Cisco WAN :: Aironet 1240AG - Setup Guest Network That Is Secure And Limited In Bandwidth Utilization?
Jan 27, 2013
I have a Cisco Aironet 1240AG Access Point and I am trying to setup a guest network that is secure and limited in bandwidth utilization. I see an option under security > SSID Manager on the web interface to select an interface of Radio0-802.11G, Radio1-802.11A or both. Can I put the guest network on the Radio1-802.11A and make it more secure/bandwidth limited or does this option not matter?
View 3 Replies
ADVERTISEMENT
Apr 28, 2011
I'm wondering if there is a way to prioritize traffic on the router's main WiFi over the guest zone or if there is a way to limit the bandwidth on the guest zone.
Ideally, I'd like to keep a locked primary WiFi for high-speed usage (I know, nothing it really ever secure) and an open guest zone for low-speed usage to whomever wants it. As far as I can tell, the DIR-655 doesn't support this kind of configuration.
View 2 Replies
View Related
Oct 8, 2012
We have Cisco Aironet 1240AG Wireless AP's in out network. Now, we have some PC's, laptops and mobile phones connected with with this AP and all devices are working fine. Now suddenly from today when I am trying to associate some new devices to the AP it is not working means the devices are not associating.
View 2 Replies
View Related
Jan 31, 2012
I have a "standart" settings of Cisco Aironet 1240AG with ENABLED broadcasting SSID, encryption is WPA2 (AES). I can see the wifi network (ssid) with windows system but with MAC OS 10.5 and MAC OS 10.7 also with iPhone the wifi is acting like hidden. But If I manually enter the wifi ssid and set the proper encryption the connection work normally. Also I have a separete windows partition on one MACbook and this windows 7 have no problem to see the SSID of my network. But If i Boot to the MAC OS the WIFI is "hidden" until the manually connection. (same problem on iphone, manuall connect with manually entered SSID is working well).
View 2 Replies
View Related
Nov 19, 2012
I have a 2504 WLC and x6 1142 AP's and currently have this working on our corporate network (still in test phase). So far so good and looking at authentication via radius next for this.
We have a separate ADSL connection that is external to the corporate network and what i would like to do is based on SSID (in this case i'll use "Guest Access") i would like any clients etc that visit to be able to connect to our wireless but not be able to connect to our corporate network.
View 4 Replies
View Related
Sep 28, 2012
For 2 year now we have been running aironet 1240ag access points throught our warehouse. We use a telnet session on our handheld scanners to connect to our database on the main server.This last week our scanners started getting dropped from the access points serveral times throught the day and often would continue to get dropped at 1 minute intervals for several minutes at a time. This appears to be happening on all of our access points and is affecting all of our scanners but not at the same time.Each time a clinet is dropped we get the following event log on the AP.
Sep 29 11:57:14.807 -0500 Warning Packet to client 0c77.1a3a.6ff7 reached max retries, removing the client
Sep 29 11:57:14.800 -0500 Information Interface Dot11Radio0, Deauthenticating Station 0c77.1a3a.6ff7 Reason: Previous authentication no longer valid
All the AP's are setup the same with the below config
!! Last configuration change at 14:24:18 -0500 Sat Sep 29 2012 by Cisco! NVRAM config last updated at 14:24:18 -0500 Sat Sep 29 2012 by Cisco!version 12.4no service padservice timestamps debug datetime msecservice timestamps log datetime msec localtime show-timezoneservice password-encryption!hostname AP_10!enable secret 5 $1$lcac$OO/IqOlgR2.TPP/BFg7nX1!no aaa new-modelclock timezone -0500 -5!!dot11 syslogdot11 activity-timeout unknown default 128dot11 activity-timeout client default 128dot11 activity-timeout repeater default 128dot11 activity-timeout workgroup-bridge default 128dot11 activity-timeout bridge default 128!dot11 ssid jefferson377 authentication open guest-mode infrastructure-ssid optional!power inline negotiation injector 9caf.ca01.d818power inline negotiation prestandard source!!username Cisco privilege 15
[code]....
