I've got my ASA 5505 set up right now so that my IPSec clients have to connect using their token as well as username and password. I would like to disable the secondary username and password. Does anyone know if it is possible to have a token only log on?
View 2 Replies
My customer wants to replace some Cisco 2912 by new routers, but I can't find a way to add Token ring Network Module on 2951 or 3925 routers with the Cisco configuration tool.Does token ring is still supported on ISR G2 routers?
View 5 Replies View RelatedI am migrating from ACS 4.2 to 5.2. In 4.2 you could assign one user to auth via Internal Database and another user to auth via Radius Token Server. I cannot find how to do this with 5.2. There is a note in the doc that states 'Identity-related attributes are not available as conditions in a service selection policy'. Does this mean that you can only choose one auth method for all users? If it is possible to have multiple methods, how am I able to accomplish this?
View 1 Replies View RelatedI'm in a dorm room with an outdated token ring connection that includes phone line ports and cable for my television. In other rooms people are using this to convert their laptop/router to an ethernet portIt converts old token ring ports to ethernet.
View 1 Replies View RelatedI work from home and log into my work using a token I get into my work server but it keeps freezing and boots me out. If this makes sense. I have to use my mums laptop windows 7.
View 2 Replies View RelatedI have ACS4 and i am planning to upgrade to ACS5.I would like to have such a rules:I have user1, one ASA device which is VPN concentrator for remote users.ASA have two different tunnel-groups: one which allow for logging via certificate (with mandatory pki authorization thru ACS) with disabled Xauth,and second tunnel-group with allow login thru typical Xauth with authorization thru ACS which users external database (RSA Tokens).So i have one user1 which can login thru VPN using RSA tokencode or certificate.For example: on phone user1 uses certificate, and on PC station the same user1 uses token password.For tunnel-group with pki authorization ASA checks username in ACS and in typical scenario login="CN from certificate" and password="CN from certificate". So we would need "two credentials" for the user - one for pki authorization, and second one external database (RSA token).Is such scenatio possible under ACS 5 ? where one user uses different credentials based on tunnel-group usage ?
View 2 Replies View RelatedWe have a ACS 4.3.2 installed with users authenticating against an Active Directory database. The AD database not only authenticate the users but also assigns the group that is used to select IP address pool.Now the requirements require to use token authentication with SafeNet. This authentication uses the same username but the password is composed of the original password + OTP.The problem is that the SafeNet server doesn't return the group membership.I've read about the Identity Store Sequence in ACS 5.x and I think I could use it in the following sequence:! configure an Authentication Sequence using the SafeNet token server (this works with ACS 4.x)I configure an Attribute Retrieval Sequence against the AD database. This would use the username only, no password and would retrieve the group membership.
View 1 Replies View Relatedcant sign on to my Hotmail
View 1 Replies View Relatedpassword problem no online soulution
View 1 Replies View RelatedI use the right password but nothing works. I can't change it because I can't get any information.
View 1 Replies View Relatedfor two days it will not let me sign into my hotmail account...also two days ago got popup for adobe X?? it would not go away, so I accidently said yes, when it wanted to load onto my computer, I did get it off my computer, but, it keeps popping up and now I cannot get into my personal hotmail account.
View 1 Replies View RelatedI cant sign in to playstation network and when i try i get the message, error code 80710d36.
View 1 Replies View Relatedcant'sign in to yahoo
View 1 Replies View RelatedI am load balancing Terminal Server Windows 2008 sessions with an CSS 11501. The code version is sg0750004 (07.50.0.04). I am trying to establish a Terminal Server session with Single Sign-On (SSO), but without success. Normal login with Username and Password on the TS are functionning, but never SSO session. The environment is: 10 Windows 2008 Terminal Servers (NTS1, NTS2,NTS3...). In DNS I have a host A named TS with IP for balanced CSS. The problem I see is that the client PC opens a TS session to "TS". then dont work SSO, but if client PC open a TS session to NTS1, NTS2...is working fine the SSO I am not sur if we can do something on the CSS.
View 3 Replies View Relatedsm bus controller has come up with an exclamation point how do i fix this
View 1 Replies View RelatedWe are using some desktops as static ip wired and laptops using automaic ip wireless, issue is that in wireless sinal shows yellow marks on laptops no internet but actually getting internet.
View 1 Replies View Relatedjust today my macbook won't sign onto the internet wirelessly even though there are two other computers in this house that can...
View 1 Replies View RelatedI've had a DIR-615 rev b for a while and have had it set up with PPPoE sign on. The DSL modem I am using is a Motorola 2210 setup in bridge mode. All was working well. I recently switched over to dry loop AT&T dsl from AT&T dsl over a voice line.After the switch, I am unable to sign on via PPPoE using the dir-615. If I bypass the router, I am able to gain internet access via modem PPPoE sign on. I've also switched modems (Actiontec DT701D) with the same results. What has changed that would prevent the router from PPPoE sign on? I've verified that all settings on the router were the same before and after the dry loop change (including password).
View 11 Replies View RelatedFollowing a new HDD & install of the OS my Dell 1525 is not showing wifi or bluetooth and is not letting me connect via wireless. I have tried installing drivers but nothing. I can only connect via ethernet. I also tried removing the card and replacing it to ensure it was in correctly but still nothing. The set up menu on boot shows wireless card present and all enabled to factory defaults.
View 6 Replies View RelatedCisco E1000 router.connecting directly to the router, internet works. When connecting wirelessly, it works for about 2 minutes, then I get no connection and a yellow ! in the connection setting icon. No wireless internet will work until I power down and restart the router. Then the same problem continues.Today when trying it, it won't even connect for a few minutes. It shows as "connected" on my laptop but it has the yellow ! and will not access the internet. So I am no longer ever able to connect wirelessly. I've done a hard reset already.
