Network Card Dies At Random
Aug 23, 2011
At first it seemed to happen everyday at the same time, but now seems completely random (happening twice a day somedays). At some part during the day while the user is busy with this system it drops the network connection. The ONLY way to get it back is by restarting via the reset button. Shutdown or even logoff just hangs. Nothing regarding that card will work or respond, you can not even disable and re-enable. I can however get the wireless to work without restarting. I've done everything I could possible think of including format and re-installing Windows. Something new I've noticed is that the user always has MS Access (in runtime mode) running while network goes down and then you can not end that process.
View 3 Replies
ADVERTISEMENT
Dec 29, 2012
Network running about 60 computers, most of which are running windows 7 professional. Some are on a domain, some are not.At (seemingly) random times, some computer on the network will lose the ability to browse websites (including the web interfaces of networked devices). I can't identify what circumstances cause this to occur. I only find out about it when someone calls me.From the affected computer:I can ping sites I can ping our Cyberoam UTM (which acts as our DNS, DHCP, and firewall)disabling/enabling connection doesn't fix the problem releasing/renewing ip doesn't fix the problem flushing dns doesnt fix the problem uninstalled antivirus on two test machines, problem still randomly manifests.replaced the Cyberoam with newer model users have claimed that if they wait a long period of time (40+ minutes) the problem sometimes resolves.rebooting the computer resolves the issue until it randomly occurs again changing the computer's mac address also resolves the issue until it randomly occurs again.
View 3 Replies
View Related
Apr 15, 2011
I've been having some issues with my network connectivity for a while now, and I haven't been able to figure out what the problem is. I run a wired connection to an Ethernet port in the wall of my university dorm. I have verified that it is not a global network issue or an ISP issue; this problem only happens on my PC.My network connection drops/disconnects randomly throughout the day. When I say disconnect/drop, I mean that all attempts to ping or access the internet fail. A few minutes pass before the Network and Sharing center task tray icon shows a warning sign saying that my computer could not connect to the internet.This is temporarily fixed by doing an ipconfig /release and ipconfig /renew, but I have to execute these two commands about 2-3 times a day on average.
There is no exact interval between the disconnects, nor does it happen when I am running particular programs. The disconnect happens regardless of what I am doing at the moment (gaming, browsing the internet, leaving the computer idle).A month back, I installed some Windows Updates and suddenly my internet connection was almost completely broken. I was experiencing the same issue, but much more frequently. My internet would die within 10 seconds of executing any download, but Windows wouldn't recognize that something was wrong. At first I thought the ZoneAlarm, Avast!, or the SafeConnect (as required by my university) services were causing trouble but uninstalling/disabling these services did not fix the problem.I also tried reverting to my default ethernet drivers, which did nothing. I uninstalled and reinstalled multiple versions of my drivers to no avail.However, the internet worked just fine in Safe Mode with Networking, so I cross-referenced the processes/services running in Safe Mode w/ Networking against my normal startup, guessing something else was at play.After some poking around, I discovered that disabling the Server and Browser services permanently fixed the issue of instant connection death. But the initial problem I described still remains;random, less frequent internet connection drops.
View 1 Replies
View Related
Sep 15, 2012
I have a mix of devices that all access the internet via a Deutches Telkom Speedport W 723v my windows devices, HTC phone and even the iPad 2 never have a problem, but my Macbook Pro (Unibody Late 2008 model) and my iMac (Probably 2007 / 2008) keep having a problem with the network dropping out. To fix it I have to switch off Airport and switch it back on again and it re-connects straight away.The Mac OSX software albeit now rather dated on both devices (The Macbook is 10.5.8) is kept up to date using Software Update.The problem amy also now be affecting my APPLE TV2 it never had a problem before but now I cannot connect to iTunes on my Macbook using Home Sharing it just does not want to connect!!!I did try before going into the Speedport and changing channels from AUTO to channel 1 but that did not resolve it. I am going to do it again and try a different channel but logging onto the Speedport is an absolute pain, I can only login using my Macbook Pro when it is booted into Windows XP and on Ethernet as we had all sorts of problems setting it up and could only do it using IE not SAFARI and now the Speedport login only recognises 1 x PC for logging in, if you try a different device it throws a wobbly and locks up!
