Cisco Firewall :: AIR-AP1121AG-A-K9 Is Not Getting Connected To WLC?
Mar 6, 2011AIR-AP1121AG-A-K9 is not getting connected to WLC.
View 1 Replies
ADVERTISEMENT
Cisco Firewall :: NAT To IP Address Not Directly Connected To PIX 515
Mar 27, 2012Can an ip address be NAT'ed to an ip address on a PIX 515 which isn't an ip address of a network directly connected to an interface on the PIX?
Specifically, can a host with an ip address of 150.140.102.3/26 which is connected to a network whose PIX firewall interface is 150.140.102.1/26 be NAT'ed to an ip address of 150.90.70.1/24 which is not a ip address of an interface that is directly connected to that same PIX 515?
I've attached a PDF depicting the network topology and describing the above.My first response to this question is that it can't be configured to do this, but need either a confirmation or correction to this.
Two Router Connected On One Switch - Firewall?
Nov 3, 2011Two Router Connected on One Switch and switch on Firewall?
View 2 Replies View RelatedCisco Firewall :: Telnet Timeout While VPN Connected Via ASA 5520?
Jun 2, 2010When users are VPN connected their telnet sessions timeout after an hour of inactivity. Looking at the connections on the firewall they are showing as idle. Is there a configuration change or something else that has to be modified?
View 2 Replies View RelatedCisco Firewall :: 871 - Cannot Ping Or RDP Remote Stations Once Connected
Jun 6, 2011I've setup a CISCO 871 which receives DHCP IP address on WAN interface Fa4 and DHCP-assigned static IP Address on virtual-ppp1. The static address is used for site-to-site VPN's, while I've planned the DHCP address for standard web access and CISCO VPN Client dial-out.
Internally, I've created 2 VLAN's, one for standard PC's with access to the remote sites via site-to-site and cisco client, and the other for a 'secured' area with only HTTP/S allowed out. [code]
Clients in the PCLAN should also be allowed to dial-out using CISCO VPN client to remote sites via the OUTSIDE interface. This is partially working because the client does log into a remote site, however I cannot ping or rdp remote stations once connected."ip inspect log drop-packets" does not reveal dropped packets when trying to ping or rdp. [code]
Connected To Unencrypted Wireless / Firewall Turned Off
Jan 9, 2012I am connected to unencrypted wireless, firewall turned off. My dropbox will sync and if I open IE I can access www.microsoft.com [very slowly] but so far that is all. Chrome wont open anything - just says proxy server problem. If I run diagnose from IE it say my connection is fine. I have AVG free software. I do get a error from totalnetguard when I boot up that says it can't log on. If I use my aircard direct on the computers usb slot and connect that way everything works fine.
View 3 Replies View RelatedCisco Firewall :: Voip Pbx Resides On Separate LAN / Not Connected To ASA 5510
Oct 18, 2011The Voip pbx resides on a seperate lan, not connected to the ASA. Users from behind the ASA (inside) try to connect to the VOIP pbx using a soft phone. The Voip connection is established, however users cannot here conversations on either end.Im assuming this is possibly a Sip and Pat issue? The ASA firewall is using a seperate Global IP for PAT. Also I have opened ports on the outside interface for SIP udp 8081, 2088,16000-16010 and 15000-15511. I have both SIP and H323 h225 inspection in place as well.
View 5 Replies View RelatedCisco Firewall :: ASA 5510 Cannot Talk To Remote Networks Connected
Mar 20, 2012We have an inside interface, 192.168.10.0/23We have an outside interface, public ip...We have the ASA connected to 5 site to sites, this is working fine and through the internal interface can access all remote sites and vice vera. These are 192.168.20.0/24, 192.168.30.0/24, 192.168.40.0/24, 192.168.50.0/24 and 192.168.60.0/24,When a user connects via Cisco VPN Client they can see the inside network but can't talk to the remote networks connected, for instance 192.168.40.0/24... whereas an internal user can. I understand that the VPN client connection is seen as an outside connection, not an inside connection... but then I read [URL] and I am confused even more.
View 8 Replies View RelatedCisco Firewall :: 5510 EtherChannel Connected To 3740 Stack
Feb 13, 2013I have a single 5510 ASA and a paired of 3750 Stacked Switches. I was trying to create an Ether channel on the ASA and connected to the SW Stack port channel to support different VLANs sub interfaced at the ASA. am confused with the following statement from doc. [URL].
