what is DOS command to list all servers related to network we are on home network not used to connect to any work network. Yet there are many different network and local servers and services listed as active in task mgr.Do not u have to hire servers
View 7 RepliesI have recently changed my broadband router and the IP address has changed from X.X.1.1 to X.X.1.247. Previously I had set the IP address of my HP printer to X.X.1.247 so it now clashes with my new router. When I try to access the printer's set up page to change it I of course go to the routers home page.How can I change the printer's IP?
View 4 Replies View Relatedhow do I change the ip address of a wireless printer?
View 4 Replies View RelatedI want to know if you could tell me how to I change the ip address on a Lanier Printer
View 1 Replies View RelatedMy wireless printer has a permanent IP address but since I have changed broadband providers I do not know how to change this to the new network. The printer cannot be detected on wireless.
View 3 Replies View RelatedI just recently got out of school and started my first job in the IT field. I'm at a small company and part of a 2-man IT team.One of our current projects is to look into upgrading our software based firewall (ClearOS free version) for a better hardware one. I was wondering what would be some good options?Our company has around 120 users that access our network. We have one 10Mbps internet line that comes to our head office, and is then shared with our six other branches. We're hoping to just get one device we put at our head office.some of the nicer features we'd like are AD integration, usage reports by user, easy to use interface, spam-filtering, and ability to block specific applications on websites (eg, only chat on Facebook).
View 1 Replies View RelatedAfter moving my PC for the 3rd over the past year ive decided that having a more wire-"less" option may be the better option as supposed my previous method of having a 10m ethernet cable from my switch to my PC. ive looked at two options, first the powerline HD (was drawn toward the belkin 1gigabit ones as i have a gigabit switch) or to remove the cable completely and using a USB wireless dongle (similar to the Edimax EW-7811UN Wireless 802.11b/g/n 150Mbps Nano USB Adaptor) . i havent had much experience with these USB wireless things as i used be put off by the compatibility and config (software stuff). i have a 3com wireless 54mbps.. PCI card but i cannot install the drivers for it on my xp 64bit machine.
View 2 Replies View RelatedSo my router, the "Siemens Gigaset SE567", doesn't seem to want to allow me to access the router page.
Everywhere I've looked online tell me that the IP is http://192.168.1.254/ and default PW "default" and "telus". But no matter how many times I reset the router...going to http://192.168.1.254/ loads nothing.
The router SAYS Gigaset SE567 on it, and looks identical to the one in the picture...so theres no mistaking it for another router.
I have been using the old standard networking devices for years, 10/100 over CAT5 with Walmart off-the-shelf routers. Let's say I want to speed my network overall. I notice there are many systems and routers offering ten times that speed over wired and WiFi.I'm primarily interested in wired.
View 1 Replies View RelatedI brought a friend's computer home, thinking I could solve her problem but I'm at my wit's end. I cannot open Internet Explorer and Internet Options does not open from Control Panel. I followed other suggestions I found on your forum and on the net but nothing works. I cannot access the internet in any way (on that computer) and therefore cannot even supply you with a HiJack file. I tried several restore points and the only malware pgm on that computer is MalmareBytes (which found nothing). I cannot even run a anti-virus scan because that is no longer running - which is the reason I brougth her computer to my house in the first place. After several attempts of trying to open IE some times it stays open for a few seconds but most times it just flashes, then closes.
View 1 Replies View RelatedI have a 1-Port 3rd Gen Multiflex Trunk Voice/WAN Int. Card - T1/E1 in a 2901 that I want to configure for data only (T1 connection to the Internet)I don't see any options in the IOS for using this thing as a serial interface (data), only options for configuring PRI/ISDN.
View 5 Replies View RelatedWhenever I click on "Tools," then "Internet Options" in Internet Explorer I get the following message: "This operation has been cancelled due to restrictions in effect on this computer. Please contact your systems administrator
View 1 Replies View RelatedISP has recently announced that they are going to start charging $1 for every GB that their customers go over their monthly limit. i have a 100GB/mo package and i figure that's sufficient for my habits which consist of approx 40GB of torrents, a bit of skyping, bit of browsing, etc. my ISP makes usage graphs available online, when i checked earlier last month to confirm i'm staying under my 100GB limit the graphs said over the past 12 months the highest i topped was 90GB, usually in the 70's. pretty much what i expected. but when i check their usage graphs again recently it says i've been using over 400GB for the past 3 months straight (as far back as the new graphs go). i call BS and find it very suspicious that my internet usage magically quadruples the same time my ISP wants to start charging for overusage, especially retro-active.
