fact the username and password is valid when using PAP), below is the log i captured from the ASDM when the PDA is connecting the VPN. when i tried to connect it in windows PC, I also have the same issue if the VPN setting is using MS-CHAP, if I choose PAP, it can connect with no problem. But the PDA has no option of PAP. [code]
View 0 Replies View RelatedWindows 7 Ip Invalid
Sep 16, 2012Can't access the internet ...ip invalid...unidentified network...
View 1 Replies View RelatedInvalid Next Hop Address
May 2, 2011I have made a test lab on packet tracer with three routers in triangle shape after each router i connected a switch with on each switch four end devices . now i want to make a routing table on each router, but the probleme is that each time i get an error "invalid next hop address ( its this router)". i am sure its the right gateway i type in .
View 3 Replies View RelatedInvalid Network Configuration?
Apr 7, 2011i am getting the message invalid network configuration why does this come
View 3 Replies View RelatedInvalid Ip Configuration Every 1 Hour?
Mar 1, 2011i already tried resetting my ip but im still loosing connection every 1 hour :(
View 4 Replies View RelatedInvalid IP Resolving To Hostname
Dec 8, 2012I have a small workgroup at home of about 4 or 5 computers. All the PC's, notebooks are running W7. I have one PC that I use as my "always on PC", with all my media and resources I use on it. The NetBIOS or computer name assigned to it is mediapc with a static IP of 192.168.254.150. All my other desktop PC's, excluding the notebooks, have a static IP also.The problem is more annoying then anything, and thus I only work on it intermittently. Today I decided to post after wasting much of another day attempting to resolve the issue.The problem is accessing my mediapc from any of my other computers while using the computer name, "mediapc". If I use the static IP assigned above, there is no problems. Everything works, RDP, Dameware, Telnet, SSH, Ping,Tracert, etc. If I use the computer name "mediapc" then it fails with an unreachable host error or similar. The reason it fails is because somewhere in my network or in the mediapc itself, it wants to resolve the "mediapc" name to an unknown IP of 192.168.254.47.
Now with this said, I can still share files and access the mediapc using the name in a UNC syntax, like //mediapc/data works fine or directly clicking on the mediapc share under Network works also. If I Ping mediapc from any other PC than itself, it fails with the 254.47 IP. If I try to use any remote connection software and use the name mediapc, it fails to connect.This is what I know and have tested:
1. Adding a host entry to all the client computers works but does not fix the root of the problem.
2. nslookup mediapc reports the wrong IP of 254.47
3. Remote connections as I mentioned above fail because the name is resolving to an invalid IP.
4. Pinging mediapc from itself, displays the correct IP of 254.150, although I have to use the -4 parameter.
5. Arp -a on all PCs report correct IP of 254.150 with the correct MAC address. (There is no 254.47 listed)
6. NBTstat -a mediapc reports correctly and shows the correct MAC address.
7. Network shares work correctly from and to the mediapc without issue. No access problems.
8. I have deleted all arp entries and flushed the dns with no change.
9. MS mentions to change order of the Bindings of the adapters, yet I only have one Local Area Connection.
My PC Says Invalid IP Address When Try To Connect
Jul 31, 2012My PC says "invalid IP address" when I try to connect. It says the IP address is 00:00:00:00. it only does this on the computer but works fine on all our laptops. I've been googleing solutions and i have tried the 'ipconfig/release' and 'ipconfig/renew' but this doesn't work. It just comes up with a error (I think its because the computer cant connect). We use a Belkin wireless connector. Its windows xp.
View 1 Replies View RelatedLimited Access - Invalid IP Address?
May 12, 2012My laptop running Windows 7 has been fine until this holiday, connected to a hotel wifi that "trapped" the broswer and requested a login and password. That worked fine, but now I cannot access any other wifi networks.It sits for a while after entering the code and then has limited access, running the troubleshooter it says that I have no valid IP address?Tried IPCONFIG /RELEASE and it is saying "No operation can be performed on Local Connection 2 while it has its media disconnected"
View 8 Replies View RelatedInvalid Ip Address During Wireless Connection?
