Remove Mozilla Private Browsing Options?
Mar 19, 2011
in permenantly removing the "private browsing" option in the new Mozilla FireFox internet. I use Windows Vista for home computer and obviously Mozilla FireFox for internet usage. I am not good with too many computer terms, the more basic the better. I've seen other places discuss how to remove it completely, have it not be an option, from Internet Explorer but not Mozilla. I have children in the home that I don't want to have access to it. Just easier for our situation to not have it.
View 1 Replies
ADVERTISEMENT
Jan 11, 2012
what is you want to enable it but have all the restriction that students do on a doe computer
View 2 Replies
View Related
Jun 13, 2012
I just installed a N1K (with code 4.2(1)SV1(4a)) and I was trying to setup a private vlan.
Example:
vlan 300
name PRI-VLAN
private-vlan primary
[Code]....
I upgraded another n1k (that already had pvlan configured) to this version of code and it has the private vlan option. This was just installed yesterday so I don't have the license on it yet.
View 4 Replies
View Related
Jan 1, 2011
I've never had a router or network in my place and I've just bought a DIR-825. I previously had a DIR-615? but returned it because I was having this problem. Now I'm still having it with the 825.When I use IE or Mozilla Firefox(preferred) I can usually navigate 2-3 pages before the program stalls and goes (Not Responding) for about 15-20 seconds before it starts going again. Then it repeats again in about another 3-4 pages or so.
I've got the times set for my router and I'm using Firmware 2.03NA-RevB
View 3 Replies
View Related
Jul 19, 2011
My computer connects to my institute LAN.They provided us a configuration according which I configured TCP/IP v4 settings and firefox settings.All the webpages open smoothly but other internet realted services apart from firefox are not working eg Skype,Windows Update,Mu Torrent etc.The LAN connection says "No Internet access"(The sites are opening nicely though) and puts a yellow exclamation marks on the LAN symbol in system tray.
View 9 Replies
View Related
Apr 22, 2011
My internet connection has suddenly turned really slow and pingtest.net tells me I have severe packet loss, which makes sense as nothing will stream or load properly. I'm running Mozilla Firefox (newest version) and have tried all the usual diagnostics and resetting everything?
View 1 Replies
View Related
May 14, 2013
I'm trying to create a new ACS 5.3 user via RESTclient (Mozilla plug-in). Which are the header and the body content to send invoking https://172.26.0.72/Rest/Identity/User/ with POST method?
View 2 Replies
View Related
Nov 16, 2011
i am having an office so i dont want people to browse during working hours from 8to4.
View 1 Replies
View Related
Jan 2, 2013
I just recently got out of school and started my first job in the IT field. I'm at a small company and part of a 2-man IT team.One of our current projects is to look into upgrading our software based firewall (ClearOS free version) for a better hardware one. I was wondering what would be some good options?Our company has around 120 users that access our network. We have one 10Mbps internet line that comes to our head office, and is then shared with our six other branches. We're hoping to just get one device we put at our head office.some of the nicer features we'd like are AD integration, usage reports by user, easy to use interface, spam-filtering, and ability to block specific applications on websites (eg, only chat on Facebook).
View 1 Replies
View Related
Mar 16, 2013
I got ADSL 2.0Mbps internet service, which it's supposed to be fast however my browsing speed is very slow, and my download speed very good and i have this problem with more than one pc and using different OS ( Windows 7 & ubuntu[linux]) so its not a virus issue or a LAN drive issue , and i tried to use different DNS but nothing change.
View 16 Replies
View Related
Jun 20, 2012
I'd like to register another account in a forum to comment anonymously so I need a different IP address for browsing.I remember that I had been trying this long time before but it was not easy to make it. Using proxy website is useless because the speed is very very slow. Is there any way to painlessly, easily change IP to browse websites?
