One Computer Can Reach Router But Not Internet?
Aug 16, 2012
Just got a brand new router this morning. Hooked it up to the modem, called Bright House and had it set to bridge mode, set up our wireless range extender and everything was fineMy dad's mac laptop was able to connect as well as my win7 desktop. When my brother tries to connect using his win7 laptop, though, he can connect to the router but not to the internet. He keeps getting limited access. He was able to connect and use a neighbor's wireless (but obviously we don't want to be doing that) so we know it's at least working
View 5 Replies
ADVERTISEMENT
Feb 26, 2013
We have a Comcast business class cable modem with a static IP address. There are two devices hardwired to it; a server and a Linksys WRT610N, The server is hardwired to it with port forwarding set for ports 21, 80 and 5900. It works perfectly and can be reached as intended by the outside world but not by our own network. Our Linksys WRT610N is hardwired to the modem. All computers on the wireless network see each other and can access the internet perfectly. So all seems well enough. BUT, no computer on our network can reach our server. Using the domain name or VNC connections from inside our system results in time outs and no connection.
View 12 Replies
View Related
Sep 1, 2012
I have got a problem with my LAN connection. I can't connect to the internet anymore and I can't reach my router. I rebooted my router several times, but that didn't work. I thought my network adapter was broken, so I bought a new one and reinstalled the driver, but it did not work. My router does recognize my computer though. When I tried to boot in safe mode with network opportunities, I was able to connect with my router and internet. I can't use System Restore as I don't have any restore points.
View 10 Replies
View Related
Dec 20, 2012
I am trying to setup a remote PC over a wireless access Point/Bridge to our FIOS router. Pic of setup is shown below. Everything is connected, there are no errors or security warnings shown in the ActionTec MI424 router. The RemotePC IP shows up as an Active Ethernet client in the Router config app. Moreover, I can run the connectivity test from the router app to the RemotePC and it passes that, and I can PING from the RemotePC to the Router. Yet I cannot reach the Internet from a Browser on the RemotePC (192.168.1.75). I am using (2) DLINK DAP-1522 Access Point/Bridge units and they have worked as expected. I set the Router log to list any blocked IP traffic as well, and it does not show anything being blocked from the RemotePC (192.168.1.75). So why can't I reach the Internet from the RemotePC? Seems like a gateway problem or I need to make some config changes in the Router.
View 2 Replies
View Related
Jun 4, 2012
Since some days we have a ASA5510, we connected it on a Windows Vista Laptop via ethernet cable (using at the back of the router the mgtm slot) and connect it on the network slot on the laptop. Laptop is getting IP addresses automatically.
Now we tried to reach the router in the Internet Explorer using: http://192.168.1.1, but we could not reach this site. When I try to ping the router via cmd and typing ping 192.168.1.1 I get answers.
For us it is very important to change the IP address of the router, as he will be used in a network with 10.xxx.xxx.xx addresses.
View 2 Replies
View Related
Sep 30, 2011
I have an ASA running 8.2(2).I am trying to get the network on the inside interface to be able to communicate through the outside interface and on to the internet.
View 18 Replies
View Related
May 30, 2011
Att says they are giving us 3mb/sec but we get 300kbps and speed tests from anywhere say we get 2.5 to 2.9 mb/sec yet even on unlimited bandwidth downloads(like torrents) with thousands of seeds connected and a few peers they never get faster than 340kb/sec.
View 9 Replies
View Related
Nov 30, 2012
I have been at this for the past few hours now. I just cannot get this device to pass through traffic to the internet. Here is the basic topology:
Default Gateway (ISP): 208.118.125.129/29
IP of outside int (e0/0): 208.118.125.130/29
ip of inside int (e0/1): 10.1.1.1/24
igniteCSGfw(config)# sho run
: Saved
:
ASA Version 8.0(4)
[Code].....