anyhoo, i want to somehow monitor my internet traffic usage independently but i'm not sure the best way to go about it.my home network is the typical modem -> router -> LAN.my router is a new netgear wndr3700, it has a traffic meter built in, but considering it's only forms of notification is cutting the internet off altogether or changing a green blinking LED to and orange blinking LED when the defined limit is reached, it's kinda useless. i just got it a couple months ago too, so buying a new router with better traffic monitoring isn't an option.i could put a net meter on each and every computer i have, then sum up their usage stats, but that would be a pain in the ass and wouldn't take my PS3 or WDTV media player into account, as little as they're used online.my prefered solution is to use an old laptop i hardly touch anymore and set it up as a gateway and share the internet connection or make it a proxy server. that way i could set up a net meter on just the one NIC on that to track my internet usage. modem -> laptop -> router -> LAN. the problem i have hear is forwarding ports from one NIC to the other so they can then get ditributed by the router, never tried this before, not sure how to go about it. right now it has XP home, but i can put 7 on it if that's better to work with.
I'm putting together a design for a new office with the following requirements:
10 VPN users.For Ethernet – 24 ports POE 10/100/1000
Probably go with VZ FIOS so EthernetAbout 2000 square feet so 2 WAP's should do it I'm thinking a CISCO881W-GN-A-K9 ISR with a SRW224G4P-K9-NA switch should do the trick. This will give me an integrated AP but I need a second one. Do I need to order an autonomous one or does the 881W do some sort of WLC function?
I was pondering on getting a certificate fro ma public CA to maintain easier configuration for end users. There will be a multitude of devices on this wireless network configured with 802.1x PEAP. (iPhones, iPADs, Droids, and PC's of course).
If you were to get a certificate from a public CA, I'm assuming this would be just a regular server certificate from GoDaddy, or Verisgn?
I have 2 desktops (running windows 7), a Canon MF8300 printer, and an outgoing ethernet line, all on a Netgear Advanced Cable Modem Gateway CGD24-CPR. I'm only concerned with having the 2 desktops set up with the Canon printer.Both computers have been connected to the printer before and I have the startup disk. But once the new offices were set up and both of the desktops were moved, I can no longer access or find the printer.
I can IPconfig the Desktops for their IPV4 addresses and both desktops recognize eachother on a Homegroup, but I can't find the printer. I printed off the print configuration page from the printer which gave me an IP address (printer is set for auto-obtain), but using an IP search won't bring up the printer.All of the devices are plugged into ethernet ports set up for the three different office they are in and the actual location of the Netgear cable modem/router is over 100 feet away. My primary concern is getting the printer for the desktops, but I also need to add a wireless router into one of those office in the future.
in permenantly removing the "private browsing" option in the new Mozilla FireFox internet. I use Windows Vista for home computer and obviously Mozilla FireFox for internet usage. I am not good with too many computer terms, the more basic the better. I've seen other places discuss how to remove it completely, have it not be an option, from Internet Explorer but not Mozilla. I have children in the home that I don't want to have access to it. Just easier for our situation to not have it.
View 1 Replies View RelatedHave 2 office locales. Currently have a Site to Site VPN over the public domain with 1 T-1 line on each side (different carriers). The performance is _poor_. A 2MB Excel file takes over 1 minute to open at the remote location (takes less than 10 seconds at primary location).Have approximately 20 users at the remote location (about 200 miles away); entry level firewalls; and primarily only work with MS Office files.
1) What are the differences between "Private Ethernet", "MPLS VPN", "Point to Point T-1s", and just old fashion Site to Site VPN? and is there one in particular we should focus on given we only have 2 offices?
2) Do we simply just need to increase our pipes on both sides from T-1s to 2 T-1s or a 10/10 IDE line to make our S2S VPN acceptable?
3) Is all that's really needed for P2P T-1s is to have the same carrier at both locations (this is available)? Do we still need VPN or if it's all over the same carrier it is secure?
4) If we go with Private Ethernet or Point to Point T-1s, would we then need another pipe to just get to the internet?
which option do you think is better? The idea is to use them as the core of the network,to route between several VLANs.
Options:
1 - Two 3560 with HSRP
2 - Two 3750 stacked with cross-stack etherchannel to the access switches
Currently i have my wired router connected to my modem, with three desktops connected to it. I just purchased a laptop, and would like to be able to get internet on it, my question is what are my options to get internet on my laptop [wireless] yet still keep the wired connections on the desktops as is? And if thats not an option what would be the easiest solution?My laptop has a built in built-in LAN (802.11n), built-in 10/100/1000 Mbps Ethernet LAN with RJ-45 connector for quick and easy wired Web connection.