Aug 11, 2011i'm getting invalid ip address during connection to nearby wireless network
View 1 Replies View RelatedInvalid Access To Memory Location?
Jan 15, 2012My son ran some program that he didn't know what he was doing and now there is no Network access. As far as I know this is what caused the problem, but I'm not certain. When I tried to reinstall the drivers an errors pops up stating that the drivers couldn't be installed due to "Invalid Access To Memory Location". The networking card is an Intel 82566DC-2 Gigabit Network Connection Adapter. The Networking card is part of the Motherboard. I have the original drivers but they will not install due to the "Invalid Access To Memory Location". Anyhow my son went and bought a new networking card, and it gives the exact same error. I tried uninstalling the networking card in the device manager, but when the hardware is reinstalled, and the drivers are about to install it gives the same error. computer is a Dell XPS 420 with 6 gigs of RAM, an Intel Core 2 Quad CPU Q6600@2.40GHz Also in the Device Manager everything under the Heading Network Adapters has a Yellow Triangle with an Exclamation mark in it. I know that this means that there is an error somewhere. I also want to add that when I checked the Netgear GA311 Network adapter card (this is the new card that my son bought)in the Device Manager it says This Device is not working properly because windows cannot load the drivers required for this device (code 31).
View 9 Replies View RelatedLinksys Cable / DSL :: AM200 Consider Invalid IP 2.113.120.209
Jul 26, 2011I'm trying to setting up a Linksys AM200 in routing mode, with static ip (WAN), but when I insert 2.113.120.209/30 ip and subnet, a popup show up and sais that the ip si not valid. The same happend when i put the address in local side.
I put the same configuration over another different device and everything goes fine.
I reset the configuration of the AM200 from the factory defaults
Cisco WAN :: 2911 - Why Static Nat Is Invalid
Jun 3, 2012why this static nat is invalid The following is config
ip nat pool wan xx.xx.xx.xx netmask 255.255.255.240
ip nat source static tcp 192.168.2.5 5555 xx.xx.xx.xx 5555 extendable
ip nat inside source route-map office pool wan overload
penghai#show ip nat trans
Pro Inside global Inside local Outside local Outside global
udp xx.xx.xx.xx:31 192.168.2.5:137 192.168.2.255:137 192.168.2.255:137
udp xx.xx.xx.xx:32 192.168.2.5:138 192.168.2.255:138 192.168.2.255:138
tcp xx.xx.xx.xx:3648 192.168.2.5:3648 23.11.206.176:443 23.11.206.176:443
tcp xx.xx.xx.xx:3652 192.168.2.5:3652 23.11.206.176:443 23.11.206.176:443
udp xx.xx.xx.xx:40 192.168.2.11:137 192.168.2.255:137 192.168.2.255:137
Cisco :: LMS 3.2 - Invalid Syslog Messages
Aug 22, 2011I have a small problem with a lot of invalid syslog messages in LMS 3.2. Something about 30% of all messages are invalid.
Is there any posibility to get out from which devices those messages are?
Is it a big problem for the application if there are such a lot of invalid messages? I have a lot of devices in my LMS and don't want to get high load because of such unneeded messages.
Invalid Ip Address Local Area Connection?
Jul 2, 2012howdy,im having trouble with my LAC.it just keeps identifying.i have tried everything,uninstall/reinstall, netsh winsock reset,netsh int ip reset,disable/enable.windows diagnostics comes back with invalid ip address,and modem hardware failure.device manager lists the network adapter as working,yet it doesn't here's my ipconfig[CODE]
View 5 Replies View RelatedNetbook Won't Connect Wirelessly - Invalid IP Address
Dec 29, 2012I have a 7" netbook but won't connect wirelessly it comes up invalid ip address
View 2 Replies View RelatedWireless Network Connection With Invalid IP Configuration
Sep 1, 2012Sometimes the router has too many devices connected to it and the other people living with me don't understand this so they keep their iPhones, iPads, laptops, et cetera connected via WiFi even though I tell them to turn off the WiFi setting when they're not using it. So it kicks me off constantly, not sure why, but I don't mind too much. Basically when I'm "connected" but not really connected I remotely reset the router so I don't have to walk upstairs all the time.