View 3 Replies
View Related
Mar 6, 2012
I have been configuring a cisco ASA 5520, everything is working fine but when i create an ACL:
-access-list OUT extended permit ip 172.16.x.x 255.255.255.0 any
-access-group OUT out interface outside
i added ports like www or 443 and it is not working to Internet access a router is before to my firewall connected to my headquater, i can see my private networks but i cannot able to reach Internet access,
View 3 Replies
View Related
Oct 10, 2011
We had setup a wired/wireless LAN using Cisco 881W router for one of our client. Wired lan works OK but we have issues with wireless. Users on wireless LAN can connect to the wireless network, but cannot browse the Internet. The wifi network does not give out an ip address to the client so client cannot get to the default gateway and Internet. Not sure what part of config does not work.
##### sh runn #####
881WiFi#sh run
Building configuration...
[Code].....
View 10 Replies
View Related
May 20, 2013
PCs --> SG500(4 vlans) --> rv042 --> Internet..vlan 1 is able to reach the internet..vlan 2-4 cannot reach the internet, but can reach vlan 1.
View 2 Replies
View Related
Apr 11, 2011
I'm having trouble setting up local LAN (reach inside network when VPN connected) and Internet access (reach internet when VPN connected) for my VPN CLients when they are connected to my VPN, They can connect, no problem there, but I can't reach any resources when connected. My pings time out, both to my inside network and to public ip adresses, the only thing I'm able to ping is my ASA (172.16.30.1), and I don't se any routes under "Status/Statistics/Route Details" in my cisco VPN Client (when connected).
Here's my config
ASA Version 8.0(3) !hostname KardesASAdomain-name default.domain.invalidenable password XXXX encryptednames!interface Vlan1 nameif inside security-level 100 ip address 172.16.30.1 255.255.255.0 !interface Vlan10
[Code]....
View 14 Replies
View Related
Apr 15, 2012
for the last 5 days or so, my internet was acting weird, disconnecting every 20 mins or so, i had an old linksys router, no clue on the modem, but all of it's about 7 years old, i got a replacement, Motorola SBG6580, my connection is somewhat better, but my ISP says they can't ping my router/modem
View 1 Replies
View Related
Mar 27, 2011
I have two desktop computers upstairs.The main pc has the Linksys G Router and the other pc is wireless with a network adapter. All works fine here.Downstairs and on the other side of the house, I use my laptop which is wireless to the network. I also have a 46" hidef tv hooked up to a blu ray player and also connected to the network with a wireless adapter. I use Netflix to stream movies and seem to be having a problem with the signal in this room, both on the tv and my laptop. I sometimes only have 2 bars on my laptop and frequently get disconnected to the internet. When I am streaming movies or tv series, I get frequent stops and starts.
I am guessing that the signal is just not strong enough to reach this far from the router. Would switching to an N router be better for streaming? Would another G router downstairs solve my problem?
View 4 Replies
View Related
Feb 25, 2012
Goal: extend the reach of my WiFi to multiple floors with keeping in the basement the DSL modem - Actiontech M1000 and Actiontech W1000. I have a Linksys Access Point and Linksys Router. I was told by CenturyLink (only allowed support for Actiontech) that the modem would need to be put in bridge mod that would disable the Actiontech W1000. Whereas I want to keep access in the basement and add coverage to upstairs.
being able to config the Linksys(s) or using DD-WRT operating system?
View -1 Replies
View Related
Mar 24, 2011
I am with Virgin media (UK) and have the 20mbps fiber optic connection. My area has recently been having problems with the broadband and Virgin has recently fixed these problems. However I used to get around 19mbps now that the problem is fixed my computer which is wired to the router gets about 0.4mbps downstream... However the 5 wireless computers all get 16mbps which is pretty good for them. Windows tells me that its a firewall issue and I currently can't use two programs, spotify and steam. They both have firewall issues, even if I turn off my firewall which is the windows one. I also have avast, and when I turn that off, still no good. I used OpenDNS, stopped using that flushed my DNS, that didnt work. I tried to optimize my computer settings, by changing various values in Regedit.All of this has done nothing. I should add that I have recently re-installed Windows 7 so on this fresh install it has never had decent internet speed. Which I thought was weird.. I have basically had these problems since the fresh install. All of my drivers are up to date.
