I am new to this forum. I ve been googling for CCNA explorer for last one month. All the versions that i download is not compatible with windows 7 and works fine with windows XP. Does anyone know if cisco has released any new version that is compatible with Windows 7?
View 6 Replies
I am running firmware 1.0.1.9 on an RV180. After recently upgrading to Microsoft Internet Explorer 10, I notice the RV180 administration screens do not display properly. Specifically, the horizontal window pane is set so high (not adjustable) all the information is not fully displayed. If I use a previous version of Internet Explorer I don't have a problem or if I use another browser like Google Chrome I don't have a problem. So it appears the RV180 and Internet Explorer 10 are not fully compatible.
Below is a screenshot using Internet Explorer 10 showing the Status page. You can see the horizontal window cuts off most of the information and there does not seem to be a way to "pull" it down to display more information.
Here is the same Status Dashboard selection via Google Chrome. Unfortunatly I don't have Internet Explorer 9 still installed, but it worked fine.
I have this test windows 2008 r2 server. I can connect to the internet on this server.However my client xp machine, cannot see the server via windows explorer. I can however ping the windows 2008 r2 server. Using the servers ip of 192.168.1.230 Another thing is I cannot also remote to the server on the internal LAN. Using RDP.I ve even tried with firewalls turned off on the server for some mins.
View 1 Replies View RelatedI have some issues with win 7 64 bit pro. I have 3 computers on a cat 5 wired home LAN using a DGL-4500 router and in yhe same homegroup. All are gigabit capable. 2 are regular PCs, one is an HTPC. All have the latest drivers.1) File transfers never exceed 12% of the network capacity.2) If I transfer from computer A to computer B's public folder, I can transfer 1GB in a few minutes. However, if I attempt to copy/paste a file from Computer B's public folder to computer A, computer A takes forever "discovering" the file, then gives some absurd transfer time, say 11 hours for the same file.3) If however I go to computer B and paste the same file into Computer A's public folder, the transfer takes only a few minutes.
4) If at any point during scenario #2 I right-click B's public folder from A during a transfer, I get the spinning circle forever which 90% of the time results in Explorer hanging and requiring the process to be killed/restarted.
I have a small mixed peer-to-peer network comprising 2 Win7 PCs, an iMac and a Win7 laptop and 2 little file servers: a Netgear Stora and a LaCie-2big.Stora is correctly listed under the Network part of Windows Explorer, but LaCie isn't, although I have been able to map a drive to a share on LaCie.No problem accessing files etc.Why would the LaCie not be displayed in the Explorer file tree?
View 2 Replies View RelatedI connected to a hotspot that is available for Me to connect to. I connected to one, then I went to the little bars to make sure it's actually connected, It says "Internet Access" (Windows 7) Which means it's connected. Then I clicked on Internet Explorer, to go on the Internet, and It says.. "Internet Explorer cannot display the webpage" Then I clicked on "Diagnose Connection problem" It started to detect the problem.. When it was finished it said.. "Website (Yahoo!) is online but isn't responding to connection attempts."
I went to Tools, Internet Options, LAN Settings, and I checked the First two boxes. Where it says "Address" I put in [URL]then I went back, and went on the Internet but It still says ---"Internet Explorer cannot display the webpage" Then I went back to Tools, Internet Options, and took off [URL]then tried again, then I went back to the Internet but it still said the same thing saying-----"Internet Explorer cannot display the webpage" Then I clicked on "Diagnose Connection problem" and it ---started detecting the problem.. and when it was finished detecting it said...---"Windows could not automatically detect this network's proxy settings."
You only want "Automatically detect settings" checked. The second check box if for a configuration script or the like to setup IE settings. That is really only used by company's that want specific home pages and other settings set to match their networks.If anything is checking in the "Proxy Server" area, I would uncheck it as you won't go through a proxy since you are connecting to a hotspot. It is pretty rare for public locations to use proxy servers.I connected to a hotspot that is available for Me to connect to. I connected to one, then I went to the little bars to make sure it's actually connected, It says "Internet Access" (Windows7) Which means it's connected. Then I clicked on Internet Explorer, to go on the Internet, and It says.. "Internet Explorer cannot display the webpage" Then I clicked on "Diagnose Connection problem" It started to detect the problem.. When it was finished it said.. "Website (Yahoo!) is online but isn't responding to connection attempts."
I have 2 desktops and a laptop accessing a wireless Motorola modem using roadrunner broadband. My desktop/Vista and laptop/Windows 7 are working fine. My older desktop with XP has a wireless card and shows that the wireless is connected with great signal strength but won't access Internet Explorer. I keep getting an error message. I have tried re-setting up the wireless and shutting down the machine ,etc. I have seen a few older posts that suggest downloading some software, etc
View 1 Replies View RelatedMy Samsung phone is working as it should as an USB device (using KEIS and such). However though it receives ip address from DIR-655 router and is registered by MAC address in router - also possible to ping its IP from windows I cannot see it in /Network from my WIN7 64bit OS? The desktop comp is wired to the router, phone is on wireless.