View 7 Replies
View Related
Feb 7, 2013
I have been having intermittent wireless trouble. This includes Ping spiking, Wireless network drop-outs (The network stop appearing on available network list) and packet loss. This is all completely random (though very common) and is frustrating to say the least. As far as I know, the problem is not nearly as bad on other devices in the house , so I suspect that my network card has become shoddy. I have tried updating,removing,and re-installing network drivers to no avail. I have also used cmd and I have pinged 192.168.1.254, which shows random ping spikes, and some packet loss as well.
View 9 Replies
View Related
Jun 20, 2012
My router keeps crashing like it is restarting. it turns off then all the lights are beginning to turn un again after some time it repeats again and again....Last thing they did was turning down the internet speed for our Network. It worked in some time but then it begun crashing again...Then they said it was the cable in the road that could not take all the data stream... And something about and Bit error?I just dont belive the cable in the road thing because our neighbour are running 10 M/bits without a single error anytime... I am not an expert but i've found out that we are running a Sagembox or something like that. The hardware version (if that is important) is: 3DK04-02 Everybody in the house is running Win7 SP.1. If you need any more information then i will try to find them.
View 1 Replies
View Related
Jan 15, 2012
We are having an issue on our domain where both internet and network connection drops at random, this lasts from about 30 secs up to a minute.The Domain server is running Server 2003 and we have afew XP and a few windows 7 machines.All of this is behind a SonicWall TZ-200 firewall.[code]
View 2 Replies
View Related
Jul 16, 2012
I'm having trouble with my internet the past few days, I'm connected to the internet via wifi and after browsing some minutes it will tell me unable to connect (using firefox and other explorers). In order to continue browsing I must refresh the page several times and it will load without pictures.I'm using win7 home premium and it's the only computer that presents this issue. I've tried pluging the computer directly to the router, but it gives me the same results. Also, I've scanned the computer for malware with MCafee, but it shows nothing.
View 3 Replies
View Related
Mar 18, 2011
I am having an issue with 3 xp pc's in my network loosing connectivity to the file server. There are 4 network drives mapped to a win 2k3 server, when the user logs in everything is fine, after a while the network drives become unreachable and gives the following error - An error accrued while reconnecting (drive letter) to \servershare Microsoft windows network: The local device is already in use The connection has not been restarted” This happens from any user on only 3 boxes. The rest of the network is fine. These 3 are networked via a switch, I swapped that out for another hoping that might fix it, but nothing.
The other odd thing is the same time that the network drives error out it seems that DNS stops resolving anything outside my network. I can still ping the router and other pcs on the LAN but DNS fails to resolve any names for IE, and nothing outside the LAN can be pinged, no Google, no 8.8.8.8. How ever restarting fixes the issue for a short while. There have been no network changes and all systems are fully up to date as far as patches go. I was thinking it's got to be a ether a DNS issue (the file server is also the Active Directory Domain controller) or something in to do with the router/fire wall we use (it's a Cisco ASA 5005).
View 8 Replies
View Related
Sep 19, 2011
In 802.1x I am having an issue where the computers un-authenticate if you remote desktop to them (they are signed in with the same domain account that is being used to remote connect with).
Any of ya'll out there that have done 802.1x run into this issue before?
View 2 Replies
View Related
Jul 2, 2011
I will be moving away from my home computer but will still want access to it so I am trying to set up a VPN between it (home computer is windows 7) and my fedora 15 machine. They are currently on the same 192.168.1.0/24 network so I'm wondering if that may be the cause for my troubles.
Here's my setup:
Fedora 15 (192.168.1.3) is running the PPTP server with pptpd and gives 192.168.1.66 to any vpn client that connects to it./etc/pptpd.conf only has "localip 192.168.1.3" and "remoteip 192.168.1.66" options in it /etc/ppp/options.pptpd has "refuse-pap, refuse-chap, refuse-mschap, require-mschap-v2, require-mppe-128, proxyarp, lock, nobsdcomp, novj, novjccomp, nologfd, debug, dump" options Windows 7 (192.168.1.6, 192.168.1.66) is the client and I have it set to use connect to the public IP address of my router, PPTP, require encryption, only allow mschap-v2, don't use gateway in ipv4 properties.Both machines are connected to the same Belkin router (192.168.1.254) and I can ping locally to and from each computer no problem. The problem is my VPN connection is very inconsistent. I will open a ftp connection to 192.168.1.66 from 192.168.1.3, login, start uploading a file, get about 10MB uploaded, and then the VPN connection will die and the upload will fail. But, when I have "ping 192.168.1.66" running while uploading, the connection stays alive.