View 10 Replies
View Related
Feb 8, 2013
I have a new EA4500 router and I cannot configure it to reach the 450 mbps that is supposed to get.
I have it configured as follows:
Dual Band- 2,4 and 5 GHz
2,4 in 20MHz only - 5 GHz in 40 MHz only
2,4 Mixed - 5 Ghz only N
WPA2 personal in both
Channel - automatic (both)
I have checked that the 5 Ghz network can only use 4 channels: 36, 40, 44, 48. Where are the channels up to 100 (or more)? How to get all the power of the router?
View 2 Replies
View Related
Jul 3, 2011
I have DSL set up in a home network. I want it to be used in my barn. The signal won't reach wireless though. I have 2 older wireless routers not being used - Lynksys wrt54gx4. Can I add two of these in the path to the barn to extend the signal? I would put one in the back of the house and one halfway to the barn in the pool house. ZCan these routers connect wirelessly to the home network?
View 3 Replies
View Related
Apr 13, 2013
-cisco 2651xm router
-cisco 1760 router
I have a cisco 2651xm router here at home, and at another remote location I have a cisco 1760 router, both are connected to the internet via adsl (WIC1-ADSL card).The problem is that from home I can't connect to the snmp-service on the 1760 router. I'm using a PC that's on the LAN of the 2651XM router, the blockage is in the 2651XM router, because if I swap it for a cheap plastic domestic router I can get snmp data from the 1760 router, and this is without any port forwarding in the domestic router. What config do I need on the 2651XM router so it will pass this traffic?
View 3 Replies
View Related
Apr 3, 2011
We are facing strange issue in our network. We have a remote branch which is connected to main branch using Leased Line. Remote branch is having Cisco 1700 Router. Every day in the morning time the remote router is unreachable. We are not able to reach (ping/telnet) the remote Router but able to reach L3 switch/ LAN behind this router. The users from remote branch is also not able to reach the local router but they are able to ping the Main branch.Users in the remote branch are not able to access any resources in the main branch during the issue.
During the issue, we have checked the remote branch router and found the CPU utilization of the Cisco 1700 router is very high (99%). If we run "Show process CPU" command (please find the attachment) specially IP input process is very high (97%).
View 1 Replies
View Related
Sep 26, 2012
I have one WET200 Wireless Brigde, connected to internet router... I can't use the infraestructure mode to broadcast the ssid to wireless cliente like laptops,
Only can use the ad hoc mode, but the wireless clients dont reach the internet from adhoc connection trought WET200...The datasheet saids "client only" for WET200, what is the diference between client only and Access Point mode? ??
View 2 Replies
View Related
May 15, 2012
I am trying to access [URL] with a Linksys E3000 router. A few days ago it was working fine, and between then and now I made no changes to my network, it just stopped working one day, I assumed the website was down but it turns out that I am able to access the website fine on other networks or via proxies. I also hooked up my computer directly to my modem and I was able to connect to the website fine, but when I try my wired connection to the router I am unable to connect, I have tried Google DNS without success. I know this is a problem with my router, not my modem or computer or ISP.
View 9 Replies
View Related
Mar 25, 2013
it might be good to point out first that this was never a problem before i began fixing a completely irrelevant problem (screen broke) with my laptop, which took around three weeks. i could at that time use the internet a couple of rooms away from the router just fine, but now it's a no-go. .
the model is WRT54G, and the serial number is CDFD1F9CJ507.
View 1 Replies
View Related
Mar 13, 2013
I have two computers. The first is a laptop running Vista and connects to the internet just fine. The second is a desktop running XP. I have a network adapter on the desktop and although it DOES find my network, I cannot get it to connect to the internet. I type in the correct passkey and it just goes on trying to connect, saying that it is acquiring a network address but no connection
View 1 Replies
View Related
Aug 7, 2012
I have a desktop and a laptop that are connected to my router but can't connect to the internet. One of our other desktops is working great. Another had the same issue and I fixed it using the "netsh int ip reset c:
[code]....