View 15 Replies View RelatedI just purchased the AP1141N and I have created a logon account to access the device via URL which works fine but after 10 minutes it logs me out and requires that I log back on. Unfortunately it won't allow me to log back on unless I reset the device then I have another 10 minutes before it asks me to login again but then it won't accept my logon again without a reset.
I can logon with my account via the console logon but I don't know how to configure the access point via command line so I use the web interface. I have disabled the timing for security but didn't work.
I haven't run into this before and I can't find anything in the documentation regarding it. (Our 2 4710 were setup prior in a routed configuration although I personally see no reason for it.) Regardless, we have 2 servers that host 4 websites on them. We built everything on the ACE with a new VIP and matching the http header. If we use firefox/chrome, it load balances properly and we are prompted for credentials as those browsers don't support single sign on. We enter our credentials and are able to get to the appropriate website on the server. When we use IE, it fails to open the page. A sniffer capture shows an authentication failure packet and a reset and that's it. We built the ACE both as sticky and non-sticky but neither worked properly with IE.
Is there something else in the ACE we need to configure to get SSO to work?
**NEW CONFIGURATION**
probe icmp PING
description ICMP echo request probe
[Code].....
we plan to implement the SMB Pro AP541 for a guest access solution.is there a lobby ambassador like on the big wireless lan controller?is it possible to sign a guest a time frame - e.g. guest user has only 60 min access to the internetis it possible to enter a lifetime for the guest user - e.g. guest user can only login until 10.10.2010
View 2 Replies View Relatednetwork adapter error code 10 in device manager saying the device can not start. window xp/asus mainboard M3A78-CM/AMD Athlon E5200 CPU.Uninstall and reinstall new drivers does not solve the problem.
View 1 Replies View RelatedI have reinstalled windows 7 on my laptop. the problem is that the wi-fi internet is not working anymore. The network icon in the system tray shows a cross sign with a red color. I cant seem to be able to find a solution. Tried all the solutions listed in the forum. When i connect the lan cable directly into the laptop the internet works fine. But as soon as i remove it the cross sign again comes and i cant have internet access. I am having an Atheros Ar9285 Wireless Network Adapter installed in my device manager and everything is fine there with no ? or ! marks. I am using a Belkin router with in built modem.
View 1 Replies View RelatedRegion : UnitedKingdom
Model : TL-WR841N
Hardware Version : V7
Firmware Version :
ISP : Virgin Media
The sun sign on the modem has been flashing for a couple of days but I am still getting the internet. Is there anyway I can find out why its doing this? I have tried rebooting but still starts to flash.
I bought an EA3500 because I found that I did not need the more expensivbe router. The problem that I have now is when I sign in to Cisco Connect Cloud both the old and the new router show up. I would like to remove the old router from the list. The old router shows as:CiscoA3518 [offline]
View 6 Replies View RelatedI have internet connections and i use Firefox now instead of Internet Explorer but whenever i want to sign in the Windows Live Messenger or Yahoo, it won't let me because it says the network is not connected. I used to be able to, even when i have Firefox. I check to see if the network is connected and it always is.
View 7 Replies View RelatedI am using the cisco linksys E1200 WiFi router. when ever I connect my laptop to WiFi, its show Limited connectivity/Yellow Caution sign when connected.
I try to reconfigre it & also in factory default mode it show same.
It has been 4 months my Router " Wag 120n ". The Router Gives Me A yellow Sign on the network Icon Sying " No network Access " and the wireless Led is blinking with 1 sec interval So
- I cant open Router's Home Page
- there is No ping to 192.168.1.1 " General Failure or Host unreachable " response
- The Only way to get connected again is to replug the router from electricity , it works normally for 5 min and the Yellow Sign shows up again
the Solutions I Tried to fix that up :-
1) Hard reset the 30/30/15 reset
2) Firmware re-flashing
3) Trying an old firmware 1.0.0.12 instead of 1.0.0.16
but nothing of those worked the Only thing that worked for like 20 min the firmware upgrade but after that the problem came up again the problem happens to all Computers on the network wired or on wireless happens on all kind of operations systems win7, xp, vista, (Android for mobiles).
I'm suffering from an annoying problem with my E4200 router. I have a DSL connection. I have my DSL modem in bridge mode and I have my router set up to sign into my ISP's PPPoE to avoid double-routing. This set up worked marvelously with my previous WRT54G and WRT610N routers.Now the E4200 signs me out of PPPoE every ten minutes or so. I have the connection setting on "Keep Alive" but it seems to be dropping the connection regularly. I took the router back and was given a replacement. The new router is doing the same exact thing and now I am beyond the 30 day return limit so I'm stuck with the E4200. I'm running the latest firmware 1.0.03
I reinstalled the WRT610N and the connection is steady but the WRT610N has its own problems (devices connected via wireless cannot see wired devices and vice-versa). I'd like my new router to actually work properly. I've ruled out errors on my end and given that two brand new units of the E4200 generated the same problem I tend to believe it is a design error.
i have configured vpn on asa 5505 and 881 router, as per below design,i am seeing the tunnel is built from cisco 881 router for few seconds and the its got delted. but nothing showing in asa.
View 1 Replies View RelatedI've been tasked with setting up an ASA 5505 on our ADSL modem & am very lost. I've put the PPPoE details into the ASA 5505 to authenticate with our ISP, but can't get out through it. I've looked at guides, videos, compared configs
This is the current config...
: Saved:ASA Version 8.2(5) !hostname asaenable password GuuH2OTIRWlZP8z3 encryptedpasswd 2KFQnbNIdI.2KYOU encryptednames!interface Ethernet0/0switchport access vlan 2!interface Ethernet0/1!interface
[Code]....
