What should i do on my Cisco ASA 5505 firewall to grant access to my network systems to access internet via gateway. I use ASDM to configure the firewall.
View 5 Repliesin office we have a broadband internet to 6 systems one router .I want to control the partcular system internet
View 1 Replies View Relatedi want to connect two systems at my home to share internet and data through wireless connection
View 2 Replies View RelatedCisco ASA 5505
Cisco Adaptive Security Appliance Software Version 7.2(4)
Device Manager Version 5.2(4)
I have and vpn tunnel between a pix network (192.168.200.0/24) and an asa network (192.168.100.0/24); it's been running fine for awhile now but this morning i've come in an i can not access anything on the pix network, (mail, file & web servers). Each attempt to access results in a SYN timeout.
6 Nov 30 2012 14:24:01 302014 192.168.200.9 192.168.100.115 Teardown TCP connection 6014 for outside:192.168.200.9/135 to inside:192.168.100.115/51240 duration 0:00:30 bytes 0 SYN Timeout
I have config ASA 5505 and it is conencted to layer 3 switch that connects to cable Modem.
ASA is config with DHCP option and PC is able to get the IP from ASA. But from PC i am unable to access the internet. From ASA itself i am able to ping the Websites fine.
ASA has config with DHCP for inside and also it is doing NAT.
When i connect the ASA directly to Cable modem then pc is able to access the internet.
I would like to restrict Internet traffic (HTTP & HTTPS) for Inside Users with an ASA 5505. I would like to setup a proxy-like system where a User/Password must be entered before the User can actually browse the web.
I know that this can be done with an additional RADIUS/TACACS+ Server. Is this also possible without any external AAA Server, so with User/PW stored on the ASA locally only?
I have configured the ASA 5505 for internet access and outside users to use two servers in the DMZ. Every thing is working fine. When I was configure VPN, I did some mistake I guess, now inside users are not able to access internet. They get an error 405. Thats an error. The request method XXX is inappropriate for the URL /. Thats all we know. Even I am not able to access the server in the DMZ from outside and I get an error : Bad Request - Invalid HeaderThese things just happend after I did some thing on the ASA. I copy and pasted the my old configuration but still insider users are not able to connect to internet and from outside I am not ableto connect to server. The weired thing is that I can user VPN with out any issues. I can connect to vpn but I cant access any internal resources. Even inside users are able to ping internet addresses with out any issue.
View 2 Replies View Relatedi am looking for the best practices when using a Cisco ASA 5505 to provide NAT and protect my inside network from the outside.
I have the inside security level set to 100 and the outside set to 0, want other features can be used to protect the network from the Internet, am assuming that the security levels will ensure no traffic comes from the outside to the inside unless there is a rule that allows it.
Would any firewall policies be required to increase the level of security?
I have a wireless Airport Extreme on Vlan3. My problem is that I can't get internet access from a wireless client which connects to the Airport which is on the DMZ. From my laptop which is connected to the Airport, I can ping the 5505. That's as far as I get.
asa5505(config)# sh running-config
: Saved
:
ASA Version 8.4(2)
!
hostname asa5505
enable password ArKd0aXL.wihdyE3 encrypted
passwd ArKd0aXL.wihdyE3 encrypted
names
[code]....
ASA 5505 and DMZ and Base License,"For example, you have one VLAN assigned to the outside for Internet access, one VLAN assigned to an inside business network, and a third VLAN assigned to your home network. The home network does not need to access the business network, so you can use the no forward interface command on the home VLAN; the business network can access the home network, but the home network cannot access the business network." Page 6-17.
This is exactly what I need. Mail server in DMZ, full access from internet to DMZ, and from inside network to DMZ, no access from DZM to inside network. If I good understand, this is possible with base license.
I successfully configure, internet Access for DZM and inside network, Mail server can be accessed from internet, as well as RDP on inside network. But I have problem to configure communication from inside network to DMZ. [code]
When I start a VPN-session my server looses internet access. The server is host for a few virtual machines and they have internet access.using 5505 and asa is version 8.4(2). [code]
View 6 Replies View RelatedI have a 5505 between a vendor router & my company network, vendor is not able to access devices on internal network. I am also not able to access the firewall via asdm
View 10 Replies View RelatedI am having a problem configuring my ASA 5505 for NAT.