I've reset it without troubles before. But did it tonight and now it's completely screwed up. I run a windows diagnostics test and it comes up with: "Wireless network connection doesn't have a valid IP configuration."
[URL] Here's my ipconfig /all
Code: Microsoft Windows [Version 6.1.7600]
Copyright (c) 2009 Microsoft Corporation. All rights reserved.
C:Windowssystem32>ipconfig /all
[Code]....
D-Link DIR-655 :: Invalid MAC Address In Network Filter
Jul 4, 2012I installed the 2.06NA on my DIR-655 router and now I'm having problems adding mac addresses to the network filter. The message is "Invalid MAC address". Of course, it doesn't tell me which entry is invalid and I have a number of them. After further checking.. I noticed that one of the MAC addresses is indeed invalid and when I remove it I still get the error message?
View 1 Replies View RelatedD-Link DIR-615 :: MAC Address Entered Is Invalid For Ipad
Jun 3, 2010I am unable to reserve an IP for my iPad, i.e. add my ipad to the "DHCP RESERVATIONS LIST". I get a pop-up saying "The MAC Address entered is invalid." The address starts with "D8". My understanding is most start w/ "00". The router says my firmware is up-to-date (3.01).
View 11 Replies View RelatedD-Link DIR-825 :: Network Filter - Invalid Mac Address
Dec 29, 2009I had no problem running both 2.4 and 5.0 Bandwidth. With WiFi password and without. It does it's job. The 2.4Ghz Range Plus works. I have set up the router on the 2nd floor at the highest it can go. And everyone get's full bars all over the house. I even get 4-5 bars outside in my car on my phone.
The only issue I have with this thing is a damn new netbook I got for Christmas with a Mac Address starting with 0C-EE-E6-XX-XX-XX. The Router finds the Mac Address invalid. In which I can come to understand cause seeing a Mac Address starting like that is completely new to me. Every Mac Address I have, started with 00 except the netbook. So now, I spent days trying to find firmware updates, patches, anything! I even attempted to spoof the Mac Address on the netbook but Microsoft has a bug on Windows 7. (I have the Starter Edition that came with the netbook)
Windows 7 Mac Spoofing works with WIRED Connection. But it does not work with WIRELESS Connection. I used 3rd Party Tools: SMAC and etc... I attempted Registry Edits, I changed even the value key to the "Orginal Mac Address" and it just wont change [New Strings/Network Address Edits included]. I have been banging my head about this for a week now. The Internets has many answers but they did not work. So Spoofing the Mac Address is out of the question. Until Microsoft fixes this bug.
Anyway: Did D-Link release any sort of beta update/driver/firmware or anything to resolve this at all? Is there a modded firmware to force the Router to take this stupid paradox of a Mac Address?
Currently: I have the Router's WiFi Password-ed with Default Factory Settings
{Hardware Version: B1
Firmware Version: 2.02NA}.
D-Link DIR-825 :: Host Name Invalid When Reserving An IP Address?
Apr 26, 2011Issue: When I attempt to save the changes I made to the DHCP reservation list I get an error window that reads:
http:\201.201.201.201 (my internal router IP address - changed from 192.168.0.1)
Host name Invalid I have a DHCP Range setup as 201.201.201.100 to 201.201.201.199
I'm attempting to reserve an IP address of 201.201.201.199 for one of the computers on my network.
I can see the computer on the dir825 router and am connecting to it through a linksys wrtgs working as a repeater bridge running dd-wrt. The computer in question is successfully getting it's IP address from the dhcp server on the dlink router.
The dir825 is running 2.05na firmware. Why am I unable to reserve an IP address?