Cisco :: 2431 EEM Applet Event From SIP Syslog Message
Jul 27, 2011
I want to use an EEM applet on a Cisco IOS 2431 voice gateway running 15.1(2)T to take action upon expiration of a SIP registration (with its sip registrar). I thought that it might be possible to use existing error messages generated by the ios sip application to trigger an EEM applet.Is there a reference that lists all SYSLOG messages that SIP can generates, and their error levels? Can you show me how to turn on syslog messages, so that I can cause a SIP registration expiration on my GW and then see what SYSLOG messages are produced?
I think I understand how to write an applet and its event trigger from a SYSLOG message pattern, but I am having trouble seeing any SIP error messages at all, except if I turn on Debug, which usually produces way too many messages and may impact performance.
View 1 Replies
ADVERTISEMENT
Nov 12, 2011
I received a syslog message on my cisco 3845 router, what is that message mean. 11 13:36:06.265 UTC: ASSERTION FAILED: file "../les/if_ng_dslsar_tx.c", line 385
View 2 Replies
View Related
Sep 15, 2009
We have 2 Cat 6509 connected to 1 Gbps Ethernet WAN Link. On each 6509 we use 2 Gbps IPSec SPA Encryption cards for Encryption. The encrypted traffic goes to a GRE Tunnel. This morning I found some error messages in syslog.
%CONST_DIAG-SP-3-HM_TEST_FAIL: Module 1 TestIPSecEncrypDecrypPkt consecutive failure count:2
There were also several short tunnel downs/ups. I wonder if there is a bug in the new IOS image 12.2(33)SXI2a. We upgraded to this image last weekend.
View 2 Replies
View Related
Dec 19, 2011
I keep getting an error message, i've tried several things to resolve it but still no success.This is the exact error message:
regular translation creation failed for protocol 41 src Customer: dst outside:
View 4 Replies
View Related
Sep 16, 2012
It is a Customer requirement to send 802.11 client association/disassociation logs to the Syslog server in a Unified Wireless system. (AIR-CT5508 + LAP1142) [code] Unfortunately I didn't find such logs even in Msg Log with the severity level set to debugging.I was able to do client assoc/disassoc logging with SNMP trap + trap receiver software, BUT is there any way to do this with Syslog?
View 1 Replies
View Related
Aug 22, 2011
Now I'm trying to write software that get information from Syslog message, but I'm facing with the problem about getting statistic of client de-authenticated in a WLC (Software Version: 7.0.98.0), because I cannot find any log about this information on WLC except only this SNMP trap:
Tue Aug 23 09:52:28 2011Client Deauthenticated: MACAddress:00:xx:77:2c:06:db Base Radio MAC:00:xx:5d:0c:fc:30 Slot: 0 User Name: unknown Ip Address: 10.2xx.47.15 Reason:Unspecified ReasonCode: 1
So, is there any way that I can configure WLC to convert this SNMP trap to send to Syslog server as a normal Syslog message?
View 2 Replies
View Related
Mar 5, 2012
I'm fine tuning some of our ASA logging config, and am having an issue with one particular syslog ID.The message is: syslog 106100: default-level informational (enabled)and the log settings are:
Syslog logging: enabled
Facility: 20
Timestamp logging: enabled
Standby logging: disabled
Debug-trace logging: disabled
[code]....
This ACE log entry is generated by explicit deny any any statements at the end of all the ACLs, e.g.access-list inside_access_in extended deny ip any any log interval 600 Based on the config, I would expect to see this being logged to the syslog server, but not to the local buffer, but am still seeing them locally in the buffer:
Feb 22 2012 10:58:20: %ASA-4-106100: access-list inside_access_in denied udp INSIDE/HOSTABC(52629) -> OUTSIDE/HOSTXXX(162) hit-cnt 5 300-second interval [0x3baecf1e, 0x0]
It also still shows these as level "warning", %ASA-4-106100, instead of the default %ASA-6-106100 I've tried removing and re-applying the config at different levels but it still reports in the buffer log as level "warning", %ASA-4-106100 This also doesnt affect every 106100 log that is generated. Most messages are generated at the correct level 6 severity but some seem to randomly log at level 4. There doesn't seem to be any pattern to this. The same access-list line can produce severity level 4 and 6 106100 messages.
View 2 Replies
View Related
Feb 23, 2011
Receiving the following syslog message from a 4402 WLC:
%CAPWAP-3-AP_DB_ALLOC: capwap_ac_db.c:145
Unable to allot AP entry in database. We receive this message about once a minute on average. I can't find any documentation saying what it is. It looks like a database error, which makes think it might be a memory issue or an issue with having too many AP's on the WLC. However, that controller has less than 30 AP's on it.
