Linksys Wireless Router :: Setup E1200 For FIOS?
Sep 19, 2012My macbook is able to detect my router, but the router cannot connect to the internet. I was wondering if the E1200 requires a modem, where as FIOS only offers ONT?
View 1 Replies
ADVERTISEMENT
Linksys Wireless Router :: E1200 With Verizon Fios Actiontec?
Feb 8, 2012I bought the Linksys E1200 for it's wireless N and the guest account. set up my new Linksys E1200 router to use for wireless N access rather that my Verizon Fios provided Actiontec (model M4124-WR Rev.C) which is only wireless G, and so that I can use the guest account. I have an ethernet cable running from one of the 4 ethernet ports on the E1200 to one of the 4 LAN ports on the Actiontec. I have the wireless turned off on the Actiontec, and have the E1200 set as 192.168.1.200.My wireless N signal seems to be working fine from the E1200, and I was able to turn on the guest account on the E1200 and "connect" to it on my iPhone 4, but then when I open Safari I can not connect to the internet.
View 9 Replies View RelatedLinksys Wireless Router :: E1200 Fails To Connect To Frontier FIOS Internet?
Jan 3, 2012I am trying to set up my E1200 router to Frontier FIOS internet. I went thru the setup and it failed to connect to the internet. What settings do I need? Frontier says that it should find the connection automatically.
View 1 Replies View RelatedLinksys Wireless Router :: Verizon FIOS Internet / TV Setup With WRT54G2?
Nov 29, 2009I'm trying to configure my Linksys WRT54G2 router as my primary router and have my Actiontec just used for the my FIOS TV (eg VOD, widgets, guide). I've googled many HOWTO's on how to do this but I just cant get it working. So setup up will look like this in th end:
(DHCP Server)
(Wireless) (Only TV)
Internet >> WRT54G2 >>> Actiontec >>> PC/Laptops
|
FIOS TV -------------
how to set this up? I understand that the STB devices configured on my Actiontec routers is actually my TV receiver and currently configured with the following IP addresses:
IP-STB1:Connection Type: Coax
192.168.1.100
IP-STB2:Connection Type: Coax
192.168.1.101
IP-STB3:Connection Type: Coax
192.168.1.103
I have COAX Ethernet setup so everything is going through ethernet per Verizon phone tech.
Actiontec Firmware Version: 4.0.16.1.56.0.10.11.6
WRT54G2 = DDWRT firmware
I've tried the following HOWTO's to no avail.[URL]
Linksys Wireless-n E1200 New Router Setup Failure
Jan 19, 2012I have been attempting to set up a linksys wireless-n e1200 router on my hp p6-2007c (Windows 7 SP1, 64-bit) desktop pc for the last day and have exhausted everything i can think of. The previous router was a linksys WRT54G and it worked fine. However, upon setting up this new router i get a "no internet access" message accompanied by the little yellow triangle and the ability to still connect to my router via its ip address to alter its configuration. The connection status for the network and the internet is identical for all the laptops in my house. I originally attempted setting up the router using Cisco's setup program. At its conclusion, the setup program informs me that i am connected to the router, but my internet connection has been lost (even though it was never there) I have tried starting over from scratch by resetting the router back to its default settings and using a variety of different channels (Auto, 1, 6, and 11), frequencies, etc. I have uninstalled norton antivirus, disarmed the windows security programs, made sure of TCP/IP settings, rolled back, uninstalled, and finally updated firmware, uninstalled/reinstalled driver for wireless card, disabled/enabled the card itself, deleted all other previous network profiles still present in the "Manage Wireless Networks" screen, and probably some other suggestions i came across in this forum. They all failed with the same results, i.e. the ability to connect to the network locally and having no internet access.
View 1 Replies View RelatedLinksys Wireless Router :: E1200 Setup Without Internet?
Jan 3, 2013I wish to have a home network using the E1200 without an internet connection. I have a netbook (Lenovo S100) and a Samsung Galaxy Note II. I want to be able to have both connected to the router so I can interface the two devices using a program such as Teamviewer.
View 1 Replies View RelatedLinksys Wireless Router :: E1200 - ISP Connection Setup?
Jan 20, 2013I have E1200 router and I have a problem with setup my ISP Connection. The ISP requires PPPOE connection but with static IP Address but in E1200 I didn't find any option for that. The possible ways are PPPOE or Static IP Address.
