In 802.1x I am having an issue where the computers un-authenticate if you remote desktop to them (they are signed in with the same domain account that is being used to remote connect with).
Any of ya'll out there that have done 802.1x run into this issue before?
I'm having trouble with my internet the past few days, I'm connected to the internet via wifi and after browsing some minutes it will tell me unable to connect (using firefox and other explorers). In order to continue browsing I must refresh the page several times and it will load without pictures.I'm using win7 home premium and it's the only computer that presents this issue. I've tried pluging the computer directly to the router, but it gives me the same results. Also, I've scanned the computer for malware with MCafee, but it shows nothing.
View 3 Replies View RelatedI will be moving away from my home computer but will still want access to it so I am trying to set up a VPN between it (home computer is windows 7) and my fedora 15 machine. They are currently on the same 192.168.1.0/24 network so I'm wondering if that may be the cause for my troubles.
Here's my setup:
Fedora 15 (192.168.1.3) is running the PPTP server with pptpd and gives 192.168.1.66 to any vpn client that connects to it./etc/pptpd.conf only has "localip 192.168.1.3" and "remoteip 192.168.1.66" options in it /etc/ppp/options.pptpd has "refuse-pap, refuse-chap, refuse-mschap, require-mschap-v2, require-mppe-128, proxyarp, lock, nobsdcomp, novj, novjccomp, nologfd, debug, dump" options Windows 7 (192.168.1.6, 192.168.1.66) is the client and I have it set to use connect to the public IP address of my router, PPTP, require encryption, only allow mschap-v2, don't use gateway in ipv4 properties.Both machines are connected to the same Belkin router (192.168.1.254) and I can ping locally to and from each computer no problem. The problem is my VPN connection is very inconsistent. I will open a ftp connection to 192.168.1.66 from 192.168.1.3, login, start uploading a file, get about 10MB uploaded, and then the VPN connection will die and the upload will fail. But, when I have "ping 192.168.1.66" running while uploading, the connection stays alive.
On wireless (lenovo tabletx61) I cannot connect through the intranet - no problem connecting through internet. When I manage to connect through intranet connection is dropped quite often.No problem connecting via Ethernet cables.
View 1 Replies View RelatedI have two WAP4410N wireless access points powered using Power-Over-Ethernet. Both are running the latest available firmware version (2.0.5.3)They are both connected to the same LAN and broadcasting the same SSID with a WPA2 password.
One is using channel 1, while the other is using channel 11.There is coverage overlap where the signal from both access points hover around -75db to -85db while standing in the same physical location.DHCP is disabled, and is being provided by another network device.
Every day or so, devices can connect and authenticate to the access points, but are not granted an IP address (and subsequently are unable access to the LAN or Internet). For devices that had already retrieved an IP address prior to the issue exhibiting itself, the devices simply stop communicating with LAN and Internet.
However, I can still access each access point's web admin interface from the LAN.
If I reboot both devices, the problem vanishes and devices are once again able to get an IP address and connect to the LAN and Internet.Are these symptoms of signal interference between the two WAPs or is this a completely different issue?
At first it seemed to happen everyday at the same time, but now seems completely random (happening twice a day somedays). At some part during the day while the user is busy with this system it drops the network connection. The ONLY way to get it back is by restarting via the reset button. Shutdown or even logoff just hangs. Nothing regarding that card will work or respond, you can not even disable and re-enable. I can however get the wireless to work without restarting. I've done everything I could possible think of including format and re-installing Windows. Something new I've noticed is that the user always has MS Access (in runtime mode) running while network goes down and then you can not end that process.
View 3 Replies View RelatedI have just upgraded from 20mb to 100mb internet with virgin media and ever since then when ever i try download any thing it start's downloading at a high speed then it slowly decreases until it dies out and stops like this
I tried a speed test to see what i was receiving it started at 100mb/s then it started to go down stopped for a sec then shot down to 10mb/s like this
When I am playing a game or watching a video on youtube or twitch it's fine streams with out needing to buffer only time i notice this is when i try to download some thing
windows update did its thing but as soon as it finished downloading and started installing my AVG anti-virus pop'd up requesting to move some files to "the vault", when that happened windows finished installing and asked my computer to restart, after it restarted i tried to go on AIM and Ventrilo (aka Vent), here's i knew something was wrong, I couldn't sign in to AIM all it said was "waiting for Network..." and Vent just simply said "unknown last ip address" I went to command prompt > ipconfig where it said connection-specific dns suffix it was blank, for ip address it still showed my ip same for subnet mask there was still some numbers but, for default gateway it was blank, thinking it must had something to do with the drivers window installed I did a system restore to two days ago, after it rebooted I thought I fixed it, I was able to sign on AIM as well as Vent even able to use google chrome and watch a friend stream on live on twitch tv, so calling it a night I shut down my PC and when to sleep, now to the title, woke up turned on PC got on AIM and Vent perfectly tried to play Maplestory (don't judge XD i grew up with that game) but it said I had to download the game, made sense to me I just got the game a last night but just did a system restore to 2 days before so I started downloading the game it would work for a few moments but then my internet would die and the same problem that I described would happen again, and the only way i could get my internet to work on my PC was to restart the computer?
