Just purchased a 3355 and installed, followed the set up no problems, added to WCS. Then WCS says no longer able to be reached.
Unable to ping, have to keep running the setup./opt/mse/setup/setup.sh seems, like the settings are not being kept.
Tried /opt/mse/setup/setup.log and sasys I have no permission, this is when logged in as root.
I want to reinstall the MSE image that was sent to me by Cisco TAC Team, however when I try to reinstall the MSE Application, however when I try to install it, the CD boots and show me the Red Hat enterprise image, then sends me black screen with the message "Kernel alive, Kernel direct mapping tables up to 480000000 @ 8000-1b000" and it stay there.
View 2 Replies View RelatedI have one user who doesn't receive a beep when he reaches an internal DN's voicemail. You will hear the attendant say that the person is not available and then the recorded name, but there's never a beep and consequently cannot leave a voicemail.
View 1 Replies View Relatedi am installing a CWLMS 4.0 and everything was good until i have reached the discovery for the devices, i am dealing with a bank setup and the branches is connected using layer 3 MPLS, branches are located behind the ISP router, so as a cdp neighbor i cant see anything but the ISP router at my Core.
so i cant see the branches routers as neighbors to my (seed Device) Core, and i have tried to use the ping sweep and i could not reach them also. and also to add them manually as we were doing before in the earlier versions of CWLMS, using the Devices and Credintials, this option is removed from the LMS 4.0 as i have red in a document.
1- snmp is configured on all devices.
2- access-list is configured on all devices.
3- i am able to reach the LAN Devices without any problems and the configuration is the same on all of the devices.
We want to deploy NAC for 500-600 users across WAN. We are planning for L3-OOB-Real Gateway central deployment Solution.We are having two NAC Server (3355) two NAC manger (3355) at HQ and 6 NAC Server(3315) at branch. We deployed NAC under VRF.How we can deploy NAC over WAN without NAC Server, need step by step configuration under VRF.
View 1 Replies View Relatedin windows 7 pro, While trying to join domain xxxx.local, error message appears. even ping xxxx.local is working...
View 4 Replies View RelatedI am setting up six ISE 3355 appliances 3 in one datacenter 3 in another. They have just installed a new server farm infrastructure using Nexus 5596 and Nexus 2248TP top of rack switches.I have been looking for documentation on how to do NIC teaming on the 3355 or some way to connect Gig0 to FEX101 and Gig1 to FEX102. Or do I just setup a port channel using LaCP between the two different FEX groups?
View 1 Replies View RelatedI have a cisco ISE 3355 and WLC 5508 and microsoft Active Directory 2008. I joind the ISE to the ADe successfully and I can see all groups on the AD, also I integrated the ISE with the WLC. my problem is when I created the Authentication policy on the ISE and joined to the AP by the PC nothing applied to the PC.
WLC version 7.4
ISE version 1.1.1.268
I have a ME-3400EG-12CS-M switch the ports 13 thru 16 have sfp's and are connection to other 3560 switches over fiber. The GIG 0/1 on the 3400 connects to the long haul sonet transport electrically. The IOS is Version 12.2(55)SE3. I can't ping or log into the 3400 unless I am at one of the 3560 switches hanging off of the NNI ports 13 thru 16. I think it is because the max number of NNI ports are 4 and I can't change the GIG 0/1 to a NNI port. Can I make config changes to the UNI port so that it will act like a NNI port with out upgrading the IOS to allow for more NNI ports?
View 1 Replies View RelatedI have to reset/recover admin-CLI password. I had posed the question in [URL]Now as per the CLI-admin password recovery procedure at [URL] I have inserted DVD in the hardware appliance, but I don't see any prompt with these options:
"Welcome to Cisco Identity Services Engine - ISE 3355
#
To boot from hard disk press <Enter>
#
Available boot options: "
I just see login prompt ( and of course, I cannot login because I don't know the password). I am using serial console connection to the appliance.
I have an MSE 3355 running 7.4.100.0, Cisco Prime Infrastructure 1.3.0.20 and 6 wism2 running 7.4.100.0. MSE was correctly added to Prime and assigned to maps and controllers. Context Aware Service is Enabled and Up and I have a permanent license installed with a limit of 3000 elements. The appliance is not able to perform client or rogue tracking. This is what I see under Services->Mobility Services Engines->Context Aware Service->General:
Version7.4.0.38 Operational StatusUpNumber of Tracked Wireless Clients0Number of Tracked Tags0Number of Tracked Rogue APs0Number of Tracked Rogue Clients0Number of Tracked Interferers0Number of Tracked Wired Clients0Total Elements Tracked0Tracked Elements (Wireless Clients, Rogue APs, Rogue Clients, Interferers and Wired Clients) Limit3000Tracked Tags Limit 3000
I am trying to setup QuickVPN on my RV180W and having no luck. My client log shows "Remote gateway wasn't reached" "Failed to connect". The client is Win7 64-bit. I have created the firewall rule for icmpv4 on my windows 7 client but still no luck. I checked with my ISP and they say all ports are open. I have created the VPN user.