View 1 Replies
View Related
Apr 8, 2013
I have just upgraded from 20mb to 100mb internet with virgin media and ever since then when ever i try download any thing it start's downloading at a high speed then it slowly decreases until it dies out and stops like this
I tried a speed test to see what i was receiving it started at 100mb/s then it started to go down stopped for a sec then shot down to 10mb/s like this
When I am playing a game or watching a video on youtube or twitch it's fine streams with out needing to buffer only time i notice this is when i try to download some thing
View 3 Replies
View Related
Apr 30, 2012
windows update did its thing but as soon as it finished downloading and started installing my AVG anti-virus pop'd up requesting to move some files to "the vault", when that happened windows finished installing and asked my computer to restart, after it restarted i tried to go on AIM and Ventrilo (aka Vent), here's i knew something was wrong, I couldn't sign in to AIM all it said was "waiting for Network..." and Vent just simply said "unknown last ip address" I went to command prompt > ipconfig where it said connection-specific dns suffix it was blank, for ip address it still showed my ip same for subnet mask there was still some numbers but, for default gateway it was blank, thinking it must had something to do with the drivers window installed I did a system restore to two days ago, after it rebooted I thought I fixed it, I was able to sign on AIM as well as Vent even able to use google chrome and watch a friend stream on live on twitch tv, so calling it a night I shut down my PC and when to sleep, now to the title, woke up turned on PC got on AIM and Vent perfectly tried to play Maplestory (don't judge XD i grew up with that game) but it said I had to download the game, made sense to me I just got the game a last night but just did a system restore to 2 days before so I started downloading the game it would work for a few moments but then my internet would die and the same problem that I described would happen again, and the only way i could get my internet to work on my PC was to restart the computer?
I download drivers from Nvidia website it self so i did and it said my motherboard drivers were out of date, I downloaded the drivers and installed them, the Nvidia guid said it would uninstall the old drivers and restart the computer and install new drivers but, when the computer restarted it said something about there were other wizerd installings ? and press okay to minimize the prosses so I can close those, I tried but it did some kind of loop saying again that it would unistall and install after restarting and again like last time said there were other programs running, this time i clicked exit, I went back to Nvidia site to see if the drivers for the motherboard installed, the versions matched but the site did state "your drivers are up to date" like it normally would just asked if I wanted to down load the driver as if my motherboard was still out of date?
Tech Support Guy System Info Utility version 1.0.0.2
OS Version: Microsoft Windows XP Home Edition, Service Pack 3, 32 bit
Processor: AMD Athlon(tm) 64 X2 Dual Core Processor 5000+, x86 Family 15 Model 107 Stepping 2
Processor Count: 2
RAM: 2047 Mb
Graphics Card: NVIDIA GeForce 8800 GT, 512 Mb
Hard Drives: C: Total - 76308 MB, Free - 25295 MB;
Motherboard: ASUSTeK Computer INC., M3N78-VM
Antivirus: AVG Anti-Virus Free Edition 2011, Updated: Yes, On-Demand Scanner: Enabled
View 1 Replies
View Related
Apr 10, 2009
Bought a Vostro 220S about 2 months ago. After about three weeks, while I'm using it, the integrated NIC dies. All of a sudden I get the "Network Cable Disconnected" pop-up. No LEDs lit by the network jack. Contact Dell support who decides it's the motherboard.Three days later, the exact same failure. Contact support again. This time they want me to re-install Windows (yeah...right). I refused since the motherboard fixed it the first time. They finally agree to replace the motherboard again. Using the same router and cable that worked for years with my old computer. After the first failure, I switched ports on the router. While waiting for the motherboard replacements, I had installed an old PCI NIC I had laying around. Worked fine...still is. I'm not about to re-install Windows, which is what I know they'll want. I'll stick with the PCI card. Both of the people at Dell support as well as the tech they sent out told me they've not seen this before.
View 6 Replies
View Related
Nov 25, 2012
I keep getting random moderate Nat sometimes, other times its opened. I have made a static Ip and port forwarded 4 ports that xbox uses. 88 udp..3074 both...53 both...80 tcp... Now when i test my connection on the xbox dashboard a message will come up saying make sure my UpNp is enabled, which it is and it tells me to make sure port 3074 is enabled which it is. I have restarted both my modem and router multiple times to try and fix this.
