Cisco :: ASA5510 Via IE On Windows Vista - Reach Router In Internet Explorer?
Jun 4, 2012
Since some days we have a ASA5510, we connected it on a Windows Vista Laptop via ethernet cable (using at the back of the router the mgtm slot) and connect it on the network slot on the laptop. Laptop is getting IP addresses automatically.
Now we tried to reach the router in the Internet Explorer using: http://192.168.1.1, but we could not reach this site. When I try to ping the router via cmd and typing ping 192.168.1.1 I get answers.
For us it is very important to change the IP address of the router, as he will be used in a network with 10.xxx.xxx.xx addresses.
View 2 Replies
ADVERTISEMENT
Feb 5, 2011
I connected to a hotspot that is available for Me to connect to. I connected to one, then I went to the little bars to make sure it's actually connected, It says "Internet Access" (Windows 7) Which means it's connected. Then I clicked on Internet Explorer, to go on the Internet, and It says.. "Internet Explorer cannot display the webpage" Then I clicked on "Diagnose Connection problem" It started to detect the problem.. When it was finished it said.. "Website (Yahoo!) is online but isn't responding to connection attempts."
I went to Tools, Internet Options, LAN Settings, and I checked the First two boxes. Where it says "Address" I put in [URL]then I went back, and went on the Internet but It still says ---"Internet Explorer cannot display the webpage" Then I went back to Tools, Internet Options, and took off [URL]then tried again, then I went back to the Internet but it still said the same thing saying-----"Internet Explorer cannot display the webpage" Then I clicked on "Diagnose Connection problem" and it ---started detecting the problem.. and when it was finished detecting it said...---"Windows could not automatically detect this network's proxy settings."
You only want "Automatically detect settings" checked. The second check box if for a configuration script or the like to setup IE settings. That is really only used by company's that want specific home pages and other settings set to match their networks.If anything is checking in the "Proxy Server" area, I would uncheck it as you won't go through a proxy since you are connecting to a hotspot. It is pretty rare for public locations to use proxy servers.I connected to a hotspot that is available for Me to connect to. I connected to one, then I went to the little bars to make sure it's actually connected, It says "Internet Access" (Windows7) Which means it's connected. Then I clicked on Internet Explorer, to go on the Internet, and It says.. "Internet Explorer cannot display the webpage" Then I clicked on "Diagnose Connection problem" It started to detect the problem.. When it was finished it said.. "Website (Yahoo!) is online but isn't responding to connection attempts."
View 14 Replies
View Related
Nov 2, 2011
I have 2 desktops and a laptop accessing a wireless Motorola modem using roadrunner broadband. My desktop/Vista and laptop/Windows 7 are working fine. My older desktop with XP has a wireless card and shows that the wireless is connected with great signal strength but won't access Internet Explorer. I keep getting an error message. I have tried re-setting up the wireless and shutting down the machine ,etc. I have seen a few older posts that suggest downloading some software, etc
View 1 Replies
View Related
Feb 7, 2012
I have a hp laptop, it's about two years old. I can connect to my wireless network, but i have no internet access. I also have a macbook, and it's accessing my wireless network perfectly fine.
My router does not have a password ( yes, i know, pretty dumb of me)
View 2 Replies
View Related
Aug 13, 2011
I am not able to connect my HP laptop (Windows Vista) to the internet via a wireless router/high speed internet.My internet service provider confirmed that it is a problem with my HP laptop.I have a Linksys router. My other laptop (Sony) connects fine.I have tried two browsers on my HP laptop to access the internet with no luck.My HP laptop does say that I am connected to the wireless network.
View 9 Replies
View Related
May 4, 2012
I replaced my D-link router with a new EA4500 last night.I can get to the internet, I set up 2 computers wirelessly, I set up a printer wirelessly.I am struggling with the NAS.I have a D-link DNS-323 which was previously connected to the D-link router via ethernet cable and worked fine.The Cisco Connect software does NOT have the ability to "connect" an ethernet-connected device, only USB or wireless.Windows Explorer does not see the DNS.The DNS- 323 has a fixed IP address which I know. I type it into my browser and it can't find it.I have shut down the DNS and unplugged the power for a full reset.I am running Win 7 Ultimate on my PC.
