D-Link DIR-615 :: Unable To Sign On Via PPPoE
May 3, 2011
I've had a DIR-615 rev b for a while and have had it set up with PPPoE sign on. The DSL modem I am using is a Motorola 2210 setup in bridge mode. All was working well. I recently switched over to dry loop AT&T dsl from AT&T dsl over a voice line.After the switch, I am unable to sign on via PPPoE using the dir-615. If I bypass the router, I am able to gain internet access via modem PPPoE sign on. I've also switched modems (Actiontec DT701D) with the same results. What has changed that would prevent the router from PPPoE sign on? I've verified that all settings on the router were the same before and after the dry loop change (including password).
View 11 Replies
ADVERTISEMENT
Nov 19, 2011
I'm suffering from an annoying problem with my E4200 router. I have a DSL connection. I have my DSL modem in bridge mode and I have my router set up to sign into my ISP's PPPoE to avoid double-routing. This set up worked marvelously with my previous WRT54G and WRT610N routers.Now the E4200 signs me out of PPPoE every ten minutes or so. I have the connection setting on "Keep Alive" but it seems to be dropping the connection regularly. I took the router back and was given a replacement. The new router is doing the same exact thing and now I am beyond the 30 day return limit so I'm stuck with the E4200. I'm running the latest firmware 1.0.03
I reinstalled the WRT610N and the connection is steady but the WRT610N has its own problems (devices connected via wireless cannot see wired devices and vice-versa). I'd like my new router to actually work properly. I've ruled out errors on my end and given that two brand new units of the E4200 generated the same problem I tend to believe it is a design error.
View 9 Replies
View Related
Jun 23, 2011
password problem no online soulution
View 1 Replies
View Related
Mar 21, 2013
Region : UnitedKingdom
Model : TL-WR841N
Hardware Version : V7
Firmware Version :
ISP : Virgin Media
The sun sign on the modem has been flashing for a couple of days but I am still getting the internet. Is there anyway I can find out why its doing this? I have tried rebooting but still starts to flash.
View 4 Replies
View Related
Mar 6, 2012
I'm in an issue w/ on of our ISPs. We're using an ADSL line as a secondary light load line ( 16 MBit, /w PBR in place to separate the 80 and 443 from the business-critical applications running via a SDSL link. ).
I am on a 2611 XM with IOS 12.2, mated to a D-Link 321B modem running in transparent mode. After running smoothly for weeks, for a few days now, every night some time between 2 AM and 4 AM the link would die with the dialer showing:
Virtual-Access1 is up, line protocol is down Hardware is Virtual Access interface [code]....
To my knowledge, the only option to bring it up again is to reload the box . Taking into account that the router is our DHCP server and the date gets reset to 1994, interesting effects are the outcome of resetting the box.
Well, the ISP have checked their gear and keep saying that these report a "port error" ( quite unspecific ) and blame me that I have a wrong. config in place - which is here:
interface Dialer2
description ecotel Bridge
ip address negotiated
no ip proxy-arp
[code]...
View 10 Replies
View Related
Sep 29, 2011
i'm having a problem establishing a pppoe session with a 1812 router. i've tried everything i could find online, even contacted the isp (all they said was that the modem should be in bridge mode, which it is).
View 6 Replies
View Related
Apr 23, 2011
I have a static IP at home and i have setup my Westell DSL modem to bridge - like the ISP told me too. Then i change my 655 to PPPoE username and password, but when i give it the static IP, it won't connect. But when i change it to DHCP, it connects. Is this a Router issue, or a ISP issue. I am leaning toward ISP, but i wanted to check with DLink first.
View 12 Replies
View Related
Nov 18, 2011
I recently purchased a DIR-825 (Hardware Version: B1, Firmware Version: 2.02NA) to replace my WRT54GS v2. I hooked it on my cable modem, configure it and everything went fine until I decided to change my ISP from cable to DSL.They connected my DSL line on Friday. Today I connected an old USRobotics SureConnect ADSL Ethernet Modem 219001 (it is a bridge only model) to the telephone jack and started to configure my DIR-825.Basically I changed WAN settings from DHCP to PPPoE, entered username and password and connected.
