Cisco :: Bandwidth Utilization On Topology Diagram Of LMS 4.2?

Feb 12, 2013

I am running LMS 4.2 , using that i am monitering some switches . I am using topology services also. In that i am getting veiw of all connected devices with links. But bandwidth utilization is for those links are not showning in topology veiw .
 
Is there any settings to be done in LMS 4.2.2 or any configuration changes to done on my switches ?  to find the traffic flow  bandwidth utilization.

View 1 Replies


ADVERTISEMENT

Cisco :: Free Software To Create Network Topology Diagram 1231G

Apr 29, 2013

I have a problem where clients cannot roam between Cisco 1231g-e-k9 and recently installed cisco 1242g-e-k9 access points..  On looking at the CDP option on the 1231 and 1242 access points they are all aware of each other.  However if I use the Network View option I see a different picture.  All the 1231 access points can see each other but not see the 1242's.  Network View on the1242 shows all the 1231's but none of the 1242's.  The 1231 are running ver. 12.3(8)JEB and the 1242's are running ver. 12.4(21a)JA1.

View 2 Replies View Related

Getting High Bandwidth Utilization

Sep 18, 2011

I am working as net admin which is i need to monitoring and manage my workplace network( education center )I got a few question about network traffic flow. Here is the issued.I got high bandwidth utilization so high after office hours which is only on night. as we know, after office hours there is no person at the office but the traffic flow on bandwidth utilization is high.what are the possibilities of this issued?

View 1 Replies View Related

How To Measure Bandwidth Utilization

Feb 15, 2011

How to find bandwidth utlization and who consumed bandwidth lot.? Basically ,I would use speedtest.net for speedtest and will ask from ISP for bandwidth utilization.

Is there any way that to measure bandwidth utilization and who consumed lot based on IPaddress?

View 1 Replies View Related

Cisco VPN :: 5520 - Monitoring IPSec Tunnel Bandwidth Utilization

Sep 8, 2011

We have a Cisco ASA 5520 supporting multiple VPNs - both remote-access  and Lan-to-Lan.  We would like to monitor the bandwidth utilization of the IPSec Lan-to-Lan tunnels.

View 3 Replies View Related

Cisco Firewall :: PIX515E - Internal Nodes / Bandwidth Utilization?

Jan 13, 2013

The infrastructure has PIX515E as the Firewall and few Web Servers and Database Servers inside. Is it possible to retreieve information regarding the bandwidth available at the outside interface of PIX (Internet link utilization ) utilized by each of the nodes seperately? I could use SNMP to get the overall data transfer at the Outside interface of PIX but isit possible to get utilization details of individual nodes ? Is Netflow an option ?

View 10 Replies View Related

Cisco :: Using SNMP To Monitor Bandwidth Utilization History ASA 5510

Dec 22, 2008

I matched the traffic statistics on one of my Cisco ASA site-site tunnels with the OID:1.3.6.1.4.1.9.9.171.1.4.3.1.1.25.4142 (cipSecTunHistInOctets).  I was real proud of myself for a few days until I checked the history and found the OID wasnt working.After some troubleshooting I found that the last four digits (4142 in this case) change whenever the tunnel drops and re-establishes itself. Any way to collect tunnel utilization history on an ASA with SNMP?  Is there a different OID I can use thats based on the endpoint IP?

View 2 Replies View Related

Cisco Firewall :: ASA5510 / How To Document The Networks Bandwidth Utilization

Mar 20, 2013

I have been assigned to find out the nature of the network's bandwidth utilazation. Is there a way to analyze traffic and breakdown the traffic on the ASA5510?

View 9 Replies View Related

Cisco Switching/Routing :: 3750Gs / MRTG Bandwidth Utilization Not Same As Sh Interface

Dec 19, 2011

The other day  3rd party supplier ran some stats on our Gigabit link between 2  Cisco catalyst 3750Gs.now the graphs produced showed only a Maximum output of about 100Mbps ( 5 minute intervals) yet when I do a show interface it shows a lot more always 150Mbps and more. So I did my own Perl script  doing an "sh interface" every minute and then graphed it, and the results were a lot different to the MRTG results.Questions: I know MRTG uses SNMP  to get the traffic  is there a bug in the SNMP, what OID does it use?does the "sh  interface" give the correct results?

View 2 Replies View Related

Cisco WAN :: Aironet 1240AG - Setup Guest Network That Is Secure And Limited In Bandwidth Utilization?

Jan 27, 2013

I have a Cisco Aironet 1240AG Access Point and I am trying to setup a guest network that is secure and limited in bandwidth utilization. I see an option under security > SSID Manager on the web interface to select an interface of Radio0-802.11G, Radio1-802.11A or both. Can I put the guest network on the Radio1-802.11A and make it more secure/bandwidth limited or does this option not matter?

View 3 Replies View Related

How To Draw A LAN / WAN Diagram

Jun 8, 2011

How to draw a lan/wan diagram

View 1 Replies View Related

Cisco :: Draw A Diagram For Network?