I have a linksys cisco e4200 and I recently updated its firmware which i thought would possibly fix the problem.I have talked to linksys but no luck.I have talked to my internet Cox Communication but they tell me its the router and i believe it is because when i directly connect my xbox to the modem i never get the moderate Nat. I have also talked to Norton about my virus protection because I thought maybe it was blocking some ports, but they disabled it and I still get the message.
View 4 Replies
View Related
Apr 20, 2011
I noticed a TON of random devices showing up in my Network within Windows 7. When I say a ton, I mean 739! I am not computer illiterate, but definitely not a pro. My router is WEP password protected, so I'm not sure on earth is going on here. I thought maybe I had a torrent program open that could be affecting this somehow, but I don't..
View 6 Replies
View Related
Jul 31, 2012
I have this laptop with a built-in Intel Centrino Advanced-N + Wimax 6250 adapter to connect to WiMAX.Right now I have a WiMAX connection at home with a simple gateway. So what I want to do right now is trying to connect to this network using my built-in adapter.I'm facing right now is that the driver of the adapter only searchs for a certain provider from the US (Clear). I'd like to subscribe to their service but I live in Argentina so that's not a valid option. So my question is if you know of a custom driver or some other way to search for my local wimax network.
View 1 Replies
View Related
Feb 11, 2013
Wired PC randomly disconnects from network at random intervals each dayoday it has done so 3 times. The only way I have found to get it working again is to reset the router which can be inconvenient. When it disconnects all wireless devices continue to work and I have no issues like this with my wired consolesI switched to using a static IP address, since having an automatic one gave me the same results [i have since switched back to automatic]Be happy for any suggestions on how to sort this. I am using W7 OS and I'm using an Orange router. I don't know if its relevant, but when I go to reset my router I have noticed that the download light on my router is flashing like crazy when my PC has disconnected.
View 7 Replies
View Related
Nov 7, 2011
We have a bunch of computers(70 aprox) connected to a domain. Since couple weeks ago very strange issues started occuring, internet and network access(path to network share is lost) would come up at random times and on different machines and would last for about 10-20 seconds it would re-connect again.All the computers are using private addresses.Most machines are windows 7, some are xp.Using Windows server 2003 as dc.Since the occurance is so random it's very hard to pin point the cause.
View 1 Replies
View Related
Jul 21, 2011
I have SG200 50/50 Port Switch and the devices that connect into it are servers and workstations
Few days and until we experience network dropouts and when take a look at the switch log it gives me this?
2147483423 2011-Jul-22 16:34:53 Informational %LINK-I-Up: gi3, aggregated (1)
2147483424 2011-Jul-22 16:34:53 Warning %STP-W-PORTSTATUS: gi3: STP status Forwarding, aggregated (1)
2147483425 2011-Jul-22 16:34:50 Warning %LINK-W-Down: gi3, aggregated (1)
2147483426 2011-Jul-22 16:34:37 Informational %LINK-I-Up: gi3
2147483427 2011-Jul-22 16:34:37 Warning %STP-W-PORTSTATUS: gi3: STP status Forwarding
2147483428 2011-Jul-22 16:34:27 Warning %LINK-W-Down: gi3
Device connected to gi3 is a Web Server
This is also happening on more ports ie 20-printer, 13-Cisco Wireless Access Point, 24 File Server etc., which I don't know what is going on. With my research, it said something about spanning protocol. Is this possible to disabled?
The other cisco switch where desktop are also connected doesn't have this error.
My firmware is 1.1.0.73
Boot Version 1.0.0.1
View 2 Replies
View Related
Sep 26, 2012
I have two WAP4410N wireless access points powered using Power-Over-Ethernet. Both are running the latest available firmware version (2.0.5.3)They are both connected to the same LAN and broadcasting the same SSID with a WPA2 password.
One is using channel 1, while the other is using channel 11.There is coverage overlap where the signal from both access points hover around -75db to -85db while standing in the same physical location.DHCP is disabled, and is being provided by another network device.
Every day or so, devices can connect and authenticate to the access points, but are not granted an IP address (and subsequently are unable access to the LAN or Internet). For devices that had already retrieved an IP address prior to the issue exhibiting itself, the devices simply stop communicating with LAN and Internet.