View 3 Replies
View Related
Sep 21, 2012
logging buffered 4096 warnings The above causes router to log all the events with severity level 4 or below in buffer.What about logging console warnings command?will the above command cause router to send log messages with severity level 4( warnings severity level) to console only or will the router send all the log messages with severity level 4 or below to console ?
View 3 Replies
View Related
Oct 8, 2011
I recently upgraded a few 2960 switches to 15.0(1)SE, and while they are working fine, I did notice a strange syslog message upon boot-up that wasn't previously there. [code] I did some cursory searching via google but nothing useful presented itself.
View 7 Replies
View Related
Aug 6, 2012
I have a pair of 3750E-24PD-S stacked together, it seems after stacked together the stacked switch always flood the console screen with these messages which are not true: [code] Switch-2 is the stack member, Switch-1 is the stack master. The RPS fan failed refers to RPS2300 or the internal power supply of 3750E? Even when I turned on the RPS2300 the stacked switch still display the messages. Also I have two RPS2300 serving stack master and stack member respectively both RPS2300 were switched off why the messages only refer to Switch-2 and not Switch-1? [code]
View 1 Replies
View Related
Feb 22, 2013
I have cisco 5550 Firewall, one messages appear in syslog server from Firewall, (warning) i want to stop this message from appearing syslog traps.
View 2 Replies
View Related
Dec 10, 2012
I am at the rommon screen getting the > sign
Rommon 1>
When I am typing confreg 0x2142 I am just getting “rommon 2>” and if try again I will get “rommon 3 >”
No reset prompt , this never happened to me
View 1 Replies
View Related
Jul 7, 2012
Add the ability to send syslog events to multiple syslog servers in the SA500 Series routers. I know the functionality is currently in the RV220W because we utilized it. It would be great if you could configure the syslog servers by event type as well. For example, being able to send the kernel events to syslog server A, and all other events to syslog server B.
View 0 Replies
View Related
Jan 15, 2012
Recently i have upgraded the IOS of ASA5550 (in HA mode) to 8.4.2 from 8.0.5, after OS upgrade we found that the syslog from thses firewalls are not getting captured/transfered to centralised syslog server. The server is reachable from the firewalls.
View 3 Replies
View Related
Jul 12, 2012
Our ISP has set up a Cisco 2431-16fxs IAD (dual WAN) in one of our locations. It is used to connect the devices (PCs and SIP phones) on our LAN to internet (via 1st WAN port) and ISP's MPLS-based voip network (via 2nd WAN port).
We have 2 LAN subnets - the first subnet (PCs) requires internet access only, so it goes out via the 1st WAN port. The 2nd subnet (SIP phones) is connected the MPLS network (via 2nd WAN port).
We would like to have the SIP phones (that connects to MPLS-based network 192.168.1.x) to be able to access the internet. Is it possible to configure the IAD so that the phones are routed based on destination network; i.e. anything to 192.168.1.x via 2nd WAN port, anything else to the internet via the 1st WAN port?
View 1 Replies
View Related
Jul 12, 2011
It started out in CL, I cannot see the CAPTCHA applet, which is provided by Google. Fine. CL tells me to go to Google.com/recaptcha/demo and it says: "We're sorry...... but your computer or network may be sending automated queries. To protect our users, we can't process your request right now. See Google Help for more information" Ok, is google BLOCKING ME? I DID have some Trojan on my computer, but no more I removed it with MB.IT GETS WORSE.I CANNOT ACCESS GOOGLE HELP. ALL I SEE IS A WEIRD INCOMPLETE SCREEN, with some odd random characters.....
View 1 Replies
View Related
Jun 21, 2011
I am looking for a script or applet that will dis/enable an ethernet interface on Cat 6500 based on reachablity to an external destination. Reachability should be verified either directly by sending ICMP packets, or based on IPSLA status.
View 4 Replies
View Related
Aug 27, 2011
So ive been trying to enter a yahoo fantasy hockey mock draft and it wont seem to load. Ive tried both IE and Firefox, no luck..ive updated my adobe and jave..no luck i cant seem to get it to load..
View 2 Replies
View Related
Nov 18, 2008
I have a inspiron 1525 and 9 times out of 10 when I start up the computer I get the message "Dell wireless WLAN card wireless network tray applet has stopped working". When this happens I can still get on the internet. But I can't scroll the screen using the touchpad. Dell installed a new touchpad and that worked for about one day. I hooked up with them online twice and one tech updated the touchpad driver and another said it was my avast software that causes the problem, I say no way, because it worked for 6 months before this problem started.
