Campground Wifi Systems To Get Internet / Email

Sep 20, 2011

I use campground WIFI systems to get internet/email but some wifi systems have limited range.I solved this problem with a booster antenna but that means I am hard wired to it. I want to (if possible) to get the wifi signal to a bridge then send it to a router so that I can use my lap top, printer and other devices in my 5th wheel wirelessly. I looked at a suggested system that uses a point-to-point antenna that feeds a bridge, that feeds a router. I don't want to use the point-to-point antenna.My booster antenna is a USB feed.

View 1 Replies


ADVERTISEMENT

Wireless :: Ip Address Of The Systems In Wifi Network

Mar 27, 2011

i wanna to know the ip address of the systems in my wifi network in win 7.

View 1 Replies View Related

How To Control Internet Access On A Router To Particular Systems

Mar 2, 2012

in office we have a broadband internet to 6 systems one router .I want to control the partcular system internet

View 1 Replies View Related

D-Link DIR-615 :: Can't Connect Game Systems To Internet

Apr 17, 2012

Today I got a new modem, which gave me internet on the computer. I still can't get online on my PS3 or IPOD. How to create a new wireless connection.  Also the World icon on the router is red but everything else is green.

View 5 Replies View Related

Home Network :: Connect Two Systems To Share Internet?

Jul 25, 2011

i want to connect two systems at my home to share internet and data through wireless connection

View 2 Replies View Related

Cisco Firewall :: ASA 5505 / Network Systems Cannot Access Internet

Nov 14, 2011

What should i do on my Cisco ASA 5505 firewall to grant access to my network systems to access internet via gateway. I use ASDM to configure the firewall.

View 5 Replies View Related

Cannot Send Outlook Email Using Wifi Outside Home

Oct 12, 2011

I use MS Outlook (Office 2007) to manage my e-mails. This works fine on my own wi-fi at home. However, when I am in Portugal and I connect to wi-fi in a coffee shop for example, and I load up Outlook, then I receive my e-mails fine, but I cannot send an e-mail.

View 5 Replies View Related

Cisco Firewall :: FWSM 4.0 Email Server Cannot Connect To Email Gateway

Aug 8, 2012

I have a question about NAT behavior on FWSM 4.0. The problem is email server (Company A) cannot connect to email gateway (Company B) on the outside network and it randomly happen. I got this error from server guy "Detail: xlate has blocked the connection between A’s mail gateway and B’s mail gateway". It work fine again after clear xlate on firewall. [code]
 
1. How FWSM create xlate table like that? I mean it look like NAT0 for 158.137.21.26 but it doesn't has any nat rule for 158.137.21.26 on firewall.
 
2. What does it mean "connections 24" at the first of line? In the normal time, I only see the connections is 0 like the second line of xlate
 
3. After clear xlate global 158.137.21.26, the first line of xlate table is gone then email server can connect each other. Does is a bug on FWSM? or This is a normal NAT behavior of FWSM.

View 1 Replies View Related

Wireless :: Deleted Item Email Troy From Incoming Email?

Mar 21, 2011

I deleted an incoming email titled troy from my email inbox by mistake I need to recover this email as it came from my son in bali [URL] edited by moderator: Deleted Email address to prevent Spam

View 1 Replies View Related

Can Receive Email But Cannot Connect To The Internet?

Apr 26, 2011

Can receive email but cannot connect to the Internet, my user can get to all shared files on the network and get emails through exchange but cannot browse the internetWe turned off the firewall and checked DNS and the IP. It says the local area connection is connected. We added IE to the exceptions tab in firewall.

View 1 Replies View Related

Users Are Getting Dropped From The Internet And Email?

Apr 7, 2011

They are all on the same domain but some of these users are getting dropped from the Internet, and email. Once they restart there PC it works for a couple of hours than it drops again. We also tried updating the network driver after doing that it works ok for a couple of hours after that they start lossing connection to the Internet and email again. We have tried several different things but have not being succesful in finding the issue.

View 3 Replies View Related

Internet Shows Its Connected But Browsers And Email Do Not Work

Jul 18, 2012

my neighbor is having a problem with her computer, its an HP touch smart [not sure of model] every other computer in her household works [1x wired 1x wireless].

the computer in question has had repeated problems and various hardware issues and has been sent out for repair on more than one occasion all for non software related issues, i take care of software issues and diagnose hardware problems and i have done so without a hitch until now.

when the problem first started happening i would do a system restore to a point were it was working, but that does not seem to be working anymore

i have tried disabling firewalls [she uses AVG internet security edition which is on all of her computers], windows firewall, disabling and re-enabling network drivers, updating drivers, installing different and previous versions of browsers

View 4 Replies View Related

WAN Miniport (IP) - My Lan Systems Are Not Accessible?

Feb 22, 2011

i found WAN Miniport (IP) - in my windows xp and at the same time my Lan systems are not accessible.