However, I can still access each access point's web admin interface from the LAN.
If I reboot both devices, the problem vanishes and devices are once again able to get an IP address and connect to the LAN and Internet.Are these symptoms of signal interference between the two WAPs or is this a completely different issue?
View 1 Replies
View Related
Jul 1, 2011
I just built a new computer running Windows 7 with an Intel 82579V Gigabit on the motherboard. Since last night while playing an online game, I have occasionally noticed sudden network failures where I either time out of my game or severely lag for 10 seconds before the game catches up.
My other network hardware and setup remains unchanged during this build.I have never had issues with my internet connectivity from my ISP.
The problem is not consistent and I'm not sure how to repeat it. I was playing my online game for several hours and then suddenly started having problems every 5 minutes with disconnecting.I can watch the network utilization in the Windows Task manager drop suddenly and then spike back when I reconnect to the game. Similar visual seen on the Tomato software on my router.
So far I've grabbed the latest drivers for the network chip from my motherboard manufacturer's website and turned off Teredo. I also made sure no power saving features were enabled on the network chip in the device manager.
View 1 Replies
View Related
Apr 20, 2012
I think I am having problem with my network card I am running windows 7 with Dell wireless 1390 WLAN Mini-Card lots of times the signal is low and I get the error message no internet connectivity or some other error message that I am not being able to connect to the network provided by my wimax modem, Is there any program that I can download to test if there are any errors related to the network card or any way to fix this?
View 3 Replies
View Related
Jun 25, 2011
how do i change the signal of my router, i belive this is the reason why my interent goes off when the house phone is used
View 2 Replies
View Related
Feb 13, 2011
When my Hp Desktop with Vista starts up,... the internet for everyone in the house goes out and the phones go out as well because our modem controls the internet and phone. The modem shows the DNS light blinking. When this Hp desktop is turned off I have internet and phone in the house. I just have no idea why the desktop turning on, causes the internet and phone to shut off...
View 2 Replies
View Related
Apr 15, 2012
The problems looks like this: I'm able to browse the web without any problems until at random points of time - might be 2 hours after I turn on my PC or 5 or even half an hour the port 80 gets blocked - actually more like it hangs it self. As whatever I try to open i get "waiting for response" going and going. It's not even returning "page not found" error or anything. To top everything all other ports work fine - i can use https, ping run tracert - no problem there.
I've spend two days looking for some answer on the web but came up empty. I've scanned for malicious software with ad-awar and malwarebyte anit-malware - nothing came up. After restart of the pc everything comes back to normal but its frustrating needing to do that every now and then.
My home network looks like this: I have some broadband modem that is connected to local wifi TP-LINK router (Model No. TL-WR340G/TL-WR340GD). There are four devices using this connection - two pc's (laptops), android phone and android tablet.
View 1 Replies
View Related
Oct 25, 2012
I've got a Cisco DPC3825 modem that I also use as a wifi router. Conntected to it I have 4 eithernet cables:
1. From PC to Router
2. From another PC to router
3. From TV to router
4. From a Dlink Powerline Adapter to Router.It took me a while to figure this out but when I unplug all the eithernet cables and plug back in #1 and #2 (from above) the internet works. When I plug back in #3 and #4, the internet dies. Meaning, I am connected to the network but not the internet. I've reset the modem, changed SSID and restarted the PC many times but still can't figure out this issue.
View 5 Replies
View Related
Dec 5, 2012
I got an Apple TV a few weeks back and we've been using it a lot, especially to stream Netflix. However, another application that I got it for was for streaming iPhoto slideshows and iMovie stuff to the Apple TV with Airplay's screen sharing. This event scenario has played out several times..... Screen sharing is up and going and it'll be working great. All of a sudden the TV will go back to the main Apple TV menu on its own. Upon further review at this point, NONE of my WiFi (iPhone, iPad, etc.) devices will connect to the network and I have to power cycle the router. Router lights are on, but no one's home. At this point, it'll boot back up and then everything will be fine, at least for a while.Tonight, I was showing vacation pictures to some family and this same process happened twice. Since I can't seem to figure out how to stop playing a slideshow in iPhoto and then start it again in the middle, it's very annoying. Here are some relevant troubleshooting points to consider:
1. This network problem (or something similar to it) has happened in the past, but whatever it is, streaming a slideshow really seems to aggravate it. This seems to be the only scenario that I can do to actually INDUCE the issue. Periods of long uploads or downloads are fine. Streaming audio from one device and similar usage seems to be fine, but this scenario fails pretty much every time, and not necessarily right away.