View 9 Replies
View Related
Apr 11, 2011
What is the average/maximum distance coverable by Aironet 1300 and 1240AG ???
View 3 Replies
View Related
Aug 17, 2011
I have a Aironet 1240AG and have our main SSID set up on Radio0-802.11G. It uses WPA TKIP. Everything works fine on it. Recently we have been getting a lot of visitors who need wireless access, so reather than hand out our main key to visitors, I decided to create another SSID on Radio1-802.11A for guests. For some reason the new SSID does not show up on the available networks on client devices. You can connect to it manually by entering the name and key. But how do I get the SSID to broadcast on the 2nd SSID. A lot of these guests are not very computer smart, so it becomes a real pain to have to walk them through connecting to the guest network.
View 3 Replies
View Related
Apr 29, 2013
We are using an Aironet 1240AG series wireless AP here to connect handheld scanners. They work fine on WPA. However, when we switch to WPA2, they often lose connection. We have tested on 802.11g and a bands, with various encryption types (TKIP, AES, TKIP/AES). Also, how can I update the outdated firmware without signing up for a service contract?
View 3 Replies
View Related
Apr 8, 2013
I have a question regarding cisco aironet 1240ag AP.
1st - Does this devices has a firmware ? So I can update a firmware ? or is an image file for IOS software ?
2nd - Which wireless controller I can use to handle multiple aironet 1240ag AP's ?
3rd - The controller has the ability to create temporally guest password ?
View 5 Replies
View Related
Jan 23, 2013
I work as Network administrator in a building products plant at Poland. We had core switch HP Procurve 6200yl with 5 vlans, and 11 Aironet 1240AG Access points without controller. I have a problem with create 2 wi-fi VLANs on the Cisco AP's and linked it with HP switch.
VLANs on the switch:
1 - Default (for office sutff) - working great,
2 - Production (for production stuff) - working great,
3 - Inter (for Router's) - working great,
4 - WMS - i need configure it as wireless,
5 - WiFi with Radius - i need configure it as wireless.VLANS on the Access Points:
4 - WMS - for warehouse terminals - WPA2,
5 - WiFi for office stuff with Radius.
I'm easily able to get it running a single SSID (non-VLAN) network and confirm that I can use that network fine. However, I need to set up these 2 VLANs. I can connect to it via telnet if that'll let me program it faster.
View 2 Replies
View Related
Nov 2, 2012
I just installed my EA4500 router and it was amazingly simple. My only question is it shows two wireless connections available: The secured one I set up and the another network with the same name that says "guest" and is NOT secured. Is there a way to either disable the unsecured guest network or to secure the guest network?
View 2 Replies
View Related
May 8, 2007
I am an IT professional that is installing my first extended range wireless AP in my companies warehouse. I am very excited!
Now I have set up many a linksys and repeater wireless networks, so when I was looking into the Aironet 1240AG I thought ?No Problem!?
And at first, it is not!
I have the AP and antenna set up here in my office before I take it out and mount it in the warehouse. And I can get connected to it, no security for now, no filters, I just want to connect and make it work.
I stay connected for maybe 3 minutes, I can get to the internet, I can ping all my servers. Full connectivity. But then for no reason the connection fails and I cannot reconnect.
The error I get in the log is
Interface Dot11Radio0, Deauthenticating Station 0006.2510.bbe3 Reason: Previous authentication no longer valid
So strange! So I have reset the AP to factory defaults and then set the SSID, and I can connect, again for a second, then nothing.
I have tried with multiple wireless cards, even laptops. Thinking maybe the problem was on the computer side.
View 12 Replies
View Related
May 6, 2013
I have setup an aironet 1262 with my ASA 5512 and configured it as an access point. I would like to add an additonal network to the ap for guests to use but I would like to segregate the traffic and only allow it to the internet. I am not sure how to start this and go about setting the routes, security and address scope.