I download drivers from Nvidia website it self so i did and it said my motherboard drivers were out of date, I downloaded the drivers and installed them, the Nvidia guid said it would uninstall the old drivers and restart the computer and install new drivers but, when the computer restarted it said something about there were other wizerd installings ? and press okay to minimize the prosses so I can close those, I tried but it did some kind of loop saying again that it would unistall and install after restarting and again like last time said there were other programs running, this time i clicked exit, I went back to Nvidia site to see if the drivers for the motherboard installed, the versions matched but the site did state "your drivers are up to date" like it normally would just asked if I wanted to down load the driver as if my motherboard was still out of date?
Tech Support Guy System Info Utility version 1.0.0.2
OS Version: Microsoft Windows XP Home Edition, Service Pack 3, 32 bit
Processor: AMD Athlon(tm) 64 X2 Dual Core Processor 5000+, x86 Family 15 Model 107 Stepping 2
Processor Count: 2
RAM: 2047 Mb
Graphics Card: NVIDIA GeForce 8800 GT, 512 Mb
Hard Drives: C: Total - 76308 MB, Free - 25295 MB;
Motherboard: ASUSTeK Computer INC., M3N78-VM
Antivirus: AVG Anti-Virus Free Edition 2011, Updated: Yes, On-Demand Scanner: Enabled
Bought a Vostro 220S about 2 months ago. After about three weeks, while I'm using it, the integrated NIC dies. All of a sudden I get the "Network Cable Disconnected" pop-up. No LEDs lit by the network jack. Contact Dell support who decides it's the motherboard.Three days later, the exact same failure. Contact support again. This time they want me to re-install Windows (yeah...right). I refused since the motherboard fixed it the first time. They finally agree to replace the motherboard again. Using the same router and cable that worked for years with my old computer. After the first failure, I switched ports on the router. While waiting for the motherboard replacements, I had installed an old PCI NIC I had laying around. Worked fine...still is. I'm not about to re-install Windows, which is what I know they'll want. I'll stick with the PCI card. Both of the people at Dell support as well as the tech they sent out told me they've not seen this before.
View 6 Replies View Relatedhow do i change the signal of my router, i belive this is the reason why my interent goes off when the house phone is used
View 2 Replies View RelatedWhen my Hp Desktop with Vista starts up,... the internet for everyone in the house goes out and the phones go out as well because our modem controls the internet and phone. The modem shows the DNS light blinking. When this Hp desktop is turned off I have internet and phone in the house. I just have no idea why the desktop turning on, causes the internet and phone to shut off...
View 2 Replies View RelatedI've got a Cisco DPC3825 modem that I also use as a wifi router. Conntected to it I have 4 eithernet cables:
1. From PC to Router
2. From another PC to router
3. From TV to router
4. From a Dlink Powerline Adapter to Router.It took me a while to figure this out but when I unplug all the eithernet cables and plug back in #1 and #2 (from above) the internet works. When I plug back in #3 and #4, the internet dies. Meaning, I am connected to the network but not the internet. I've reset the modem, changed SSID and restarted the PC many times but still can't figure out this issue.
I got an Apple TV a few weeks back and we've been using it a lot, especially to stream Netflix. However, another application that I got it for was for streaming iPhoto slideshows and iMovie stuff to the Apple TV with Airplay's screen sharing. This event scenario has played out several times..... Screen sharing is up and going and it'll be working great. All of a sudden the TV will go back to the main Apple TV menu on its own. Upon further review at this point, NONE of my WiFi (iPhone, iPad, etc.) devices will connect to the network and I have to power cycle the router. Router lights are on, but no one's home. At this point, it'll boot back up and then everything will be fine, at least for a while.Tonight, I was showing vacation pictures to some family and this same process happened twice. Since I can't seem to figure out how to stop playing a slideshow in iPhoto and then start it again in the middle, it's very annoying. Here are some relevant troubleshooting points to consider:
1. This network problem (or something similar to it) has happened in the past, but whatever it is, streaming a slideshow really seems to aggravate it. This seems to be the only scenario that I can do to actually INDUCE the issue. Periods of long uploads or downloads are fine. Streaming audio from one device and similar usage seems to be fine, but this scenario fails pretty much every time, and not necessarily right away.