View 6 Replies View RelatedI am working in an environment with 6 4402 all running 6.0.119.4 code and WCS 6.0.196.0. I keep getting an alert from WCS that the controllers cannot be reached "Controller '10.x.x.x' is unreachable. - Controller Name: 'Name'"
Now when I go to access the WLC through HTTPS I have no access at all but controller still responds to ICMP, HTTP, Telnet, SSH. I know I should have HTTP and Telnet disabled but since HTTPS keeps failing I would have no way to get into the controller. Is this a known issue in the 6.0.199.4 code? should I consider upgrading? The only fix I have found to work is to disable HTTPS reboot controller enable HTTPS and reboot again.
After I initial MSE with the wizard. MSE take so long to start the service (more than 1 hour) with "Starting MSE Platform, waiting to check the status"Then I decide to reboot the appliance, after that MSE shows the message "Traceback (most recent call last) File "/usr/sbin/yum-updatesd", line 40, in ?import gaminImportError: No module named gaming.
View 7 Replies View RelatedI have configured 3355 NAC appliances in HA pair everything is running fine.But not able to Login through GUI (Virtual IP) which is used during the configuration of HA pair.
View 1 Replies View RelatedWhat is the procedure for web admin password recovery for nac server applicance 3355?
View 14 Replies View RelatedWe have a 2960 switch (switch2), whose Management IP cannot be reached/Ping'd. Could not Ping . We have checked the following, but still no clue on the root cause. Haven't tried a reboot yet.
Topology.
All switches are cascaded through trunk and allows all v lan's.
L3switch1 <-> switch1 <-> switch2 <-> switch3 <-> L3switch2
Switch 2 has correct ARP entries for the other switches that we try to ping.Mac address table is fine.Switches other than Switch 2 has proper ARP and Mac entries.This Mgmt v lan is not pruned across any trunks. (we are able to ping switch3 crossing switch2 when tried from switch1)Switches are running PVST and convergence is fine.No access list to deny the traffic.Tried sut/no shut on the V lan interface.
But still switch 2 could not be reached.
I want to be able to send snmp traps to my NMS alerting our NOC to when we reach our configured max-associations on an ap. We currently use both 1130 AG and 1140-2N in autonomous mode, no controller. I have found a debug command "debug dot11 station connection failure" and the output of a test AP shows us the fact that the maximum number was reached. I need to find if it is possible to trap on such information.
View 1 Replies View RelatedI have two Aironet 1242AG access points. Currently, one of those access points is in use with an SSID of ABCWIFI.
I want to extend the wireless network to an area that can't be reached by copper or fiber. So, I've purchased another 1242AG. What I'm not sure of is how to configure it. Should I use it as a repeater or in a root-bridge/non-root bridge configuration?
What I'm most confused about is, what do I do with the second radio? Do I use the 5Ghz as the "backhaul" with a completely separate SSID and then broadcast the normal SSID over the 2.4Ghz? Or, do I even use the second radio at all? The key is that the same SSID is used in all locations because the devices in use need to move seemlessly between access points
We have several site-to-site IPSec VPN's setup.
All are running on ASA's 8.2(1).
All have a Security Association Lifetime (Time) of 8 hours.
All have a Security Association Lifetime (Traffic Volum) of 4608000 KiloBytes.
We have an issue when we do Oracle logshipping between the sites.
This triggers the Traffic Volume rekey as can be seen by this entry in the logs: -
%ASA-7-702307: IPSEC: An inbound L2L SA (SPI= 0x169FA1C1) between and (user= ) is rekeying due to data rollover.
However it does not appear as if the renegotiation is occurring properly. Within 10 to 15 minutes data stops being transmitted along the link, even though the IPSec tunnel still appears up in the ASDM GUI.
The 'fix' for this is that we are using is to login to the ASDM GUI and bounce the link by going to Monitoring => VPN => VPN Statistics => Sessions => IPSec Site-to-Site. Then select the appropriate VPN tunnel and click on 'Logout'. This forces a link renegotiation which works fine.
I have attached a logfile from the local ASA (there's nothing in the logfile of the remote ASA until we bounce the VPN tunnel).
Usually when i go to type ipconfig - under IPV4 - i get the internal IP address of my PC. which is usually 192.168.X.X But today, I get, what looks like an external IP, when i type "ipconfig". I get 89.X.X....
