Home Network :: Cannot Reach Internet With FIOS Router From Bridged RemotePC

Dec 20, 2012

I am trying to setup a remote PC over a wireless access Point/Bridge to our FIOS router. Pic of setup is shown below. Everything is connected, there are no errors or security warnings shown in the ActionTec MI424 router. The RemotePC IP shows up as an Active Ethernet client in the Router config app. Moreover, I can run the connectivity test from the router app to the RemotePC and it passes that, and I can PING from the RemotePC to the Router. Yet I cannot reach the Internet from a Browser on the RemotePC (192.168.1.75). I am using (2) DLINK DAP-1522 Access Point/Bridge units and they have worked as expected. I set the Router log to list any blocked IP traffic as well, and it does not show anything being blocked from the RemotePC (192.168.1.75). So why can't I reach the Internet from the RemotePC? Seems like a gateway problem or I need to make some config changes in the Router.

View 2 Replies


ADVERTISEMENT

Home Network :: Need To Extend Reach Of Wifi Network At Home

Oct 20, 2011

Here's the layout: Cable modem in the basement. Several devices in which I'd prefer a wired connection in the basement. Upstairs on the 1st and 2nd floor of the house are many devices in which wifi is fine or preferred.Here's the problem: As you might guess, wifi is weak upstairs and certainly on the patio and 2nd floor. I have an access point upstairs that I've experimented with but it is flaky.

View 1 Replies View Related

Cisco Firewall :: ASA 5505 With Verizon Home Fios Service?

Feb 13, 2013

connecting ASA 5505 with the Action Tech Router?

View 1 Replies View Related

Wireless N Router (DIR-655) / Can't See Media Server In Bridged Network

Aug 9, 2011

I have a wireless N router (DIR-655) in bridge mode connected to a TWC combo modem/wireless G router. I have Tversity media server running on a computer connected to the TWC, but my PS3 which is connected wirelessly to the TWC combo can't see Tversity. What am I missing? Do I need to forward some port from somewhere? FYI, I'm set-up this way so my N router can deliver full N speed, and my G devices connect to the slower TWC router. Everything sees the internet with no problem. Also, to note that devices connected to the D-link can see Tversity, but devices connected to the TWC cannot see Tversity

View 4 Replies View Related

Install Dlink Wireless Router / DIR 655 To Verizon Fios Internet

Jul 8, 2011

How do I install a D-Link Wireless router, DIR 655 to the Verizon Fios internet. I have tried different ways but cant get it to work.

View 13 Replies View Related

Linksys Wireless Router :: EA6500 No Internet Connected To Verizon FIOS Actiontec Router

Jan 20, 2013

I connected EA6500 internet port to actiontec router provided by Verizon fios. I don't have any other way to connect as FIOS connection is coax to actiontec modem. I must take a drop from actiontec to internet port on EA6500.
 
With that said, I can't get EA6500 to work, it keeps saying no internet. The only way I can get it to work is when I set it to bridge mode. This makes my EA6500 a dumb switch/access point. I didn't spend $200 for a switch. I need to use advanced features offered by this router but I can't until this problem is fixed. I made sure I am running latest version of firmware (1.1.28.146856).
 
I have reset my fios router as well as ea6500 to factory defaults multiple times.

View 9 Replies View Related

Linksys Wireless Router :: Verizon FIOS Internet / TV Setup With WRT54G2?

Nov 29, 2009

I'm trying to configure my Linksys WRT54G2 router as my primary router and have my Actiontec just used for the my FIOS TV (eg VOD, widgets, guide).  I've googled many HOWTO's on how to do this but I just cant get it working.  So setup up will look like this in th end:

(DHCP Server)
(Wireless)        (Only TV)
Internet >> WRT54G2 >>> Actiontec >>> PC/Laptops
|
FIOS TV -------------
 
how to set this up?  I understand that the STB devices configured on my Actiontec routers is actually my TV receiver and currently configured with the following IP addresses: 
 
IP-STB1:Connection Type:    Coax
192.168.1.100 
IP-STB2:Connection Type:    Coax
192.168.1.101 
IP-STB3:Connection Type:    Coax
192.168.1.103
 
I have COAX Ethernet setup so everything is going through ethernet per Verizon phone tech.
 