View 4 Replies
View Related
Apr 4, 2011
I got problem with RVL200, it works good on my botch mac's witch OSX 10.5,10.6 and Firefox 3.6 but stops working after last java update. The machine switch 10.5 is working because I don't update Java but the other computer is up-to-date.
Problem is with launching the Java applet ,all the rest is working.- I'm log in to SSL VPN Tunnel- The new window is opening I accept applet to run .It try but nothing happens the window is blank with no connect / disconnect buttons.
All I have is Java error:Plug-In Java 1.6.0_24JRE version 1.6.0_24-b07-334-10M3326 Java HotSpot(TM) 64-Bit Server VMjava.lang.SecurityException: [code]....
View 1 Replies
View Related
Nov 8, 2011
The WCS haven't have new event since the count of event goes 40000.And, the wcs-3-0.log shows INFO[stspoll] Event Queue seems full.In the FAQ which says:#The WCS keeps the last 40,000 events in the system and clears them up after seven days. An event or alarm can have 1000 bytes on average.shouldn't it clears them up after seven days? how to clean events by manual?
View 0 Replies
View Related
Mar 9, 2013
why getting temperature event in 3560 switch, and we checked the Network room Temp it's normal around (22).
View 8 Replies
View Related
Dec 16, 2011
In 12.4(24)T4, I don't seem to have the SNMP detector in Advanced Security; however, it is present in Advanced IP Services.Is this a known pre-requisite? I can't seem to find any documentation or guidance from Feature Navigator that this should be the case.
Adv Sec (3845):
(config-applet)#event ?
application Application specific event
cli CLI event
config Configuration policy event
counter Counter event
[code]....
View 2 Replies
View Related
May 25, 2011
I have a server that is running on 2003 and we are having a few problems and in the event log I am getting id101 with the message whats virtual is not enable and i am not sure what this refers to or how to sort it out.
View 2 Replies
View Related
Dec 13, 2012
Is it possible to get the result in th event list in the form of graph, ie. like delay,throughput in the form of graph
View 3 Replies
View Related
Oct 24, 2011
Can LMS 4.0 display event directly on Topology Services when error occurs without accessing the other module by clicking right mouse on device? Anyway, I configured the logging command on all device but I cant see any syslogs on Event Monitor > Syslog. It dislays "No Syslogs are available" message.
View 1 Replies
View Related
Feb 26, 2012
how to take the event log of Cisco switch 3560, its argent.
View 1 Replies
View Related
Jun 6, 2011
The client is only interested to have one-WAN(MPLS) and One internet circuit with Dual ASA5510 primary/failover configuration. In the event primary firewall fails, there is no direct WAN/internet connection to failover firewall. I beleived that to mitigate the issue, I needed to add a layer 3 switch , and have each circuit (MPLS/Internet) or (modems/routers) connect to a L3 switch. L3 switch will do the vlan based routing based on the state of firewall. ? am i correct? The client want automatic failover to secondary firewall in the event the actual firewall failed without impacting the day to day business.
View 3 Replies
View Related
Apr 4, 2013
I'm trying to enforce a triggered EEM applet with an ACL rule. Is this even possible? I've been searching for weeks, but the closest thing I can find is using an SNMP evenst, which isn't what I'm looking for. I've looked at the list of event triggers (and I've used resource events before), but I can't find anything that works.
I'm specifically trying to switch packet capture on/off (with a script or EEM applet) on some 2900 series routers. I have 2960s and 2911s.
View 3 Replies
View Related
Sep 14, 2011
I've been getting warning messages from the event log of a 1300 series bridge, which is set as an Access Point in the network, states: 'Packet to client (mac address) reached max retries, removing the client'; I'm not sure why the client is removed. Does 'reached max retries' mean that the client has tried to many times to connect to the AP/Bridge?
View 1 Replies
View Related
Nov 30, 2011
Is the feature "event logging" that is present on ACS 4.2 with the option to "send all events to the windows event log" no longer supported in ACS 5.2?
View 1 Replies
View Related
May 8, 2012
Is it possible to automatically shutdown the OUTSIDE interface on a Cisco ASA 5520 in case of intrusion?.
In my opinion if there is an attempt of intrusion, just the device would stop it. If it cannot detect it, how can the device recognize the event and so shutdown the interface?. Am I correct?
View 1 Replies
View Related