View 4 Replies
View Related
Apr 2, 2012
So my Dad got a new Windows 7 computer, and gave me his old windows vista. When we got his computer all hooked up, and hooked up the windows Vista next to it. My mom wanted to use it to check her email. she didnt download anything, but after she turned it off, and i turned it back on, the computer would not detect any type of internet activity. i put in a new ethernet card, and it still would not work. The sound on the computer has also stopped working. i checked windows audio service, and it says its running, and there is no detected problem with any of the hardware.
View 3 Replies
View Related
Mar 21, 2011
I am having trouble getting internet access on my daughters laptop. she has os vista while my pc is windows xp. keep getting connection unsuccessful...this computer is connected to dlink but does not have access to the internet. showing currently connected to unidentified network(dlink) access:local only. took it to a shop where the man connected to his internet straight away? This is what it says when i,ipconfig/all
View 3 Replies
View Related
Mar 8, 2011
The problem I was having was my laptop wouldn't connect to my new router provided by them, it would say it was connected but 'Local Only'. Turned out in the end all I needed to do was update my Atheros and Realtek drivers. Months down the line, now having the same symptoms, I decide to update my drivers only to find out there are no updates available and my drivers are up to date and working. The only other thing that may be the root to the this problem is the fact last night I connected to my girlfriends router at her house with this same laptop. Now I come back to my router this evening and I'm having these symptoms I had months ago. It's also saying the network is 'Undentified' eventhough it SAYS it's connected. It doesnt allow me to access the internet at all. I removed the history of my girlfriends connection on manage wireless networks, including my own.
View 4 Replies
View Related
Nov 5, 2011
Was able to connect to my network fine a couple of days ago. Now It doesn't want to work.
Everytime I try it seems like I connected (the little blue globe symbol displays) but when I try and go to a webpage, the connection times out or moves slow. When I run diagnose and repair it tells me that this computer has "limited or no connectivity" even though I'm able to connect to other networks. Selecting the "automatically get new IP settings" and "reset network adapter" options don't work. After selecting these earlier it was telling me "unable to connect to primary DNS server", then it was telling me "windows has confirmed this computer is currently experiencing a network connectivity problem". Now it's telling me there is no problem in spite of the slow connection.
I don't think my wireless adapter is the issue, I'm able to connect to other networks fine. I don't think the router/modem is the issue, there's another computer in the house (that I don't own) as well as my xbox hooked up wireless to it with no problem.
View 6 Replies
View Related
May 6, 2012
I am having trouble connecting to the internet in Windows Vista Sp2. I have looked in device manager for any type of ethernet device, and I don't see one. I do not have a wireless adapter installed, but when I plug in an Ethernet cord I don't see any type of bubble saying I have new connections. I don't Even have the icon that should say local area connection in network connections
View 19 Replies
View Related
Dec 18, 2011
I had to do a system restore on my laptop and as i tried to restore it a message kept coming up saying Windows failed to start. I read in another forum to reinstall Windows Vista and I did that which restored my laptop to factory settings. I tried connecting to the internet but it says : This computer does not have a wireless network adapter installed and configured"
View 8 Replies
View Related
Mar 13, 2013
The network is "connected" but the internet still does not work. I have wireless internet and a Windows Vista computer. It also says the network is unidentified.
View 3 Replies
View Related
Mar 28, 2011
What is the best internet security for a Gateway laptop with Windows Vista?
View 1 Replies
View Related
Sep 15, 2012
She has an older HP Vista laptop that connects to the internet just fine (including downloading updates, connecting to messenger clients, etc.), but it will not connect to any of her browsers...
1. I understand firewalls can throw huge issues, I am pretty sure this is where the problem lies. She was using Ad-aware and I am pretty sure that the window that popped up that she clicked switched her firewall settings back to default and left something weird in the system. When I try to disable Windows firewall and go back to Ad-aware it won't let me exit snooze. It asks if I confirm and when I do nothing happens.
2. I have done a winsock reset and made sure that the proxy boxes are unchecked to make sure there isn't a proxy problem.
3. The ipconfig/reset threw no errors, everything looks fine.
4. No hardware conflicts or errors reported in device manager and all drivers are up to date. Again since the internet is actually working minus the browser I don't think it is a hardware issue.
5. No virus detected. Symantec is loaded on the laptop did a run with that, also have AVG that I installed and ran (disabled one and did the other, never run simultaneously). AVG is now uninstalled as Symantec is disabled to avoid any conflict with AdAware.