2. After having this issue tonight multiple times, I stopped trying to stream an actual iPhoto slideshow and just went into the album and scrolled through the pics one by one. I did this for at least an hour with no issue. But with an actual slideshow, it failed twice in 30 minutes or less. And it's happened before tonight as well.
3. It doesn't appear to make a difference what application I'm streaming from on the Mac. Whether it's iPhoto, iMovie, or even Facetime.
-MacBook Pro Specs - OS X 10.8.2 - Late 2011 Model
-Apple TV - MD199LL/A, v5.0.2
-Router - Linksys/Cisci E1000 - Firmware v2.1.02
I've got a fair amount of devices in my home that use WiFi, but there was nothing irregular going on in the house to generate an excessive amount of internal network traffic or anything like that. My gut says the problem is with the router, but it's only a few months old, and I've updated the firmware to no avail.
Region : UnitedKingdom
Model : TL-WR1043ND
Hardware Version : v1
Firmware Version : TL-WR1043ND_V1_120405
ISP : BT Infinity (1)
I have a TL-WR1043ND v1 with the latest firmware installed TL-WR1043ND_V1_120405.I loose access to the router (can't see web page, can't config, can't restart).I have a Linux server on the Ethernet, and uplink through 200Mbps powerline adapter to the BT Infinity modem. A few other devices on the wireless.The router works well and I prefer it to the BT Home Hub 3 for fiber because it proved to be faster in many cases as tested.But after a few days the web interface becomes inaccessible. It's like the web server died or something. Browser says connection reset, if I try telnet to port 80 says connection refused.Actually I just did a full netcat scan (sudo netcat -z -v -192.168.1.1 1-65535) and all ports say connection refused.Ping works - I can ping it allright.DHCP server works too, just restarted a computer and got IP from the router.Port forwarding works as well and DynDNS seems to work as well as my ISP changes the IP periodically and I can always find the updated one.All works - exept I can't access the router in any way!If I restart (remove power and plug it back in), it boots and I can access the router again.So restarting won't work remotely, I actually have to go home to re-plug it!
I have wrt610n that i have wd 1 tb drive hooked to usb port and when i try to copy large folder/files to it, i get the dreaded- cancel, try again skip and it locks up solid. i have treied all settings in these and other forums. i have tried two different brand size hard drives, i have tried wireless and wired and nothing. is there a fix for this. i have latest firmware on everything, i have everything set tweaked best as they can and not one things makes a differance. all i get from linksys is try this try that. is there a way to copy large files to hd first via the pc then hook back to the router to see the files?
View 1 Replies View RelatedTo use Remote Desktop Connection, is it really this easy:Open up remote desktop connection on your Host PC --- type the IP of the computer you want to access, then click connect --- As long as "Allow Remote Desktop" is enabled on the PC you are trying to connect to, your attempt will be successful
View 1 Replies View RelatedIs to possible to connect to someone's computer via remote desktop connection w/o them finding out what my ip is?
View 4 Replies View Relatedi have to get a 2811 acting as a terminal server?
View 11 Replies View RelatedI created three different Remote VPN connections with three different networks . i can make them one but for some reasons i don't mix all.and iam using Cisco asa 5505 with Shrew Soft VPN software , so my problem is,- i connected Shrew soft remote vpn , if i try to connected another remote vpn connection this will not accept the second connection, any remote vpn connection software that accepts more than one connection
View 1 Replies View RelatedI have created a Remote VPN connection on a Cisco ASA 5505.When I'm connected remotely through the Cisco VPN Client my connection is very slow.I have a response time of 220ms when I ping my server. how to improve the speed of the VPN connection?
View 1 Replies View RelatedI opened a computer in other network via remote desktop(because I forwarded port in router)....and tried to access other computers in the network via remote desktop again from that computer but after I done, I don't know how to close the secondary remote desktop. There was one close button on the top, but if "close" it, whole rdp connection was closed. The secondary rdp connection is still open in the computer.
