Cisco :: Aironet 1300 And 1240AG Coverage Distance
Apr 11, 2011What is the average/maximum distance coverable by Aironet 1300 and 1240AG ???
View 3 RepliesWhat is the average/maximum distance coverable by Aironet 1300 and 1240AG ???
View 3 RepliesI have been searching online for the maximum coverage (distance) of WAP4410N
View 1 Replies View RelatedWe have Cisco Aironet 1240AG Wireless AP's in out network. Now, we have some PC's, laptops and mobile phones connected with with this AP and all devices are working fine. Now suddenly from today when I am trying to associate some new devices to the AP it is not working means the devices are not associating.
View 2 Replies View RelatedI have a "standart" settings of Cisco Aironet 1240AG with ENABLED broadcasting SSID, encryption is WPA2 (AES). I can see the wifi network (ssid) with windows system but with MAC OS 10.5 and MAC OS 10.7 also with iPhone the wifi is acting like hidden. But If I manually enter the wifi ssid and set the proper encryption the connection work normally. Also I have a separete windows partition on one MACbook and this windows 7 have no problem to see the SSID of my network. But If i Boot to the MAC OS the WIFI is "hidden" until the manually connection. (same problem on iphone, manuall connect with manually entered SSID is working well).
View 2 Replies View RelatedFor 2 year now we have been running aironet 1240ag access points throught our warehouse. We use a telnet session on our handheld scanners to connect to our database on the main server.This last week our scanners started getting dropped from the access points serveral times throught the day and often would continue to get dropped at 1 minute intervals for several minutes at a time. This appears to be happening on all of our access points and is affecting all of our scanners but not at the same time.Each time a clinet is dropped we get the following event log on the AP.
Sep 29 11:57:14.807 -0500 Warning Packet to client 0c77.1a3a.6ff7 reached max retries, removing the client
Sep 29 11:57:14.800 -0500 Information Interface Dot11Radio0, Deauthenticating Station 0c77.1a3a.6ff7 Reason: Previous authentication no longer valid
All the AP's are setup the same with the below config
!! Last configuration change at 14:24:18 -0500 Sat Sep 29 2012 by Cisco! NVRAM config last updated at 14:24:18 -0500 Sat Sep 29 2012 by Cisco!version 12.4no service padservice timestamps debug datetime msecservice timestamps log datetime msec localtime show-timezoneservice password-encryption!hostname AP_10!enable secret 5 $1$lcac$OO/IqOlgR2.TPP/BFg7nX1!no aaa new-modelclock timezone -0500 -5!!dot11 syslogdot11 activity-timeout unknown default 128dot11 activity-timeout client default 128dot11 activity-timeout repeater default 128dot11 activity-timeout workgroup-bridge default 128dot11 activity-timeout bridge default 128!dot11 ssid jefferson377 authentication open guest-mode infrastructure-ssid optional!power inline negotiation injector 9caf.ca01.d818power inline negotiation prestandard source!!username Cisco privilege 15
[code]....
I have a Aironet 1240AG and have our main SSID set up on Radio0-802.11G. It uses WPA TKIP. Everything works fine on it. Recently we have been getting a lot of visitors who need wireless access, so reather than hand out our main key to visitors, I decided to create another SSID on Radio1-802.11A for guests. For some reason the new SSID does not show up on the available networks on client devices. You can connect to it manually by entering the name and key. But how do I get the SSID to broadcast on the 2nd SSID. A lot of these guests are not very computer smart, so it becomes a real pain to have to walk them through connecting to the guest network.
View 3 Replies View RelatedWe are using an Aironet 1240AG series wireless AP here to connect handheld scanners. They work fine on WPA. However, when we switch to WPA2, they often lose connection. We have tested on 802.11g and a bands, with various encryption types (TKIP, AES, TKIP/AES). Also, how can I update the outdated firmware without signing up for a service contract?
View 3 Replies View RelatedI have a question regarding cisco aironet 1240ag AP.
1st - Does this devices has a firmware ? So I can update a firmware ? or is an image file for IOS software ?
2nd - Which wireless controller I can use to handle multiple aironet 1240ag AP's ?
3rd - The controller has the ability to create temporally guest password ?