Section Guidelines and Limitations :
"The ASA does not support connecting an Ether Channel to a switch stack. If the ASA Ether Channel is connected cross stack, and if the Master switch is powered down, then the Ether Channel connected to the remaining switch will not come up.
What "If the ASA Ether Channel is connected cross stack"? or better. Is it possible to use the ASA 8.4 Port-Channel to connect it to the 3750 ether channel stack?
Cisco VPN :: ASA 5505 Setup As Firewall Connected To Cox Cable Modem And Wireless AP
Aug 27, 2011I have two ASA 5505's. One is currently setup as my firewall connected to the Cox Cable modem and wireless AP. I have another ASA that I would like to use, I have an idea that I could set that one up as a VPN unit, but not sure how I could do that. If that is not an option, can you provide the command line instructions on how to setup the VPN via the console cable. [code]
View 1 Replies View RelatedCisco Firewall :: ASA 5510 Connected To MPLS And LAN Via 6506-E Core Switch
Apr 19, 2011I am attempting to install an asa 5510 at my hq. Our MPLS network is provided by our ISP and the routers are managed by them. They will be working with me to add the needed routes to the routers. Using version 8.4.1 That said, here is my challenge:
I am connecting the MPLS routers and WAAS device to my core switch(also performing inter-vlan routing) in VLAN 2. There are 3 connections needed for the mpls equipment and they are all in vlan 2 on my core switch. The firewall (ASA 5510 with security plus licensing) also has an interface (outside) in vlan 2.
e0/0
shutdown
no nameif
[Code]....
configuration guides or suggest TAC as they have been a bit inconsistent with this issue thus far. What am I missing because I cannot get to where inside interface of the firewall is pingable by the lan and the outside interface of the firewall is pingable by the lan.
Cisco Firewall :: ASA 5510 Users Are Unable To Pass Traffic When Connected Through Vpn
Sep 12, 2011I am migrating over from and old PIX to an ASA 5510. After configuring the new device everything else is functional (Internet) but users are unable to pass traffic when connected through the vpn, they are able to authenticate and I see their session connected on the ASDM but no data is passed..[code]
View 4 Replies View RelatedCisco Firewall :: Zbot Infection - Using ASA 5510 To Detect Computer Connected To IP
Sep 27, 2011Is there any way to use an asa 5510 to detect which computer on the inside of my network is connecting to ip 87.255.51.229. I am being blacklisted for w win32/Zbot connection, I need to identify this computer and get it disconnected from the network ASAP.
View 6 Replies View RelatedCisco Firewall :: ASA 5512-X / VPN Client Is Connected But Unable To Ping Internal Network
Mar 17, 2013I have created a VPN connection for ASA 5512-X by using the wizards and nothing seems to be wrong on the wizards's config.I am able to connect to the network by using the VPN but unable to ping internal network.Below is my config for your reference:
Result of the command: "sh run"
: Saved
:
ASA Version 8.6(1)2
!
hostname FAA-ASA-1
enable password crzcsirI44h2BHoz encrypted
passwd 2KFQnbNIdI.2KYOU encrypted
[code].....
Cisco Switching/Routing :: 6500 Configure Switch Layer 3 Port Connected To Firewall
Feb 26, 2012I have a switch layer 6500 series connected to a firewall, the port configuration between them is layer 2, in another words I do not configure an IP address in the Cisco switch port to conected it in the firewall, but when a apply a policy on firewall it lose communication with others vlans, just the vlan that is connected between the switch and firewall works, attachment the design. I think that is necessary to configure the connection between the firewall and switch as layer 3 ( a port with IP address in the switch), but I would like to know why? The switch is configured with about 10 vlan and it is a inter vlan routing, a default route is configured in the switch where the gateway is the firewall.
View 5 Replies View RelatedLinksys Wired Router :: RV016 - Allow Other Networks Connected To Firewall To Access Internet?
Nov 24, 2011I have a sonicwall firewall connected to the LAN port of the RV016 router and two DSL modems connected to the WAN ports.