I ve tried several settings and almost had it. It did work some months ago...
From log; "SSID": Wireless system with MAC address XXXXXX secured and linked" (That is my mobile phone)
Client connects to PIX 501 but cannot see the LAN in Windows Explorer.Devices can be pinged by IP and hostname (netbios name)I can navagate to a server by typing in \servername.Why can I not get a resolution from Cisco techs? [code]
View 1 Replies View RelatedI replaced my D-link router with a new EA4500 last night.I can get to the internet, I set up 2 computers wirelessly, I set up a printer wirelessly.I am struggling with the NAS.I have a D-link DNS-323 which was previously connected to the D-link router via ethernet cable and worked fine.The Cisco Connect software does NOT have the ability to "connect" an ethernet-connected device, only USB or wireless.Windows Explorer does not see the DNS.The DNS- 323 has a fixed IP address which I know. I type it into my browser and it can't find it.I have shut down the DNS and unplugged the power for a full reset.I am running Win 7 Ultimate on my PC.
View 4 Replies View RelatedSince some days we have a ASA5510, we connected it on a Windows Vista Laptop via ethernet cable (using at the back of the router the mgtm slot) and connect it on the network slot on the laptop. Laptop is getting IP addresses automatically.
Now we tried to reach the router in the Internet Explorer using: http://192.168.1.1, but we could not reach this site. When I try to ping the router via cmd and typing ping 192.168.1.1 I get answers.
For us it is very important to change the IP address of the router, as he will be used in a network with 10.xxx.xxx.xx addresses.
I have a desktop PC running WinXP I recently got a laptop running Win7. I Set both of them up with the same workgroup name, and now my XP machine can see and access my laptop, but my lap can't see my XP machine. If it makes any difference, I can remote into my XP from my laptop, but that's not what I need.
View 3 Replies View RelatedMy onboard network adaptor card died so I bought a Rock USB lan Card RJ-45. It worked for 30 mins then just stopped working. When I look at the device driver details, it recognises it, and also says the drivers are up to date. When i try to connect to the modem for internet connection it says ....There might be a problem with the driver for the Local Area Connection 4 adaptor. A network cable is not properly plugged in or may be broken....Ichanged the cable, still same message, I went to the internet on another computer to download drivers but it still says drivers are up to date. My system is a hp p6380a home pc. Running windows 7 64 bit. Im thinking that it might be a faulty usb card but when I spoke to a guy at a computer shop he said that they are not compatible with 64bit computers. Ok then why did it work for 30 - 1hour.
View 1 Replies View RelatedI have just spent an hour with TalkTalk technical support being told that the new router they supplied today can only be used wirelessly for Vista or W7 but not both together. Am i going mad. Both connect to the router but my Vista laptop will not connect to the internet and will only show as an unidentified public network.
View 5 Replies View RelatedI can't find a good network driver for my old HP a1007w PC. It has a rtl8201cl internal card. I have tried several drivers and nothing works. Where to get the correnct Win 7 64 bit driver for a rtl8201cl ethernet card or give me a compatable ethernet card that I can search for a different driver.
View 2 Replies View RelatedI just bought this router for my new windows 8 desk top computer. I will be connecting it to the computer via ethernet. The box does not say that this is windows 8 compatible. Will this work with my new computer?
View 2 Replies View RelatedWe are planning to upgrade CORP Domain from Windows 2003 Active Directory Schema to Windows 2008 R2 Active Directory Schema.
I wanted to know if the following applications which are installed on windows (domain member servers) are compatible with windows 2008 server R2 schema?
CiscoWorks LAN Management Solution 2.6 Cisco Secure Access Control System 4.2Cisco Fabric Manager 1.5
Does WRT100 model is compatible with Windows 8? Everytime I connect my laptop all the other devices drop their connection.
View 2 Replies View RelatedDell 365 Bluetooth Adapter program for [ Dell Studio 1558 ] is not compatible with windows 8. please update this program for compatibility with windows 8.
View 1 Replies View RelatedI recently purchased a new Dell Inspiron laptop with Windows 7. When I try to load my printer (Dell 924 All-in-one) and wireless printer adapter (Dell 3300) software it says it is not compatible with Windows&. Is there a patch or something that I can download from Dell to fix this issue?
View 2 Replies View RelatedI ordered a set of hardware that came with CBT videos; however, the videos they sent do not exactly match the hardware and I'm stumped.