View 1 Replies View RelatedI am having trouble connecting to my home computer from my work computer via the Windows Remote Desktop Connection app.On my home computer (win 7 pro) I have:
1. Allowed incoming remote desktop connections
2. Verified that the firewall is open for RDC
3. Forwarded port 3389 on my router to my devices static IP
4.Verified that I am using the correct IP (Router has a dynamic IP but I called home and had my wife read the current IP # from whatismyip.com)
5. Setup an account on the home computer that is password protected
I am connecting from a win XP pro computer.I receive 0% packet loss with reasonable time delay when pinging my home IP from the work computer.I also asked a family member to try from a different location (using Vista Ultimate) with the same result Error is that connection is never established and I am never prompted to logon to the home computer.I can connect via RDC when on the home network.
i am trying to establish a VPN connection between two remote offices.In the home side I have Cisco 1811W and on the far side CiscoSRP541.
What is the best solution to build a site-to-site VPN between those two locations. I originally thought to configure a GRE tunnel on the routers, but faced some issues with that.
I have a problem connecting to VPS with Windows XP Remote Desktop Connection.The error I'm getting is:"Remote Desktop Disconnected - The remote connection has timed out. Please try connecting to the remote computer again."I am not behind any network, firewall, router...I tried to turn off firewall and antivirus programs to see if they are blocking it. It didn't work.I could find from Microsoft support site refer to the server side configuration. But I know problem isn't with server, because I am able to connect from another PC (notebook running windows 7 with wireless connection). It is working straightforward with default settings.Are there any settings that need to be changed in Windows XP for RDC to work?
View 1 Replies View RelatedI am running a virtual machine with 6 GB of ram with OS Windows 7 64 bit.I turned on remote desktop connection made sure firewall is off and even enabled ISS.But I cant connect to it from my main PC or any other PC.Is it because I have the same IP on the VM? Because I want to sell these VM's as dedicated servers but it wont work.
View 3 Replies View RelatedI cannot connect to the internet when I try it says "The remote device or resource wont accept the connection" It has been doing this for about 8 days... Sometimes It will connect the Internet explorer... But the past 2 days I CANNOT!
View 1 Replies View RelatedI want to setup Remote desktop connection between PC's running win 7 and win xp so that i can access win xp machine through win 7. Both are connected through LAN connection.
View 2 Replies View RelatedA user is trying to remote to her desktop with a small Dell Latitude netbook through remote desktop connection via a work VPN. Both her laptop and her desktop have working sound; however, when connected to her desktop through her laptop, no sound can be heard. It says there there are no audio devices detected. Obviously the drivers are installed on the desktop.
View 4 Replies View RelatedIs it possible to find out the IP address of a PC connecting via Remote Desktop Connection.Running XP Pro on a network,I have admin rights to the PC's, but no direct access to the servers.Event viewer shows some details, but no IP address.
View 3 Replies View RelatedI've been trying to set up a SSL VPN connection for remote conenctivitiy with AnyConnect Client. I've configured virtually everything necessary, I can connect to the VPN page, download the Client, establish connectivity, Get an internal-IP address. But I can't ping any internal (and of course external IP addresses)
View 12 Replies View RelatedWe have a WAP2000 that supports a few wireless users in a shop environment. Users authenticate using RADIUS. Users connect without issue and can browse the Internet.
The main local network uses a Cisco 800 router to connect to the Internet via DSL and there is an IPsec VPN tunnel to our main office.
When a user is connected to the network via a wired connection, all systems work as expected. If they are on wireless, they cannot connect to services at the main office. They must make a PPTP VPN connection for applications to function.
The WAP2000 has the latest firmware 2.0.4.0. It has a static IP on the local subnet.
I have setup a vpn connection at my remote offices with a 5505. At my main office I have a 5510.From my remote offices I can PING my Main office server. However when I go to set up a vpn connection through windows network and sharing center I can't seem to have the connection connect.....
View 15 Replies View RelatedI have a question on a VPN connection. I have a remote access VPN setup on an ASA 5505 to be able to remote into a location and check the HVAC program running on a PC. The remote connection connects fine, but when I use remote desktop to connect to the PC, it connects quick, but the screen redraw and reaction time is extremely slow. EG: I click on the program and it takes about 20 seconds to draw the screen, or I click on a menu bar and get the same times for reactions. Could this be a ISP Up/Download issue or is there something that I need to look at on the ASA to change?
If I connect to the remote and do a PING from my desktop to the remote Desktop, these are the results that I get:
Reply from 192.168.XX.XX: bytes=32 time=96ms TTL=128
Reply from 192.168.XX.XX: bytes=32 time=132ms TTL=128
Reply from 192.168.XX.XX: bytes=32 time=90ms TTL=128
[Code]......