Nov 13, 2012

I was trying to draw a diagram for my network, when the following problem occurs.When using "show cdp neighbor" command on my primary core switch i see the proper name and interface # of the attached secondary core switch. However, upon using the "show cdp neigh fa1/1 detail" command (fa1/1 is the port i get that is attached directly to the secondary core switch and is the correct int that is connected to it) i get the wrong ip!!! The ip it gives me is not that of the secondary core switch but is that of the asa firewall!! When i go on the secondary core switch and do the same thing i get the same result but it gives me the ip of the 2nd asa firewall instead.

Notes: I am logged in to the management vlan. Firewall vlan is separate as well. asa is also connected to the switches but on different ports.

View 2 Replies View Related

Cisco :: To Add CNA And ASA 5510 On Network Diagram

Dec 12, 2007

Can I add an ASA 5510 to my network diagram on the CNA?If I can, what monitoring and contol can be done on the ASA?The ASA is being managed using SDM.

View 4 Replies View Related

Network Diagram For 50 PCs With Monitoring

Jan 19, 2013

I need A network diagram for 50 PCs with Network monitoring

View 3 Replies View Related

Cisco Firewall :: 5520 - Find DMZ Diagram Recommended By It?

Feb 18, 2013

I have implemented ASA 5520 as the main firewall. The outside interface is connected to a cisco router and the router is connected to an ISP. I want to make my security system more secure. Which product is the best as the internet gateway solution. Which licenses are required for this one and what is the,cost for each license. Where can I find the DMZ diagram recommended by cisco ?

View 1 Replies View Related

Linksys Wireless Router :: Diagram Showing Antenna Position / Signal Pattern From EA2700

Apr 26, 2012

Any diagram showing the antenna position or signal pattern from the EA2700?  I know that Cisco recommends that the unit be placed "near the ceiling" but I'm looking for more specific information.  Should the unit be mounted vertically or horizontally.

View 1 Replies View Related

Wireless :: Network Diagram 2computers 1printer Wireless

Aug 11, 2011

1 wireless notebook 1 wireless laptop 1wireless printer 1 router.laptop will not print notebook will why?

View 1 Replies View Related

Bandwidth Test For 1 Mbps Bandwidth Line?

Sep 9, 2011

We have 1 mpbs bandwidth line, but most of the time we are getting only 300-500 kpbs download speed, i want to send statistics report to our ISP, what will be best procedure to test the bandwidth report, i have checked in some websites like bandwidthplace and speedtest but these sites are not accurate, how to check the actual bandwidth we getting from ISP against 1 Mbps. We have solarwinds monitoring tool in this i have configured the WAN interface for 1 mbps

View 5 Replies View Related

Cisco :: LMS 4.2 Topology Data Collection

Mar 20, 2012

i have an issue with the lms 4.2 Topology Data Collection. After installation the Topology Data Collection was running normaly, but since first server reload the Topo Data Collect under Inventory > Dashboards > Device Status > Collection Summary is "frozen".Is there any option to stop this process elsewhere? I cannot find anything under jobs in running state or so. Clicking on Schedule only give me the option to start data collection, but lms always returns that the process is running.

View 9 Replies View Related

Cisco :: LMS 4.2 - Devices Not Connected To Topology

Nov 26, 2012

1)i have problem in LMS 4.2 , he  shows most devices not connected to topology sitting lonly even though the have cdp enable , how to force these to join the topology
 
2)why some devices are shown unreachable , even though i can ping them from lms server and gets reply, also they have community and cdp configured

View 1 Replies View Related

Cisco :: LMS 4.0.1 - Telnet From Topology Services Map

Dec 19, 2011

On a LMS 4.0.1 :I want to know what is the right way to change the telnet program on the campus mgr map (topology services map), when right-clicking a device icon and selecting telnet.I would like to use a tool of mine, and not to launch a telnet command from the IE browser.I changed the default telnet of Windows in the registry, but the program is still launched as a telnet URL in the browser and this is not what I would like to do.

View 2 Replies View Related

Cisco :: LMS 4.1 - WAN Links In Topology View?

Mar 12, 2012

The regular problem with the LMS topology and WAN Links when you see the branches are disconnected from the HQ BUT in my case the branches are already connected via Layer2 links but unfortunately some intermediate layer2 modem/switch exist in some branches which prevent CDP discovery but you will find both HQ and branch router in the same subnet .

View 1 Replies View Related

Cisco :: 2960 LMS 4.1 Did Run Topology Service

Jun 20, 2012

i have only 1 switch 2960 POE at customer enviroment.i did run topology service and checked on the right side POE CAPABLE Devices
 
it shows me that i have 4 switch POE while actually there is only 1 switch POE in real enviroment.

View 7 Replies View Related

Cisco :: Cannot Open Topology Service LMS 4.1

Feb 4, 2012

have ether-channel across 2 switches?i am new in cisco LMS . now i am in client site  installing cisco LMS 4.1 in UCS server-rack version. we did it well for  the installation, and the LMS working properly until i cannot open  topology service.
 
i attached the error message

View 14 Replies View Related

Cisco :: Does Disabling CDP Affect LMS 4.0 Topology

Feb 14, 2012

I have a customer who wants to disable cdp on all switches for securtity reasons. The same customer has also LMS 4.0 installed.
 
