My wife had a differant cell carrier before we got married and we have tried to change the caller Id thru verzion wireless and we cant seem to get any answers on how to change it. Whatcan we do.
View 2 Repliesi am using verizon fios. It's pretty fast, in fact I just did a speedtest and here is the result.But I always want more. My laptop has Intel 6300, which supports up to 450Mb. But the Actiontec MI424WR only has 54Mb. It has nice features, but it uses MoCA and connects over coaxial cables, making it unnecessarily harder to use my own router. So I searched online and found tut about how to set the actiontec as a bridge and use your own router.
1) Wouldn't that lower the speed of the router of my choice? Say if I get a 450Mb router, but I need to connect it through the port on the Actiontec, which iirc is only 100Mb. Shouldn't that mean that the new router is forced to operate at only 100Mb max?
2) What is FIOS' top speed? I'm not even sure if it can go up to 450Mb.
3)I have no problems with this Actiontec currently, the only thing I'm looking for is more speed. Has anyone tried calling Verizon and see if they could switch the connection from coax to CAT5?
I have a new Linksys E2100 that was working well with an old Verizon modem. Then recently that modem gave up the ghost and I was issued another one (Westel Model 6100G). I have no problems with internet connectivity when connecting directly from my harddrive to the Verizon modem. I am also not having trouble connecting to the Linksys routher as I am able to see my wireless connection with no problem. However, when I try to set up the connnection with the E2100 in the loop (yes, it's connected correctly) I no longer have internet access.I tried de-installing and re-installing the Linksys software (thinking maybe there was some new configuration that would be auto-detected with a new set-up), but this didn't work. I suspect that if the problem is with my Linksys router and not with my Verizon modem that there might be something that could be done to reconfigure something manually but I do not know enough about connections and wireless systems to trust myself not to mess something up.
View 1 Replies View RelatedI have a E3000 with newest firmware that has a VOIP by Velcom. It's a Grand stream HT–286.My device is working perfectly with the router. Can call and recieve calls. the caller ID (Name and number that appears is accurate). The only problem is the caller ID's time and date are always wrong.When I unplug device, it goes back to Jan 1 and time 12:00am.Any call I then get is wrong.
In the router, I've enabled SIP ALG. And the firewall is only filtering ident (port 113) and Anonymous Internet requests.The device has a hard coded internal IP (192.168.123.110). and I reserve the IP using mac filtering.The device has an administration page that is unavailable to users as it's locked by a password. On this page has an NTP server setting that the device uses to get it's time/date.I see on the information page of the device that iot's registered to a sip server.The company is saying that it's a firewall issue. I'm not too sure how to proceed.
I have two phones Cisco 7940 with firmware 8.12. Configuration:
line1_shortname "George Steel"
line1_displayname "George Steel"
line1_name: 1
line1_authname: 1
line1_password: 123
When I call to another phone as the caller's name appears GeorgeSteel (no space). With firmware 8.8 it does not do ..
I am having a problem about the caller time out.#dialer idle-timeout 180 either..So the ISDN call will be disconnect after 180 sec.However even there is traffic on the ISDN line, it will disconnect after 180 sec.For example I PING -t command to the destination IP address, it will start dialing out after I run the PING command from srouce PC, but it will disconnect after 180 sec even continue to PING.I checked the remaining time by the command #show caller timeouts.It won't reset the remaining Timer parameter. [code]
View 4 Replies View RelatedHow to hook up a seperate wireless router instead of using the fios router. I want to get a n-signal in my house. Would like an answer or a link to another thread.
View 1 Replies View RelatedI can not connect my new Mac Book Pro to Verizon wireless. I have no trouble connecting my old Mac to it, so what is the problem with the new Mac. I have to use the ethernet wire which is a problem when I am so use to wireless.
View 4 Replies View RelatedI have a wireless network at home with a wired internet connection. I want to move the network to an RV and use my Verizon 4g MIFI box as the internet connection. THe new network will have the MIFI, 2 computers one wireless printer and one wired Ethernet printer and about 6TB of NAS connected via Ethernet.
View 1 Replies View RelatedMy MiFi signal is at -117dbm and can only get dial-up. Spring rain flood the river for up to three months, so a land line is not viable.
View 1 Replies View Relatedcan't get hp printer to connect Verizon wireless router
View 1 Replies View RelatedHow can I find my wireless security key on my Verizon router
View 2 Replies View RelatedHave been using my laptop on my wireless connection for a couple of years. All of a sudden, I can't access the internet with it. My wireless icon in the corner says Wireless Network connection connected and the strength is very good. I tried to let the computer obtain the ip address and the dns automatically and have put the numbers in manually. Neither has worked. The laptop is a Toshiba Satellite running Windows XP. The router is a Verizon Wireless Actiontec Ml1424-WR.
