Install Dlink Wireless Router / DIR 655 To Verizon Fios Internet
Jul 8, 2011How do I install a D-Link Wireless router, DIR 655 to the Verizon Fios internet. I have tried different ways but cant get it to work.
View 13 Replies
ADVERTISEMENT
Linksys Wireless Router :: Verizon FIOS Internet / TV Setup With WRT54G2?
Nov 29, 2009I'm trying to configure my Linksys WRT54G2 router as my primary router and have my Actiontec just used for the my FIOS TV (eg VOD, widgets, guide). I've googled many HOWTO's on how to do this but I just cant get it working. So setup up will look like this in th end:
(DHCP Server)
(Wireless) (Only TV)
Internet >> WRT54G2 >>> Actiontec >>> PC/Laptops
|
FIOS TV -------------
how to set this up? I understand that the STB devices configured on my Actiontec routers is actually my TV receiver and currently configured with the following IP addresses:
IP-STB1:Connection Type: Coax
192.168.1.100
IP-STB2:Connection Type: Coax
192.168.1.101
IP-STB3:Connection Type: Coax
192.168.1.103
I have COAX Ethernet setup so everything is going through ethernet per Verizon phone tech.
Actiontec Firmware Version: 4.0.16.1.56.0.10.11.6
WRT54G2 = DDWRT firmware
I've tried the following HOWTO's to no avail.[URL]
Linksys Wireless Router :: EA6500 No Internet Connected To Verizon FIOS Actiontec Router
Jan 20, 2013I connected EA6500 internet port to actiontec router provided by Verizon fios. I don't have any other way to connect as FIOS connection is coax to actiontec modem. I must take a drop from actiontec to internet port on EA6500.
With that said, I can't get EA6500 to work, it keeps saying no internet. The only way I can get it to work is when I set it to bridge mode. This makes my EA6500 a dumb switch/access point. I didn't spend $200 for a switch. I need to use advanced features offered by this router but I can't until this problem is fixed. I made sure I am running latest version of firmware (1.1.28.146856).
I have reset my fios router as well as ea6500 to factory defaults multiple times.
Add A Wireless Router To Verizon Fios?
Feb 20, 2013How to hook up a seperate wireless router instead of using the fios router. I want to get a n-signal in my house. Would like an answer or a link to another thread.
View 1 Replies View RelatedLinksys Wireless Router :: Can't Set Up New E4200 With Verizon FIOS
Dec 13, 2012So, I bought an E4200 today. I don't know if it's v1 or 2. The box doesn't say v2, so I'm assuming it's v1.
I'm trying to set it up and I have the most recent version of the Mac OS operating system (10.8 Mountain Lion), so the setup CD is not compatible. I'm trying to do a manual set up and it seems that step 1 is to go to 192.168.1.1, which is the same IP that my FIOS router uses, so I go straight there instead of to the E4200.
Has anyone else been able to make this thing work with Mountain Lion and FIOS router?
Linksys Wireless Router :: E1200 With Verizon Fios Actiontec?
Feb 8, 2012I bought the Linksys E1200 for it's wireless N and the guest account. set up my new Linksys E1200 router to use for wireless N access rather that my Verizon Fios provided Actiontec (model M4124-WR Rev.C) which is only wireless G, and so that I can use the guest account. I have an ethernet cable running from one of the 4 ethernet ports on the E1200 to one of the 4 LAN ports on the Actiontec. I have the wireless turned off on the Actiontec, and have the E1200 set as 192.168.1.200.My wireless N signal seems to be working fine from the E1200, and I was able to turn on the guest account on the E1200 and "connect" to it on my iPhone 4, but then when I open Safari I can not connect to the internet.
View 9 Replies View RelatedUsing Linksys Instead Of Verizon Fios Router?
Apr 11, 2012I tried connecting this on my own and it worked for hard wired Internet service but not for wireless service. Too many cables and boxes attached. I have a vz router, then some other box, and a battery back up.
View 2 Replies View RelatedAdding Second Wifi Router To Verizon Fios Mi424wr
Oct 23, 2012I have a MI424WR for my Verizon Fios connection. The router is located downstairs, and I don't get Wifi in my bedroom upstairs. Is it possible to connect another WIFI router by ethernet to the MI424WR? Is there anyway where I can do it without the two router's wifi signals fighting each other? Is there a specific kind of router I should be looking for?
View 1 Replies View RelatedM1424-WR - Setting Up Repeater With Verizon FiOS Router?