View 1 Replies View RelatedLinksys Wireless Router :: E1200 Setup On Pre-Intel Mac
Apr 4, 2012Im running a pre intel mac g5 with 10.5.8 on it and when i insert my setup disc for my new e1200 router there is a slash through the start up icon and then i get a message that its not supported by my architechure. Is my computer to old to set up this router???
View 2 Replies View RelatedLinksys Wireless Router :: How To Setup Remote Management On A E1200
Aug 25, 2012I want to be able to login to a router remotely and foward a port on the router. I thought i saw a spot for remote management but don't know how to use it. I have a dyn account and can create a dns for it.
i setup security dvrs on the internet so clients can see cameras from outside their homes. I would like to be able to login to a router if i need to foward a port or something similar.
Linksys Wireless Router :: Cannot Access E1200 Setup Page
Nov 29, 2012I'm able to connect to the internet through my E1200 router but I cannot access the router set up page. 192.168.1.1 doesn't work... I can connect to it just fine with my laptop however... so I changed it to 192.168.254.1 as per some internet instructions. Still can't connect via my desktop... Tried ipconfig /flushdns to no avail. Cleared the internet cache Upgraded the firmware (via the laptop) rebooted the computer rebooted the router... reset the router... After rebooting the router I can type in the username and password to access the router, but it never connects....
View 6 Replies View RelatedLinksys Wireless Router :: E1200 Can't Setup MAC Address Filtering
Sep 12, 2011The browser-based settings utility for my E1200 can't setup MAC address filtering. I go to the "Wireless MAC Filter" page and enable MAC filtering.When I click the “wireless client list” button, a new window opens saying “IE cannot display the webpage”. This always happens when I have a wireless connection active.When there are no active connections, then IE properly displays the MAC address table, but it is empty since there aren't any computers connected to the router.
View 5 Replies View RelatedLinksys Wireless Router :: E1200 Management Mode And Faulty Setup
Aug 5, 2012I can not even get in to management mode. In next program that just keeps trying to auto repair the connection and never displays any radio button option the direction state like "advanced settings".At the very least your PDF should match your user friendly **bleep** ware!The instructions even refer to itself wrong! It states "for manual set up go use browser connection section" then in that section it describes an auto set up and instructs you to follow the set up steps on the CD.
View 7 Replies View RelatedCisco Switches :: SG300-10 / Setup Multiple Routed VLANs Going Back To FiOS Actiontec Router
Aug 13, 2011I just received a new Cisco SG300-10 and am configuring it in Layer 3 mode. I am trying to setup multiple routed VLANs going back to a FiOS Actiontec router. My configuration is as follows.
Fios Router: 192.168.1.1
Assigning DHCP 192.168.1.2 through 100.
SG300-10 has VLan 1 ip 192.168.1.5 used for Mgmt.
VLAN2 is 10.0.2.1
VLAN3 is 10.0.3.1.
I have a static route set on the fios router for both subnets setup as follows.
Destination 10.0.3.0 Gateway 192.168.1.5 Netmask 255.255.255.0 Metric 1
Destination 10.0.2.0 Gateway 192.168.1.5 Netmask 255.255.255.0 Metric 1
I have a laptop connected to Gi8 on the Cisco (Vlan 3) and statically assigned 10.0.3.3, with a gateway of 10.0.3.1. DNS set to the fios router (192.168.1.1).
Everything pretty much works EXCEPT, I cannot get out to the internet from either vlan. Traffic routes between vlans/and the default subnet on the fios without issue.
When I ping out, DNS resolves, but will not go past the fios router. Am I missing a setting somewhere?
Linksys Wireless Router :: Can't Set Up New E4200 With Verizon FIOS
Dec 13, 2012So, I bought an E4200 today. I don't know if it's v1 or 2. The box doesn't say v2, so I'm assuming it's v1.
I'm trying to set it up and I have the most recent version of the Mac OS operating system (10.8 Mountain Lion), so the setup CD is not compatible. I'm trying to do a manual set up and it seems that step 1 is to go to 192.168.1.1, which is the same IP that my FIOS router uses, so I go straight there instead of to the E4200.
Has anyone else been able to make this thing work with Mountain Lion and FIOS router?
Linksys Wireless Router :: EA2700 - Configuring FiOS As Bridge?
Sep 11, 2012I recently bought an EA2700 in hopes that it will make my connection faster, stronger signal and stable. However, this is not the case. The connections keeps dropping and the range is the same as my Verizon-FiOS router. Anyway, I'm hoping that a fix be distributed to address this issue. I can't return my router to the vendor anymore.