View 1 Replies View RelatedI have a toshiba laptop and want to clear browsing history, instructions tell me to go to tools, internet option and so but unfortunately under tools I don't have internet options, can
View 1 Replies View RelatedBeen looking around in my routers settings for something that even comes close to limiting bandwidth on a specific port, or mac address, but the only thing I can find is priority settings like "Low, Normal, High, and Highest" I did however see this:
I am not 100% sure if I can specifically set bandwidth limit per port or mac address, cause I don't see an option to do that, so I presume it just limits the whole network as one...
The business i work for uses a "Do it myself" template for their website. (this is through their webhosting company). I can not add FTP to this website, we have to completely redo it with code and whatnot in order to have access to FTP. We would like users to download a template from our website (no problem) and then send us their artwork files back to us. These can be upwards of 150mb. Is there another option that i am not aware of to do this? Can't use email, has a limit of 25mb.
View 6 Replies View RelatedI Need to create more options on Cisco ACS 5.2 under internal identity store in users. How to do add, default not showing all.
View 6 Replies View RelatedI recently upgraded an ASA 5505 that has the Advanced Endpoint Assessment License to 8.4(3) and ASDM 6.4(7). Now there are no options in ASDM for adding AV, Firewall or AntiSpyware versions and definition levels etc? I have checked Host Scan Extensions and enabled 'Advanced Endpoint Assessment ver 3.5.3.1' however when I click configure and attempt to add any AV etc there are none to select - the 'Add Products' box is just blank.I have AnyConnect 3.0.5075, CSD 3.6.4021 and have tried with the integrated AnyConnect Host Scan image and with the standalone Host Scan image (3.0.5077) and the behaviour is the same ?
View 4 Replies View RelatedI Need to create more options on Cisco ACS 5.2 under internal identity store in users. How to do add, default not showing all.i have seen on internet.
View 1 Replies View RelatedI got remote offices connected to our DataCenter some via MPLS and some via VPN terminated on Cisco ASA 5510. I am running OSPF on LAN and BGP for MPLS sites. To have reachability to VPN remote offices I added 'redistribute static in OSPF' and to have rechability to sites connected via metro link i added 'redistribute connected'
View 5 Replies View RelatedI've decided I want to hard wire all my stuff in our family room; however, the modem and router are upstairs in my office. I've got a few options available and wanted to get some opinions from those who have tried any of them. Here are my three options:
1) Install NETGEAR MCAB1001 MoCA Coax-Ethernet Adapter Kits
2) Install Monster PowerNet 300 Power Line Network Modules
3) Run the Ethernet cables through the wall, under carpet, etc.
I'm primarily looking for info about the speed differences, ease of troubleshooting, etc.
I have a recent new install of Cisco Works and all is working fine. My issue is with a feature that doesn't seem to be present. When I create a report to ccheck on sys logs the report returns all sys log whether they are repetitive or not. Is there a way to have a same sys log error come back with a number of ocurences?
the feature doesn't show up when I create a custom report?
I've been given an 1841 with a 3G HWIC card installed to test with. I need to set up some sort of VPN to our ASA, the problem is though these 3G cards get a random public IP, so what options do I have to create a VPN tunnel from this router to the ASA without the 1841 getting a static public IP?
View 3 Replies View RelatedI am currently working on a lab and simulating a scenario that I will have to implement into production in the future. I am trying to setup a Guest SSID on a WLC (5508). This Guest SSID is to display the a set of Terms & Conditions, which then a user is to accept and then they move forward onto having access to the guest network.
I am familiar with performing this step using WebAuth, but it seems like the T&C are extremely long. The WebAuth page comes back with a "text exceeded limitation", on top of that I do notice that I would have to have a username and password.
Is there a feature in the WLC that would allow this scenario to work? Or will I have to build or download a customized WebAuth page?
I type it into google and it just loads normal search options. We have a Thompson Reuter. I am trying to get an open Nat type for xbox live but nothing is working right.
View 3 Replies View RelatedI was trying to work with a friend set up his wireless router. He had the Geeksquad come and set it up and I have no idea what they did. A mess of wires. I noticed that I was able to log into the imbeded browser of the modem and the router from the main PC. I didn't think it was possible to log into the modem if it was set up in bridged ethernet mode. His internet is working but I was thinking that he may have problems with double NATing.Basically, I just want to know what options there are for setting up a router to a modem. I'm aware of bridged mode and setting up the router as a switch (not real knowledgable of this one). Seems like DHCP is enabled on both devices.
View 3 Replies View Related