2. After having this issue tonight multiple times, I stopped trying to stream an actual iPhoto slideshow and just went into the album and scrolled through the pics one by one. I did this for at least an hour with no issue. But with an actual slideshow, it failed twice in 30 minutes or less. And it's happened before tonight as well.
3. It doesn't appear to make a difference what application I'm streaming from on the Mac. Whether it's iPhoto, iMovie, or even Facetime.
-MacBook Pro Specs - OS X 10.8.2 - Late 2011 Model
-Apple TV - MD199LL/A, v5.0.2
-Router - Linksys/Cisci E1000 - Firmware v2.1.02
I've got a fair amount of devices in my home that use WiFi, but there was nothing irregular going on in the house to generate an excessive amount of internal network traffic or anything like that. My gut says the problem is with the router, but it's only a few months old, and I've updated the firmware to no avail.
View 9 Replies
View Related
Nov 12, 2012
Region : UnitedKingdom
Model : TL-WR1043ND
Hardware Version : v1
Firmware Version : TL-WR1043ND_V1_120405
ISP : BT Infinity (1)
I have a TL-WR1043ND v1 with the latest firmware installed TL-WR1043ND_V1_120405.I loose access to the router (can't see web page, can't config, can't restart).I have a Linux server on the Ethernet, and uplink through 200Mbps powerline adapter to the BT Infinity modem. A few other devices on the wireless.The router works well and I prefer it to the BT Home Hub 3 for fiber because it proved to be faster in many cases as tested.But after a few days the web interface becomes inaccessible. It's like the web server died or something. Browser says connection reset, if I try telnet to port 80 says connection refused.Actually I just did a full netcat scan (sudo netcat -z -v -192.168.1.1 1-65535) and all ports say connection refused.Ping works - I can ping it allright.DHCP server works too, just restarted a computer and got IP from the router.Port forwarding works as well and DynDNS seems to work as well as my ISP changes the IP periodically and I can always find the updated one.All works - exept I can't access the router in any way!If I restart (remove power and plug it back in), it boots and I can access the router again.So restarting won't work remotely, I actually have to go home to re-plug it!
View 14 Replies
View Related
May 17, 2012
I have a Lenovo T420 with a Intel Centrino Advanced-N 6205 wireless network card that causes me some headache. It randomly gets disconnected from my router (Zyxel P-2601HN-F1) and home network, works fine though if i using cable. Right after it gets disconnected it reconnects and works fine until it gets disconnected again. I have an HP laptop connected at the same time and no problems there.It works fine in the network in our office (work laptop). I tried our IT dept but they were clueless and told me I had to figure it out by myself, as it works in the office..
View 3 Replies
View Related
Jan 23, 2012
I have wrt610n that i have wd 1 tb drive hooked to usb port and when i try to copy large folder/files to it, i get the dreaded- cancel, try again skip and it locks up solid. i have treied all settings in these and other forums. i have tried two different brand size hard drives, i have tried wireless and wired and nothing. is there a fix for this. i have latest firmware on everything, i have everything set tweaked best as they can and not one things makes a differance. all i get from linksys is try this try that. is there a way to copy large files to hd first via the pc then hook back to the router to see the files?
View 1 Replies
View Related
Aug 21, 2012
This past weekend I went out of town and took my Windows 7 laptop with me -- since I returned home, it has been unable to connect to my wireless network. Other devices in my home connect to the network just fine, and the problem laptop has always been fine until now. My network card is an Atheros AR9285, and I'm attempting to connect to a Medialink router with WPA password protection and AES encryption.My wireless network icon in the task bar has a yellow sign with an exclamation point in it. It says "No Internet access."
View 1 Replies
View Related
Jan 30, 2013
In the bottom floor there are three computers, an iMac computer that receives an average wireless Internet signal, desktop computer and a laptop.I want to take care of the desktop computer and buy a network card, the next card:TP-Link TL-WN951NNow it has three antennas, each of its reception range is 2 dbiI should buy three of the 10 dbi antennas and connect them to the network card?It will give a good solution strong wireless signal and good speed?
View 4 Replies
View Related
