Wireless :: Low Incoming Mi-Fi Signal From Verizon?
Feb 26, 2011My MiFi signal is at -117dbm and can only get dial-up. Spring rain flood the river for up to three months, so a land line is not viable.
View 1 RepliesMy MiFi signal is at -117dbm and can only get dial-up. Spring rain flood the river for up to three months, so a land line is not viable.
View 1 RepliesI need a router that can receive the signal from my Verizon 4G Jetpack so that I can send signal to items that require cat5 cable.Can the WES610N do that or is there one that can?
View 1 Replies View RelatedWhat I wouldn't give for Comcast.Is there any way to speed up this thing? It's 3G MIFI. Is 4G that much better,nor is it dependent on the signal?
View 3 Replies View RelatedI have a wifi signal set up in my home but my studio 200m away gets no signal. I bought a repeater on ebay but it's still too far to pick up the signal. I can't place the repeater between the two structures due to lack of an electrical outlet. If I get an antenna for the repeater (Linksys WRT54GS with W-DRT installed) do I simply attach it where the existing antennas are on the Linksys repeater or is it more complicated than that? It seems to me those antenna ports are for sending a signal not receiving a signal.
View 2 Replies View RelatedI have Comcast and my modem is indicating (blue light ) that my signal incoming is weak but my out going is fine. I tried resetting the modem ...no change . Is my problem with the modem or Comcast ?
View 2 Replies View RelatedHow to hook up a seperate wireless router instead of using the fios router. I want to get a n-signal in my house. Would like an answer or a link to another thread.
View 1 Replies View RelatedI can not connect my new Mac Book Pro to Verizon wireless. I have no trouble connecting my old Mac to it, so what is the problem with the new Mac. I have to use the ethernet wire which is a problem when I am so use to wireless.
View 4 Replies View RelatedI have a wireless network at home with a wired internet connection. I want to move the network to an RV and use my Verizon 4g MIFI box as the internet connection. THe new network will have the MIFI, 2 computers one wireless printer and one wired Ethernet printer and about 6TB of NAS connected via Ethernet.
View 1 Replies View RelatedMy wife had a differant cell carrier before we got married and we have tried to change the caller Id thru verzion wireless and we cant seem to get any answers on how to change it. Whatcan we do.
View 2 Replies View RelatedI recently bought a new Cisco/Linksys E1200 router, but the incoming log feature does not work. Outbound and Security logs work fine, but unsolicited inbound TCP packets (that are dropped) are not displayed. The inbound log is empty.
View 6 Replies View RelatedMy incoming log is FILLED with incoming IP's and they are all connected to a port starting with 64-. I've tried changing my wireless internet with different passwords multiple times and I have upgraded my firmware.
View 1 Replies View Relatedcan't get hp printer to connect Verizon wireless router
View 1 Replies View RelatedHow can I find my wireless security key on my Verizon router
View 2 Replies View Relatedmy WRT54G has been configured to block any and all incoming connections.continue to have disabled all port forwarding, port triggering, the DMZ, and QoS, via the applicable tabs under the [Applications & Gaming] Panel. The WRT54G continues to be configured to operate as a Gateway.No static routes are defined. The routing table show four entries, none of which are remarkable or match in anyway the partial address identified above.So I am under the impression that my WRT54G should be ignoring everything from the WAN-side.Even pinging the WAN-side of my router from the outside internet times out.My WRT54G ver 6 is at firmware level 1.02.8, which, as far as I can tell is the latest issued by Cisco.I am completely perplexed how such a connection is being established, and do not know if it is or has the potential of causing any harm. My own research indicates port 520 is typically used for RIP protocol, but I have almost zero knowledge of such.
View 9 Replies View RelatedHave been using my laptop on my wireless connection for a couple of years. All of a sudden, I can't access the internet with it. My wireless icon in the corner says Wireless Network connection connected and the strength is very good. I tried to let the computer obtain the ip address and the dns automatically and have put the numbers in manually. Neither has worked. The laptop is a Toshiba Satellite running Windows XP. The router is a Verizon Wireless Actiontec Ml1424-WR.
View 14 Replies View RelatedI would like to know if I have wifi connect with my verizon internet.
