So my router, the "Siemens Gigaset SE567", doesn't seem to want to allow me to access the router page.
Everywhere I've looked online tell me that the IP is http://192.168.1.254/ and default PW "default" and "telus". But no matter how many times I reset the router...going to http://192.168.1.254/ loads nothing.
The router SAYS Gigaset SE567 on it, and looks identical to the one in the picture...so theres no mistaking it for another router.
i need to get into the web page because i need to open my XBL nat and when i type in the password to get into the routers page i get a blank screen
View 2 Replies View RelatedI type it into google and it just loads normal search options. We have a Thompson Reuter. I am trying to get an open Nat type for xbox live but nothing is working right.
View 3 Replies View RelatedI was trying to work with a friend set up his wireless router. He had the Geeksquad come and set it up and I have no idea what they did. A mess of wires. I noticed that I was able to log into the imbeded browser of the modem and the router from the main PC. I didn't think it was possible to log into the modem if it was set up in bridged ethernet mode. His internet is working but I was thinking that he may have problems with double NATing.Basically, I just want to know what options there are for setting up a router to a modem. I'm aware of bridged mode and setting up the router as a switch (not real knowledgable of this one). Seems like DHCP is enabled on both devices.
View 3 Replies View RelatedI'm using the e4200 in a big old house with lots of walls, including rooms separated with brick. Wiring access points would be difficult given the problem of pulling wires. I do have lots of kids and devices connected including DirecTv, iphones, ipads, laptops, and PS3. Is there a range extender? Do I care if an extender only supports 2.4Mhz if I use the same SSID anyway?
View 5 Replies View RelatedCan the EA4500 be wall mounted? I don't see any provisions on the underside EA4500 to support securing to a wall.
View 9 Replies View RelatedI am going to get some wyse thin clients up and running on our departments. Each department communicate with the main-office through Cisco C1812 routers.
In order to get functionally DHCP up and running, I need to
A - Configure some Dhcp options on the C1812 routers
B - Perform a DHCP relay from each department to the main-office
Option B will cause some additional issues, so is not preferred.
The question is: Does the Cisco DHCP-client have an option for configuring DHCP options? I need to put in among others, an option 161, a string value pointing to a ftp-server. Can this be done? And if it can, what is the right syntax
I have recently started working here, therefore I am not certain of the IOS-version on the router, as I still not have the logon-information, but I will aqquire this shortly.
I am trying to set up vpn tunnel between ASA and router C2921 for site-to-site routing. This was described on many sites. However I do not have required option under crypto command.
g1c1router1(config)#crypto ? key Long term key operations pki Public Key components
g1c1router1(config)#crypto
There are no crypto map etc options.
Some people suggested that I need crypto IOS. I have:
boot system flash:c2900-universalk9-mz.SPA.152-4.M3.bin
license udi pid CISCO2921/K9 sn FGL171910C1
Do I have to generate some keys? How do I do it? crypto key generate ?
I got Fios installed this week. Router is the Actiontec MI424, it sits int he living room. I ran a speed test of the wifi on my laptop in the living room, and the internet speeds were great. Here's my problem. I'm in a 2 br condo, not a huge place maybe like 1200 Sq feet, same floor. Wifi is awesome in the living room, but in the bedroom it hangs. I still have a signal, varying for low to good, but it takes forever to open a web page, to the point where you can't use the internet. Bedroom is just down the hall.I called Verizon. They told me they can only guarantee the wifi signal 10 feet from the router, after that no promises. My frustration is that with my previous provider, which was giving me a slower internet connection, my wifi in the bedroom was fine and the router was in the exact same spot. Of course I used my own router? I know there are instructions on connecting my old router to the fios one and using my old router for wifi.
View 4 Replies View RelatedI own an AG214 ADSL2 router that I use for my desktop PC. I now however also have a WRT54GL for wireless connection. I connected the WRT54GL to my AG214 via ethernet. Everything works fine, I have wifi and I can use it to connect to the internet. However when I go to my router (192.168.x.x) I can't seem to be able to find a wireless tab to configure my wifi settings. The network right now is unsecure and has a default name (linksys). How do I access my wireless settings? When I access my router it does go to the AG214, do I need to access the WRT54GL? If so, how do I do that?