View 1 Replies
View Related
Dec 30, 2012
I currently use a E2500 router for my home network. I have setup the Wireless guest Network for my downstairs Tenant while he is out of work so he can still have some internet. The problem however is that often the guest network will take up 90% of my 55mb/sec bandwidth, leaving none for the primary network. Is there a way for me to Throttle the amount of bandwidth the Guest network can use? Say alot 10mb/sec for Guest access only, and leave the rest for our main network?
View 6 Replies
View Related
Sep 18, 2011
I am working as net admin which is i need to monitoring and manage my workplace network( education center )I got a few question about network traffic flow. Here is the issued.I got high bandwidth utilization so high after office hours which is only on night. as we know, after office hours there is no person at the office but the traffic flow on bandwidth utilization is high.what are the possibilities of this issued?
View 1 Replies
View Related
Feb 15, 2011
How to find bandwidth utlization and who consumed bandwidth lot.? Basically ,I would use speedtest.net for speedtest and will ask from ISP for bandwidth utilization.
Is there any way that to measure bandwidth utilization and who consumed lot based on IPaddress?
View 1 Replies
View Related
Feb 12, 2013
I am running LMS 4.2 , using that i am monitering some switches . I am using topology services also. In that i am getting veiw of all connected devices with links. But bandwidth utilization is for those links are not showning in topology veiw .
Is there any settings to be done in LMS 4.2.2 or any configuration changes to done on my switches ? to find the traffic flow bandwidth utilization.
View 1 Replies
View Related
Apr 6, 2010
I just installed my new Cisco E3000 and configured it over the HTTP interface, as I have on previous routers. I am unable to find any setting for the "Guest" wireless network (outbound internet only), or the Parental controls. Both of these are features of interest, and they're simply not listed in any of the web-based settings.
Puzzled, I did a Factory Reset and configured it via the Cisco Connect instead.. this had the Guest feature and Parental controls, but none of the other features I need, like QOS, or Port Forwarding, or DHCP disable.
It seems like the Web interface only configures some settings, and the Cisco Connect configures other settings, but I can't use them both.
Where does one set up the additional password for Guest access? Other than this, the router works fine on 2.4 & 5 GHz, nice..
View 9 Replies
View Related
Apr 2, 2012
I have a requirement to set up a guest SSID for contractor so that they can use the internet while in the office.
Security say that all traffic on this SSID should be isolated and directed straight to the firewall, with no chance of contamination into the company network infrastructure.
With the 5508, my understanding is using the setting up a guest account functionality built in will achieve this, but all traffic would end up at the wireless controller. How do I then put a direct forward for all traffic to the firewall which will only affect the guest traffic?
View 7 Replies
View Related
Sep 8, 2011
We have a Cisco ASA 5520 supporting multiple VPNs - both remote-access and Lan-to-Lan. We would like to monitor the bandwidth utilization of the IPSec Lan-to-Lan tunnels.
View 3 Replies
View Related
Jan 13, 2013
The infrastructure has PIX515E as the Firewall and few Web Servers and Database Servers inside. Is it possible to retreieve information regarding the bandwidth available at the outside interface of PIX (Internet link utilization ) utilized by each of the nodes seperately? I could use SNMP to get the overall data transfer at the Outside interface of PIX but isit possible to get utilization details of individual nodes ? Is Netflow an option ?
View 10 Replies
View Related
Dec 22, 2008
I matched the traffic statistics on one of my Cisco ASA site-site tunnels with the OID:1.3.6.1.4.1.9.9.171.1.4.3.1.1.25.4142 (cipSecTunHistInOctets). I was real proud of myself for a few days until I checked the history and found the OID wasnt working.After some troubleshooting I found that the last four digits (4142 in this case) change whenever the tunnel drops and re-establishes itself. Any way to collect tunnel utilization history on an ASA with SNMP? Is there a different OID I can use thats based on the endpoint IP?