Is there any way to completely disable all firewalls, remove any settings or registries (if any), and start from scratch with it? Also, as networking is by far my weak point, is there anything I need to check as far as the DNS is concerned?
View 7 Replies
View Related
Apr 4, 2011
i am using windows vista on my laptop.i was using zone alarm firewall, but switched it to windows firewall.after switching, my internet was cutoff. i can see that i am connected to my network, but cant get to internet.when i run diagnosis on my laptop, it gives me three options:
my Ethernet driver is having hardware issue.
my wireless driver is having hardware issue.
ip protocol binding is having issue. check ipv4 and ipv6 settings.
View 1 Replies
View Related
Nov 30, 2012
My Laptop stopped having internet access. I am able to connect to my Linksys (says Limited Access) but then it states I do not have internet access. I read other forums and tried to do the "command prompt" but when I try to run as administrator it tells me "The specified service does not exist as an installed service". I am using Windows Vista and McAfee as my spyware.
[code]....
View 11 Replies
View Related
Dec 31, 2012
I am running on Windows Vista and out of no where I cannot connect to my network %70 of the time. When I can connect I have local access and a full bar signal but no Internet access. But when I have internet access every page takes forever to load (if it even loads). I tried reinstalling my drivers and even hanged some registry stuff. My wireless card 8.11g by Broadcom.
View 3 Replies
View Related
Jun 8, 2012
I have been trying to connect to the internet with my new adsl2+ wireless internet with dodo, i rang them and they say its my toshiba laptop windows vista that is the problem, it says that i can connect to the internet and from their end it confirms it however when i open a web browser it always comes up with page unavailable, i can connect no issues to the net via the modem connection cable but i need to connect wirelessly asap?
View 7 Replies
View Related
Nov 9, 2012
I HAVE INSTALLED A NEW NETGEAR ROUTER BUT THOUGH MY LAPTOP SHOWS I AM CONNECTED TO THE ROUTER I CANNOT CONNECT TO INTERNET EXPLORER., WHY? MY IPAD WORKED FINE BUT NOT THE LAPTOP.
View 3 Replies
View Related
Feb 25, 2012
My wife can't access the internet on her laptop, The computer is a Dell Inspiron 1750 with Windows 32 bit vista. I have the Internet plugged into the wire on the side of the computer, I am not using the wireless at the home. The wire going to the computer works on another computer for the internet.
View 1 Replies
View Related
Mar 9, 2013
On my desk in my basement I have two computers, one HP Pavilion running Windows 7, and a Dell Precision running Windows Vista. Now I was wondering if it is possible to share the internet received on the HP to the Dell by the ethernet connections?
View 1 Replies
View Related
Apr 20, 2012
I have this test windows 2008 r2 server. I can connect to the internet on this server.However my client xp machine, cannot see the server via windows explorer. I can however ping the windows 2008 r2 server. Using the servers ip of 192.168.1.230 Another thing is I cannot also remote to the server on the internal LAN. Using RDP.I ve even tried with firewalls turned off on the server for some mins.
View 1 Replies
View Related
Sep 23, 2012
Client connects to PIX 501 but cannot see the LAN in Windows Explorer.Devices can be pinged by IP and hostname (netbios name)I can navagate to a server by typing in \servername.Why can I not get a resolution from Cisco techs? [code]
View 1 Replies
View Related
Sep 24, 2012
This issue just started happening. I have a Sierra Wireless Aircard 595 plugged into a WRT54G3G-ST. I will be browsing the internet and all of a sudden, I get the message that Internet Explorer cannot find the web page. At that point, I cannot get to any website. I have several PC's, both wired and wireless connected and they all have the same problem,. I have tried Google Chrome, Firefox and IE9 and all browsers have the same issue. My email continues to download through Outlook, I can use WS FTP and I can also log in to a remote computer using Logmein. It is just browser access that is affected.
There is no set time table to the error. Sometimes it happens within minutes, sometimes it is 30 minutes and sometimes it is over an hour. The only way out of it is to either unplug the router, let it set 30 seconds, then plug it back in or I found that I can go into the setup and do a disconnect from mobile broadband and reconnect and it starts working again. Of course, Sprint says they do not deal with issues unless the card is plugged directly into my PC, which is not the environment that I am running in (even though I bought the router and card from them.) Does Linksys still make a mobile broadband router?
