Cisco :: ASA 5505 SSL VPN Log Failed
Aug 31, 2012[code]....
Red error what is the reason? Only appears in the window 2003 server.
ADVERTISEMENT
Cisco :: 5505 VPN Failed Anti-reply Checking
Apr 4, 2013I have many VPN sites using ASA5505 with broadband connection and terminating on a single ASA5550.I have a problem with one site. they are having poor performance. One of the issues I can see is an error on the remote ASA 5505.ive tried the reccomended fix using this command: crypto ipsec security-association replay window-size 1024.
View 1 Replies View RelatedCisco VPN :: 5505 - Routing Failed To Locate Next Hop For TCP From Internet
Jul 2, 2012We need to connect from an external computer connected by cisco-vpn-client to one internal server that is behind an ASA 5505 config with Easy VPN. The VPN connection with the client to our 5520 firewall is fine, but when I try to connect to the server on the LAN, FW log says:
Routing failed to locate next hop for TCP from Internet:172.17.1.215/1108 to Lan_Interna:172.33.0.50/3389
Attached image.
Cisco Security :: ASA 5505 Failed To Unzip AnyConnect Package
Nov 28, 2011There is ASA 5505:
- 8.4(2) IOS
- FLASH: 128 Mb
- DRAM: 256 Mb
Requirements for 8.4(2) are acomplished: For the ASA 5505, only the Unlimited Hosts license and the Security Plus license with failover enabled require 512 MB; other licenses can use 256 MB.Are installed latest AnyConnect packeges for linux, some smatphones (each 4-5 MB). But for Windoes it's 21 MB and we got error "Failed to unzip the Anyconenct Package". In prior IOS version there was command cache-fs limit, by default it was 20 Mb. As i understand ASA now dinamically determines amount of cache memory and it's not enough. Because of the increased size of the AnyConnect package from 4MB in AnyConnect 2.5 to 21 MB in AnyConnect 3.0, you may need to upgrade the ASA flash and memory card first.If your ASA has only the default internal flash memory size or the default DRAM size (for cache memory) you could have problems storing and loading multiple AnyConnect client packages on the ASA. Even if you have enough space on the flash to hold the package files, the ASA could run out of cache memory when it unzips and loads the client images.So there is a question, after DRAM upgrade to 512 MB will be there enough cache memory for Anyconnect packeges with total size 35-40 Mb?
Cisco VPN :: ASA 5505 / Regular Translation Creation Failed For Icmp
Mar 15, 2011I have site-to-site VPN and IPsec VPN installed on ASA 5505. VPNs work OK except few stranges:I can't ping 192.168.17.104 from remote ip 192.168.17.138 - 305006 192.168.17.138 regular translation creation failed for icmp src OLD-Private:192.168.17.104 dst OLD-Private:192.168.17.138 (type 0, code 0) in the same time I able to ping 192.168.17.104 from my network 192.168.10.0 and can ping from ASA No firewall at 192.168.17.104?How to fix it?
There is my config:
ASA Version 8.2(2)
!hostname ASA5505domain-name domainenable password password encryptedpasswd password encryptednames!interface Vlan1 description INTERNET mac-address 0000.0000.0001 nameif WAN security-level 0 ip address a.a.a.a 255.255.255.248 standby a1.a1.a1.a1 ospf cost 10!interface Vlan2 description OLD-PRIVATE mac-address 0000.0000.0102 nameif OLD-Private security-level 100 ip address 192.168.17.2 255.255.255.0 standby 192.168.17.3 ospf cost 10!interface Vlan6 description MANAGEMENT mac-address 0000.0000.0106 nameif Management security-level 100 ip address 192.168.1.2 255.255.255.0 standby 192.168.1.3 ospf cost 10!interface Vlan100 description LAN Failover Interface!interface Ethernet0/0!interface Ethernet0/1 shutdown!interface Ethernet0/2 shutdown!interface Ethernet0/3 shutdown!interface Ethernet0/4 shutdown!interface
[code]....
Cisco Firewall :: ASA 5505 / Failed To Locate Egress Interface For TCP From DMZ
Apr 9, 2013I have ASA 5505, in routed mode, basic license.I run a web server in DMZ. I can reach Internet from DMZ. Also, the trafic from outside can reach the web server. However, if the web site is requested from within the DMZ, the request will fail, and the firewall log contains the following message:
Failed to locate egress interface for TCP from DMZ50: 30.30.30.10/49213 to 170.70.30.114/80
I don't have DNS, so the request must go to Internet, even the web site is hosted on the server in DMZ.
Here is sample of my config file:
interface Vlan1
nameif inside
security-level 100
ip address 162.160.1.3 255.255.255.0
!
interface Vlan2
[code]....
What can be the reason for requests, originated in DMZ, to fail, and how could it be fixed?