View 3 Replies View RelatedI am using two firewalls to connect two different offices. Firewall 5510 is running ASDM 6.3 and 5505 is running ASDM 6.2, Problem is that even after connecting two sites, i am unable to ping remote network from either side. I am mentioned static route as tunneled.
View 1 Replies View RelatedI have configured an ASA 5505 to connect a single internal network to internet, it is not working. I have attached the config
View 9 Replies View RelatedDoes Cisco ASA 5540 Support VPN Access on MAC Systems ??? Is Anyconnect available for MAC ?I am also having trouble running Clientless VPN on MAC , not able to start smart tunnels?
View 1 Replies View RelatedDeploying monitoring systems, typically in NOCs and maintaining them and creating modles of customer networks working with SNMP polling systems. Tools include applications like HP NNM, Netcool, Ciscoworks etc. How far would a career take you if specialising in this area? It seems like a diversion from the typical Routing/Switching side of networking. Not nessacarly from a technical perspective, how about networking? Ie; being exposed to migration/project teams who wanting to 'migrate' more hardware and sites to the care of the NOC, after the design teams have implemented them? This seems like a step towards the design side which in the long term I am wishing to get to.
View 1 Replies View RelatedI brought one WAP4410N Wireless-N Access Point and successfully configured with out fail as suggested on getting started and I am able to access internet but unfortunately I am unable to access our local servers and services which in LAN (mail-postfix, chat-spark) like.
View 1 Replies View RelatedWhen UDP is more preferable over TCP in distributed systems? Why?
View 1 Replies View Relatedi wanna to know the ip address of the systems in my wifi network in win 7.
View 1 Replies View RelatedI use campground WIFI systems to get internet/email but some wifi systems have limited range.I solved this problem with a booster antenna but that means I am hard wired to it. I want to (if possible) to get the wifi signal to a bridge then send it to a router so that I can use my lap top, printer and other devices in my 5th wheel wirelessly. I looked at a suggested system that uses a point-to-point antenna that feeds a bridge, that feeds a router. I don't want to use the point-to-point antenna.My booster antenna is a USB feed.
View 1 Replies View RelatedToday I got a new modem, which gave me internet on the computer. I still can't get online on my PS3 or IPOD. How to create a new wireless connection. Also the World icon on the router is red but everything else is green.
View 5 Replies View RelatedI am working on pix 525, when connected through console I can access the whole internet but when i connect the pc to the inside interface i have no access to the internet. the pc can ping the pix inside interface and from pix i can ping the pc. My configuration is shown below.
PIX Version 7.2(2)
!
hostname pix
domain-name xyz.edu.pk
enable password xxxxxxxx encrypted
[code]....
I have two Windows 7 Ultimate computers and around 10 Windows XP (Home and Professional, SP2 and SP3) computers trying to connect to it. It's just a LAN (no internet access).I have set all of the password-protected sharing off on the Win 7 systems. I have tried opening up ALL of the permissions and such (since security is not really an issue).When I try to map the network drive, it won't let me merely connect to it. So, I have to click map network drive on the XP computer and hit "login with other credentials" and enter the username/pass for the user account on the Win 7 machine (we'll say Bob for user and Smith for password for the sake of example). It will mount the share (which is actually the C: root of the drive) just fine.
The only problem is the moment you restart the Windows XP system, it will lose the connection. My fix for it was to create a .bat file that contained the following: [code] I put it in the Progam FilesStartup folder to run upon boot. For the most part, it seems to work after a fashion. Some of the computers, though, will drop the connection to the two Windows 7 systems and need to be rebooted 1-2 times before they get it back again. Even clicking the .bat file manually will have the same result (you will have to reboot) if it drops the connection while you're using it. Plus, sometimes it doesn't map the drive correctly (I assume because the batch file is running before the connection has a chance to initialize on the LAN).I've also tried adding an "Everybody" user to the permissions on the Win 7 systems with full access, but it only seemed to cause problems with the existing connections.It might also be prudent to mention that both the Windows 7 and Windows XP systems are all 32 bit. I've also disabled the firewalls on the two Windows 7 systems. Neither of them have any antivirus or security software installed.
After connecting via anyconnect client 2.5, I cannot access my internal network or internet. My Host is getting ip address of 10.2.2.1/24 & gw:10.2.2.2
Following is the config
ASA Version 8.2(5)
!
names
name 172.16.1.200 EOCVLAN198 description EOC VLAN 198
dns-guard
!
interface Ethernet0/0
description to EOCATT7200-G0/2
switchport access vlan 2
[code]....
Trying to connect two systems together but was giving error that contact network administrator,one system is laptop with wireless and other is desktop but connect through cable but running windows XPSamson
View 1 Replies View RelatedI have a 5540, and i am trying to allow access to internet for an specific network object group, who has inside a bunch of users, who needs direct internet access without any restrictions, i have tried with dynamic NAT, but that configuration ask for a specific IP o a Network range, and is not permitted to configure an object group as a source
The group is located in LAN zone, so a permission from one zone to another zone is needed i think, but i can allow the internet acess to that group Is there another way to get that , different from NAT ?
I have created remote access vpn in my ASA 5505. The tunnel is established but i am not able to access the internal network.
View 3 Replies View RelatedI'd like to see some REAL LIFE comparisons of ASA firewall throughput (a bit like this one for ISR G2 Routers - [URL].
The reason I ask is that I recently upgraded a firewall from an ASA5505 to an ASA5520 on a small network where the only outside connectivity was a single 10meg Internet circuit with an IPSEC VPN (not landed on the firewall but on a router) to another site.
When I swapped out the firewall the users noticed a big improvement. The firewall is not doing anything out of the ordinary - no IPS or VPN, just standard state full inspection.
setting up an ASA 5505 to be used as a firewall between a BT internet router(BTNet service) and a Cisco 3560 Lan switch. BT have presented me with a cisco 3800 series router with the following details:
Network Address Network Mask BTnet NTE Router LAN Address
There are 2 Gigethernet ports on the back of the router port Ge0/0 is connected to the BT NTE and the status light is flashing green. Int ge0/1 is connected into port int e0/1 of the ASA but i am unable to get any connection.
Have Win7 and XP systems in my network wire connected to the router. When IP of both systems are not reserved, each computer can see other network computers and devices, five in total.A good thing that both systems get each time same IPs which even got not changed since I upgraded from E1200.When I reserve an IP for each system exactly that they currently have, both systems loose ability to see other network computers. Network shares not affected, I still can remotely access my XP box remotely from my 7 via RDP by computer name. WDTV Live wirelessly connected to the router can get/update its IP address (no connection issues) but same as others cannot see network resources.
Tried different ways, rebooted, finally ended up with device reset pushing the button.The next day I managed to reproduce the issue, but was able to revert by disabling/enabling of DHCP server.Another issue I got with an external HD connected to the router when some files got converted to folders by uTorrent started from that drive.I had to use Unlocker application to be able to delete folders converted. I can just assume that issue because of anonymous access was enabled to the external disk. No problems when same HD connected to PC USB.
I can't access our ASA 5505 via SSH from the outside. I've configured this through the ASDM to allow SSH (Device Management > Management Access > ASDM/HTTPS/Telnet/SSH). I added a rule that allows SSH on the outside interface from 0.0.0.0 0.0.0.0. When I try to ssh in with putty, it says "server unexpectedly closed network connection" When I watch the logs on the ASA, it shows a Built inbound TCP connection on port 22, but then immediately a Teardown TCP connection. It doesn't show it's being blocked by any rule. Is there something I'm missing on enabling SSH?
View 13 Replies View RelatedI am not able to get to the internet from my DMZ ip address.
Here is my config.
interface Ethernet0/0
switchport access vlan 2
!
interface Ethernet0/1
!
interface Ethernet0/2(code)