Actiontec Firmware Version:  4.0.16.1.56.0.10.11.6
WRT54G2 = DDWRT firmware
 
I've tried the following HOWTO's to no avail.[URL]

View 9 Replies View Related

Linksys Wireless Router :: E1200 Fails To Connect To Frontier FIOS Internet?

Jan 3, 2012

I am trying to set up my E1200 router to Frontier FIOS internet. I went thru the setup and it failed to connect to the internet. What settings do I need? Frontier says that it should find the connection automatically.

View 1 Replies View Related

Linksys Wireless Router :: Ea3500 Bridged Mode And Windows Network Drive?

Apr 5, 2013

I'm runing an ea3500 in bridged mode, classic configuration, firmware 1.0.30 build 126544. I got ftp working for my usb attached wv delements drive , but it is totally invisible in windows (except for ftp of course).I read in an older post that the usb drive in certain situations does not work (independent of disk manufacturer/type and such) and for certain configurations the ftp option might work but the windows mapped network drive doesn't , does that still apply? does it apply to bridged mode ?

View 1 Replies View Related

Can't Reach Router / Internet Anymore

Sep 1, 2012

I have got a problem with my LAN connection. I can't connect to the internet anymore and I can't reach my router. I rebooted my router several times, but that didn't work. I thought my network adapter was broken, so I bought a new one and reinstalled the driver, but it did not work. My router does recognize my computer though. When I tried to boot in safe mode with network opportunities, I was able to connect with my router and internet. I can't use System Restore as I don't have any restore points.

View 10 Replies View Related

One Computer Can Reach Router But Not Internet?

Aug 16, 2012

Just got a brand new router this morning. Hooked it up to the modem, called Bright House and had it set to bridge mode, set up our wireless range extender and everything was fineMy dad's mac laptop was able to connect as well as my win7 desktop. When my brother tries to connect using his win7 laptop, though, he can connect to the router but not to the internet. He keeps getting limited access. He was able to connect and use a neighbor's wireless (but obviously we don't want to be doing that) so we know it's at least working

View 5 Replies View Related

Router Or Modem Settings - No Computer On Network Can Reach Server

Feb 26, 2013

We have a Comcast business class cable modem with a static IP address. There are two devices hardwired to it; a server and a Linksys WRT610N, The server is hardwired to it with port forwarding set for ports 21, 80 and 5900. It works perfectly and can be reached as intended by the outside world but not by our own network. Our Linksys WRT610N is hardwired to the modem. All computers on the wireless network see each other and can access the internet perfectly. So all seems well enough. BUT, no computer on our network can reach our server. Using the domain name or VNC connections from inside our system results in time outs and no connection.

View 12 Replies View Related

Home Network :: Use Internet Of Workplace From Home Via Dial-up Connection?

Oct 3, 2011

I have ADSL modem in my workplace that is connected to a switch and other workplace computers are connected to this switch so the ADSL internet is shared in LAN network.(in each of computer I set default Gateway to ip of modem .....)I want to dial my workplace from home and then use of workplace internet or connect to workplace LAN.(such as VPN or Port Forwarding or I don't know...)

View 11 Replies View Related

Home Network :: No Internet Through WRT54GL Router?