View 11 Replies View RelatedI have been using my wireless (linksys) for years now and just recently my wifi network no longer shows up on any of my devices (laptop, phone, etc). I am able to hard wire into the linksys and my laptop works but when I try to connect wirelessly, I can't even see the wireless network, I am only able to see my neighbors.
View 2 Replies View RelatedI an aware the SR520 is no longer made, But we use the VPN Remote aspect of it (For site to site UC540 installs), is there anything else that has the same VPN functionality, and what would i be looking for in regards to terms for the client to be on the router itself?
View 0 Replies View RelatedAfter upgrading to 7.2 on my 5508 WCS, the 1310 APs will no longer join. After a call to TAC they said the 1300 and 1400 APs are no longer supported on WCS. Is there any plan to add them back as supported in future releases?I was thinking I could downgrade my backup 5508 and change the APs to autonomous. Or is there some easier way to make them autonomous?
Also, as a low cost outdoor AP, I guess I am reduced to putting 1262s in a NEMA box with outdoor antennas. The 1552s are way too expensive for the quantity I need. Is there some other inexpensive outdoor AP that will replace 1300-1400 series?
I was using desktop computer and got infamous blue screen of death Rebooted and everything was fine except could no longer could see LAN connection or connect to internet The desktop computer also has a wireless card that allows me to connect to router wirelessly but only get "connect with limited access" I have a cable connection through a router and tried connection dsl directly to ethernet and bypassing router but no change Router works for other laptops to connect wirelessly I can see both network adapters in the device manager and both say devices are working properly Here are the results of ipconfig /all:
Microsoft Windows [Version 6.0.6002]
Copyright (c) 2006 Microsoft Corporation. All rights reserved.
C:UsersCooper>cd c:
c:>ipconfig /all
Windows IP Configuration[code]......
I work next to someone who has been complaining constantly about how his computer will give him some kind of "Access is Denied" error on one of his network drives almost every time he uses it. Other network drives on the same server work. Because it can be fixed by rebooting, the IT person has filed it as low priority / given up on fixing it but I would really like to shut him up but I can't find the answer in google. His computer is Windows 2000 SP4 and the server is Windows NT 4.0.
Edit: It happened again and I was able to get the actual error message. "H:DIST is not accessible The specified network name is no longer available"
My NetGear WG111v3 router no longer lights up, so I assume it's broken. Is there a way to hardwire it in through the ethernet in the NetGear modem? It tried already but when I click on the software it just beeps at me and won't open.
View 2 Replies View RelatedI just upgraded by Netgear router to the Netgear n600. I can no longer print to my Dell 926 All in One. I tried following the "Setting Up Your Printer" Instructions specifically steps 11 to 12 C but I receive an error message stating that the printer adapter was not able to join my network.
View 7 Replies View RelatedI performed a software reboot on the MSE3310. After the reboot the MSE was no longer visible on the network. I went and consoled into the device and it was operational. I ran the msed stop and msed start commands. I got this message when it tried to load eth0.Bringing up interface eth0: e1000 device eth0 does not seem to be present, delaying initialization.Earlier in the day I had updgraded the firmware from 6.0 to 7.0.230.0.
View 6 Replies View RelatedI have 2 RV042 routers. As of yesterday, for over 2 months, quick vpn has not been functioning. I had a 2008 server installed; the tech could not get the quickvpn clients to the server, so his solution to give clients access was to map the server to the internet. As you can imagine, it has been attacked consistently and we have since removed the server. Clients have not been able to use Linksys quickvpn client to connect. I have had 3 different network technicians, and have been charged way too much for nothing, and the best i got was it being restored to its broken state. We thought it was a flakey router, but both do the same thing.
View 7 Replies View Relatedi'm new with the asa's...i'm familiar with the FWSM's on 6500's and pix..I'm running Version 8.3(2) and i wanted to setup nat-control and use of identify nats for advertising inside subnets to my outside networks.
the old command was static(inside,outside) 10.x.x.x 10.x.x.x netmask 255.255.255.x i'm having a little difficulty decyphering the pdf about the static nat...the command itself is no longer used, nat-control is no longer used, but i'm not quite sure what the equivalent nat command is that equates to the old static inside,outside command.
We have a ASA 5520 which is configured to send log files to an ftp server. It has been doing that until recently I found out that it stopped sending the logs on August 11. I can't remember what I have changed in the ASA config to make the ftp stop. I changed the ftp config to another server but it won't upload any log file.
What can I do to make the ASA save the log buffer to the ftp server again?
I have recently bought a new computer and have been happily connected to my wireless network for three months. The other day the connection was lost and now I cannot connect to my wireless or parents wireless networks. I can connect via the ethernet only. I will attatch an ipconfig for you to have a look at when I am not connected can see my wireless network connections however when I tempt to connect it says windows cannot manage it. I am running windows 7 home premium 64 bit[CODE]
View 2 Replies View Related