View 14 Replies View RelatedI would like to know if I have wifi connect with my verizon internet.
View 2 Replies View RelatedSo, I bought an E4200 today. I don't know if it's v1 or 2. The box doesn't say v2, so I'm assuming it's v1.
I'm trying to set it up and I have the most recent version of the Mac OS operating system (10.8 Mountain Lion), so the setup CD is not compatible. I'm trying to do a manual set up and it seems that step 1 is to go to 192.168.1.1, which is the same IP that my FIOS router uses, so I go straight there instead of to the E4200.
Has anyone else been able to make this thing work with Mountain Lion and FIOS router?
How do I install a D-Link Wireless router, DIR 655 to the Verizon Fios internet. I have tried different ways but cant get it to work.
View 13 Replies View RelatedI had connected my WRT54G to my wireless router by disableing the DHCP on WRT54G. It worked great until recently. Now I upgraded my linksys box to the latest and greatest AC1750. Iwant to use complete features of AC1750 router. So to do this, How do I connect Verizon Model(its modem+wireless router) to this Router and have AC1750 drive everything.
View 1 Replies View RelatedI bought the Linksys E1200 for it's wireless N and the guest account. set up my new Linksys E1200 router to use for wireless N access rather that my Verizon Fios provided Actiontec (model M4124-WR Rev.C) which is only wireless G, and so that I can use the guest account. I have an ethernet cable running from one of the 4 ethernet ports on the E1200 to one of the 4 LAN ports on the Actiontec. I have the wireless turned off on the Actiontec, and have the E1200 set as 192.168.1.200.My wireless N signal seems to be working fine from the E1200, and I was able to turn on the guest account on the E1200 and "connect" to it on my iPhone 4, but then when I open Safari I can not connect to the internet.
View 9 Replies View RelatedI have verizon fios internet and a wireless home network with verizon internet security and I want to ghange my IP adress on my laptop
View 6 Replies View RelatedThe laptop identifies the Verizon-890L-B9CE as a wireless network, but will not connect. I don't know how to upgrade drivers without connecting to the internet.
View 2 Replies View RelatedI'm trying to configure my Linksys WRT54G2 router as my primary router and have my Actiontec just used for the my FIOS TV (eg VOD, widgets, guide). I've googled many HOWTO's on how to do this but I just cant get it working. So setup up will look like this in th end:
(DHCP Server)
(Wireless) (Only TV)
Internet >> WRT54G2 >>> Actiontec >>> PC/Laptops
|
FIOS TV -------------
how to set this up? I understand that the STB devices configured on my Actiontec routers is actually my TV receiver and currently configured with the following IP addresses:
IP-STB1:Connection Type: Coax
192.168.1.100
IP-STB2:Connection Type: Coax
192.168.1.101
IP-STB3:Connection Type: Coax
192.168.1.103
I have COAX Ethernet setup so everything is going through ethernet per Verizon phone tech.
Actiontec Firmware Version: 4.0.16.1.56.0.10.11.6
WRT54G2 = DDWRT firmware
I've tried the following HOWTO's to no avail.[URL]
I have a new Linksys E2100 that was working well with an old Verizon modem. Then recently that modem gave up the ghost and I was issued another one (Westel Model 6100G). I have no problems with internet connectivity when connecting directly from my harddrive to the Verizon modem. I am also not having trouble connecting to the Linksys routher as I am able to see my wireless connection with no problem. However, when I try to set up the connnection with the E2100 in the loop (yes, it's connected correctly) I no longer have internet access.
I tried de-installing and re-installing the Linksys software (thinking maybe there was some new configuration that would be auto-detected with a new set-up), but this didn't work. I suspect that if the problem is with my Linksys router and not with my Verizon modem that there might be something that could be done to reconfigure something manually but I do not know enough about connections and wireless systems to trust myself not to mess something up.
At this point I'm assuming it's a Linksys issue since I know that my Verizon modem can connect me to the internet, so works properly. Is there some known incompatibility with this Linksys model and the Westell 6100G modem?
I need a router that can receive the signal from my Verizon 4G Jetpack so that I can send signal to items that require cat5 cable.Can the WES610N do that or is there one that can?