Mar 18, 2012

Recently we ordered a new Modem from Centurylink to replace an old one we have. (which ironically the old one's wireless is way better) Both modems work perfectly fine, and I've tried the same things with both to figure this out. I ran an ethernet to my gaming room, which is about 150 feet. When I connect my computer directly into the modem, my computer works fine. Initially, the PS3 worked, but when I switched back to the computer with the single Ethernet cable, I was getting an IP error. Every since then, the PS3 will not connect through Ethernet. (Wireless works, but its so far away the signal is weak)

So, I dug up my router, Linksys WRT54GL, plugged it into the ethernet that came from the Modem, (did all the steps in order multiple times), and no internet through wifi or ethernet on it. The lights and everything say there is ethernet and the WIFI/Ethernet are working, but there is no internet. All the wires are confirmed fine. I've tested them on other devices plugged directly into the modem. I tried the PS3 at the modem with 3 Ethernet cords as a test, It says there is an IP Address timeout error. Regardless of what I do, the PS3 won't connect via Ethernet. And without internet working on the Linksys router, Im getting about 15-25% signal from the Modem. (which is also wireless, if that has anything to do with the issue)

I need the router to do at the very least, WIFI. I really want Ethernet though so I don't lose much speed. (We are maxed out here at 1.5mb connection from Centurylink)

When it comes to computers, I'm advanced with them. When it comes to networking, I'm okay. I understand basic things, like accessing the router or modem through the browser. I can do the whole setup for WIFI. But when it comes to how the IP address, Static IP, etc., goes, im confused by them. So forgive me if I sound ignorant. I've looked for over a week on sites, and nothing is working. The router may be broken, im not sure. I bought it a few years ago and then didn't need it till recently. So its been sitting in a box.

All I know is, I have an ethernet from the modem to this room, the PS3 refuses to get an IP, and if I do it too much the PC gets an IP conflict. If I plug the Ethernet into the internet part of the router and do wireless or Ethernet, there is no internet coming out.

View 1 Replies View Related

Home Network :: How To Use Another Router Just For Internet Access

Jun 19, 2011

Currently I'm living in a dorm. The house has wireless network. But WEP encryption is used to secure it. I know this method is not safe. Also since there are many people are living in the house i don't want my computers be connected to this network.What i want to do is to setup my own network. I bought a NetGear DGND3300 router. I setup a WPA2 protected wireless network. I can connect all my devices to this network but naturally this way i have no Internet access.Is there a way to use Internet access of the house's router but still keep my local traffic not seen by anybody else

View 2 Replies View Related

Home Network :: Can't Access Router Or Internet

Nov 24, 2011

Orange sent me a replacement Netgear DNG1000 and from the moment I had it there was issues, if N mode was enabled and I had to set it to B/G only for it to have a stable connection, not a problem as I only use it for the internet. The range on it was roughly the same as the livebox. For a few weeks it worked fine until recently it started to go insane, on the main computer the wifi works most of the time with 80%-95% signal strength, and then every now and then it will suddenly lose communication with the router but act as if it was connected for 5-10 minutes, signal strength is still at about 90% yet I can't access the router or the internet. Wifi works fine at full speed on the stairs, drops to a few bytes per second on the landing and then increases back up to full speed in the room next to it. In the one bedroom the wifi works up until the door where it instantly drops from full speed to a few bytes a second. This drop off point is only a few cms, as in full speed at one place, move it back a few cm and it slows down loads, but I still get 4-5 bars on windows and -50 RSSI on inSSIDer, about 94% strength and a link quality which tends to fluctuate. What could be causing this, specifically the weird instant deadzones and randomly not responding.

View 1 Replies View Related

Cisco :: ASA5510 Via IE On Windows Vista - Reach Router In Internet Explorer?

Jun 4, 2012

Since some days we have a ASA5510, we connected it on a Windows Vista Laptop via ethernet cable (using at the back of the router the mgtm slot) and connect it on the network slot on the laptop. Laptop is getting IP addresses automatically.
 
Now we tried to reach the router in the Internet Explorer using: http://192.168.1.1, but we could not reach this site. When I try to ping the router via cmd and typing ping 192.168.1.1 I get answers.
 
For us it is very important to change the IP address of the router, as he will be used in a network with 10.xxx.xxx.xx addresses.