Cisco VPN :: ASA 5505 Error Copying X To Temporary RamFS File Failed
Nov 16, 2012[OK] webvpn
webvpn
[ERROR] anyconnect image disk0:/anyconnect-win-3.0.08057-k9.pkg 2
copying 'disk0:/anyconnect-win-3.0.08057-k9.pkg' to a temporary ramfs file failed
Trying to add the windows anyconnect to the list of usable software for clients and that error happened. What is going wrong? I assume I dont have enough RAM...
Cisco Firewall :: ASA 5505 - Regular Translation Creation Failed For Protocol 47 SRC
Oct 10, 2011We have a PIX with 3 interfaces. Inside, Outside,DMZ.
On my DMZ we have some clients that come in and remotely connect back to there office via MSPPTP. I setup the ASA with this to get rid of the error message: regular translation creation failed for protocol 47 src
policy-map global-policy
inspection_default
inspect pptp
Now when the dmz client tries to connect back to there PPTP server I get the following error.
172.31.10.204 0 24.172.85.162 37624 Teardown dynamic GRE translation from dmz:172.31.10.204/0 to outside:24.172.85.162/37624 duration 0:01:30
172.31.10.204 1069 173.188.74.155 1723 Deny TCP (no connection) from 172.31.10.204/1069 to 173.188.74.155/1723 flags PSH ACK on interface dmz
172.31.10.204 173.188.74.155 63767 Teardown GRE connection 8393958 from dmz:172.31.10.204 to outside:173.188.74.155/63767 duration 0:01:08 bytes [ code]...
Cisco Switching/Routing :: 3845 - License Installation Failed With Error / XML Parsing Failed
Jan 19, 2012I am having Cisco 3845 series router with c3900-universalk9-mz.SPA.151-4.M2.bin IOS . I want to install new Licence on it for DATA. When i am trying to install licence on it i am facing the error "% Error: License installation failed with error: XML parsing failed".
View 4 Replies View RelatedCisco :: UTMajoracquisition Failed To Run In LMS 4.0.1
Apr 11, 2012UTMajoracquisition failed to run in LMS 4.0.1..
Troubleshooting done
1) Started the UTMajorAcuisition process manually using pdexec: It again fails to run
2) Renamed to ut.properties.orig to ut.properties and tried to restart the process .. IT again fails to run.
Cisco WAN :: 887 / PPP - LCP Failed To Negotiate
Mar 16, 2013I have a cisco 887 router and I have tested on two different DSL line. The first line it worked fine with while the other noe is not. both line on same exchange and establishing the ppp session with same BRAS. The debug seems that there Establishing phase failed, but my question here is how our BRAS will faied the establishing from on line while from other landline is working fine.
=============================================================
CISCO ROUTER Configuration
=======================
interface ATM0/1/0no ip addressno ip mroute-cacheno atm ilmi-keepalivedsl operating-mode autopvc 8/35encapsulation aal5mux ppp dialerdialer pool-member !interface Dialer1ip address negotiatedip nat outsideip virtual-reassemblyencapsulation pppdialer pool 1ppp chap hostname companyxppp chap password abcda123ppp pap sent-username companyx password abcda123
===========================================
when I did ppp negotiation debug the below messages i got:
============================================
Mar 16 13:19:18.103: Vi2 PPP: Phase is DOWN
Mar 16 13:19:19.103: PPP: Alloc Context [85DEC77C]
Mar 16 13:19:19.103: ppp28 PPP: Phase is ESTABLISHING
Mar 16 13:19:19.103: Vi2 PPP: Using dialer call direction
Mar 16 13:19:19.103: Vi2 PPP: Treating connection as a callout
Mar 16 13:19:19.103: Vi2 PPP: Session handle[700001C] Session id[28]
[code]....
Cisco :: LMS 4.2.1 Inventory Failed
Aug 6, 2012I can't inventory a 4507R + E / SUP7E Version 15.1.1 SG with the last version of LMS 4.2.1. Next, the extract of IC_Server.log.
[code]....
Cisco :: LMS 3.2 ANIServer Failed To Run
Sep 25, 2011I have installed Ciscoworks LMS 3.2 0n windows server 2003 enterprise edition. I have issue with Campus Manager while accessing any thing in Campus Manager it is giving following error.
"Error in loading properties from the server" "Can not contact to ANI server" Status of ANIServer process is Failed to run
I tried to reinitialize Campus Manager Database still it is showing same issue.
Installed Campus manager version 5.2.1 check attached file for ANI log
Cisco :: LMS 3.2 ANIServer Process Failed To Run
Sep 18, 2011I have issue with the ANI Server process, which fails to start. The LMS version is 3.2. It's recently installed, with just one device added to the database so far. I've read some similar cases in the forum, but I'm starting a new thread since it could be a different issue which causes the problem.Please, find attached ani.log, ANIServer.log, the output of the pdshow command and ANIServer.properties files. I doubt that the last one might be corrupted for some reason.