I have 3 routers:
2610XM: Indianapolis
2620:New_England
2610:Seattle
Indianapolis connects to New_England with a WIC-1DSU-T1
Indianapolis connects to Seattle with a WIC-1T
The interfaces are up on all three devices and so are the protocols. The videos are of 2500 series routers and they only use the WIC-1T card. When I try to set the clock rate for the s0/1 on New England to 1000000 like the video suggest I get an error "this command only applies to DCE interfaces". Do I not need to set this on the WIC-1DSU-T1 interface?
Whenever I issue router rip and try to set network such as:
router rip
network 10.0.1.0
network 10.0.10.0
network 10.0.20.0
the network won't save on any of the devices. If I show the running-config it shows network 10.0.0.0 I've tried saving the config directly after exiting outt of the config mode, but still only 10.0.0.0
Is the BEFSR41 Ver 3.1 compatible with Windows 7, 64 bit computers?
View 2 Replies View RelatedAfter some searching I see many people using power injectors or switches that supploy PoE. I am building a lab for the CCNA Wireless and currently have an old Cisco 3550 PoE switch and a 2106 Controller that I got at a steal of a price. My question is, The 1142 can use the 15.4 Inline Power from the 3550 even though it is not the 802.11af standard correct? If it doesn't then I will need to order a power brick.
View 3 Replies View RelatedI'm looking to sit the ICND2 exam soon and have discovered that the pair of old 2924XL switches are not going to cut the mustard for the newer vlan commands and other features.
Would a pair of WS-C3550-24-SMI switches be a sensible replacement for ICND2 and possibly up to CCNP? They are available on ebay for about £80 each.
I installed W8 on my Dell Studio 1735 computer. Wireless Internet access is very very slow. I have not this problem with W7 on the same computer. I tried it with an external Network cable. Very fast, 50mbps. I also tried it with an external USB Belkin wifi adaptor. It works fine. Computer has a Dell Wireless 1500 N WLAN Mini Card. Driver version:5.100.245.20 Date 2012-03-13. I cannot find any better driver.
I have one more problem that I don't have with W7. I cannot rate the computer. The Windows experience index cannot go past the test of Direct3D 10 Texture Load Assesment.
What's the best router / handset to get to practice for CCNA Voice?
View 2 Replies View RelatedI'm reading the CCNA Sec book (554) and I've just finished a few chapters on CCP.Is the tool free? Can it be simulated in PT, or emulated in GNS3? Speaking of which, can the entire CCNA/CCNP Sec track be emulated in GNS3?
View 6 Replies View RelatedNo connectivity for any application other than Internet Explorer.Can not update any applications. Can not sign in to any apps, such as Paltalk, AIM, etc.Internet Explorer runs fine.
Computer Specs:
-Compaq Evo N800c
-Windows XP SP3
-Pentium 4 - M 2.0ghz 1.99ghz
-512MB RAM
Computer was bought refurbished and I believe XP had been re-installed and I am not sure if all the factory divers were properly re-installed...
I have always been using internet explorer and have never had any trouble opening up web sites. However this week trouble has started when using a stock trading site. When I open up the "Home Page" of IG Index this opens in full no problem. But when I then click on the tab to open up the trading section section this opens but not fully. The tool bar across the top but the main body of the page, the frame, is blank. I have tried internet options, deleting history etc and disc clean up but to no avail. Have also tried system restore but no good. Have soken ti IG Index and they suggest changing from Internet Explorer to Firefox as my browser. I dont really want to do this as I am not a computer buff and I can see all sorts of complications arising if I change to Fire Fox
View 1 Replies View RelatedI am getting the error message "internet explorer cannot display the webpage", my computer tells me i am connected to my wireless and that internet is available but it will not open any webpages, no matter which browser i try. I have disabled all firewalls and run diagnostics but it just tells me there is a problem with my router, despite the connection being perfect for other devices. My computer is relatively new and i'm sure its not a virus as i have run different anti-virus and malware softwares.
View 10 Replies View RelatedSome time ago while of facebook i clicked on a link supposedly forwarded from a friend and some sort of flash player virus file was downloaded to my laptop. I proceeded to run a MAlwarebyte scan of the laptop and deleted the downloaded file.However, since then I've been unable to connect to facebook via Internet Eplorer or Goggle Chrome, and I'm getting the message 'Oops! Internet Explorer.
View 1 Replies View Relatedlost favorites the one where you add website to favorites list
View 1 Replies View RelatedI cannot access one particular website - one that I regularly use. I have checked with other users - they can access the site.
This has been going on now for about 2-3 weeks and evertime I try to access the site I get the following message: "Internet Explorer cannot display the webpage"