View 2 Replies View Related

Home Network :: How To Access Router From Internet Browser

Jan 31, 2013

I am experiencing problems trying to access my routers HTTP-type configuration. I have a Billion 400G router. The address to access the router was always http://10.0.0.2 and that has always worked. A dialog box would appear asking for a username and password. Now it doesn't even reach that screen. It says that the connection timed out. I've tried Firefox/Chrome/IE10. To no avail. My system: Windows 8 build 9500. Also something weird. When I type in this Microsoft thing comes up with IIS 8.

View 2 Replies View Related

Home Network :: Can't Get Usb Modem To Connect To The Internet With Router

Jul 16, 2012

I'm having trouble connecting my 02 dongle to the internet using my router. My router is a TP-LINK MR3420 and my 02 modem device is E1752. I checked to see if the modem is compatible and it says it is. I went through the configuration that was given to me with the router and I tried using you tube but nothing. Do i need to get a static I.P address off my Internet provider? If I plug my 02 usb dongle directly into my computer it works perfectly and I got the router to work using a ethernet cable and plugging it into the WAN port at the back of the router but I would prefer to let it connect through the 3g port. I get a connection at 40% and 100 bytes are sent and some are received but the connection drops. Is it a problem with the connection? I will upload a image.

View 3 Replies View Related

Home Network :: Connecting A Router To Switch To Use Internet?

Mar 19, 2012

I have 24 port switch which is already connected to internet through static IP. Now I want to use a router as a wireless device to use internet. How do I connect router to switch?

View 3 Replies View Related

Home Network :: Backup Internet Access Through Secondary Router?

Jan 30, 2013

1. ADSL Wi-Fi router provided by my ISP. This is the primary router for my network which is connected to the internet. Router IP: 192.168.1.1 (DHCP enabled) 2. TP-Link wireless router which is connected to the primary router through its LAN port (not WAN) with its DHCP turned off. So I'm using this router ONLY to extend the network to another area. This is a 3G enabled router. Router IP: 192.168.1.2There are two different wireless SSIDs but basically only ONE network (all the PCs connected through any of the two routers are on the samesubnet and have same IP range i.e. 192.168.1.x). I want to use the 3G internet connection through the secondary router when the ADSL connection is down. Whenever the ADSL connection is down, I would just connect the 3G-USB to the secondary router, all the computers on the network should connect to the internet while skipping their route through the primary router WITHOUT CHANGING ANY SETTINGS. Is it possible? Do I need to modify the routing tables? Or is it

View 4 Replies View Related

Routers / Switches :: No Internet On 2nd Router Installed On Home Network?

Mar 23, 2012

I have 2 linksys routers installed on my home network. The primary router is a linksys WRT360n and is stationed inside the main home, while the 2nd is a linksys WRT160N located in my office. I've connected them via the lan to lan configuration and have disabled DHCP server on the 2nd. I can access the 2nd router via my primary PC but am unable to access the internet or see the primary from the PC connected to the 2nd router.

View 3 Replies View Related

Home Network :: Can Ping Gateway But Not Router And Slow Internet

Feb 21, 2011

A while ago internet access was slowed right down for an hour or so. I have a phone line that comes into the house and then into gateway (10.0.0.2) then ethernet from that to linksys wifi router (192.168.1.1). So I did the following ping and repeated what you see below a few times to see that these results were broadly consistent, which was the case. One other person is connected to linksys via ethernet cord and they might have been on at the time. Questions are.... are these results consistent with contention caused by other user on the linksys? and why can I ping gateway but not the router? That makes no sense to me! I am not annoyed with the other person if he is hogging the network...I like him. I just wonder whats going on. When the internet works results from pinging are all as one would expect

Microsoft Windows XP [Version 5.1.2600]
(C) Copyright 1985-2001 Microsoft Corp.
C:Documents and SettingsNASA>ping 192.168.1.1

[Code].....

View 4 Replies View Related

Home Network :: Wireless Router Significantly Slowing Down Internet?