Now, since I have two routers, I want to be able to leverage EA2700's dual-band feature and the Guest-access feature but I can't make this as a main router since my FiOS router should still be able to supply IP addresses to my cable boxes, thus, I can't configure it as a Bridge. I'm thinking if I just split the IP distribution as follows:
FiOS router: 192.168.1.2-110
EA2700: 192.168.1.111-150
Linksys Wireless Router :: WRT54G FIOS And Actiontec Modem
Dec 29, 2006Just had Verizon FIOS service installed. It comes with an actiontec modem. I would like to remove the actiontec modem and connect directly to my Linksys RT31P2 which is cascaded to my Linksys WRT54G. I have tried just about every router setup config; all with no success. How to be able to connect the FIOS directly to a linksys router.
View 3 Replies View RelatedLinksys Wireless Router :: E2500 Getting Slow Throughput With FIOS Quantum
Aug 14, 2012I've just upgraded to FIOS quantum service. (50 MB down, 25 up). I have a Linksys 2500 connected to the FIOS router. The FIOS (ActionTec) router provides the full advertised speeds with any speed test service I try. But with the 2500 connected to the FIOS router I get download speeds about 3MB. The MTU on the linksys is 1500. It's connected correctly and is running it's own DHCP server. (Why am I doing this? I try to avoid the ActionTec routers, they have broken many services in the past.)The 2500 firmware is up to date. I've tested on the wireless and wired (ethernet) interfaces.
View 2 Replies View RelatedLinksys Wireless Router :: E4200 Replacing Gigabit FIOS Router?
Feb 3, 2013I have that red gigabit router with the 150/65 service. It connects via ethernet for internet and has a coax to transmit the guide data etc.So my idea was to just leave the Verizon router connected and on (with wi-fi off) so it could do the TV stuff and just plug my router into the ethernet wall port the Verizon guy installed.Not so easy of course, my E4200 will not recognize the ethernet from my ONT (I think that's what the device they put in my basement is called) and the internet doesn't work. I have factory reset the router.The reason I am doing all this is because the wireless range of the e4200 at 2.4ghz is near unmatched and given my house, the actiontech cannot reach my room.
View 9 Replies View RelatedLinksys Wireless Router :: EA6500 No Internet Connected To Verizon FIOS Actiontec Router
Jan 20, 2013I connected EA6500 internet port to actiontec router provided by Verizon fios. I don't have any other way to connect as FIOS connection is coax to actiontec modem. I must take a drop from actiontec to internet port on EA6500.
With that said, I can't get EA6500 to work, it keeps saying no internet. The only way I can get it to work is when I set it to bridge mode. This makes my EA6500 a dumb switch/access point. I didn't spend $200 for a switch. I need to use advanced features offered by this router but I can't until this problem is fixed. I made sure I am running latest version of firmware (1.1.28.146856).
I have reset my fios router as well as ea6500 to factory defaults multiple times.
Using Linksys Instead Of Verizon Fios Router?
Apr 11, 2012I tried connecting this on my own and it worked for hard wired Internet service but not for wireless service. Too many cables and boxes attached. I have a vz router, then some other box, and a battery back up.
View 2 Replies View RelatedLinksys Wired Router :: RV042 GW To GW VPN Using Verizon FIOS
Aug 18, 2011I have never setup a GW to GW VPN with a FIOS connection. I have done it with DSL and cable without any problems.
View 1 Replies View RelatedLinksys Wireless Router :: How To Get Best Speeds Possible For E1200
Dec 22, 2012I have 3 Wireless Devices connected to my Router which is a Ipad, Ipod Touch & laptop.I have 2 hard Wired conneted to my Router which is a ps3 and a Desktop. How can i have great speeds and reliable connection on all of them.
View 9 Replies View RelatedLinksys Wireless Router :: E1200 - Cannot Open NAT?
Jun 5, 2012I have opened my NAT for xbox using Port Triggering , but I cannot open my NAT for the PC because it uses no ports!I cannot host a match using any MMO game , and I cannot host any MW3/Black Ops matches too!
View 7 Replies View RelatedLinksys Wireless Router :: E1200 Won't Connect With Key?
Aug 12, 2012Setting up new E1200 wireless router. Used the CD to setup network. It set up two networks: 1 secured and one unsecured guest network. Ican connect wirelessly to guest network no problem but it will not connect to the secured network using the correct security key (password).
View 9 Replies View RelatedLinksys Wireless Router :: Connection From Outside To E1200?
May 1, 2013I purchased E1200 and have a problem. I have static external IP but router configured to get IP automatically (reservation from ISP). When some one at home using internet I can commetc to the router using remote management. But when everybody out and no internet users at home I cannot connect to the router. I checked with other router from linksys (old one WAG45G or something like this) and it was the same. But it works great whith TP-Link routers.
View 4 Replies View RelatedLinksys Wireless Router :: E1200 - Cannot Get It To Connect To TV
Nov 7, 2011I have a Panasonic Visio tv, I have a LINKsys E1200 that is connected to my Cable Internet. I have successfully connected the wireless to my laptop and have a guest network that has been tested and works as well. I bought a Sharp Blu Ray player that has wireless capability connected to the TV with HDMI cable and the LAN adapter is in the player. When I had the Blu Ray downstairs I had it connected to the LINKsys thru an ethernet cable and didn't use the adapter, but I wanted to take it upstairs and use it on that TV. CANNOT establish an internet connection?
View 2 Replies View RelatedLinksys Wireless Router :: Possible To Use E1200 As Repeater
Jan 4, 2012Is it possible to use a Linksys E1200 as a repeater? If so, how do I set it up?
View 3 Replies View RelatedLinksys Wireless Router :: E1200 - Set It Up With Tablet?
Oct 23, 2012Bought a new Samsung tablet and a Cisco wi fi router. But I don't have the CD drive to activate the wi fi router. I am using the Cisco linksys E1200.
View 1 Replies View RelatedLinksys Wireless Router :: Can't See Where To Set A User Name On E1200
Dec 29, 2011I can't see where to set a user name on my E1200. I set a password for the web interface then it boots me out and I am promted for the password and username.I don't want to download and configure my router with some poorly written software for my mac; why can't I just do it all through the good old web interface???? I'm able to set everything else up fine but when i set the password I am basically rendering the web interface usless and have to reset the router!! (running Lion, latest build with 8gigs of ram and N wirless adaptor in lappy)
Ok, so I was given this router for free so I shouldn't complain but I do not see any speed increase over my 6 year old 54G rinning wrt, perhaps I need summin better than this $50 walmart special Getting about 10mps download which is also the theoretical max of G right)
Linksys Wireless Router :: Locked Out Of Own E1200
Jun 9, 2012I set my router to allow my xbox360's mac address, not knowing that it would kick out all of my other devices. So now I can't access my own router and I need to reset it. How do I do that?E1200 series linksys router. I'm looking for an ethernet cable and my installation disk right now to see if I can connect with the cable and maybe use something on the disk if I have to.
View 1 Replies View RelatedLinksys Wireless Router :: E1200 - How To Connect With PC
Dec 26, 2012I replaced my broken modem with a new Motorola 3360 as recommended by my ISP. The new modem works fine connected directly to my PC. When connecting the modem to the Cisco E1200 router, the same one I had with the older modem, the E1200 says I'm not connected to the PC. I've triple checked the wired connections from the modem to the router and then to the PC. I've swapped out cables and verified that they all work when used directly from the modem to the PC. I'm thinking some settings from the old Westell modem are messing with the connectivity of the new E1200 router.
View 2 Replies View RelatedLinksys Wireless Router :: E1200 Wi-Fi Does Not Work
Apr 16, 2013my wifi router is E1200 at first it works very fine but then when the time you unplugged it and turn it on again it won't work already i mean its working the lights are on and blinking but there's no wifi... why does it happen??? i don't understand...i have already did the 30-30-30 rule the hard reset thin but still nothing's change...
View 5 Replies View RelatedLinksys Wireless Router :: Firmware For E1200 V2
Dec 29, 2012i'm having connection issues requiring frequent reboots of my router. it starts with internet slowdown to a crawl, then it times out and lastly the webinterface is not even responding when i try to access it to reboot. Requiring me to manually unplug. this happens once a day atleast.
Sometimes it recovers after a few minutes and get on the net.i've tried flashing, reflashing, re-reflashing , resetting , re-resetting, to no end. And all the usual tricks tech support ask to do.
i didn't use to have this problem before the firmware update
08/31/2012
Ver.2.0.04 (Build 1)
i would just like to flash to the previousl version and test if this still happens.