View 2 Replies
View Related
Mar 20, 2013
I have been assigned to find out the nature of the network's bandwidth utilazation. Is there a way to analyze traffic and breakdown the traffic on the ASA5510?
View 9 Replies
View Related
Feb 26, 2013
Just got a new EA3500, and plan to use its guest network feature to allow Internet access but not access to my LAN. Wondering if I can set it up so that users on the guest network bring up a particular website when they open their browser.
View 3 Replies
View Related
Dec 19, 2011
The other day 3rd party supplier ran some stats on our Gigabit link between 2 Cisco catalyst 3750Gs.now the graphs produced showed only a Maximum output of about 100Mbps ( 5 minute intervals) yet when I do a show interface it shows a lot more always 150Mbps and more. So I did my own Perl script doing an "sh interface" every minute and then graphed it, and the results were a lot different to the MRTG results.Questions: I know MRTG uses SNMP to get the traffic is there a bug in the SNMP, what OID does it use?does the "sh interface" give the correct results?
View 2 Replies
View Related
Nov 13, 2011
Purchased E4200 this week and did simple setup via CD setup (Cisco connect). Set up main name and password. Cisco Connect assigned "-guest" to end of main name for the guest account. Gave guest account its own password. Both main and guest accounts were broadcasting OK -- but guest account was not secure and could be accessed without password. (All software and firmware upgrades were done during initial setup).Reset the E4200 and restarted things from the CD setup. Created main account, main account password, and guest password again. In advanced settings, left basic wireless settings at initial settings, changed wireless secutiy to WPA2 Personal. Still having the guest account being broadcast in unlocked status. (Have turned off guest access for now until I can get password protection for it).
View 1 Replies
View Related
Aug 9, 2012
Just put in an SF302-08P switch with two AP541N's. Just a Comcast modem connects into the switch along with the two WAPs, nothing else. Speedtest through the cable modem with nothing plugged into it is 48Mbps. Then connecting a single laptop via the switch shows a speedtest of 33Mbps. Then with the two AP541N's plugged in and using the same laptop over WiFi, I'd consistently seen 10Mbps for downloading. But going right back to the cable modem directly showed me close to 50Mbps in a speed test.
Have factory defaults in all the Cisco devices, and poured over the settings and it looks like bandwidth limiting is disabled. Suspecting maybe it is for QoS and to optimize voice, but I see definite places in the devices where I could designate optimizing voice and those aren't enabled. Then started thinking with tweaking the wireless frequencies, but didn't want to do anything too unstable.
View 2 Replies
View Related
Nov 6, 2011
I have a linksys WRT54GL with the latest firmware. I know QoS feature can limit bandwidth based on priority. But QoS feature is only for wired network, is there any good ways to limit bandwidth?
View 14 Replies
View Related
Dec 31, 2011
Having just installed the E1000 why have I got a public network address '####' which is security type WPA2 -PSK and also public network address '#### - Guest' which is security type - unsecured.Anyone can log onto either wireless network connection but only with the correct password.How do I remove the '####' address and also how do I make the '#### - Guest' address a secure one.
View 1 Replies
View Related
Feb 12, 2013
How would I configure a "guest" wireless network, with a different key/password, that uses a different subnet than the existing network?
We have a simple 192.168.1.x subnet currently, with the Aironet as our only AP. The Aironet support a "guest" wireless function, but how do I make that work with the RV180?
View 1 Replies
View Related
May 17, 2004
how i can limit the bandwidth for a all my client conect to the AP, i have a Aironet 1200 with the 12.2.15 code.
View 3 Replies
View Related
Aug 20, 2012
I run a business and have customers who would like to use my wireless internet. I previously had a completely open network that I would allow them to use, until someone illegally downloaded a movie and got us in trouble. I would like to allow use of the network again, but limit activities like this. Basically, so they could only do basic web browsing, etc.
View 1 Replies
View Related