Sep 19, 2011

I have cable internet with a speed plan in the 10-15 mbps range. I have a wireless Belkin g router that is several years old. Connected to the router I have my cable modem as well as my PS3. I connect wirelessly from my PC to the internet, as my PC is in the other room (more on that later). When I'm streaming movies via WiFi to my TV, the connection is highly unstable. Some days, I will not experience any stuttering (or very minor stuttering), whereas other times the stuttering is almost unbearable. Last night, I had trouble streaming a DVD quality movie whenever it went above 2 mbps total bitrate. Other times, I can stream HD movies without much stuttering (except for very action packed scenes).Interestingly, I stream Netflix movies over my PS3 via a *wired* connection. Last night, I conducted a speed test on my PS3. First, I had the PS3 plugged into the wireless router. I achieved speeds around 2 - 4 mbps on average. I then plugged my PS3 directly into my modem and achieved speeds around 10 mbps! The boost was instantaneous. I should note that on my PC, I speed test regularly over the WiFi and achieve around 4-6 mbps on average (only once did I achieve 11 mbps).

View 4 Replies View Related

Linksys Wireless Router :: Can Use E1200 For Home Network Without Internet

Nov 24, 2012

I would like to wirelessly connect my printer through the new router without internet.  The setup CD won't allow me to install without an internet connection.

View 2 Replies View Related

How To Network Two Fios Routers

Aug 31, 2011

I had Verizon install an additional router since I have expanded my CAT5 lines in my home. When the tech installed the second router her told me I had to network them otherwise I would have issues but he couldn't do it because he did not know how.

View 2 Replies View Related

Linksys Wireless Router :: E1000 - Home Network Setup Without Internet?

Dec 25, 2011

Was told by a HP technician that I could setup a .wireless home network for the purpose of having my iPad and iPhone 4 connect to my D100 HP printer. Installed the disc that came with my router and can't get passed the point that requires a password. All my devices recognize the router but everything requires a password which I am able to provide. Can this router be setup without having Internet access if so then how?

View 2 Replies View Related

Linksys Wireless Router :: E4200 Dropping Internet Connection In Home Network?

Apr 2, 2012

I have a home network with a Linksys E4200 connected to the ISP's fiber box. The problem is that when I'm connected to the Linksys, either wired or wireless, the connection to the internet will drop after what seems to be a random amount of time (normally anywhere from 2-10 minutes). I can restore the connection by doing any of these things:-reboot Linksys-disconnect and reconnect cable from router to fiber box-if on wireless connection, make changes to the router wifi settings, like change the wifi channel.The internal network stays up, and I can ping both the internal and external ip of the router, but not the fiber box. I have also had the same behavior with an Edimax Wifi AP and less frequently with a Edimax router (once every 1-2 days). I have done everything I can think of:-changed the wifi channels-changed the ip ranges, subnets, turned router DHCP off and back on-booted the fiber box-changed cables-updated all routers to the latest firmware, the network cards with latest drivers...and loads other things that I don't remember right now. For the wifi side of things, there are no other networks in range that could interfere. The same problem occurs on both my and wife's Win 7 laptops and on the iMac (latest OSX). Here's a fun detail: while the Linksys has lost its connection to the internet, I can still access the internet through the old Edimax router connected to the same fiber box, either wired or wireless.

View 1 Replies View Related

Linksys Wireless Router :: Home Network E1000 Setup Without Internet Access?

Aug 3, 2011

Was told by a HP technician that I could setup a .wireless home network for the purpose of having my iPad and iPhone 4 connect to my D100 HP printer. Installed the disc that came with my router and can't get passed the point that requires a password. All my devices recognize the router but everything requires a password which I am able to provide. Can this router be setup without having Internet access if so then how?

View 3 Replies View Related

Home Network :: Netgear Router WNR 2000 V3 - Cannot Access Internet When Security Password Chosen?

Apr 13, 2013

I just bought a Netgear Router WNR 2000 v3 and installed it. I got inside the router and could set up a Network Name and security key. However, I can not access the internet when I chose a security password using WPA 2, WPA-PSK + WPA 2 PSK, or WPA/WPA 2. It only accesses the internet when I chose None.( no secured ).At this time, my network is unsecured because there isn't way I can access the internet when I create a security key using the 3 options the router offers.