View 4 Replies View RelatedI have been having some issues connecting my PC to my XBox360 using the wired approach, it seems to be massively temperamental to a point i decided to not connect the XBox via my router and instead put it straight into my spare network port on my PC. The basic jist of mynetwork confirguration is something like this: Internet cable > Virgin Media 256 Modem > Linksys BEFSR41 Router > PC. I had no issues with this setup, but as soon as i wanted to add my XBox into the mix, things got tricky. I plugged the network cable from my Xbox originally into one of the ports on my router and then went through the settings on both my Xbox and router. Again, i had absolutely no confidence in doing this myself since i don't mess with it, but after reading guides i finally got it sorted. Well, partly sorted. I was able to connect to my Xbox Live, however i was unable to connect to my Xbox to my PC (To stream files onto the Xbox). This was what i wanted to do, i didn't really want to use the Live anyway. So i went off to work again. In the end nothing was working, so i opted to connect my Xbox directly into my PC - So it was no longer connected through my router. I could SEE my PC on my Xbox, but i was unable to connect to it to stream anything. I then opted to disconnect my router (For no other reason than to rule it out) - Sure enough, the very second i disconnected the router, i was able to instantly connect to my PC and was streaming straight away. Once i was streaming, i was able to reconnect my router and that was that. But if i turned off my Xbox i would need to also turn off my router the next time i wanted to stream. How can i fix this so i don't have to continually turn off my router, is there a setting somewhere in the options on my router which can allow me to connect to my Xbox? Windows 7 Xbox 360 Linksys BEFSR41 - 2.00.02 Firmware
View 1 Replies View RelatedI have a hobby network at home, the structure of which follows:*Modem * - active SPI firewall -- Then the E4200 distributes data via wifi to/between the following machines --*Server - providing services such as http, FTP, VPN, Mail, MySQL, OpenDirectory, Plex media server, etc.*Two other workstations that access their user details/settings from open directory on the server.Now the purpose of this network other than providing standard access to Internet services from within the LAN is to provide access to the services maintained on my server to users on my LAN when they leave it/go mobile.Now with my limited knowledge of networking I have been using port forwarding to direct service requests through the firewall, however I have found with the E4200 that I have a limited number of custom port fields to use (about 15) which is extremely limiting when I have as many potential services that my server can provide.I could move the Server to a DMZ but then dosen't that put all my other services that have no need to be exposed at unnecessary risk.Do I need to invest in a separate hardware firewall and put it after the modem and before the router?
View 1 Replies View RelatedI have ASA 5510 with CSC-SSM-10 .ASA 5510 IOS version- 8.4.2 and CSC-SSM-10 IOS version 6.6.1162.Web filtering is working fine with respective to my configuration.From yesterday morning, i was facing issue with the sites like gmail, webmail.After giving credentials like username and password in the web page, the page is not resonding.In troubleshooting process, i removed all the acls, class maps which will direct all the traffic towards the CSC. In this scenario all my mail service sites are opening.If we apply the these ACLs and Class-Maps, only my mail service sites only affecting.
View 1 Replies View RelatedI am configuring Clientless SSL VPN on ASA5505 with 8.2(2)17. After the login, default page should be "Home", but if activating "Anyconnect". it always goes to Anyconnect as a first page. If disabling "Anyconnect" using SSL VPN Customization Editor --> Portal --> Application, it always goes to the other one. Never get "Home" as a first page, can I set the first page manually?
View 3 Replies View RelatedI just recently got out of school and started my first job in the IT field. I'm at a small company and part of a 2-man IT team.One of our current projects is to look into upgrading our software based firewall (ClearOS free version) for a better hardware one. I was wondering what would be some good options?Our company has around 120 users that access our network. We have one 10Mbps internet line that comes to our head office, and is then shared with our six other branches. We're hoping to just get one device we put at our head office.some of the nicer features we'd like are AD integration, usage reports by user, easy to use interface, spam-filtering, and ability to block specific applications on websites (eg, only chat on Facebook).
View 1 Replies View Relatedwhat is DOS command to list all servers related to network we are on home network not used to connect to any work network. Yet there are many different network and local servers and services listed as active in task mgr.Do not u have to hire servers
View 7 Replies View RelatedAfter moving my PC for the 3rd over the past year ive decided that having a more wire-"less" option may be the better option as supposed my previous method of having a 10m ethernet cable from my switch to my PC. ive looked at two options, first the powerline HD (was drawn toward the belkin 1gigabit ones as i have a gigabit switch) or to remove the cable completely and using a USB wireless dongle (similar to the Edimax EW-7811UN Wireless 802.11b/g/n 150Mbps Nano USB Adaptor) . i havent had much experience with these USB wireless things as i used be put off by the compatibility and config (software stuff). i have a 3com wireless 54mbps.. PCI card but i cannot install the drivers for it on my xp 64bit machine.
View 2 Replies View RelatedI have been using the old standard networking devices for years, 10/100 over CAT5 with Walmart off-the-shelf routers. Let's say I want to speed my network overall. I notice there are many systems and routers offering ten times that speed over wired and WiFi.I'm primarily interested in wired.
View 1 Replies View RelatedI brought a friend's computer home, thinking I could solve her problem but I'm at my wit's end. I cannot open Internet Explorer and Internet Options does not open from Control Panel. I followed other suggestions I found on your forum and on the net but nothing works. I cannot access the internet in any way (on that computer) and therefore cannot even supply you with a HiJack file. I tried several restore points and the only malware pgm on that computer is MalmareBytes (which found nothing). I cannot even run a anti-virus scan because that is no longer running - which is the reason I brougth her computer to my house in the first place. After several attempts of trying to open IE some times it stays open for a few seconds but most times it just flashes, then closes.
View 1 Replies View RelatedI have a 1-Port 3rd Gen Multiflex Trunk Voice/WAN Int. Card - T1/E1 in a 2901 that I want to configure for data only (T1 connection to the Internet)I don't see any options in the IOS for using this thing as a serial interface (data), only options for configuring PRI/ISDN.
View 5 Replies View RelatedUnable to access router admin page for Haier model R800
View 1 Replies View RelatedWhen I try to go to192.168.1.1 it says connection interrupted. If i use the Cisco Connect it tells me i am not connected to the internet. My pc is connected via ethernet cable. My son can pull it up on is laptop and is connect the our Linksys E3000 wirelessly. I can go online, I just cant get to the router.
View 9 Replies View RelatedI want access the my E1200 website in order to implement new username and password to secure the network.
View 1 Replies View RelatedI have a dlink dap-1360 which my computer technician installed for me earlier this year. i would now like to edit the details such as network name etc.how do i get to the settings page of my router.
View 1 Replies View RelatedWe already have wired network and some access points. Today one addition wireless access point (wireless router) is purchased. I'm confused how to start off though I know to configure after I read some articles(disable DHCP, and give lan ip) . In the router, it is written 192.168.1.1, id : admin, pass : admin. We already have router with 192.168.1.1 so if I type 192.168.1.1 , it opens the page of that router. How to open the new router page?
View 6 Replies View RelatedIt usually consists of installing routers in units. Occasionally I have to change the routers IP address to keep it from conflicting with other routers. To do so, I need to get to the router options to do that. Normally, typing in 192.168.0.1 gets me there with no problems. Sometimes it's a 10.0.10.1. (They have D-Link DIR-615 routers.) To make sure I know which address I need, I use the cmd and ipconfig /all. Some of the routers spit out an IPV6 address instead of the IPV4 that I need to access the router. Even after a factory reset, it still does this. I can't get in to change anything.
View 4 Replies View RelatedWhenever I click on "Tools," then "Internet Options" in Internet Explorer I get the following message: "This operation has been cancelled due to restrictions in effect on this computer. Please contact your systems administrator
View 1 Replies View RelatedISP has recently announced that they are going to start charging $1 for every GB that their customers go over their monthly limit. i have a 100GB/mo package and i figure that's sufficient for my habits which consist of approx 40GB of torrents, a bit of skyping, bit of browsing, etc. my ISP makes usage graphs available online, when i checked earlier last month to confirm i'm staying under my 100GB limit the graphs said over the past 12 months the highest i topped was 90GB, usually in the 70's. pretty much what i expected. but when i check their usage graphs again recently it says i've been using over 400GB for the past 3 months straight (as far back as the new graphs go). i call BS and find it very suspicious that my internet usage magically quadruples the same time my ISP wants to start charging for overusage, especially retro-active.
anyhoo, i want to somehow monitor my internet traffic usage independently but i'm not sure the best way to go about it.my home network is the typical modem -> router -> LAN.my router is a new netgear wndr3700, it has a traffic meter built in, but considering it's only forms of notification is cutting the internet off altogether or changing a green blinking LED to and orange blinking LED when the defined limit is reached, it's kinda useless. i just got it a couple months ago too, so buying a new router with better traffic monitoring isn't an option.i could put a net meter on each and every computer i have, then sum up their usage stats, but that would be a pain in the ass and wouldn't take my PS3 or WDTV media player into account, as little as they're used online.my prefered solution is to use an old laptop i hardly touch anymore and set it up as a gateway and share the internet connection or make it a proxy server. that way i could set up a net meter on just the one NIC on that to track my internet usage. modem -> laptop -> router -> LAN. the problem i have hear is forwarding ports from one NIC to the other so they can then get ditributed by the router, never tried this before, not sure how to go about it. right now it has XP home, but i can put 7 on it if that's better to work with.
I'm putting together a design for a new office with the following requirements:
10 VPN users.For Ethernet – 24 ports POE 10/100/1000
Probably go with VZ FIOS so EthernetAbout 2000 square feet so 2 WAP's should do it I'm thinking a CISCO881W-GN-A-K9 ISR with a SRW224G4P-K9-NA switch should do the trick. This will give me an integrated AP but I need a second one. Do I need to order an autonomous one or does the 881W do some sort of WLC function?
I was pondering on getting a certificate fro ma public CA to maintain easier configuration for end users. There will be a multitude of devices on this wireless network configured with 802.1x PEAP. (iPhones, iPADs, Droids, and PC's of course).
If you were to get a certificate from a public CA, I'm assuming this would be just a regular server certificate from GoDaddy, or Verisgn?
Moved into a new place, set up a connection. Server provider gives only one mac address, they set it on my router. They say that it should be working, make a restart and that's it. I did that but still no connection. Moreover, I cannot connect through the router at all and therefore cannot access router admin page to configure it either. Now what to do? Password for the router is correct. Even when I take down all the security, still I cannot connect.To be more specific, at first I could enter the router admin page, but since I didn't know how to configure it properly, I made some mistake. I think I choose setting "configure wireless network" and changed something there. After that I cannot access the admin page or connect through the router.
View 1 Replies View Relatedi need to do the following:
-go to routers startup page
-log in
-look for my WAN MAC address
it seems so easy, but i keep getting instruction to do things like type in different numbers into my browser which never work.
I have a wireless Netgear extender, and can not find set up page..Can't access own router configuration page
View 3 Replies View Related