I work as Network administrator in a building products plant at Poland. We had core switch HP Procurve 6200yl with 5 vlans, and 11 Aironet 1240AG Access points without controller. I have a problem with create 2 wi-fi VLANs on the Cisco AP's and linked it with HP switch.
VLANs on the switch:
1 - Default (for office sutff) - working great,
2 - Production (for production stuff) - working great,
3 - Inter (for Router's) - working great,
4 - WMS - i need configure it as wireless,
5 - WiFi with Radius - i need configure it as wireless.VLANS on the Access Points:
4 - WMS - for warehouse terminals - WPA2,
5 - WiFi for office stuff with Radius.
I'm easily able to get it running a single SSID (non-VLAN) network and confirm that I can use that network fine. However, I need to set up these 2 VLANs. I can connect to it via telnet if that'll let me program it faster.
I have a cisco aironet 1300 series and i need to reset it back to factory default. the directions say push the mode button while the access point is off and then turn it on while the mode button is down.
View 1 Replies View RelatedI've been getting warning messages from the event log of a 1300 series bridge, which is set as an Access Point in the network, states: 'Packet to client (mac address) reached max retries, removing the client'; I'm not sure why the client is removed. Does 'reached max retries' mean that the client has tried to many times to connect to the AP/Bridge?
View 1 Replies View Relatedis the aironet 1262 access point a good choice for an environment of about 20 users. each users is in an office and we are looking at deploying the ap at the end of the hall on a wall mount. would distance be a barrier and are there any better options out there?
View 3 Replies View RelatedI am an IT professional that is installing my first extended range wireless AP in my companies warehouse. I am very excited!
Now I have set up many a linksys and repeater wireless networks, so when I was looking into the Aironet 1240AG I thought ?No Problem!?
And at first, it is not!
I have the AP and antenna set up here in my office before I take it out and mount it in the warehouse. And I can get connected to it, no security for now, no filters, I just want to connect and make it work.
I stay connected for maybe 3 minutes, I can get to the internet, I can ping all my servers. Full connectivity. But then for no reason the connection fails and I cannot reconnect.
The error I get in the log is
Interface Dot11Radio0, Deauthenticating Station 0006.2510.bbe3 Reason: Previous authentication no longer valid
So strange! So I have reset the AP to factory defaults and then set the SSID, and I can connect, again for a second, then nothing.
I have tried with multiple wireless cards, even laptops. Thinking maybe the problem was on the computer side.
I have two Cisco Aironet 1310. I wonder which is the maximum distance I can put between them, to an acceptable data transmicion to 54 megabytes or less, using thier internals antennas.
View 2 Replies View RelatedI have a Cisco Aironet 1240AG Access Point and I am trying to setup a guest network that is secure and limited in bandwidth utilization. I see an option under security > SSID Manager on the web interface to select an interface of Radio0-802.11G, Radio1-802.11A or both. Can I put the guest network on the Radio1-802.11A and make it more secure/bandwidth limited or does this option not matter?
View 3 Replies View RelatedI have two 1130 AGs and would like to have one connected to a wired net with wireless clients on the G radio, and connected to the other using the A radio, and it having clients on it G radio.
View 1 Replies View RelatedAironet 2600 and 3600 series. I need to know their maximum distance (at least theoretically, in Line of sight, eliminating all other factors...) in order to choose the right number of AP to provide enough coverage for a specific area. If an exact number is not available then can you show me how to determine it?
View 8 Replies View RelatedWhat are the pros and cons of 2.5 Ghz and 5Ghz spectrum ,My customer wants 1240AG and the antenna for those are either 2.5 GHz or 5GHZ and wants to know which spectrum is better for him to use
View 2 Replies View RelatedCisco 1240AG converting to WEP to WPA
Access Point Model: Cisco 1240AG
System Software Filename: c1240-k9w7-tar.123-7.JA5
System Software Version: 12.3(7)JA5
Bootloader Version: 12.3(7)JA1
Access Point Model: Cisco 1131AG
Software: Cisco Aironet Desktop Utility 2.1.02
After converting encryption from WEP to WPA in a Cisco 1240AG in personal mode with an SSID name of example1 and Cisco 1131AG access point in personal mode with an ssid of example2; both with the same wpa passphrase, I created a new profile on the Cisco Aironet Desktop Utility with a new profile name as well as a WPA passphrase, but the desktop utility will only connect to the access point if one network name, example1 or example2, is entered.