When disabling cdp, does it affect the topology services on LMS? Can you still see the topology tab on device manager or the topology map of the entire network?

View 4 Replies View Related

Cisco :: EIGRP / Static Route In Same Topology?

Oct 13, 2012

I config the routers with EIGRP and also write Static route between two PC before remove the link between router0 and router1 , destination is reachable , but when remove this connection , packet from pc1 to pc0 will drop in a loop and never reach to destination , is it possible to have a Link state routing protocol and static route at the same network like this scenario , how to prevent loop in this topology static route is configure as bellow :

router0 <==> router 1 <==> router2 <==> router3 <==> router <==>pc1

View 6 Replies View Related

Cisco :: LMS 4.2.1 - Tunnels Missing In Topology View

Jun 12, 2012

I have problem with topology view in LMS 4.2.1, it doesn't show the tunnels connecting branches, though both devices are shown in sh cdp neighbour command output. If I choose Show Devices in Admin > Collection Settings > Data Collection, it is showing cdp neighbours correctly.

View 4 Replies View Related

Cisco :: LMS 4.0.1 Topology Services Not Running On Windows 7?

Sep 19, 2011

I installed LMS 4.0.1 and every module works from the local server. Http login from a remote system, topology services does not start, complains about java version. I followed the link to install the java version, it then complains about some Ansiserver stuff.
 
the client os is win7 64 bits, eplorer version is 7.

View 1 Replies View Related

Cisco :: LMS 3.2 Devices Appear In Topology And Reports By IP Not Hostname

Jun 14, 2012

i have a problem that i see the devices by ip not hostname in devices report and topology and i checked in device discovery to appear by hostname

View 2 Replies View Related

Cisco :: Unable To Launch Topology Services LMS 4.0

Nov 7, 2011

When i try to launch topology services in LMS 4.0 i get prompted to install a java plugin. When i install this it tells me to restart the browser but nothing is changed, it asks me if i want to install the java plugin again.

View 7 Replies View Related

Cisco Routers :: Possible To Use RV042G For Attached Topology

Mar 24, 2013

I'm trying to make an attached topology. This router should be attached to 2 different ISPs on both WAN interfaces (ISP1 with IP address - A.B.C.D, and ISP2 with IP W.X.Y.Z) and I want to use DMZ, too. My idea is to make a L2/L3 segmentation with 2 VLANs - Vlan RED for DMZ (private network 192.168.1.0/24)  and vlan BLUE for Internal network (network 192.168.2.0/24). I checked in the manual that vlans are supported, but I can't see anything about 802.1q, can I use one trunk port or I should use 2 physical cables?
 
There should be inter-vlan routing and basic stateful firewall, so PCs in Vlan Blue should be able to initiate connections to DMZ servers, but the opposite should be denied. Router should make a port forwarding on its both WAN interfaces and forward incomming traffic (from Internet) to DMZ servers (with NAT). Both DMZ servers and internal PCs should have an internet access with NAT over both WAN uplinks.
 
Can I use RV042G for this setup and if not at all - are there any cisco SMB device which can do this?

View 5 Replies View Related

Cisco :: LMS 4.1 Topology View N7K Missing Links

Oct 17, 2011

I work with the topology view in LMS 4.1. I can see all the links between the differrent switches (N7K, 3750, 3040).I miss only the links between the different N7K's. This links have one special thinks: they are configured as "  rate-mode dedicated force" In the N7K cli this interfaces are displayed with the SN too.

sw-bb13# show cdp ne.The links to sw-bb11 and sw-bb21 are not painted in the topoloyview.

View 3 Replies View Related

Cisco WAN :: 65000 BGP Confederation / Configuration And Topology

Jan 15, 2012

Attached is BGP confederation configuration and Topology. They are taken from "Routing TCP/IP Volume 2" book.AS 65000 is designed as a backbone AS connected to non-backbone AS 65535, 65534 and 65533. All are member AS's in AS 1200.I have couple of questions as i think some parts of Sunshine's and Talisman's configurations are incorrect.
 
1. The next-hop-self keyword is mentioned only for Panorama router, why the keyword wasn't mentioned for Nakiska and Talisman routers? .. As we know, the next hop is preserved throughout the confederation, therefore, next hop self should be configured in all member AS's inside the confederation. The same thing with Talisman, why the next hop keyword wasn't mentioned for Lakeridge and Sunshine?
 
2. Why the remote-as keyword wasn't mentioned for Panorama in Sunshine's configuration while the keyword was mentioned correctly for every neighbor routers in Talisman's configuration?
 
3. I don't understand the below statements that are stated in the book, as it conflicts with the rule "MEDs are preserved throughout the confederation"
 
"AS 65000 can safely send MEDs to AS 65535. A route that includes 65000 in its AS_PATH is not accepted by Sunshine or Talisman, so MEDs sent from those routers to AS 65535 are not seen by other member AS's".

View 3 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved