Have a few of these routers internally as well as at various clients. The incoming and outgoing logs show up blank, even when there are 10-20 computers using the Internet and I know there is traffic being generated. DHCP and security logging still works fine. I also have a few E1200s on the latest firmware that are logging just fine... I'm just having issues with the E2500s.
View 6 RepliesI have a WRT160N router (firmware 1.53.0) that is connected to my broadband. It is giving me problems with VOIP/SIP Traffic.My SIP client connects fine and makes calls, but I cant hear any incoming/outgoing sound. The SIP client works fine when connected directly to broadband. I tried DMZ and that didn't work. Disabled SPI and that didn't work too.
View 2 Replies View RelatedI went a bought a brand new model V4.3. I had trouble installing it right from the word GO, but I did successfully get that acomplished, how ever one of the important features "logging of incoming and out going ip" won't work at all. I tried deleting the old logview.exe and rebooting everything, then installed the "new" logviewer.exe. Well absolutely nothing happens. I have double and triple checked the setting in the router...logging is turned on, the computer which has the logviewer.exe installed is the confirmed network ip i.e. 192.168.1.101 and I can and do access the internet and all other computers on the network from that computer.
View 9 Replies View RelatedI've been fighting with my E2500 since I got it back in June with lag, dropped connections, etc. It's a bit intermittent but can hang around for hours at a time when it kicks in. Restarts but the issue always comes back. Most noticeable while gaming online or on a VOIP program such as Team Speak. Generally when it happens If I'm monitoring my Team Speak connection the incoming packet loss shoots up between 20-30%, starting to drop out every other word or so. No out going packet loss. The connection drops are random between computers (I have one mac and one pc in the house) where one will be fine and the other wont, or when the whole system will stay connected and drop all transfer. In the case of this last one it's not my ISP's connection as any streaming happening between one computer and an Apple TV device will also cease. I've also swapped back to my old router (an older model linksys) and all problems have stopped. Fully rebooted and reconfigured the router about 3 or 4 times and am on the latest version of firmware (1.0.003). It was much worse on 1.0.002 but still very noticeable on 003. Also no difference with a different wireless adapter. I've tried the chat technical support but all they did was take 45 minutes to tell me how to reboot my router after telling them I already had.
View 1 Replies View Relatedhow to update Cisco FIrmware ... it is like brick....no responce from router.. i have tried With Linksys TFTP,, just coppying successful and not working..
View 1 Replies View RelatedI have an E2500 router, running the latest firmware 1.0.7.
Where or how can i see which is the machine (mac or ip) that is doing more traffic, in fact i would like to see what computers are doing how much traffic.
This is a default on most routers, its so weird to not been able to find this on a Cisco product.
Notified of new firmware for my router. Tried to install. Downloaded fine but will not install. Keeps saying error but not what kind, how to fix, not anything.
View 1 Replies View RelatedI have a licensing server. Other computers need to turn on a program, they send a message to the licensing server, and it responds that they have permission to run.Until today the licensing server was plugged into its own ethernet wall socket and configured with a static IP address. Today I put a router into that wall socket and now the server's plugged into the router.The router (WRT-54G) was set to the static IP - and now the internet on its network works. I set all ports to be forwarded to the server's internal IP address - and now my programs can detect and ping it. But now the server won't send back permissions to use licensed software, or even reply with a list of the software which it can license.
View 1 Replies View RelatedI have a CISCO 1841 ROUTER and sins short our internet speed has decreased dramatically , it does not happens all the time , so I am sure it is not the ROUTER.I have put a small router (CISCO WRT 610N) and it was the same.When I look to the UP and DOWNLOAD GRAPH from my ISP , I see really BIG peeks.
View 2 Replies View RelatedI'm having a difficult time getting the logging mechanism to work on my DD-WRT Router. I've gone through all the accepted methods for enabling logging: Seems there're others having issues too, but no answers: URLS
Specs:
Router Model WZR-HP-AG300H
Firmware Version DD-WRT v24SP2-MULTI (11/20/11) std - build 17798
I investigated a little further on the router. I enabled ssh, logged in, and found the log the firewall reports too. So I know the logging is performed, it's just not linked up to the incoming/outgoing log web page. Here's the log:
Using username "root".
DD-WRT v24-sp2 std (c) 2011 NewMedia-NET GmbH
Release: 11/20/11 (SVN revision: 17798)
BusyBox v1.19.2 (2011-11-20 17:24:36 CET) built-in shell (ash)
Enter 'help' for a list of built-in commands.
root@rome:~# cd /tmp/var/
root@rome:/tmp/var# ls
lib lock log openser run snmp spool tmp
root@rome:/tmp/var# cd log
root@rome:/tmp/var/log# ls
[Code]....
We have a Cisco ASA 5520 and im looking for a way to monitor largest outgoing and incoming traffic per ip in real time so to know which of my internal computers are using the most of our Internet Line. Is there a way to this through ADSM ? We use version 6.3.
View 1 Replies View RelatedCox Communications comes into the house over an RG6 cable to a a 2-way splitter, one leg amplified for TVs, the other leg straight to a Linksys BEFCMU10 cable modem for internet access. The modem is connected to a Linksys WRT54GL router for the PCs.
BEFCMU10: Hardware Version = v1.0; Software Version = v2.0.2.0.7
WRT54GL: Hardware Version = v1.1; Software Version = v4.30.11
The WRT54GL firmware is stock Linksys code which can log addresses but not errors (as far as I can determine). Is there a WRT54GL firmware lump I can flash into my device that logs network errors it encounters between itself and the BEFCMU10 and that it might be informed of by the BEFCMU10 in its dealings with Cox? I'd want to read that log through the WRT's web UI; ideally I'd want to upload it to my PC. If the firmware logs errors on/from its other ports as well.I need it to sort out what Cox tells me are numerous "modem resets" that they're seeing at their end.The resets are the apparent cause of big slowdowns, we see on our end.By the way, yesterday a Cox tech replaced the 2-way splitter and the short coax from it to my modem, then measured signal strength and said it was in the middle of the "okay range".
I have tried to upgrade from 2.0.2.1 ever since 2.0.3.3 was released back in July. The firmware image file has remained the same, so I don't think they've ever changed it from the original July release.The download and installation go fine, I even reset to factory defaults. The problem is that several menu selections are broken, and don't allow you to save your choices, i.e, you can't even rename your SSID. You can type it in a Apply, but the fields just reset. I figured this would be fixed with a minor update to 2.0.3.3, but we are now several months since original release and nothing has changed. I have tried this firmware at least three times now. I have not bothered lately, because I don't want to waste another 30 minutes trying it and reverting back to 2.0.2.1 if this newest firmware is not going to work.
View 3 Replies View RelatedGenerally works on wireless Guest network. Only allows one IP on wired or wireless. Using latest cloud firmware.
Instead of giving out the 192.168.1.100-150 as configured. It will give out from the cable modem (i think) 192.168.100.x
Seting static IP on computers works fine.
I recently "uninstalled" DD-WRT from my router and tried to install the actual firmware for the router, so I went to this page [URL] WRT54G and select version 5. My router is really version 5.1 but I read on this forum that this router works with version 5 so I downloaded it and installed it.
However, this is how my admin page looks like,
And I can't do anything at all. Is there a fix for this? Is there an actual version 5.1 firmware? Or must I switch to a different, proper router?
I have a problem with e4200. Buy it about 1 month ago with firmware 1002, link to ISP by simple LAN with DHCP IP lising without any method of identification like PPOE or other. 2 days ago tech support of ISP call me nd say that my router send bad packet to their hardware and all LAN collups include DNS server. I disconnect all device from router but same thing happened. I update firware to 1003 but this action work for 1 day, and again tech support call me. What wrong with router or may be with ISP technician's hands?
View 3 Replies View RelatedI installed firmware version 1.2.0.9 a couple weeks ago after seeing in the release notes that the port forwarding bug where clients would get 'no route to host' was resolved (one of the original posts found here:URL
After installing the firmware and confirming it's running I've seen no improvement. I still must reboot my router 2-3 times daily so clients can access the ports that are defined in the port forwarding module.
I know that WRTP54G is a voip device, but it is router as well and my problem is related to routing part.I cannot access public internet servers with IP in subnet 2.0.0.0 / 8 and 1.0.0.0 / 8. In the 2.0.0.0 / 8 subnet are some akamai cdn servers (yes, the fbcdn .After some time I've found, that routing table in wrtp54g contains also entries:
1.0.0.0 0.0.0.0 255.0.0.0 LAN&Wireless2.0.0.0 0.0.0.0 255.0.0.0 LAN&Wireless
which cannot be deleted. It looks like someone wanted to filter dark space when the router was developed.Is there any way, to get rid of it? I've restored to factory defaults, no change. Firmware version is 3.1.27.ETSI
I recently bought a new Cisco/Linksys E1200 router, but the incoming log feature does not work. Outbound and Security logs work fine, but unsolicited inbound TCP packets (that are dropped) are not displayed. The inbound log is empty.
View 6 Replies View RelatedMy incoming log is FILLED with incoming IP's and they are all connected to a port starting with 64-. I've tried changing my wireless internet with different passwords multiple times and I have upgraded my firmware.
View 1 Replies View Relatedmy WRT54G has been configured to block any and all incoming connections.continue to have disabled all port forwarding, port triggering, the DMZ, and QoS, via the applicable tabs under the [Applications & Gaming] Panel. The WRT54G continues to be configured to operate as a Gateway.No static routes are defined. The routing table show four entries, none of which are remarkable or match in anyway the partial address identified above.So I am under the impression that my WRT54G should be ignoring everything from the WAN-side.Even pinging the WAN-side of my router from the outside internet times out.My WRT54G ver 6 is at firmware level 1.02.8, which, as far as I can tell is the latest issued by Cisco.I am completely perplexed how such a connection is being established, and do not know if it is or has the potential of causing any harm. My own research indicates port 520 is typically used for RIP protocol, but I have almost zero knowledge of such.
View 9 Replies View RelatedMy firewall outpost detected incoming connections on port 80 and blocked them.I think that the router must block incoming connections on port 80, right? But it does not.
[URL]
I am trying to use my WRT120n as access device for an IP Centrex service using SIP protocol. My SIP phone is located right behind the router.My problem is sometimes the router is dropping incoming calls because signalling packets are fragmented at IP level. So I cannot receive those calls.Is there a way to enable the router to accept these packets?
View 9 Replies View RelatedI recently downloaded Deluge and while I can download torrents without a problem, I always have the "NO INCOMING CONNECTIONS' warning. I've tried single port forwarding, port range forwarding, turning UPnP off and on ... in short I've tried a lot of stuff and the only thing that clears the message is to remove the router out of the equation. The message disappears as soon as I connect the pc directly to the modem.
View 3 Replies View RelatedI am using firmware version 1.0.04 build 6.I am having a few issues viewing the log; the incoming, outgoing and security logs are completely blank, the DHCP log is the only one populated.Even though it's populated, the time stamp displays the date as Jan 1 1970, time appears fine if I use UDT (Time is set to Mountain), the Router Status correctly displays the current time for my location.I vaguely remember the other logs worked with a previous firmware 1.0.03? Don't recall if the Date Time stamp was working correctly.
View 2 Replies View RelatedI'm thinking of switching to another ISP which is faster and cheaper than who I'm currently with. Only problem is they have data caps. Any way to log inbound/outbound traffic usage with this router so that I can make sure I'm not going to hit monthly limits?
View 5 Replies View RelatedI am trying to configure my connectivity settings on my E6500. I enter 192.168.1.1 and the logon screen comes up. I have tried logging in with my user name and password and also disconnecting the internet and logging in the router password. After I log in, 98% of the time it says Router Not Found You are not connected to your router. It is funny that it is telling me this since this webpage is provided from the router since i have unplugged the internet. Even with the internet on, it does the same thing.
The times it does load the homepage of the router, I click on connectivity and when it does come up, the page is just blank with Ok, Cancel, and Apply buttons.I have done a reset on the router and reconfigured it with the CD and tried all the above again and same results.
I don't remember this being a problem when i first setup the router, it appears that a new firmware was automatically installed. I do not see any info on this being a known issue with the latest firmware.
Is there a more detailed log or information from the router?I'm still having massive network variations, even with everything wire connected.
View 1 Replies View RelatedI'm currently setting the MAC address filtering for my Linksys E2500 router. I have about 20 devices which i'm allowing to access my router, so i keyed in the MAC addresses into the config page and save setting. But only 16 addresses are registered, the rest refused to register no matter how many times i key in, it just reset back to 00:00:00:00:00:00 after i click on save setting.
View 4 Replies View RelatedI previously entered in settings for the "Static DNS" 1 through 3 (using ip addresses from OpenDNS and one from Google DNS).
I want to remove these so the router reverts to using the DNS allocated to it by the ADSL modem (which will likely be the IP of the modem, which then forwards the requests to the DNS from the ISP).But I can't clear the Static DNS settings. I have to put in 0.0.0.0 but the last zero is not accessed. I get the error: The value is out of range [1 - 254].So I end up with 0.0.0.1 and then all Internet access is lost on the computers because they are being given a bad DNS IP.
How can I reset the static DNS ip address back to 0.0.0.0 ?
I am trying to connect to a new VPN using my E2500 router. As soon as I connect, the connection breaks.
View 1 Replies View Relatedi buy a new e2500 from staples. but when i try to register the product. it shows me "Serial Number you entered is invalid.". i am sure i choose the right product and number to register.. so is that mean some one used it..
View 3 Replies View RelatedI want to add my E2500 as a second wireless router to cover my entire house.I have a Motorola Surfboard SBG6580 cable modem (Time-Warner) at one end of the house.I added via powerline Ethernet connection a new E2500 wireless router at the other end of the house.The E2500 set-up with all defaults and has the same SSID and Password as the Surfboard cable modem.It seems to work OK, but I wonder about network confusion/interference.Do I have to configure the E2500 in some manner to allow seamless roaming of my wireless devices (iPad, Cell Phones, Netbook)?I had an RE1000 with just the Surfboard, but it did not quite do the trick, and does not like both routers connected at either end.
View 9 Replies View Related