View 2 Replies View RelatedSo, I bought an E4200 today. I don't know if it's v1 or 2. The box doesn't say v2, so I'm assuming it's v1.
I'm trying to set it up and I have the most recent version of the Mac OS operating system (10.8 Mountain Lion), so the setup CD is not compatible. I'm trying to do a manual set up and it seems that step 1 is to go to 192.168.1.1, which is the same IP that my FIOS router uses, so I go straight there instead of to the E4200.
Has anyone else been able to make this thing work with Mountain Lion and FIOS router?
i am using verizon fios. It's pretty fast, in fact I just did a speedtest and here is the result.But I always want more. My laptop has Intel 6300, which supports up to 450Mb. But the Actiontec MI424WR only has 54Mb. It has nice features, but it uses MoCA and connects over coaxial cables, making it unnecessarily harder to use my own router. So I searched online and found tut about how to set the actiontec as a bridge and use your own router.
1) Wouldn't that lower the speed of the router of my choice? Say if I get a 450Mb router, but I need to connect it through the port on the Actiontec, which iirc is only 100Mb. Shouldn't that mean that the new router is forced to operate at only 100Mb max?
2) What is FIOS' top speed? I'm not even sure if it can go up to 450Mb.
3)I have no problems with this Actiontec currently, the only thing I'm looking for is more speed. Has anyone tried calling Verizon and see if they could switch the connection from coax to CAT5?
My firewall outpost detected incoming connections on port 80 and blocked them.I think that the router must block incoming connections on port 80, right? But it does not.
[URL]
I am trying to use my WRT120n as access device for an IP Centrex service using SIP protocol. My SIP phone is located right behind the router.My problem is sometimes the router is dropping incoming calls because signalling packets are fragmented at IP level. So I cannot receive those calls.Is there a way to enable the router to accept these packets?
View 9 Replies View RelatedI recently downloaded Deluge and while I can download torrents without a problem, I always have the "NO INCOMING CONNECTIONS' warning. I've tried single port forwarding, port range forwarding, turning UPnP off and on ... in short I've tried a lot of stuff and the only thing that clears the message is to remove the router out of the equation. The message disappears as soon as I connect the pc directly to the modem.
View 3 Replies View RelatedI have a WRT160N router (firmware 1.53.0) that is connected to my broadband. It is giving me problems with VOIP/SIP Traffic.My SIP client connects fine and makes calls, but I cant hear any incoming/outgoing sound. The SIP client works fine when connected directly to broadband. I tried DMZ and that didn't work. Disabled SPI and that didn't work too.
View 2 Replies View RelatedHow do I install a D-Link Wireless router, DIR 655 to the Verizon Fios internet. I have tried different ways but cant get it to work.
View 13 Replies View RelatedI had connected my WRT54G to my wireless router by disableing the DHCP on WRT54G. It worked great until recently. Now I upgraded my linksys box to the latest and greatest AC1750. Iwant to use complete features of AC1750 router. So to do this, How do I connect Verizon Model(its modem+wireless router) to this Router and have AC1750 drive everything.
View 1 Replies View RelatedI bought the Linksys E1200 for it's wireless N and the guest account. set up my new Linksys E1200 router to use for wireless N access rather that my Verizon Fios provided Actiontec (model M4124-WR Rev.C) which is only wireless G, and so that I can use the guest account. I have an ethernet cable running from one of the 4 ethernet ports on the E1200 to one of the 4 LAN ports on the Actiontec. I have the wireless turned off on the Actiontec, and have the E1200 set as 192.168.1.200.My wireless N signal seems to be working fine from the E1200, and I was able to turn on the guest account on the E1200 and "connect" to it on my iPhone 4, but then when I open Safari I can not connect to the internet.
View 9 Replies View RelatedI've been fighting with my E2500 since I got it back in June with lag, dropped connections, etc. It's a bit intermittent but can hang around for hours at a time when it kicks in. Restarts but the issue always comes back. Most noticeable while gaming online or on a VOIP program such as Team Speak. Generally when it happens If I'm monitoring my Team Speak connection the incoming packet loss shoots up between 20-30%, starting to drop out every other word or so. No out going packet loss. The connection drops are random between computers (I have one mac and one pc in the house) where one will be fine and the other wont, or when the whole system will stay connected and drop all transfer. In the case of this last one it's not my ISP's connection as any streaming happening between one computer and an Apple TV device will also cease. I've also swapped back to my old router (an older model linksys) and all problems have stopped. Fully rebooted and reconfigured the router about 3 or 4 times and am on the latest version of firmware (1.0.003). It was much worse on 1.0.002 but still very noticeable on 003. Also no difference with a different wireless adapter. I've tried the chat technical support but all they did was take 45 minutes to tell me how to reboot my router after telling them I already had.
View 1 Replies View RelatedHave a few of these routers internally as well as at various clients. The incoming and outgoing logs show up blank, even when there are 10-20 computers using the Internet and I know there is traffic being generated. DHCP and security logging still works fine. I also have a few E1200s on the latest firmware that are logging just fine... I'm just having issues with the E2500s.
View 6 Replies View RelatedI have verizon fios internet and a wireless home network with verizon internet security and I want to ghange my IP adress on my laptop
View 6 Replies View RelatedThe laptop identifies the Verizon-890L-B9CE as a wireless network, but will not connect. I don't know how to upgrade drivers without connecting to the internet.
View 2 Replies View RelatedI have a new Linksys E2100 that was working well with an old Verizon modem. Then recently that modem gave up the ghost and I was issued another one (Westel Model 6100G). I have no problems with internet connectivity when connecting directly from my harddrive to the Verizon modem. I am also not having trouble connecting to the Linksys routher as I am able to see my wireless connection with no problem. However, when I try to set up the connnection with the E2100 in the loop (yes, it's connected correctly) I no longer have internet access.I tried de-installing and re-installing the Linksys software (thinking maybe there was some new configuration that would be auto-detected with a new set-up), but this didn't work. I suspect that if the problem is with my Linksys router and not with my Verizon modem that there might be something that could be done to reconfigure something manually but I do not know enough about connections and wireless systems to trust myself not to mess something up.
View 1 Replies View RelatedI'm trying to configure my Linksys WRT54G2 router as my primary router and have my Actiontec just used for the my FIOS TV (eg VOD, widgets, guide). I've googled many HOWTO's on how to do this but I just cant get it working. So setup up will look like this in th end:
(DHCP Server)
(Wireless) (Only TV)
Internet >> WRT54G2 >>> Actiontec >>> PC/Laptops
|
FIOS TV -------------
how to set this up? I understand that the STB devices configured on my Actiontec routers is actually my TV receiver and currently configured with the following IP addresses:
IP-STB1:Connection Type: Coax
192.168.1.100
IP-STB2:Connection Type: Coax
192.168.1.101
IP-STB3:Connection Type: Coax
192.168.1.103
I have COAX Ethernet setup so everything is going through ethernet per Verizon phone tech.
Actiontec Firmware Version: 4.0.16.1.56.0.10.11.6
WRT54G2 = DDWRT firmware
I've tried the following HOWTO's to no avail.[URL]
I have a new Linksys E2100 that was working well with an old Verizon modem. Then recently that modem gave up the ghost and I was issued another one (Westel Model 6100G). I have no problems with internet connectivity when connecting directly from my harddrive to the Verizon modem. I am also not having trouble connecting to the Linksys routher as I am able to see my wireless connection with no problem. However, when I try to set up the connnection with the E2100 in the loop (yes, it's connected correctly) I no longer have internet access.
I tried de-installing and re-installing the Linksys software (thinking maybe there was some new configuration that would be auto-detected with a new set-up), but this didn't work. I suspect that if the problem is with my Linksys router and not with my Verizon modem that there might be something that could be done to reconfigure something manually but I do not know enough about connections and wireless systems to trust myself not to mess something up.
At this point I'm assuming it's a Linksys issue since I know that my Verizon modem can connect me to the internet, so works properly. Is there some known incompatibility with this Linksys model and the Westell 6100G modem?
Stop wireless printer connect verizon card. I have a new wireless laptop with XP and a new HP wireless printer and a Verizon card. My printer keeps connecting through my Verizon card and it is costing me lots of $. Verizon says no way.How to I tell my new Windows XP laptop to NOT connect my printer using the Verizon card? Tried everything. Want it to connect to Ethernet.
View 2 Replies View Related