I'm looking at creating WLANs using standalone APs for the first time. I know this can all be done with trivially a controller, but this project can't stretch to that...Can I use MAC filtering on standalone APs to restrict which clients associate?I think these will be 1240AG devices but I assume the answer is the same for all models?Can I mix MAC filtering with WEP/WPA? And use MAC filtering without encryption?
View 2 Replies View RelatedI have a 1240Ag. Earlier I loaded a startup config from a backup. The AP came back up - I can SSH into it, but when I try to access the web management page it says "IE cannot load the webpage".
View 3 Replies View RelatedIs it possible to configure two SSIDs with same valn (default VLAN) with same IP addressing subnet on an autonomous 1240AG access point ios ver is 12.4 21a ja1.
View 3 Replies View Relatedi need to configure wireless link between my 1300 series, how can i use them like a bridge and access point in the same time?
Do i need static ip for BVI interfacess between them for bridge or its need to be DHCP, is there any example?
I want to upgrade the ios ap-1240AG me to leave it in standalone mode.What default ip should take my ap?How should we be the tftp command to update the IOS on my ap?I am using tftp server of windows xp?
View 1 Replies View Relatedhow is the IP configuration for this Fast Ethernet F0.
This is because usually we only assign IP to the BVI interface. Is it after that, the Fast Ethernet F0 automatically also be assigned the same IP?
As such, when goto the Fast Ethernet F0 by CLI, by using no shut then this will Enable the Fast Ethernet Port?
I am having access point 1240AG and planning to deploy ISE as a exteral radius server. I would like to know how different authorization policy need to configure in AP/ISE. Whether I can use named ACL or VLANs (CoA) as a enforcement types without use of WLC. If yes then how?
View 10 Replies View RelatedI am setting and configure the Cisco AP 1240AG with 5GHz External Antenna extension. The whole product is called iWap. The problem now is that the wireless signal amplitude only can reach 3 bars instaed of ful 5 bars.
Few questions I have for this setup and configuration :
1. What is the default or original frequency of antenna of Cisco AP1240AG? Can a 5GHz antenna work with the AP 1240AG whereby it is run with 802.11a and 802.11g?
2. If 5GHz antenna can work with 802.11a or 802.11g, what is the setting or configuration needed to be done at the Cisco 1240AG? Or, no setting or configuration needed because it will automatically work by default?
hp 1300 printer driver for windows?
View 1 Replies View RelatedI have a Dell Inspiron 1720, that uses a 1300 wireless lan, that keeps crashing. Is there a fix for this, can I replace it with another wireless lan card? Whenever I first start the computer, I would get the error message saying your wireless card had stopped working.
View 4 Replies View RelatedI have two different LAP 1300 and 1200 in my network and I need to add theme to the WLC,I successes to add one of theme by the option 60 in the DHCP pool at the Core SW,How to use multiple VCI strings for lap 1300 and 1200 (option 60) in one pool?
View 4 Replies View RelatedI have two Cisco 1300's acting as bridges only. I have created an infrastructure ssid on VLAN 2 and assigned this to the radio. I am carrying multiple VLANs between the bridges (using subinterfaces on the fastethernet and radio ports).I have enabled WPA-PSK, but how do I check that this is being used between the bridges? Also - I have a switch connected at each end of the bridge. When I make VTP changes, the remote switch does not pick these up - is this because VTP goes over VLAN1 regardless of the Native VLAN (2 in my case)? Do I have to carry VLAN1 over the bridge to get VTP working, or is there an alternative solution?
View 7 Replies View RelatedI have Aironet 1240AG and the 2 laptops connected to same SSID. Unable to can ping each other but can ping/browse server on wired.
Below are my config:
Current configuration : 2646 bytes!version 12.4no service padservice timestamps debug datetime msecservice timestamps log datetime msecservice password-encryption!hostname AP2!enable secret 5 $1$7EVQ$2FN7ewjcrwKCICIfmFgCO.!no
[Code].....
They are 8 APs Cisco 1240AG installed inside our warehouse, on the other hand we had some places with poor signal level -82dbm so we put two router linksys wrt54g.
The Cisco APs have 2.2dbi omnidirec antennas and they are configured with the same SSID on different channels (1,6,11) and max tx, rx (100mw).
When we check the signal level we realized that we have more signal from the linksy than the Cisco?