Jan 7, 2012Set up a repeater for their house to get a better signal in locations farther from their main router that is a Verizon Actiontec M1424-WR Rev. C. I am recommending that he get an old router (Linksys wrt54GL or E2000) that I can convert into a repeater with DDWRT firmware as a cheap solution, or with a purpose built Netgear or Linksys range extender repeater as a more $ solution.
View 4 Replies View RelatedLinksys Wired Router :: RV042 GW To GW VPN Using Verizon FIOS
Aug 18, 2011I have never setup a GW to GW VPN with a FIOS connection. I have done it with DSL and cable without any problems.
View 1 Replies View RelatedD-Link DAP-1522 :: Can't Connect To Verizon Fios Router
Jan 25, 2011Can't connect DAP-1522 to my Verizon Fios Router
Went through the setup on the DAP-1522. Selected my Verizon FIOS wireless network and entered the WEP key. Everything looks ok on the status page - except Status: Disconnected
Reset/restarted and reconfigured DAP-1522 several times - same result. Can't get it to connect.
6300 Verizon FIOS Change To Other Wireless Routers?
Jul 3, 2011i am using verizon fios. It's pretty fast, in fact I just did a speedtest and here is the result.But I always want more. My laptop has Intel 6300, which supports up to 450Mb. But the Actiontec MI424WR only has 54Mb. It has nice features, but it uses MoCA and connects over coaxial cables, making it unnecessarily harder to use my own router. So I searched online and found tut about how to set the actiontec as a bridge and use your own router.
1) Wouldn't that lower the speed of the router of my choice? Say if I get a 450Mb router, but I need to connect it through the port on the Actiontec, which iirc is only 100Mb. Shouldn't that mean that the new router is forced to operate at only 100Mb max?
2) What is FIOS' top speed? I'm not even sure if it can go up to 450Mb.
3)I have no problems with this Actiontec currently, the only thing I'm looking for is more speed. Has anyone tried calling Verizon and see if they could switch the connection from coax to CAT5?
Dlink Wireless Router DIR655 / Cannot Connect To Internet With New XP Media Center Install
Mar 19, 2011getting my computer connected to the internet.I have a fresh install of XP Media Center Edition with SP2. I don't really have anything else installed as I wanted to make sure my internet connection was working to get updates. My computer is a Dell XPS720 desktop I have a DSL connection with [URL] and a Dlink Wireless Router DIR655.I have two portable computers that are on the local network with wireless connections and they are working o.k.On my desktop at the command prompt; I cannot "ping" anything and "ipconfig /all" returns nothing at all.
View 3 Replies View RelatedLinksys Access Point :: E2500 Or E3200 - Best Option To Set Up Wireless With Verizon FiOS?
Dec 7, 2011I have Verizon FiOs and their provided wireless router does not cover my entire house. There are plenty of dead spots throughout the house (house is 3500sq. ft.)
The FiOS comes into the basement so currently I have their router is set up in the basement. I wanted to shut off their FiOS wireless router and use my new E4200 router for wireless coverage. I am pretty sure the E4200 alone will not be able to handle my house. Most of the rooms of the house are already prewired with Ethernet cables. All those wires converge in the same closet in the basement, therefore moving the router is not an option. I was thinking of putting whichever product you experts recommend in my office which is on the 2nd floor on one side of the house. This room does have Ethernet access. However it is currently at 50-60% signal (with FiOS). My bedroom which is on the opposite side of the house is at 10-20% signal (with FiOS).
I am looking to buy something to reach all the deadspots and have WIRED LAN access (if need be in the future). What is my best option? I have researched the RE1000, the WAP610N, and even some of the other routers (E2500 or E3200) for hours. I am not an expert, and frankly after hours of reading, these technical terms of "range expanding" and "access points" are all sounding synonymous to me. I guess what I need is the range expansion on the same WiFi SSID my E4200 will provide (to cover all areas of my house), as well as an access point for connecting TVs, Xbox, or PCs in the future.
1) RE1000
2) WAP610N
3) or a router to use as an access point/range expansion combo? E2500 or E3200?
Naturally, is the range capability better for Routers or the WAP610N or RE1000?
How To Turn Off WPA On Verizon FIOS
Jan 11, 2011I have Verizon FIOS. I am using their Actiontec router. I turned on WPA2. All is working well. I wanted to turn it off to diagnose a problem with one device. I can see no way to turn it off. To turn it on you click WPA2. you put in an 8 digit "password" etc and it works. There seems to be no way to turn it off. Am I overlooking something? I tried deleting the password. but it gives you an error and remindes you the password needs to be 8 characters.
View 3 Replies View RelatedVerizon FIOS Modem - Default Gateway Is Not Available?
Feb 13, 2012For some reason, whenever I go home (I'm in college right now), my internet goes haywire. It'll connect for about an hour or so when I first load it up, but after that, it refuses to connect at all. If I restart my modem (verizon fios modem), then it'll connect for about 5 minutesIf I run the troubleshooter, sometimes it doesn't detect anything wrong with it, and other times, it says "the default gateway is not available"[CODE]
View 1 Replies View RelatedCisco Routers :: Setting Up RV180 With Verizon FiOS?
Jun 7, 2012Looking for setting up the RV180 behind the ActionTec MI424WR-GEN2. At the same time I want to be able to VPN into the network and be able to access objects.
Ideal setup:
Verizon ActionTec modem is primary network (192.168.1.x)
RV180 is secondary network (192.168.2.x)
VPN to 192.168.2.x network from remote locations (client-to-gateway)
I've tried asking from Cisco Support and was given the "we don't suppor that configuration" line. They want me to put it in front of the ActionTec FiOS modem/router in which case then Verizon will provide zero support for anything.Now, to add an extra twist, I do have STBs (Set-Top Boxes) connected to the Verizon FiOS modem/router but nothing special (i.e. no DVR or any stuff like that). How to get this thing up and running so that I can have remote folks VPN into the network? We work with data that needs to remain encrypted during transmission, hence the VPN.I have forwarded ports 443 (TCP), 60443 (TCP), 500 (UDP) and 4500 (UDP) to the WAN IP of the RV180. Network objects behind the RV180 cannot get past the router (it's in router, not gateway mode). The RV180 can ping objects both on the WAN and LAN side, so it seems that the RV180 is the problem child.
Cisco Firewall :: ASA 5505 With Verizon Home Fios Service?
Feb 13, 2013connecting ASA 5505 with the Action Tech Router?
View 1 Replies View RelatedLinksys Wireless Router :: E1200 Fails To Connect To Frontier FIOS Internet?
Jan 3, 2012I am trying to set up my E1200 router to Frontier FIOS internet. I went thru the setup and it failed to connect to the internet. What settings do I need? Frontier says that it should find the connection automatically.
View 1 Replies View RelatedHome Network :: Cannot Reach Internet With FIOS Router From Bridged RemotePC
Dec 20, 2012I am trying to setup a remote PC over a wireless access Point/Bridge to our FIOS router. Pic of setup is shown below. Everything is connected, there are no errors or security warnings shown in the ActionTec MI424 router. The RemotePC IP shows up as an Active Ethernet client in the Router config app. Moreover, I can run the connectivity test from the router app to the RemotePC and it passes that, and I can PING from the RemotePC to the Router. Yet I cannot reach the Internet from a Browser on the RemotePC (192.168.1.75). I am using (2) DLINK DAP-1522 Access Point/Bridge units and they have worked as expected. I set the Router log to list any blocked IP traffic as well, and it does not show anything being blocked from the RemotePC (192.168.1.75). So why can't I reach the Internet from the RemotePC? Seems like a gateway problem or I need to make some config changes in the Router.
View 2 Replies View RelatedDLink 2680 Wireless Router - Can Connect But No Internet
Feb 23, 2013Its a Toshiba laptop and she has a d-link 2680 wireless router. The laptop will successfully connect to the internet through an ethernet cable, and will connect to the wireless network fine but when wireless i cannot access the internet. I have an iphone which connects to the wireless network and accesses the web perfectly.I have tried everything I can think of and find online to try and talktalk tech support won't assist as its a hardware setup issue.
Windows IP Configuration
Host Name . . . . . . . . . . . . : Barbara-laptop
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Unknown
IP Routing Enabled. . . . . . . . : No
[code]...
Internet Via Verizon MIFI4510L To Netgear WNR3500 V2 Router
Nov 28, 2011I need to make this connection to be able to operate a Enphase Solar electricity inverter reporting system.
View 1 Replies View RelatedInternet Via Verizon MIFI4510L To Netgear WNDR3700 Router?
Oct 26, 2011I use both Gigabit LAN and "N" class WIFI through my WNDR3700 to connect to my Network. Can I use a Verizon MIFI4510L to connect to the Internet?
View 1 Replies View RelatedVerizon Ml1424-WRL - Connected To Wireless But Cannot Access Internet
Nov 13, 2011Have been using my laptop on my wireless connection for a couple of years. All of a sudden, I can't access the internet with it. My wireless icon in the corner says Wireless Network connection connected and the strength is very good. I tried to let the computer obtain the ip address and the dns automatically and have put the numbers in manually. Neither has worked. The laptop is a Toshiba Satellite running Windows XP. The router is a Verizon Wireless Actiontec Ml1424-WR.
View 14 Replies View RelatedWireless Setup - Connecting Wifi With Verizon Internet?
Sep 20, 2012I would like to know if I have wifi connect with my verizon internet.
View 2 Replies View RelatedLinksys Wireless Router :: Setup E1200 For FIOS?
Sep 19, 2012My macbook is able to detect my router, but the router cannot connect to the internet. I was wondering if the E1200 requires a modem, where as FIOS only offers ONT?
View 1 Replies View RelatedWireless Home Network With Verizon Internet Security - Changing IP Address?
Dec 24, 2011I have verizon fios internet and a wireless home network with verizon internet security and I want to ghange my IP adress on my laptop
View 6 Replies View RelatedLinksys Wireless Router :: E4200 Replacing Gigabit FIOS Router?
Feb 3, 2013I have that red gigabit router with the 150/65 service. It connects via ethernet for internet and has a coax to transmit the guide data etc.So my idea was to just leave the Verizon router connected and on (with wi-fi off) so it could do the TV stuff and just plug my router into the ethernet wall port the Verizon guy installed.Not so easy of course, my E4200 will not recognize the ethernet from my ONT (I think that's what the device they put in my basement is called) and the internet doesn't work. I have factory reset the router.The reason I am doing all this is because the wireless range of the e4200 at 2.4ghz is near unmatched and given my house, the actiontech cannot reach my room.
View 9 Replies View RelatedLinksys Wireless Router :: EA2700 - Configuring FiOS As Bridge?
Sep 11, 2012I recently bought an EA2700 in hopes that it will make my connection faster, stronger signal and stable. However, this is not the case. The connections keeps dropping and the range is the same as my Verizon-FiOS router. Anyway, I'm hoping that a fix be distributed to address this issue. I can't return my router to the vendor anymore.
Now, since I have two routers, I want to be able to leverage EA2700's dual-band feature and the Guest-access feature but I can't make this as a main router since my FiOS router should still be able to supply IP addresses to my cable boxes, thus, I can't configure it as a Bridge. I'm thinking if I just split the IP distribution as follows:
FiOS router: 192.168.1.2-110
EA2700: 192.168.1.111-150
Linksys Wireless Router :: WRT54G FIOS And Actiontec Modem
Dec 29, 2006Just had Verizon FIOS service installed. It comes with an actiontec modem. I would like to remove the actiontec modem and connect directly to my Linksys RT31P2 which is cascaded to my Linksys WRT54G. I have tried just about every router setup config; all with no success. How to be able to connect the FIOS directly to a linksys router.
View 3 Replies View RelatedLinksys Wireless Router :: E2500 Getting Slow Throughput With FIOS Quantum
Aug 14, 2012I've just upgraded to FIOS quantum service. (50 MB down, 25 up). I have a Linksys 2500 connected to the FIOS router. The FIOS (ActionTec) router provides the full advertised speeds with any speed test service I try. But with the 2500 connected to the FIOS router I get download speeds about 3MB. The MTU on the linksys is 1500. It's connected correctly and is running it's own DHCP server. (Why am I doing this? I try to avoid the ActionTec routers, they have broken many services in the past.)The 2500 firmware is up to date. I've tested on the wireless and wired (ethernet) interfaces.
View 2 Replies View RelatedDlink Dir 615 Router Not Connecting To Internet
May 16, 2012i ahve a dlink dir 615 B2 router and it wont connect to the internet. on day it was fine and working, the next day the internet led wouldn't change from the red light to the green light.i have tried resetting it about 60 times, while the laptop was on/off, while it was plugged it, while it was without power, while the internet cable was in, while it wasn't, while it was shut down and i reset it and the i pluged it in while resetting it...i dont know what else to do!! short of smashing the bejesus out of it. The internet works fine when i connect the cable directly to the laptop, I don;t have a cable modem or anything, just a plain old cable from the street to my house.
View 3 Replies View RelatedDlink Router DIR-615 Keeps Disconnecting From The Internet?
Jun 3, 2011This keeps happening, the router keeps disconnecting from the internet every 5 seconds. What can be going on? I have already logged into the dlink admin and changed the RTS Threshold to 2304. After that, it worked for a couple of days, and now its back to disconnecting again. What can be wrong? If you need any additional info. just let me know.
NOTE: I have already checked for the firmware update, and it appears to be up to date.