View 1 Replies
View Related
Nov 6, 2012
I have two computers and a laptop. How can I pick up the internet using one router? They are in separate rooms. I done it b4, but was done by someone else, who's not here. I don't remember how she done it, and I'm having a problem
View 1 Replies
View Related
Jan 31, 2012
Heres my set-up. In my office building, there's a computer company that gets bundled T1 lines and sends them out to the offices and we pay them. So, in my office i have a jack with a cat5e cable that goes to my router. The issue is that the router's internet light won't turn on.We're on our third router and second brand so I'm pretty sure the router's aren't the problem. If i connect my computer to the same cat5 cable I get the internet without an issue. But, when i put my router in there, it gets nothing. Not even a yellow light.
View 2 Replies
View Related
Jan 23, 2013
The university I attend doesn't allow modems and routers, but me and my roommates desperately need wifi for our devices, otherwise they are being wasted sitting around. today I set up an ad hoc connection on my roommates laptop, but he brings his laptop places and when he's out, we have no wifi. I have my desktop computer, and I can leave it on all the time and I never leave with it, so I'd love to set up wifi on it, since it will be so much more convenient.
I brought my router from home, and ive gotten it to send out my computer's internet connection, but it brings me to the school's registration page, which I can not use, since routers are not allowed. Is there a way to use my desktop's ethernet connection and send out that internet connection through my router (it also needs to bypass the school network, somehow fooling it that my router is my computer (im guessing))? I have 2 ethernet jacks on my computer by the way.
View 6 Replies
View Related
Jan 20, 2011
I have a laptop with an Intel Centrino 6300 Ultimate-N wireless card. With the previous firmware I was able to reach 300mbps while on the 5GHz band. Since I updated my E3000 to the latest firmware (1.0.04) I can only reach speeds of 144mbps. I have done a factory reset on the router and stll get the same result. Is there any way I can get it to reach 300mbps again with the current firmware?
Also, yes I have uninstalled / updated the driver software for my wireless card. I have also changed the appropriate settings for the 5GHz band. (40MHz channel width, using WPA2 encryption)
View 9 Replies
View Related
Aug 30, 2011
I recently bought a Motorola SurfBoard SB5101U Cable Modem and a MediaLink Wireless-N Router (Model NO.: MWN-WAPR150N). Just yesterday, Charter Internet hooked up the internet for my apartment. It works just fine when I only have the modem connected, but when I add the router, the internet disconnects.I have tried changing the router's IP.Here's the ipconfig /all for only the modem:
Microsoft Windows [Version 6.1.7600]
Copyright (c) 2009 Microsoft Corporation. All rights reserved.
C:UsersMatthew>ipconfig /all
Windows IP Configuration
Host Name . . . . . . . . . . . . : Matthew-PC
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Hybrid
IP Routing Enabled. . . . . . . . : No
[code]....
View 4 Replies
View Related
Aug 29, 2011
I have a windows 7 computer that was connected wirelessly to my router and internet worked fine. One day i woke up and the internet would not work. The computer is still connected to the router but no internet access.There are other computers on the network that connect fine.I have also tried connecting my computer directly to the modem and still no internet.Running windows diagnositc tells me there is no default gateway available. Ive cycled the modem and router probably a million times and even taking the pc to another house to try on a different router and still no go.
View 5 Replies
View Related
Sep 1, 2012
We have a Belkin N300 router connected to the internet through a cable modem(Comcast). Up until yesterday it worked fine for all the devices connected. But now whenever my brother's laptop connects(wireless) to the network it makes the router lose connection to the internet so all the devices connected lose connection, too obviously. Everything shows connected to the router, but the router releases it's DHCP whenever he connects. As soon as he turns off his wifi or manually chooses to disconnect... the internet fires right back up within a minute or so. We have no idea what is causing this. We did notice that his laptop was trying to connect with IPV6 while everything else was using IPV4
View 2 Replies
View Related
Apr 25, 2011
Just purchased a new computer. Old one has a Lynksis wireless router. Tried to connect the old one and can't get internet.
View 1 Replies
View Related