View 4 Replies View RelatedCisco VPN :: VPN Version 5.0.07 Failed Connection
Aug 29, 2011For quite some time now, we have been experiencing an issue with the Cisco VPN client that will make the client completely unusable. I have noticed that when a specific feature of Symantec Endpoint Protection is enabled, it will (about 25% of the time) cause the following errors to appear when attempting to connect anywhere with the Cisco VPN client. Once this error happens once, the VPN client then becomes useless.
Error #1
Reason 414: Failed to establish a TCP connection
Error #2
Reason 440: Driver Failure
Error #3
Reason 442: Failed to enable virtual adapter
It seems that fixing one error will cause the other error to come up.I have tried reinstalling the client with the same version and older versions and the issue still comes up. All users in the company are using Windows 7 64-bit with SP1 installed.The oddest thing about this is that all employees in the company have the same antivirus with the same features enabled, however, it only happens to a small percentage of employees.
Cisco :: WCS 7.0.220.0 Backup Restore Failed
Aug 21, 2012I am facing a failed issue when restoring the WCS Database. Below is the error i get, does any one out there facing it before?
#######################################
[root@egwgwcs WCS7.0.220.0]# ./Restore
Please enter the full path of the backup file name: /opt/WCS7.0.220.0/Backup_File/WCS_Aug2012.nmsbackup
Untaring the backup file...
Failed to untar backup file. Exception: invalid stored block lengths
Restore database failed.
#######################################
Cisco :: LMS 4.0 Inventory Collection Is Failed
Oct 17, 2011I have Cisco Works LMS 4.0 on Win 2K8 64 bits on VMware EXs. I am facing issue with reference to Inventory Collection, my 10% devices (including Routers & Switches) Inventory collection is failed and give me error (Device sensed, but collection failed). I increase the SNMP timeout 10 sec, 30 sec, 60 sec and even 100 sec the result be the same.
View 1 Replies View RelatedCisco :: Data Collection And UT Failed On LMS 4.0.1
Aug 17, 2011I have a problem with the User Tracking and Data Collection on LMS 4.0.1 . I think It crashes every time or freezes. I Have this error if I lunch UT Acquisition :
Failed to start acquisition: Construction of XML data required for UT IS in progress. Please try After Some Time.When scheduling a CM data collection, I have this error: Data collection IS Already in progress.
I detected an error in ani.log line 12266: Exception in thread "Discovery" java.lang.AbstractMethodError: com. cisco. nm. ani. server. topo. Port Channel.portIfIndex ()
I successfully changed the name of the CiscoWorks server last week with the tool hostnamechange.pl.
Perhaps there was an impact on data collection ?
Cisco :: Getting Authentication Failed AP1131
Aug 31, 2011I got a report from a branch office which is getting trouble to authenticate users to the WLAN this is a stand alone AP which has a configuration script that we use for all our branch offices but in this case is not working. It seems to be an issue with RADIUS but if it was the case the whole company would be experiencing problems since it is a central RADIUS server.
Here is a log from the AP By the way I modified the radius server timeout to 90 sec
APIMMEXP01#
Sep 1 17:01:47.240: %DOT11-7-AUTH_FAILED: Station 0021.5c7f.1739 Authentication
failed
Sep 1 17:01:53.503: %DOT11-7-AUTH_FAILED: Station 0026.c64b.c3d6 Authentication
failed
Sep 1 17:01:58.739: %DOT11-7-AUTH_FAILED: Station 001e.65cf.9ca8 Authentication
failed
[code]....
Cisco :: LMS 4.0.1 - Inventory Collection Failed?
Oct 5, 2011LMS 4.0.1 installed on Windows Server 2008 R2 Standard with SP1. Created Inventory collection job, but couple of hours later, it is failed with all devices Not Attempted. Increased SNMP timeout on 10 sec, started again for only 1 device - collection failed again. I am attaching pdshow and ICServer file.
View 6 Replies View RelatedCisco :: Failed POST For AP1252AG-A-K9
May 8, 2013We have a AP1252AG-A-K9. Everytime we load it up this is what we get (see below). I tried resetting the system ("mode" way) and it did not fix the issue. I tried to reinstall the IOS and it fixes everything up and the AP will work as normal but everytime I reset the modem I will get an error message below. [code]
View 5 Replies View RelatedMy DNS Lookup Failed
Mar 11, 2013I been having trouble with my pc ... it looks like it wants to load the page and takes forever and then it says DNS lookup failed ... sometimes it loads but I have to keep trying until it does load.. It's a Windows XP
View 9 Replies View RelatedCisco :: LMS 4.0.1 Failed To Collect Inventory From Cat4506-E
Nov 11, 2011There are 3 newly installed Cat4506-E.SSH and SNMPv3 access are verificated. Devices are managable in every way only the inventory is missing.If I try to collect manually then they fail but I can't figure it out why.
