I understand that before we can copy the ADI from the FTP server to the CSS, we must create an FTP record file on the CSS identifiying the ADI. But what if I copy the ADI from TFTP server, do I also need to create TFTP record file?
View 3 Replies
I'm looking at replacing a CSS 11506 in a data centre with two Cisco ACE 4710 appliances. One thing that concerns me is the drop in throughput. The 11560 has a maximum throughput of 40Gbps while the ACE we are looking at is only 1Gbps. It seems that the 11506 is able to scale much better?Also, is it possible to run the two 4710s in an active/standby configuration?
View 2 Replies View RelatedI have a web application behind a SSL-offloading CSS 11506 that may require the server to be able to use a SSL connection as soon as it is established. At least I'm troubleshooting a problem that is starting to look like this is a possibility.
The default behavior seems to be to not start the SYN/SYN-ACK sequence with the real server until the client starts talking first (such as send an http get request), even though the SSL termination part is done and ready.
Any way to change this behavior? The scenario is a webapp. Client side starts more than one SSL session to the server, but only uses one immediately. The client knows it has more than one connection and may have told the server so. Like a control plus data channel(s) arrangement. The client opens all the connections (full SSL handshake on all channels), starts using the control channel, and expects the server to start talking on the data channel. However, since the client hasn't sent anything down that TCP connection first... the server doesn't have it.
I don't think this would occur when the server is doing the SSL... as it should have all the TCP connections as soon as the SSL handshakes are done.
I am trying to get a sample command output of "show chassis inventory" for:
CSS 11501
CSS 11503
CSS 11506
We have two pairs of ACE 4710s, one pair running A3(2.4) and the other pair A3(2.0). We plan to upgarde the second pair so that they are running the same image as the first pair (we know they are not the latest, but this is the first step in a larger rollout plan, and to aid some troublshooting for a major issue we are seeing.)
I have details of the upgrade steps, but my question is with regards to the licenses which are now enforced after (2.0). We currently have the following on the first pair, but are these part of the default licenses for (2.4) or would we need to purchase these as well?
ACE-AP-500M-LIC
ACE-AP-C-100-LIC
ACE-AP-OPT-50-K9
ACE-AP-SSL-05k-K9
Am looking to upgrade the software on the ACE30 from: [code]. Any ACE30 guide that explains this. Have looked at the ACE30 configuration guide which I thought would cover this in the section "Managing The ACE Software", however everything else has been covered off except how to go about upgrading the software.
View 1 Replies View RelatedI need to upgrade a pair of ACE30s to 8Gbps.According to the administration guide, there will be no impact.BUT, it states also:
All license installations except one have no adverse impact to an operating ACE. [URL] Ofcourse, nothing is said about which one has impact.I assume it's the 16Gbps license but how to confirm this?
I am in the process of upgrading from v3.2.5 to v4.2.1, i have been follwing the upgrade/downgrade guide forv4(2.0) for my redunanant pair of ACE 4710.everything ok, following procedure after the standby is reloaded and comes up to standby-warm, Iget the license incompatabilty message on the primary.but I cannot telnet back into the standby, i can ping it ok though.I am loathe to go any further, and do the 'ft Switchover all' and reload the primary incase I cannot telnet back into the primary when it comes back up.
View 2 Replies View RelatedEverytime I make a config change to one of the contexts on our ACE20, I get this message: Config Application in Progress. This command is queued to the system
If I run show download info, I get:
context : context1
Interface Download-status
--------------------------------------------------------------
187 In Progress
199 Pending
Regex download optimization status : Couldn't get status[TNRPC Timed out]
It eventually seems to complete, but it takes a very, very long time. We are running Version A2(3.5) [build 3.0(0)A2(3.5)].
Report run via Individual Web server URL’sThe report takes less than 20 minutes (average 15 minutes) to fetch and return the data. This is observed 9 out of 10 times.Report run via ACE Load Balanced URLThe report keeps on running for more than 20 minutes and never completes. The front end keeps showing report is running.The data in general when tested directly by running queries against the database (bypassing the platform) completes in 15-18 minutesThe network connectivity for each and every ports involved (Loadbalancer/Servers) have been throulgly checked.
View 6 Replies View RelatedI am taking an introduction class to CCNA and we are focusing on the Application Layer,and I'm having some difficulty in understanding what is an Application Layer Service. Is the Application Layer Service the same as Application Layer Software?
View 3 Replies View Relatedupgrading from our current WCS version to 7.0.230.0 (not going for NCS at the moment).
View 4 Replies View RelatedI'm trying to upgrade my WCS from 7.0.164.0 to 7.0.172.0 but it keeps throwing me into the manual process because it detects multiple versions. Seems a previous upgrade from 6.0.132 to 7.0.164 did dot remove the 6.0.132 directory or files.
Am I safe to delete the 6.0.132 directory/files and trying again?
I need to upgrade our Wireless Lan Controller to support new APs. I was able to get the new code due to a security advisory on the code we are running now. I am upgrading from 6.0.196.0 to 7.0.220.0 (MD). I have read in some of the technical docs that the WCS has to match the WLC. I cannot find any documentation as to what this entails on the WCS.
WCS version is 6.0.132.0 running on Windows.
What are the prerequisites before doing this? I have to upgrade a router this week if there is an opportunity to move it to a code that is more current that the one the client is currently running which is 12.2(33)SRD4. I see on the Cisco Support site that after this code, everything moves to 15.
View 2 Replies View RelatedI'm planning on upgrading our wireless lan controllers and WCS. I would like to upgrade the controllers to 4.2.209 as our 1020 APs will not be supported by any later version, I think. And, I would like to upgrade our WCS to 6.0.181.0 so it's ready for when we upgrade our controllers to 6.x.x.x after we get some APs that can support it. Is the 6.0.181.0 on the WCS going to give me any problems monitoring or administering the controlllers if they are only 4.2.209?
The Cisco WCS release must be the same or more recent than the controller software release. Upgrade the Cisco WCS first to prevent any unexpected problems. Cisco WCS supports database upgrades only from the following official Cisco WCS releases: [code]
If I upgrade MSE with WCS, do I need only the file : Cisco-MSE-L-K9-7.0.201.204-64bit.bin. Or do I need to upload all the 4 database-installer files also ?
View 1 Replies View RelatedWhat are the prerequisites before doing this? I have to upgrade a router this Wednesday evening if there is an opportunity to move it to a code that is more current that the one the client is currently running which is 12.4(25b). I see on the Cisco Support site that after this code, everything moves to 15.
View 5 Replies View RelatedI am in the process of upgrading my 4402 to version 7.0.230.0 and am confused on the premise of the firmware and the bootloader. From what I currently understand, I can upgrade directly to the 7.0.230.0 firmware from my current 4.2.176.0, then I should upgrade to the latest bootloader image. But I have also seen posts where I should update the bootloader software to the latest version, then put on the latest firmware.
I have seen conflicting reports where I must step through each bootloader version, 4.x to 5.x to 6.x to 7.x to make sure I have all the fixes, but I have also seen instructions, where you can jump to the very latest and the fixes are cumulative.
I am currently running NCS 1.1.1.24 and trying to upgrade to prime 1.3, but running into some issues, i applied the patch ncs_patch-1.1.1.24-upgrade-12.tar.gz, but when i try to acutally upgrade i get the following...
admin# application upgrade PI-upgrade-bundle-1.3.0.20.tar.gz defaultRepo
Save the current ADE-OS running configuration? (yes/no) [yes] ?
Generating configuration...
Saved the ADE-OS running configuration to startup successfully (code)
Looking for simple doc to follow for upgrade iOS image for Cisco Asr 1000. Not worried about downtime. New hardware not in production yet.
View 4 Replies View RelatedI am managing a Cisco 881 with Adv Ip Services ( CISCO881-SEC-K9). It has IOS 15.0(1) M8 on it. I see that there is a new IOS version 15.2M&T that (I think is applicable), and I have read the upgrade procedures for upgrade via USB and TFT.
If I install it will my license for Adv Ip Services be preserved or overwritten. And if the latter, do I need to export it and reapply it? If so, what is the process?
Purchased a new server. Want to carry over DHCP/DNS/DC/SHARES roles from current domain controller to new 2008 it's a small <20 users server. Is there a solid way to transfer Active Directory and Shares and such?maybe image over 2k3 to the 2008 server, and upgrade to 2008?
View 9 Replies View RelatedAm I able to legally download and upgrade software versions still on ASA firewalls?I have not had an issue in the past as this has not effected the license.I cant find anything online saying that you cant due to Cisco's new Software license policy changes.
View 1 Replies View RelatedI have cluster of firewalls which inclueds AIP module and are in production. Due to some issue modules could not be activated. Now I need to activate and udate signature of them. So whether I can do all this activity without effecting my production (Zero downtime).
View 5 Replies View RelatedI am upgrading from 7.0.116.0 to 7.2.110.0 to support the 3602 APs. Is it a different license to upgrade to 7.2.110.0 or can I directly upgrade to 7.2.110.0 without a new license?We currently have a 5508 base license.
View 1 Replies View RelatedCan you upgrade an ASA5505 remotely and can you add Anyconnect support (for mobile VPN access) in conjunction with a pre-existing VPN config (so not to interupt the Cisco VPN Client users)?
View 1 Replies View RelatedI have a wlc 5508 running version 7.0.116.0 that I need to uppgrade to use the CAP2602I AP. I understand that I need to upgrade it to version 7.0.240 before 7.4.100 to avoid loosing HREAP VLAN mappings, and I have also read that i need to install the FUS image [URL]. In what order should this be done? Shlod the FUS image be installed before new firmware ore after firmware or after 7.0.240 but before 7.4?
View 1 Replies View Relatedi recently upgraded our Ciscoworks LMS from 4.0 to 4.1. after i installed the upgrade the admin login doesnt work, neither does any other account. i have tried resetting the password but it doesnt work.
View 3 Replies View RelatedWe are in the middle of upgrading from two PIX's to some new ASA5512X's. To give you some background on the situation we are upgrading these since the PIXs are fairly old. We had one extra that we had to use since one PIX has failed already. The guy that implemented the PIXs orginally was learning how to do so as he went so there is alot of needless config in the PIX, atleast from what I can tell. Another guy that works with me has done some configuration on the new ASAs and has done the majority of it so far. Today we went to install the new ASAs and switch everything over hoping it would work, but that didn't happen. It seems that there is something wrong with our NAT and ACLs somewhere along the lines. The way our network is laid out is that we have two school campus with a site-to-site VPN one is 172.17.0.0/16 and the other is 172.18.0.0/16. We also have a remote-access VPN on both ASA's. When we connected the new ASAs up and brought up the interfaces, nothing on the inside could ping the internet nor the other side. The VPN showed active on the ASA's and each ASA could ping the others outside interface, but that was it. I have posted the configs below.
ASA1:
: Saved
: Written by enable_15 at 04:26:18.240 CDT Tue Mar 12 2013
!
ASA Version 8.6(1)2
[Code].....
I have 100 nos of cisco 1130AG access points and I upgraded the ios for one of the access point.
the existing image is c1130-k9w7-tar.124-21a.JA1
upgraded image c1130-k9w7-tar.124-25d.JA.
what is the advantage of upgrading the ios.and i want to upgrade the image to all the access points at time?
We are about to upgrade Cisco Load Balancer CSS 11501 firmware from current ver, 8.10.4.01 to 8.10.6.02,this is a production line device (a running 24x7 network), upgrading will create unpredictable results even worst the network will go down.
View 1 Replies View RelatedI are currently implementing a new patching schedule (when I say new i mean a company first!!!) and I have identified that the firewalls are all running 8.2(2). I would like to bring these up to the latest version but am a little worried about impact!!! I have setup a test firewall with the config from our live asa's and run the upgrade but have received multiple lines.
View 9 Replies View Related