View 4 Replies
View Related
Sep 1, 2012
I have got a problem with my LAN connection. I can't connect to the internet anymore and I can't reach my router. I rebooted my router several times, but that didn't work. I thought my network adapter was broken, so I bought a new one and reinstalled the driver, but it did not work. My router does recognize my computer though. When I tried to boot in safe mode with network opportunities, I was able to connect with my router and internet. I can't use System Restore as I don't have any restore points.
View 10 Replies
View Related
Aug 16, 2012
Just got a brand new router this morning. Hooked it up to the modem, called Bright House and had it set to bridge mode, set up our wireless range extender and everything was fineMy dad's mac laptop was able to connect as well as my win7 desktop. When my brother tries to connect using his win7 laptop, though, he can connect to the router but not to the internet. He keeps getting limited access. He was able to connect and use a neighbor's wireless (but obviously we don't want to be doing that) so we know it's at least working
View 5 Replies
View Related
Aug 17, 2011
I am new to this forum. I ve been googling for CCNA explorer for last one month. All the versions that i download is not compatible with windows 7 and works fine with windows XP. Does anyone know if cisco has released any new version that is compatible with Windows 7?
View 6 Replies
View Related
Apr 13, 2012
I have some issues with win 7 64 bit pro. I have 3 computers on a cat 5 wired home LAN using a DGL-4500 router and in yhe same homegroup. All are gigabit capable. 2 are regular PCs, one is an HTPC. All have the latest drivers.1) File transfers never exceed 12% of the network capacity.2) If I transfer from computer A to computer B's public folder, I can transfer 1GB in a few minutes. However, if I attempt to copy/paste a file from Computer B's public folder to computer A, computer A takes forever "discovering" the file, then gives some absurd transfer time, say 11 hours for the same file.3) If however I go to computer B and paste the same file into Computer A's public folder, the transfer takes only a few minutes.
4) If at any point during scenario #2 I right-click B's public folder from A during a transfer, I get the spinning circle forever which 90% of the time results in Explorer hanging and requiring the process to be killed/restarted.
View 4 Replies
View Related
Nov 28, 2012
I have a small mixed peer-to-peer network comprising 2 Win7 PCs, an iMac and a Win7 laptop and 2 little file servers: a Netgear Stora and a LaCie-2big.Stora is correctly listed under the Network part of Windows Explorer, but LaCie isn't, although I have been able to map a drive to a share on LaCie.No problem accessing files etc.Why would the LaCie not be displayed in the Explorer file tree?
View 2 Replies
View Related
Aug 25, 2011
My Samsung phone is working as it should as an USB device (using KEIS and such). However though it receives ip address from DIR-655 router and is registered by MAC address in router - also possible to ping its IP from windows I cannot see it in /Network from my WIN7 64bit OS? The desktop comp is wired to the router, phone is on wireless.
I ve tried several settings and almost had it. It did work some months ago...
From log; "SSID": Wireless system with MAC address XXXXXX secured and linked" (That is my mobile phone)
View 14 Replies
View Related
Feb 14, 2012
I have Virgin Media services, I had a problem with my cable, which an engineer was booked for, but it magically fixed itself, so I cancelled the engineer. The engineer turned up for the appointment, which I was out for, then urged me over the phone to keep his number, and call me if I had any problems. I got home an hour later and my modem wouldn't sync. My guess is he did something with it outside so he would still get paid for the job. I called him up, and he came round and instantly replaced my old Virgin modem (which I was using with my own Belkin wireless router) with a new Virgin (Netgear) hub.I'm giving this bit of background to demonstrate, everything was fine before. [code] Since getting the new hub, I set up the wireless connections on the laptop and console, and internet is working fine. However none of the devices can share with eachother.When I go to network on either computer, neither computer sees either computer.All the sharing settings that I had before are unchanged, all that has changed is my modem/router combo has been replaced by a hub.
View 14 Replies
View Related
Mar 26, 2013
Linksys WRT610N displays garbage when accessing the "Wireless Page" in Internet Explorer (from Windows 7 or Windows 8)My issues is simmilar to one reported here: url...Accessing my Linksys Wireless Router model WRT610N using IE opening "Wireless" page displays full screen of garbage characters (looks like chinese).
View 2 Replies
View Related