Unfortunately, what happened was:
- DIR-825 connected and then - nearly after 2 minutes - the connection was dropped
- testing with only my computer and the modem, everything went fine and fast
- sometimes, DIR-825 rebooted without notice
- sometimes, after saving Internet settings, it would connect only to disconnect a couple of minutes later
- most of the time it remained disconnected, after clicking on Connect (STATUS page), some lights flashed, but internet icon remained orange
Well, after more than 4 hours trying to figure out what was happening, I gave up. Then, after considering buying an ADSL router, I thought about testing my old WRT54GS.Took it from the box, hooked it on the USR modem, reset to factory configuration, configured PPPoE and at the first try it connected. No disconnects, no errors, no problems.So, I have to assume that something is wrong with PPPoE on the DIR-825 in this firmware.
Then it comes to firmware. clicking on Check Now with no internet connection says: "This firmware is the latest version". Talk of misleading!!!. I then downloaded the latest firmware (v 02.06) hoping for a solution. And, watch this! "The uploaded firmware file may not be correct..." So I downloaded another file, same error message. I disconnected the WAN cable because it says also "...it is possible that the gateway may be too busy..", tried to upgrade, same error message. Reset to factory setting, tried to upgrade, same error message.
Maybe the message could say "it is possible that this is a ****py router".I'm giving up and sticking with my old WRT54GS. Maybe someday I can upgrade the firmware and "it is possible" that PPPoE comes to work with my modem and ISP.
View 2 Replies
View Related
Jul 10, 2011
After I am on with Tech Support for 2 hours, they say the router is defective and will not work for Port Forwarding....!!
I have installed these in many locations and have not had a problem. ALL sites had a DHCP WAN.
I have PPPoE here on FIOS, with a great connection, no issues for 4 years. But lately my Intellinet Router has had to be reset 2-3 times a day, so I replaced it with the DIR-655 RevB.
Well, only for a little bit. The Dlink will NOT Port Forward... I need it to look at cameras, Remote Desktop, etc. Tech Support and I tried PF, and Virtual and DMZ with no luck. we tried many ports, with several internal IPs.
I have another DIR-655 in stock and it has the same results...
If I plug the Intellinet back in, all Port Forwarding works fine... no problem at all to any port. BUT it still has reset issues (not related to PF...)
Anyone else have PPPoE out there, with Port Forwarding issues?
I wrote Tech Support to notify me if they ever fix this glitch, and they sent back the instructions for Port Forwarding! Do they even read what we type?
View 2 Replies
View Related
Mar 26, 2013
I'm trying to find out what platforms support Multilink PPP with Link Fragmentation and Interleaving over a single link, when that single link is PPPoE. In searching the documentation, the best information I can find is that it seems to be supported in one direction on the ASR1000 url...Many platforms appear to support PPPoE and also MLPPP w/LFI, but it's not clear that both features are supported on the same link.
The application is a radio that has an Ethernet interface on its terrestrial link, and acts as an Ethernet bridge. Would like to use Multilink PPPoE with LFI in order to provide LFI in order to run VoIP over lower speed links (e.g 256kb). For what it's worth, the radio also supports RFC 5578 PPPoE Extensions for Credit Flow and Link Metrics. It was fairly easy to find what platforms support RFC 5578. But RFC 5578 would be used to support variation in the capacity of the link. If the link speed is fixed, RFC 5578 is not needed. I was trying to find if the set of platforms supported increase if the need for RFC 5578 is taken off the table.
In particular, I'd be interested in the whether the ASR 9000 series supports MLPPP bundles with LFI when the links are PPPoE.
View 1 Replies
View Related
Feb 17, 2012
I have COX cable so DHCP would be the right way. My D-Link 655 wireless router is set for DHCP. I have a choice between PPPoE or DHCP so I pick DHCP. My wireless laptop is trying to connect to the Internet using PPPoE and won't connect. It will connect using Ethernet. How can I get my laptop on the Internet because it shouldn't be using PPPoE for wirerless?
View 1 Replies
View Related
Nov 20, 2011
I have two DIR-615 devices, I want use first device for main AP and DHCP server and PPPoE . And use second device for Repeater.
How to work WPS and Push button on this device.
View 6 Replies
View Related
Jul 4, 2012
I have TP-LINK TL-WR740N router and I am trying to configure it to work with my Broadband cable over PPPOE.The router once configured show status as connected with a proper IP and DNS servers. When I use the routers inbuilt ping utility to ping Google or any other site I get a reply.But when I connect my computer to the router on the LAN port I see no internet on my computer. I am able to ping the router address but not google.I tried disabling all Firewalls and Antivirus I have but problem still the same.Also I tried connecting over WIFI but still no internet.I also called up TP-LINK helpline several time and got my router replaced. They also tried a few settings on my machine but no success.
View 1 Replies
View Related
Mar 31, 2013
Region : Others
Model : TL-WR740N
Hardware Version : V4
Firmware Version : 3.12.11 Build 120320 Rel.51047n
ISP : Blic.net (Banja Luka, Bosnia)
I'm having issues with PPPoE connection. On a daily level, my connection breaks 1-5 times. In the past, it was related to signal problems, but ISP Tech. team fixed this some 10 days ago. Now, whenever I call them they say connection was broken on user request and ask me if I'm running services like torrents.
I don't run torrents and all I have is standard windows update services, nod 32, as well as steam client.
Here's router log from today when last error occured (I "blanked" some user-specific data like my username or MAC address).
773/31/2013 17:04PPPINFOrcvd [proto=0x8057] xxxxxxxxxxxxxxxxxxxxxxxx
783/31/2013 17:04PPPINFOsent [LCP ProtRej]
793/31/2013 17:04PPPWARNINGPPPoE link down
[Code].....
View 3 Replies
View Related
Jan 9, 2013
Region : Iraq
Model : TL-WDR4300
Hardware Version : V1
Firmware Version : LATEST VERSION UPGRADED
ISP : Newroz Telecom
I purchased TP-link, i want to connect with ADSL modem, i connected successfully through pppoe it shows every ip through lan and wan connected, but it doesn't receive packets / bytes from internet, this is the first problem.the second problem is: i use UPS with TP-Link sometimes my electric power is low just with this tp-link it has problem and refreshing the tp-link
View 1 Replies
View Related
Jul 18, 2011
cant sign on to my Hotmail
View 1 Replies
View Related
Jul 9, 2011
I use the right password but nothing works. I can't change it because I can't get any information.
View 1 Replies
View Related
Jan 27, 2013
for two days it will not let me sign into my hotmail account...also two days ago got popup for adobe X?? it would not go away, so I accidently said yes, when it wanted to load onto my computer, I did get it off my computer, but, it keeps popping up and now I cannot get into my personal hotmail account.
View 1 Replies
View Related
Mar 4, 2012
I cant sign in to playstation network and when i try i get the message, error code 80710d36.
View 1 Replies
View Related
May 19, 2011
cant'sign in to yahoo
View 1 Replies
View Related
Jan 24, 2011
sm bus controller has come up with an exclamation point how do i fix this
View 1 Replies
View Related
Jun 22, 2011
I've got my ASA 5505 set up right now so that my IPSec clients have to connect using their token as well as username and password. I would like to disable the secondary username and password. Does anyone know if it is possible to have a token only log on?
View 2 Replies
View Related
Jan 30, 2013
We are using some desktops as static ip wired and laptops using automaic ip wireless, issue is that in wireless sinal shows yellow marks on laptops no internet but actually getting internet.
View 1 Replies
View Related
Feb 15, 2011
just today my macbook won't sign onto the internet wirelessly even though there are two other computers in this house that can...
View 1 Replies
View Related
May 24, 2013
Following a new HDD & install of the OS my Dell 1525 is not showing wifi or bluetooth and is not letting me connect via wireless. I have tried installing drivers but nothing. I can only connect via ethernet. I also tried removing the card and replacing it to ensure it was in correctly but still nothing. The set up menu on boot shows wireless card present and all enabled to factory defaults.
View 6 Replies
View Related
Nov 22, 2011
I am load balancing Terminal Server Windows 2008 sessions with an CSS 11501. The code version is sg0750004 (07.50.0.04). I am trying to establish a Terminal Server session with Single Sign-On (SSO), but without success. Normal login with Username and Password on the TS are functionning, but never SSO session. The environment is: 10 Windows 2008 Terminal Servers (NTS1, NTS2,NTS3...). In DNS I have a host A named TS with IP for balanced CSS. The problem I see is that the client PC opens a TS session to "TS". then dont work SSO, but if client PC open a TS session to NTS1, NTS2...is working fine the SSO I am not sur if we can do something on the CSS.
View 3 Replies
View Related
Jun 5, 2011
network adapter error code 10 in device manager saying the device can not start. window xp/asus mainboard M3A78-CM/AMD Athlon E5200 CPU.Uninstall and reinstall new drivers does not solve the problem.
View 1 Replies
View Related
Dec 10, 2012
Cisco E1000 router.connecting directly to the router, internet works. When connecting wirelessly, it works for about 2 minutes, then I get no connection and a yellow ! in the connection setting icon. No wireless internet will work until I power down and restart the router. Then the same problem continues.Today when trying it, it won't even connect for a few minutes. It shows as "connected" on my laptop but it has the yellow ! and will not access the internet. So I am no longer ever able to connect wirelessly. I've done a hard reset already.
View 15 Replies
View Related
Sep 9, 2012
I have reinstalled windows 7 on my laptop. the problem is that the wi-fi internet is not working anymore. The network icon in the system tray shows a cross sign with a red color. I cant seem to be able to find a solution. Tried all the solutions listed in the forum. When i connect the lan cable directly into the laptop the internet works fine. But as soon as i remove it the cross sign again comes and i cant have internet access. I am having an Atheros Ar9285 Wireless Network Adapter installed in my device manager and everything is fine there with no ? or ! marks. I am using a Belkin router with in built modem.
View 1 Replies
View Related
Jan 17, 2011
I have internet connections and i use Firefox now instead of Internet Explorer but whenever i want to sign in the Windows Live Messenger or Yahoo, it won't let me because it says the network is not connected. I used to be able to, even when i have Firefox. I check to see if the network is connected and it always is.
View 7 Replies
View Related
Dec 18, 2011
I just purchased the AP1141N and I have created a logon account to access the device via URL which works fine but after 10 minutes it logs me out and requires that I log back on. Unfortunately it won't allow me to log back on unless I reset the device then I have another 10 minutes before it asks me to login again but then it won't accept my logon again without a reset.
I can logon with my account via the console logon but I don't know how to configure the access point via command line so I use the web interface. I have disabled the timing for security but didn't work.
View 2 Replies
View Related
Oct 15, 2012
I haven't run into this before and I can't find anything in the documentation regarding it. (Our 2 4710 were setup prior in a routed configuration although I personally see no reason for it.) Regardless, we have 2 servers that host 4 websites on them. We built everything on the ACE with a new VIP and matching the http header. If we use firefox/chrome, it load balances properly and we are prompted for credentials as those browsers don't support single sign on. We enter our credentials and are able to get to the appropriate website on the server. When we use IE, it fails to open the page. A sniffer capture shows an authentication failure packet and a reset and that's it. We built the ACE both as sticky and non-sticky but neither worked properly with IE.
Is there something else in the ACE we need to configure to get SSO to work?
**NEW CONFIGURATION**
probe icmp PING
description ICMP echo request probe
[Code].....
View 10 Replies
View Related
Aug 4, 2010
we plan to implement the SMB Pro AP541 for a guest access solution.is there a lobby ambassador like on the big wireless lan controller?is it possible to sign a guest a time frame - e.g. guest user has only 60 min access to the internetis it possible to enter a lifetime for the guest user - e.g. guest user can only login until 10.10.2010
View 2 Replies
View Related