Note : I have tried the 3 security options creating a key number and my computer connect to the wireless network but don't access the internet. It only access the internet when I select None ( no secured )

View 2 Replies View Related

Linksys Wireless Router :: E900 - Share Internet Connection With Rest Of Home Network

Mar 10, 2013

I am currently connecting my PC to a mobile phone as a Wireless Access Point to give that PC access the internet. I also have a small home network, with one other PC and a Game Console. I own a Linksys E900 Wireless-N300 Router. My problem is this. How do I share that internet connection with the rest of the home network?To the best of my knowledge its not possible to connect my mobile phone directly to my Linksys E900 Wireless-N300 Router.

So my alternative idea is to connect to the internet via one PC, set up that internet connection as "Shared." and then allow the other devices on the home network to connect thru this. My question is how do I set up my  Linksys E900 Wireless-N300 Router to allow my other PC and game console connect to the internet? Bridge Mode? PPPoE?

View 1 Replies View Related

Cisco Wireless :: Replace 352 Bridged Network With 1552s?

Mar 20, 2012

I have a question concerning replacing a 352 bridged network with 1552 mesh access points. Theoretically, imagine a centralized 352 with an omnidirectional antenna that is linked to multiple 352's with yagi antennas in a hub-spoke fashion. If this central 352 is replaced with a 1552 access point, will the existing Yagi's be able to talk to the 1552? I understand that the Yagi's AP's should be replaced with 1552's as well (thus forming a mesh network as the 1552s are designed to do) but for the sake of theory please assume the 'spoke' 352s will not be replaced. I have the understanding that the 1552s communicate over the 802.11a for the backhaul so I'm thinking this would cause some issues with the 352's.

View 2 Replies View Related

Cisco Routers :: RV220W Losses WAN (FIOS Internet) To LAN Bandwidth

Sep 24, 2011

I Just got FIOS internet at Home with 43 Mbps down and 32 up (measured speed). I replaced the included router with my old reliable RV042 (V1) VPN router that I used with my old service in NY LI. This has been working very stable for  week or two, but I use my old 042 to remote desktop via VPN from my work, that was limited to maybe 9-10 Mbps (Home to office) way down from the 32 up I have now (the office has 80Mbps down). So I researched that the RV220W had a VPN speed that was much faster and I ordered one that I am trying this weekend.Out of the box, I plugged accessed and just clone the MAC at the WAN port to match the replaced FIOS router. Power cycle and surprise, no IP from FIOS!. After trying a number of things, I gave up and updated the firmware to the last 1.0.2.4, and that fixed this. I still need to clone the MAC to void calling Verizon FIOS, but at least I get IPs and Internet with no trouble.Next, I configured a couple forwards for two web servers. I found about the bug in this same forum and just used the rules instead. Working good so far.
 
So now I test WAN bandwidths, and I found all kind of trouble. With the old RV042 and similarly to the included Verizon router I can do steadily 43d/32u. Especially at night is quite stable in these numbers. When I went and move the cables to the RV220W (exact same set up) the speed went all over the map from 4d/8u to 43d/25u. If I power cycle the box, things tend to be stable again around 43d/25u. So, after a while being stable in these numbers I start trying things to improve the 25u that should be around 32u, and recover the missing 7 mbps. Not much I can think, so I just randomly enabled the QoS settings trying to reserve full BW for my tests, and I found just that enabling WAN QoS, and nothing else, no profiles or changes in the Priority Settings, I go up to 30u consistently over a number of tests. This do not affect  the down speed that is stable at 43 mbps. The surprising thing, is why this affect to the up speed when nothing else is going on in my network? and also where are the other 2 Mbps to complete the 32 Mbps that I can do with the RV042 (V1) or the cheap included router? In my opinion, if I don't use QoS, I should get full bandwidth to whatever application/computer that requests so, period.

View 1 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved