How To Set Up Verizon Router For Two PS3s
Nov 16, 2011
I have verizon fios 35/35 and i am told i have to run there modem/router combo for the tv ge to work properly. I have two ps3's hard wierd to the provided router, and one laptop running wirelessly. The problem is this: when the two ps3's are playing call of duty at the same time, whichever ps3 that was turned on first shows it has an open NAT type and whichever ps3 is turned on second shows a moderate NAT type (this makes them unable to play together online). I am familiar with prot forwarding but not sure if i can do this for two separate ps3's. So i hard wired a second router to the old router and ran everything out of the new one. Only now they are both a moderate NAT type. Ive played around with the UPnP settings, but dont really know what else i can do.
View 1 Replies
ADVERTISEMENT
Nov 25, 2011
I have not internet in my area ( rural ). I currently use Hughes net ( Poor )I just bought and loaded software for a verzon modem card.How to I hook up a router to the system?
View 2 Replies
View Related
Feb 20, 2013
How to hook up a seperate wireless router instead of using the fios router. I want to get a n-signal in my house. Would like an answer or a link to another thread.
View 1 Replies
View Related
May 21, 2012
I have a wireless network at home with a wired internet connection. I want to move the network to an RV and use my Verizon 4g MIFI box as the internet connection. THe new network will have the MIFI, 2 computers one wireless printer and one wired Ethernet printer and about 6TB of NAS connected via Ethernet.
View 1 Replies
View Related
Apr 11, 2012
I tried connecting this on my own and it worked for hard wired Internet service but not for wireless service. Too many cables and boxes attached. I have a vz router, then some other box, and a battery back up.
View 2 Replies
View Related
Apr 6, 2012
The standard Verizon router doesn't have Wireless N capability, so I got the WRT600N (first floor) a while back and connected it to one of the ports on the Verizon router (basement). I have the wireless turned off on Verizon router. My problem is that anything connecting to the WRT600N has extremely intermittent connectivity.
View 1 Replies
View Related
Jan 20, 2013
I connected EA6500 internet port to actiontec router provided by Verizon fios. I don't have any other way to connect as FIOS connection is coax to actiontec modem. I must take a drop from actiontec to internet port on EA6500.
With that said, I can't get EA6500 to work, it keeps saying no internet. The only way I can get it to work is when I set it to bridge mode. This makes my EA6500 a dumb switch/access point. I didn't spend $200 for a switch. I need to use advanced features offered by this router but I can't until this problem is fixed. I made sure I am running latest version of firmware (1.1.28.146856).
I have reset my fios router as well as ea6500 to factory defaults multiple times.
View 9 Replies
View Related
Mar 24, 2011
I use Bit Torrent to trade Grateful Dead concert recordings (all legit trading). I have Verizon DSL, a Westell 6100G Modem and a Linksys WRT 160N V2 Router. The Modem is located at 192.168.1.1 and the Router at 192.168.2.1. In the router setup page I have properly forwarded and triggered my ports. However, when I visit my torrent site, it tells me that I am firewalled or "NAT". I used to have the Linksys WRT54G Router and it was configured to PPPoE and everything worked fine. One day I did a firmware upgrade on the router and it would no longer connect to the internet. I switched ti to Automatic Configuration - DHCP and it connected, but performance was slow and this NAT issue began. I eventually got the new router and I have the same problem. If I set it to PPPoE, put in he username and password, I lose my internet connection. If set to Automatic Config - DHCP it works, but, again, "NAT".
Verizon told me that this newer modem self configures itself as PPPoE and there is no need to set the router to PPPoE but I can't seem to get these ports forwarded or get around this NAT issue. It is causing a significant loss of performance and while torrenting I can not connect to others, meaning I can not share what I have downloaded (the torrent client won;t upload). I have been screwing with this for months and have spent endless hours on the phone with Verizon - Linksys says my router is out of warranty so they want $39.95/month for tech support.I have been working with the tech support team on my torrent website and they can't get it figured out either.
View 2 Replies
View Related
Jul 26, 2011
As part of our ongoing enhancements to the online customer experience, Verizon continues to ensure security for our Internet customers. As a result of this ongoing effort, Verizon Online is making modifications to the Internet access provided to you. These modifications will occur on August 21, 2011. For security reasons, Verizon will no longer allow users to FTP their HTML files to the personal web site Verizon offers. Verizon recommends that current FTP users download their files prior to August 21, 2011 to prevent any data loss. "
View 3 Replies
View Related
Jan 18, 2013
can't get hp printer to connect Verizon wireless router
View 1 Replies
View Related
Apr 30, 2012
My husband and I just got a Verizon MIFI Jetpack. My computer has an internal wireless connection so we had no problem getting it hooked to mine, however, my husband is trying to hook on with a Belkin router. The router appears to be reading that the Verizon service is there but when he goes to connect to the internet it says it won't connect. We've tried resetting the router and restarting his computer. It did not fix the problem.
View 3 Replies
View Related
Jun 1, 2011
How can I find my wireless security key on my Verizon router
View 2 Replies
View Related
Apr 5, 2011
I have a Netgear wnr2000 v3 wirless router. Im trying to get the Verizon Samsung Network extender to work on it. I am using a ethernet cable not wireless. When i go into the Netgear's Control panel and click attached devices it does not show it and it wont work. I called verizon and they gave me port numbers to put it in the port fowarding but you need the IP address which i dont know
View 3 Replies
View Related
Oct 18, 2011
Okay, I know there has to be something I'm doing wrong because 3 months ago I set up the same modem & router to work. Being the idiot I am, I reset my router to change the password (dumb I know) and now the router can't pass the internet signal from the modem on! 1. I've set the modem to bride/bridge and unchecked the private LAN box.release/renewed IP2. Used the modem's MAC address in the router. . Made sure DHCP set to obtain automatically.4. Reset, restarted seperately multiple times.It looks like from the status page that the router is obtaining an IP but it won't connect to the internet
View 2 Replies
View Related
Oct 23, 2012
I have a MI424WR for my Verizon Fios connection. The router is located downstairs, and I don't get Wifi in my bedroom upstairs. Is it possible to connect another WIFI router by ethernet to the MI424WR? Is there anyway where I can do it without the two router's wifi signals fighting each other? Is there a specific kind of router I should be looking for?
View 1 Replies
View Related
Nov 28, 2011
I need to make this connection to be able to operate a Enphase Solar electricity inverter reporting system.
View 1 Replies
View Related
Jan 7, 2012
Set up a repeater for their house to get a better signal in locations farther from their main router that is a Verizon Actiontec M1424-WR Rev. C. I am recommending that he get an old router (Linksys wrt54GL or E2000) that I can convert into a repeater with DDWRT firmware as a cheap solution, or with a purpose built Netgear or Linksys range extender repeater as a more $ solution.
View 4 Replies
View Related
Apr 14, 2012
How do I get my verizon usb mobile modem to work with my wireless router? My router is a Belkin N150.
View 1 Replies
View Related
Oct 26, 2011
I use both Gigabit LAN and "N" class WIFI through my WNDR3700 to connect to my Network. Can I use a Verizon MIFI4510L to connect to the Internet?
View 1 Replies
View Related
Aug 18, 2011
I have never setup a GW to GW VPN with a FIOS connection. I have done it with DSL and cable without any problems.
View 1 Replies
View Related
Jan 25, 2011
Can't connect DAP-1522 to my Verizon Fios Router
Went through the setup on the DAP-1522. Selected my Verizon FIOS wireless network and entered the WEP key. Everything looks ok on the status page - except Status: Disconnected
Reset/restarted and reconfigured DAP-1522 several times - same result. Can't get it to connect.
View 1 Replies
View Related
Dec 13, 2012
So, I bought an E4200 today. I don't know if it's v1 or 2. The box doesn't say v2, so I'm assuming it's v1.
I'm trying to set it up and I have the most recent version of the Mac OS operating system (10.8 Mountain Lion), so the setup CD is not compatible. I'm trying to do a manual set up and it seems that step 1 is to go to 192.168.1.1, which is the same IP that my FIOS router uses, so I go straight there instead of to the E4200.
Has anyone else been able to make this thing work with Mountain Lion and FIOS router?
View 7 Replies
View Related
Jul 8, 2011
How do I install a D-Link Wireless router, DIR 655 to the Verizon Fios internet. I have tried different ways but cant get it to work.
View 13 Replies
View Related
Feb 8, 2012
I bought the Linksys E1200 for it's wireless N and the guest account. set up my new Linksys E1200 router to use for wireless N access rather that my Verizon Fios provided Actiontec (model M4124-WR Rev.C) which is only wireless G, and so that I can use the guest account. I have an ethernet cable running from one of the 4 ethernet ports on the E1200 to one of the 4 LAN ports on the Actiontec. I have the wireless turned off on the Actiontec, and have the E1200 set as 192.168.1.200.My wireless N signal seems to be working fine from the E1200, and I was able to turn on the guest account on the E1200 and "connect" to it on my iPhone 4, but then when I open Safari I can not connect to the internet.
View 9 Replies
View Related
Jun 28, 2012
I have a Cisco 1751 that I wanted to use to create another network behind my Actiontec m1424wr Verizon router. My plan was to connect a linksys wrt54gs to the Cisco router for device connectivity. And I wanted everyone else in the house to still be able to use the Verizon router as expected. I know this is probably not the best way to create an internal network. But I am studying for the CCNA & CEH and just wanted to use the Outdated Cisco IOS on the 1751.
View 3 Replies
View Related
Jun 24, 2012
I have a new Linksys E2100 that was working well with an old Verizon modem. Then recently that modem gave up the ghost and I was issued another one (Westel Model 6100G). I have no problems with internet connectivity when connecting directly from my harddrive to the Verizon modem. I am also not having trouble connecting to the Linksys routher as I am able to see my wireless connection with no problem. However, when I try to set up the connnection with the E2100 in the loop (yes, it's connected correctly) I no longer have internet access.I tried de-installing and re-installing the Linksys software (thinking maybe there was some new configuration that would be auto-detected with a new set-up), but this didn't work. I suspect that if the problem is with my Linksys router and not with my Verizon modem that there might be something that could be done to reconfigure something manually but I do not know enough about connections and wireless systems to trust myself not to mess something up.
View 1 Replies
View Related
Nov 29, 2009
I'm trying to configure my Linksys WRT54G2 router as my primary router and have my Actiontec just used for the my FIOS TV (eg VOD, widgets, guide). I've googled many HOWTO's on how to do this but I just cant get it working. So setup up will look like this in th end:
(DHCP Server)
(Wireless) (Only TV)
Internet >> WRT54G2 >>> Actiontec >>> PC/Laptops
|
FIOS TV -------------
how to set this up? I understand that the STB devices configured on my Actiontec routers is actually my TV receiver and currently configured with the following IP addresses:
IP-STB1:Connection Type: Coax
192.168.1.100
IP-STB2:Connection Type: Coax
192.168.1.101
IP-STB3:Connection Type: Coax
192.168.1.103
I have COAX Ethernet setup so everything is going through ethernet per Verizon phone tech.
Actiontec Firmware Version: 4.0.16.1.56.0.10.11.6
WRT54G2 = DDWRT firmware
I've tried the following HOWTO's to no avail.[URL]
View 9 Replies
View Related
Jun 24, 2012
I have a new Linksys E2100 that was working well with an old Verizon modem. Then recently that modem gave up the ghost and I was issued another one (Westel Model 6100G). I have no problems with internet connectivity when connecting directly from my harddrive to the Verizon modem. I am also not having trouble connecting to the Linksys routher as I am able to see my wireless connection with no problem. However, when I try to set up the connnection with the E2100 in the loop (yes, it's connected correctly) I no longer have internet access.
I tried de-installing and re-installing the Linksys software (thinking maybe there was some new configuration that would be auto-detected with a new set-up), but this didn't work. I suspect that if the problem is with my Linksys router and not with my Verizon modem that there might be something that could be done to reconfigure something manually but I do not know enough about connections and wireless systems to trust myself not to mess something up.
At this point I'm assuming it's a Linksys issue since I know that my Verizon modem can connect me to the internet, so works properly. Is there some known incompatibility with this Linksys model and the Westell 6100G modem?
View 2 Replies
View Related
Sep 15, 2012
I need a router that can receive the signal from my Verizon 4G Jetpack so that I can send signal to items that require cat5 cable.Can the WES610N do that or is there one that can?
View 1 Replies
View Related
Feb 19, 2012
We got a 1921 router that works fine. We ordered Verizon Businss One Static IP ADSL. It came with a Westell Modem that we configured in bridge mode. When we do a test by assigning a static IP to our laptop then hook it up to the Westell it works fine. We can browse the web. Then when we assign a static IP to the Ethernet on our 1921 then connect it to the Westell it doesn't work. We can't ping out from the router to for example 4.2.2.2. From the router we can't even ping the default gateway (on Verizon's side).
View 2 Replies
View Related
Jan 11, 2011
I have Verizon FIOS. I am using their Actiontec router. I turned on WPA2. All is working well. I wanted to turn it off to diagnose a problem with one device. I can see no way to turn it off. To turn it on you click WPA2. you put in an 8 digit "password" etc and it works. There seems to be no way to turn it off. Am I overlooking something? I tried deleting the password. but it gives you an error and remindes you the password needs to be 8 characters.
View 3 Replies
View Related
Nov 6, 2011
Can I use my sprint with my Verizon plan ?
View 1 Replies
View Related
Sep 20, 2011
I have a router supplied by my ISP, Verizon[a g-router] using with 2 desktop and 2 laptop computers. All but 1 laptop are still running XP.So far I have not tried to print over the network. The printer is connected to the desktop that is also wired to the router.how to setup printing across this wireless network. Must I setup another internal home network in order to do wireless printing?
View 1 Replies
View Related