Ip address allocation:
Firewall
192.168.50.9
RV016
LAN - 192.168.50.10
WAN - 192.168.60.1
WAN - 192.168.61.1
What configurations do I need to enter into the RV016 to allow other networks connected to the firewall(192.168.3.0, 192.168.2.0) to access the internet?
Get Virtual Adapters One Face Connected To Laptop Another Connected To A Physical
May 10, 2012I need to have some (maybe four) virtual network interfaces, one face of them connected to my laptop and another face bridged to one of my physical network interfaces.How can i do that?Ive tried VirtNet and Microsoft Loopback Adapter but no success.
View 1 Replies View RelatedCisco VPN :: Can't See LAN When Connected Via Pix 501
Sep 16, 2012I used the VPN wizard and can connect, but I cannot see any servers. I clicked incorrectly in another post marking it as "Correct Answer", so know I have to post again as his answer pertains to Windows 98.
Pix 501 ver 6.3.5
PDM 3
Cannot Get Connected To 192.168.0.1
Jul 14, 2012I can not connect to the wireless
View 1 Replies View RelatedFTP Between ICS Connected PCs?
Dec 21, 2011I'm currently running the internet through my main PC to other devices in the household by using ICS.
One thing I've noticed is that I can't simply fill in the IP address of the PC hooked up through the router I'm running the ICS through, and connect via FTP (Filezilla). In order to FTP between two local devices, I have to disable the ICS, switch the ICS hosting PC's ethernet plug from the "Internet" port to the "LAN" port, and maybe reboot the router. after doing all of this, I can then FTP connect to another PC for instance.
Is it possible to have an ICS setup between two PCs, and still have the ability to FTP between them as well?
Cisco :: Interface Status Connected But No MAC?
Feb 18, 2011On my Switch (3750), i have a host connected. Checked the interface status and it shows as "connected". However, when i tried checking the MAC connected to that interface, its not showingI have my Switch (3750) connected to a Router (3845). On the Switch, i have a printer connected in an interface. I am seeing the Printer's MAC associated with the switch port. However, when i checked the ARP table; no entry seen for the Printer's MAC. What are the possible reasons for this? We have several same kind of devices connected to network and they are fine.
View 5 Replies View RelatedCisco :: ASA Unreachable Along With Hosts Connected
Jun 17, 2011So we have a cisco asa 5505. Once a day now (random times) it will suddenly be unreachable along with the hosts connected. If I console in and ping a host from the asa, suddenly it becomes reachable from the outside world again. My job prohibits me from posting the configuration online.
View 10 Replies View RelatedCisco RE1000 - Two Extenders Cannot Be Connected To Each Other
Jan 18, 2012I have a Wireless router & two network extender from Cisco RE1000.I need to connect them to reach a distance over 150 feet. can I connect an extender to another & to the router?I tried this setup but I keep loosing the connection. it might be the router it self or the tow wireless extenders unable to communicate probably.I need some advise if the two extenders cannot be connected to each other, what are the possibilities.
View 2 Replies View RelatedCisco :: Cannot Ping APs Connected To WLC 2106
Jul 11, 2012I have a problem with pinging APs that are connected to WLC 2106. We have a TRUNK with VLAN50, VLAN51 and VLAN71 (all tagged) connected to our WLC 2106. VLAN50 is our management network. We have configured bot management and AP-management interfaces on WLC with IP addresses from our management network and we have set both to VLAN 50. We have also configured static IP addresses on every AP, connected to WLC.
The problem is we cannot ping APs. This means that APs can’t connect to any other device on the management network and we would like to use RADIUS for WiFi client authentication.
How can we solve this problem? I guess if we configure VLAN50 as native untagged VLAN in our TRUN, this would work? Is there any way to configure this without using native VLAN?
We also have problem with IPv6 connectivity. We have configured DHCP and we are using 1.1.1.1 DHCP proxy and it works great for IPv4, but how can we configure DHCP proxy for IPv6 addresses? Our WiFi clients need to get also IPv6 addresses. I have enabled “IPv6 enabled” option on the WLC.
Cisco :: LMS 4.2 - Devices Not Connected To Topology
Nov 26, 20121)i have problem in LMS 4.2 , he shows most devices not connected to topology sitting lonly even though the have cdp enable , how to force these to join the topology
2)why some devices are shown unreachable , even though i can ping them from lms server and gets reply, also they have community and cdp configured
Cisco VPN :: ASA 5505 - Cannot Access To Web After Connected
Feb 16, 2013I configured a Cisco ASA 5505 firewall with VPN. However, I can not access to the web after I connected to the remote IPSec VPN. I also failed to connect to the webs using IP. But I can connect to internal servers in the office without any problems.