View 1 Replies View RelatedStop wireless printer connect verizon card. I have a new wireless laptop with XP and a new HP wireless printer and a Verizon card. My printer keeps connecting through my Verizon card and it is costing me lots of $. Verizon says no way.How to I tell my new Windows XP laptop to NOT connect my printer using the Verizon card? Tried everything. Want it to connect to Ethernet.
View 2 Replies View RelatedDell Inspiron 1300, Windows XP Wireless Dell Card - trying to connect laptop to verizon wireless. message is "Wireless Nework Connection - Aquiring Network Address" but after a few minutes it tells me "cant find IP address". Next, opened Network Connections - Status - Support tab = Address Type: Invalid IP AddressNext, clicked on Details =
View 1 Replies View RelatedI have Verizon FiOs and their provided wireless router does not cover my entire house. There are plenty of dead spots throughout the house (house is 3500sq. ft.)
The FiOS comes into the basement so currently I have their router is set up in the basement. I wanted to shut off their FiOS wireless router and use my new E4200 router for wireless coverage. I am pretty sure the E4200 alone will not be able to handle my house. Most of the rooms of the house are already prewired with Ethernet cables. All those wires converge in the same closet in the basement, therefore moving the router is not an option. I was thinking of putting whichever product you experts recommend in my office which is on the 2nd floor on one side of the house. This room does have Ethernet access. However it is currently at 50-60% signal (with FiOS). My bedroom which is on the opposite side of the house is at 10-20% signal (with FiOS).
I am looking to buy something to reach all the deadspots and have WIRED LAN access (if need be in the future). What is my best option? I have researched the RE1000, the WAP610N, and even some of the other routers (E2500 or E3200) for hours. I am not an expert, and frankly after hours of reading, these technical terms of "range expanding" and "access points" are all sounding synonymous to me. I guess what I need is the range expansion on the same WiFi SSID my E4200 will provide (to cover all areas of my house), as well as an access point for connecting TVs, Xbox, or PCs in the future.
1) RE1000
2) WAP610N
3) or a router to use as an access point/range expansion combo? E2500 or E3200?
Naturally, is the range capability better for Routers or the WAP610N or RE1000?
The standard Verizon router doesn't have Wireless N capability, so I got the WRT600N (first floor) a while back and connected it to one of the ports on the Verizon router (basement). I have the wireless turned off on Verizon router. My problem is that anything connecting to the WRT600N has extremely intermittent connectivity.
View 1 Replies View RelatedI connected EA6500 internet port to actiontec router provided by Verizon fios. I don't have any other way to connect as FIOS connection is coax to actiontec modem. I must take a drop from actiontec to internet port on EA6500.
With that said, I can't get EA6500 to work, it keeps saying no internet. The only way I can get it to work is when I set it to bridge mode. This makes my EA6500 a dumb switch/access point. I didn't spend $200 for a switch. I need to use advanced features offered by this router but I can't until this problem is fixed. I made sure I am running latest version of firmware (1.1.28.146856).
I have reset my fios router as well as ea6500 to factory defaults multiple times.
I have Verizon FIOS. I am using their Actiontec router. I turned on WPA2. All is working well. I wanted to turn it off to diagnose a problem with one device. I can see no way to turn it off. To turn it on you click WPA2. you put in an 8 digit "password" etc and it works. There seems to be no way to turn it off. Am I overlooking something? I tried deleting the password. but it gives you an error and remindes you the password needs to be 8 characters.
View 3 Replies View RelatedCan I use my sprint with my Verizon plan ?
View 1 Replies View RelatedI have not internet in my area ( rural ). I currently use Hughes net ( Poor )I just bought and loaded software for a verzon modem card.How to I hook up a router to the system?
View 2 Replies View RelatedI have verizon fios 35/35 and i am told i have to run there modem/router combo for the tv ge to work properly. I have two ps3's hard wierd to the provided router, and one laptop running wirelessly. The problem is this: when the two ps3's are playing call of duty at the same time, whichever ps3 that was turned on first shows it has an open NAT type and whichever ps3 is turned on second shows a moderate NAT type (this makes them unable to play together online). I am familiar with prot forwarding but not sure if i can do this for two separate ps3's. So i hard wired a second router to the old router and ran everything out of the new one. Only now they are both a moderate NAT type. Ive played around with the UPnP settings, but dont really know what else i can do.
View 1 Replies View RelatedI have a router supplied by my ISP, Verizon[a g-router] using with 2 desktop and 2 laptop computers. All but 1 laptop are still running XP.So far I have not tried to print over the network. The printer is connected to the desktop that is also wired to the router.how to setup printing across this wireless network. Must I setup another internal home network in order to do wireless printing?
View 1 Replies View Related