View 2 Replies View RelatedCisco :: Import Certificate Failed For 7925
Jul 24, 2011I'm currently in the process of the setting up a new wireless network and I want to test out our 7925 phones on it. When I try uploading the certificate to the phone it fails and I find the following error in the trace logs
[code]...
I created this certificate using using Windows Server 2003 and it is 2048 bits. This certificate works fine with my laptop but I'm unable to upload it to the phone. The app load currently on the phone is CP7925-MFG-D.8.LOADS. Are there any specific guidelines out there when creating a certificate for a Cisco 7925 phone?
Cisco Application :: Nexus1000V-VSM-PDC / N1k Installation Failed
Apr 18, 2013i try to install n1k VSM on Cisco UCS server(4Gb memory free).Due installation i got messgae-An error was received from the ESX host while powering on VM Nexus1000V-VSM-PDC.Failed to power on VM.Could not power on VM : Admission check failed for memory resource See the VMware ESX Resource Management Guide for information on resource management settings.
Group vm.1014695: Invalid memory allocation parameters for VM vmm0:Nexus1000V-VSM-PDC. (min: 524288, max: -1, minLimit: -1, shares: -3, units: pages)
Group vm.1014695: Cannot admit VM: Memory admission check failed. Requested reservation: 534234 pages
Cisco VPN :: ASA 5520 / AnyConnect Failed To Get Configuration
Oct 16, 2012My client is upgrading from anyconnect 2.5.2014 to 3.1.00495. The ASA is running ASA 5520 version 8.2(5)33 and is in an active/standby failover pair.when trying to push out the new 3.1 from the pair to windows 7 and XP machines, he gets the error "Failed to get configuration from secure gateway. Contact your system administrator". When he tries to push 2.5.2014 and 2.5.6005 out from the pair this works fine.When pushing the 3.1 out from a stand-alone test ASA 5520 it works fine.
View 2 Replies View RelatedCisco AAA/Identity/Nac :: ACS 5.3 - Application Failed To Start
Apr 28, 2012Although, ACS states its installed, after going through the startup. However when I do show application nothing comes up. When I do a application start acs, %Application failed to start.
View 7 Replies View RelatedCisco WAN :: 3845 Fan Failed - Error Reported
Feb 27, 2012 In my head office we have Cisco 3845 router.in the router we put the show log command the below error is came..
What is the error??why the error came??
25024684: Feb 29 10:33:13.759 India: %FAN-3-FAN_FAILED: Fan 1 had a rotation error reported.
25024685: Feb 29 10:33:33.759 India: %FAN-3-FAN_FAILED: Fan 1 had a rotation error reported.
25024686: Feb 29 10:33:53.759 India: %FAN-3-FAN_FAILED: Fan 1 had a rotation error reported.
25024687: Feb 29 10:34:13.759 India: %FAN-3-FAN_FAILED: Fan 1 had a rotation error reported.
Cisco VPN :: ASA-6-110003 - Routing Failed To Locate Next Hop
Oct 30, 2012I have a issue with our ASA firewall. I have a firewall which has inside, outside and DMZ interface. I have VPN clients that connect correctly and can acces the internal network. However for the profiles I have setup to connect via VPN to the DMZ network fails with the following messages.
ASA-6-110003: Routing failed to locate next hop
&
ASA-6-302014: Teardown TCP connection......No valid adjacency
I have connections to the DMZ which aren't VPN but are via the outside and internal interfaces with no problem.
The route table has a route to that network, and I have a nat in place
Cisco VPN :: Failed To Load Preferences For ASA 5510
Sep 26, 2012I have been locked out of using my VPN over the past week because of the error "Failed to Load Preferences". Whenever I open the cisco anyconnect and select the current selection or enter in a new connection I get that error. I have tried reinstalling, deleting out the cisco folder from my user account, and running cisco through the web that gives me the error "Web-based installation was unsuccessful. If you wish to install the CIsco Anyconnect VPN Client, you may download an installer package."
View 5 Replies View RelatedCisco WAN :: 7609 - Configuration Failed On Policy Map
Aug 3, 2011Im having this error on the 7609, but for other policy its working.
Code...
Cisco Wireless :: 36021 AP Failed To Register WLC
May 8, 2013I have cisco WLC 5508 on the HQ, now I have another site in different subnet I tried to put AP on it and configure a DHCP pool with option 43 but the AP failed to register the WLC on the HQ.
View 13 Replies View RelatedCisco :: 7921 Certificate Verification Failed
Mar 31, 2009I am trying to install a digi cert on a 7921 and I get the message on import of "certificate verification failed".as there does not seem to be much documentation with the above error message.
View 2 Replies View Related