ASA Version 8.2(5)
!
hostname asa
[Code].....
Cisco WAN :: C6500 Routing One IP Away From Connected Sub-net
Jan 24, 2013I have lets say a /24 directly connected via a vlan on a C6500 in the network.I'm trying to migrate some servers/devices away from it , however I need to move parts of it away bit by bit ( For example a /32 or a /30 that make up the /24 )Ive tried a direct ip route x.x.x.x 255.255.255.255 y.y.y.y and even a ip route x.x.x.x 255.255.255.255 y.y.y.y 1
Yet it still prefers the directly connected range ( as I pretty much expected. )
Is there any way I get it to prefer a static route over a directly connected?
Cisco Wireless :: 4404 And Connected AP Name
Apr 17, 2011We have 2 4404 controllers running 6.0.x code. I have several SSID setup with different VLANS. When the clients associate they do not show the name of the AP they are connected to, is there any way to display the assocated AP name?
View 2 Replies View RelatedIn LAN 1 Pc Not Connected Other 6 Working?
Feb 20, 2011We create a LAN with D Link switch(8 port).6 pc working properly and 1 pc even not connected to LAN we check wire,the signal are transmitted properly through wire.Crimping is done properly.
View 1 Replies View RelatedOnly Two Macs Are Connected Not All 4
Jan 15, 2011I moved into the new house with two laptops with Windows Vista installed. Since then I have been experiencing severe problems with the wireless connection. The operator is TalkTalk.
As soon as we realised that the problem seemed to exist exclusively on our Vistas (since the two Macs, of another couple of tenants who had been living here for long, were working correctly as usual) we called the company. They suggested many things I have already read on this forum such as deleting the other networks, re-adding mine manually etc. We then realised that things were more complicated than initially thought and started analysing the problem more in depth. We went through their website and changed different settings, including those listed in the properties of "Manage wireless connection" or sth like that (we changed some IP configurations, the protocol ivp4/6, etc.). The outcome was that my Vistas started working while the Macs stopped.
I called them again many other times but no conclusive solution was ever found. I eventually talked to another operator who drew the conclusion according to which the WEP configuration of our Vistas is not compatible with that of the MAC. In other words either the Vistas would work or the Macs. No way they could both work at the same time!!!!
VM Connected To VPN Changed IP And Now RDC Isn't Possible
Feb 11, 2013I ran into a bit of an issue today while testing a vpn software on a virtual machine(win7); I successfully connected to vpn, then the connection dropped and since with the vpn connection another ip address was assigned, now I'm unable to communicate with that VM.
I am able to find it in SCCM via hostname, but can't reboot it or start anything on it.
Connected But Can't Always Load Web
Aug 6, 2011I've had this problem with my parents internet for some time now, but it's getting gradually worse. It goes through stages of being connected to the internet but won't load web pages. The error messages are;
On Firefox: "The connection to the server was reset while the page was loading"
On Chrome: "The connection to www.example.co.uk was interrupted"
But my computer still says it is connected, and indeed some downloading still works even though web pages won't load (i was able to download the 'Settlers 7' demo from bittorrent and the full game from steam uninterrupted)
ISP is Post Office Connection is DSL Up to 3 computers share this connection, 2 connected by wireless and 1 by LAN. I used to believe this problem affected all 3 computers simultaneously, but now I�m not sure
==============================================================================
C:UsersHal>ipconfig /all
Windows IP Configuration
Host Name . . . . . . . . . . . . : Hal-PC
Primary Dns Suffix . . . . . . . :
[Code].....
No Internet On Pc But It Says Connected?
Dec 28, 2011About a week ago I went on my computer and opened up Mozilla Firefox and it tried loading for a couple of seconds then it went to a white screen. I opened up internet explorer and it says can't find page. I have the pc hardwired with an Ethernet cable to my router. The computer says it is connected and has strong strength. Every other device connected to that router has internet and connects just fine. My antivirus popped up and said it detected a threat then I ran a virus scan and it found nothing
View 4 Replies View Related