View 4 Replies
View Related
Nov 1, 2012
I am having trouble loading pages in a browser (IE, Firefox, Chrome, makes no difference). My network is on a 101.140.228.x ip scheme because that's what the wireless network is set too and we can't change that. (It's built into the hub and the manufacturer doesn't let us change it. The computer I am having trouble with is cabled into a Netgear Access Point in client mode. The Access Point is working basically like an oversized network card to pick up the wireless network across the field with the 101.140.x.x ip.
View 3 Replies
View Related
Dec 5, 2011
I aquired an 1841 recently from work. I am trying to use it as my home router. I have set it up with the very basics (dhcp wan, dhcp pool for lan, nat). It is grabbing an address from Comcast. It works, ran speedtest and the speed looks fine at 25/3 or so.
The problem is when I am surfing the net. I'll go to a site like Youtube. It will take forever to load the site, never play the video. I have tried other sites, Autoblog, Break, etc. It seems like anything with a lot of multimedia. If I go to MSN, the first time it will take about 10 seconds to load all the pictures, after that it is instant (probably cached).
Then, if I wait a few minutes, go back to the same site, sometimes it'll be just as slow, sometimes it'll work fine. I have checked a few of the cisco logs and it doesn't show any drops or errors that I can see. If I run a constant ping to something like google.com while it is slow loading, the response time remains normal around 25ms.
I set up my other d-link home router and it works fine with all sites, same speeds from speedtest. I tried plugging a computer directly into the Cisco and same slowness issues.
View 13 Replies
View Related
Aug 6, 2012
what is DOS command to list all servers related to network we are on home network not used to connect to any work network. Yet there are many different network and local servers and services listed as active in task mgr.Do not u have to hire servers
View 7 Replies
View Related
Jun 18, 2012
After moving my PC for the 3rd over the past year ive decided that having a more wire-"less" option may be the better option as supposed my previous method of having a 10m ethernet cable from my switch to my PC. ive looked at two options, first the powerline HD (was drawn toward the belkin 1gigabit ones as i have a gigabit switch) or to remove the cable completely and using a USB wireless dongle (similar to the Edimax EW-7811UN Wireless 802.11b/g/n 150Mbps Nano USB Adaptor) . i havent had much experience with these USB wireless things as i used be put off by the compatibility and config (software stuff). i have a 3com wireless 54mbps.. PCI card but i cannot install the drivers for it on my xp 64bit machine.
View 2 Replies
View Related
Aug 14, 2011
So my router, the "Siemens Gigaset SE567", doesn't seem to want to allow me to access the router page.
Everywhere I've looked online tell me that the IP is http://192.168.1.254/ and default PW "default" and "telus". But no matter how many times I reset the router...going to http://192.168.1.254/ loads nothing.
The router SAYS Gigaset SE567 on it, and looks identical to the one in the picture...so theres no mistaking it for another router.
View 3 Replies
View Related
Jun 17, 2011
I have been using the old standard networking devices for years, 10/100 over CAT5 with Walmart off-the-shelf routers. Let's say I want to speed my network overall. I notice there are many systems and routers offering ten times that speed over wired and WiFi.I'm primarily interested in wired.
View 1 Replies
View Related
Jan 21, 2012
I brought a friend's computer home, thinking I could solve her problem but I'm at my wit's end. I cannot open Internet Explorer and Internet Options does not open from Control Panel. I followed other suggestions I found on your forum and on the net but nothing works. I cannot access the internet in any way (on that computer) and therefore cannot even supply you with a HiJack file. I tried several restore points and the only malware pgm on that computer is MalmareBytes (which found nothing). I cannot even run a anti-virus scan because that is no longer running - which is the reason I brougth her computer to my house in the first place. After several attempts of trying to open IE some times it stays open for a few seconds but most times it just flashes, then closes.
View 1 Replies
View Related
May 24, 2011
I have a 1-Port 3rd Gen Multiflex Trunk Voice/WAN Int. Card - T1/E1 in a 2901 that I want to configure for data only (T1 connection to the Internet)I don't see any options in the IOS for using this thing as a serial interface (data), only options for configuring PRI/ISDN.
View 5 Replies
View Related
Jul 5, 2012
I have an 1841 running Advanced Security IOS (12.4(25) I think, have to check when I get home) that I'm using to learn about CBAC and IOS' firewall functionality. Its external interface is connected to my Windstream DSL modem in bridge mode, and the router is doing the PPPoE authentication. It's also doing NAT for my internal network, and is acting as a firewall using CBAC inspect statements and ACLs.
Everything is working at at least a baseline level: the DSL authenticates and connects, and machines on the inside can browse the web. The problem is that browsing to some sites is slow or times out. Not all sites, just some. Latency seems to be okay when doing pings. The problem seems to happen with https connections, but again, not all of them. Gmail works fine (I have it set to always use https), while my bank and credit card sites either time out or take minutes to load.
I have an "inspect https" line in my config, and have allowed https through my outbound ACL.
I'm looking for next steps for troubleshooting this. I've check CPU utilization and it's very low; not sure what else it could be. I only have a few inspect statements, for the common stuff: tcp, udp, icmp, pop3, imap, dns, tftp, ftp, and ntp.
View 4 Replies
View Related
Feb 5, 2011
phone detects wifi asks for code then gets connected.but when i open the browser and start log on it says invalid server name
View 2 Replies
View Related
Jun 5, 2012
I am trying to troubleshoot an issue on our network that is resulting in extremely slow internet browsing. I have found out that the first request in a ping always timesout. Also, having the same issue with running a tracert. I have included some screenshots
View 7 Replies
View Related
Dec 27, 2011
About two days ago my laptop started having problems with video playback on flash websites and pixelation/off-color images on every site I go to. The videos will be playing and then suddenly will start "tiling" and glitching around wile images will either not show up, show only half of the image, show up half "normal" and half pixelated, or be completely pixelated and blocky. This only started happening just recently and has never happened before.
View 2 Replies
View Related
Dec 1, 2012
I have my computer connected to the router by ethernet, so I get maximum speeds whilst browsing and/or downloading. I bought a wireless card however, as I would like to connect my Squeezebox to the server on my computer wirelessly.My problem is, would there be a way to 'tell' the computer to use the ethernet connection for browsing, but keep the wireless online so the squeezebox can connect to it, or is this impossible?
View 1 Replies
View Related
Dec 8, 2011
i recently had a RAID Z setup on Solaris 10 (oracle) which worked fine until my motherboard gave out (computer would boot fine and work OK and then shut down ~ 20 min later). So I replaced the motherboard (ASUS E35M1-I Fusion AMD E-350 APU) but solaris would not install so I put in OPENINDIANA (build 151). I installed Samba and used my old smb.conf file (below). I can view the share from my win 7 machine, and the transfer speeds look good (I can stream an HD movie fine).The problem is that for browsing pictures every 10 pictures or so the viewer or browser stalls for 30 sec - 1 min before it is able to load the next picture. It also happens when I browse to different directories.
# Samba config file created using SWAT
# from 192.168.0.192 (192.168.0.192)
# Date: 2011/07/30 18:01:43
[global]
socket options = TCP_NODELAY SO_KEEPALIVE IPTOS_LOWDELAY
[code]....
View 1 Replies
View Related
Apr 28, 2011
[code] after installing the wirless driver, I can see my network but it can't obtain an IP. So I issue it a static IP, and it says I am connected and have internet access. But when i open up IE, doesn't work. Tried Resetting IE, and that didn't work. [code]
View 14 Replies
View Related
Jul 22, 2012
Problems on RV016 the firmware, Firmware Version : v4.2.1.02 (Jan 18 2012 14:10:55) on port PPPoE mode. It makes the dial, but not Web browsing correctly. The solution was to return the old version of firmware.
View 1 Replies
View Related
Oct 8, 2012
My computer is a inspiron 17r and is only a month old. for the last week or 2, it has been disconnecting from the internet while at home. The computer says it has an internet connection and is discoverable on the LAN, but will not connect to the internet for browsing, email or any other internet activity. I can restore the internet by rebooting the computer, or by rebooting the router and modem, or by deleting the network and re-establishing it through the network sharing center. Any of these will work, but somewhere between 1 minute and several hours, I will again lose the internet. I have several other computers and devices and none of them lose the internet so I know the router and the modem are fine. This also ONLY happens at home. I take the computer to work and connect with no problems and stay connected for 9 or 10 hours.
I have looked for answers and have tried ip release and winsock resets. these also work for a period of time but eventually fail as well.
View 3 Replies
View Related
Aug 26, 2011
Whenever I click on "Tools," then "Internet Options" in Internet Explorer I get the following message: "This operation has been cancelled due to restrictions in effect on this computer. Please contact your systems administrator
View 1 Replies
View Related
Feb 23, 2011
ISP has recently announced that they are going to start charging $1 for every GB that their customers go over their monthly limit. i have a 100GB/mo package and i figure that's sufficient for my habits which consist of approx 40GB of torrents, a bit of skyping, bit of browsing, etc. my ISP makes usage graphs available online, when i checked earlier last month to confirm i'm staying under my 100GB limit the graphs said over the past 12 months the highest i topped was 90GB, usually in the 70's. pretty much what i expected. but when i check their usage graphs again recently it says i've been using over 400GB for the past 3 months straight (as far back as the new graphs go). i call BS and find it very suspicious that my internet usage magically quadruples the same time my ISP wants to start charging for overusage, especially retro-active.
anyhoo, i want to somehow monitor my internet traffic usage independently but i'm not sure the best way to go about it.my home network is the typical modem -> router -> LAN.my router is a new netgear wndr3700, it has a traffic meter built in, but considering it's only forms of notification is cutting the internet off altogether or changing a green blinking LED to and orange blinking LED when the defined limit is reached, it's kinda useless. i just got it a couple months ago too, so buying a new router with better traffic monitoring isn't an option.i could put a net meter on each and every computer i have, then sum up their usage stats, but that would be a pain in the ass and wouldn't take my PS3 or WDTV media player into account, as little as they're used online.my prefered solution is to use an old laptop i hardly touch anymore and set it up as a gateway and share the internet connection or make it a proxy server. that way i could set up a net meter on just the one NIC on that to track my internet usage. modem -> laptop -> router -> LAN. the problem i have hear is forwarding ports from one NIC to the other so they can then get ditributed by the router, never tried this before, not sure how to go about it. right now it has XP home, but i can put 7 on it if that's better to work with.
View 6 Replies
View Related
Sep 27, 2012
I'm putting together a design for a new office with the following requirements:
10 VPN users.For Ethernet – 24 ports POE 10/100/1000
Probably go with VZ FIOS so EthernetAbout 2000 square feet so 2 WAP's should do it I'm thinking a CISCO881W-GN-A-K9 ISR with a SRW224G4P-K9-NA switch should do the trick. This will give me an integrated AP but I need a second one. Do I need to order an autonomous one or does the 881W do some sort of WLC function?
View 1 Replies
View Related
Nov 12, 2012
I was pondering on getting a certificate fro ma public CA to maintain easier configuration for end users. There will be a multitude of devices on this wireless network configured with 802.1x PEAP. (iPhones, iPADs, Droids, and PC's of course).
If you were to get a certificate from a public CA, I'm assuming this would be just a regular server certificate from GoDaddy, or Verisgn?
View 2 Replies
View Related
Jun 3, 2011
I want to block everyone from seeing each other on the LAN. So when someone goes to network neighborhood they can't see no one else on EXCEPT for the pritner or so. I want to do this using a Cisco 1841 router. How can I do this?
View 2 Replies
View Related