View 1 Replies View Related

Network Management Systems

Apr 7, 2011

Deploying monitoring systems, typically in NOCs and maintaining them and creating modles of customer networks working with SNMP polling systems. Tools include applications like HP NNM, Netcool, Ciscoworks etc. How far would a career take you if specialising in this area? It seems like a diversion from the typical Routing/Switching side of networking. Not nessacarly from a technical perspective, how about networking? Ie; being exposed to migration/project teams who wanting to 'migrate' more hardware and sites to the care of the NOC, after the design teams have implemented them? This seems like a step towards the design side which in the long term I am wishing to get to.

View 1 Replies View Related

How To Monitor Bandwidth (40 - 50 Systems)

May 25, 2011

I show up at this business. They have about 40-50 systems. They have a 2003 AD server with a router, and 4 switches. There is also a dvr system on the network for cameras.Each switch is daisy chained together. Everything is working correctly except for the fact that the network drops about 5 times a day. Before they called us, they would just unhook one switch and plug it back in and it would work.At first, we took that switch and exchanged it with another switch in a computer lab to see if just the computer lab goes down. If it did, then that switch was bad. That wasn't the case, the whole network still went down.We had already left, but when we go back, our first choice will to see if there is a loop anywhere within the switch that will flood the network. Then, we were going to see if there was a switch that was getting a lot of traffic on the network to try to track it down.

View 4 Replies View Related

Connect 2 Systems On Lan With Different Workgroup

Jul 17, 2011

I have a few laptops at home and one desktop. I also have a work laptop which I carry to work every day. I have a lan at home. The computers are connected through a wireless router though my pc is connected through a lan cable. We are able to share files and content.

I sometimes connect my office laptop at home. Though the laptop connects to the network but I am unable to transfer or share files to other computers running Windows Vista/7. After a bit of research I figured this is because the workgroup name of my office laptop is different than the systems at home. I dont want to change the workgroup name of my office laptop as it will create problems at work.

How can I connected my office laptop to the network and transfer files if the workgroup name is different? It does show names of computers on network but when I try to connect a username & password box pops up.

View 6 Replies View Related

How To Get Isp Login Details Of Other Systems

Dec 15, 2011

How do I find out my ISP and ISP password?

View 1 Replies View Related

Broadband :: How To Share Evo Between Two Systems

Aug 8, 2012

How to share evo between two systems.

View 1 Replies View Related

Cisco Wireless :: 5508 - Allowing User To Access Internet After Entering Email Address

May 25, 2013

I have 5508 controller in my lab. I am working on a project to set up a public internet but with some condition.
 
- User should able to connect to the SSID without any authentication.

- Once user will connec to the SSID it should redirect to an external URL which indicates terms and condition and email address field.

- User should enter his/her email address in email addrss filed and click I accept button.

- Once that is done then he/she is allowed to access internet.
 
We are not sure how can we achive this as I do not know what should be the return value for WLC to allow that user to go through or what should be the settings on the WLC to redirect to the page.
 
I have seen a settings on web authentication for external URL but I guess it is only for username passwor or Radius authentication. While in this case I do not want to use any authentication just an accept buttor or Decline button and all good to go.

View 2 Replies View Related

Best CAT Cable For Security Camera Systems?

Nov 26, 2011

what is the best cat cable to use in security camera systems

View 1 Replies View Related

Home Network :: When UDP Is More Preferable Over TCP In Distributed Systems

Feb 29, 2012

When UDP is more preferable over TCP in distributed systems? Why?

View 1 Replies View Related

Download Speed Varies On Two Systems At Same Time

Feb 19, 2012

I am using my normal Ethernet cable that I used on my old PC at the exact same location / circumstances, but when I plug the cable in my new PC, my download speed peaks at 81.5 kb/s and my upload speed peaks at 10 kb/s. Now when I put it back in my old pc I get 3mb/s download speed and 0.5 mb/s upload speed. I don't quite understand what the problem is. Do I need to update drivers/BIOS? I can't find any updates. This is a clean install of Windows 7 Ultimate 64 Bit with barely any programs installed as of yet. I have reinstalled Windows 7 aswell, to no avail.

View 14 Replies View Related

Peachtree App - Systems Not Showing Up In Workgroup Environment?

Nov 4, 2011

I have a peachtree application installed on a standalone system and needs three other systems to connect to the shared folder to work but each time I click on show workgroup computers, it shows me a blank page on one and only shows the other system on the other.Hence when i try to connect to the peachtree folder, it give error that the system is not accessible?

View 1 Replies View Related

Connecting Two Laptops Via Router With Different Operating Systems?

Jan 3, 2012

I'm adding a router to my existing Win XP Home laptop in order to communicate with a new Dell Inspiron Win 7 laptop and want to be able to access the internet from both. My Netgear Router is setup and working and both laptops recognize the net. How do I get the Win 7 unit to access the net and e-mail?

I use Windstream as my ISP but I use AOL for e-mail. Am I trying to do something that cannot be done?

View 1 Replies View Related

Error 56 - The Cisco Systems Inc VPN Service Has Not Been Started

Feb 20, 2013

I have an issue where I am trying to start my VPN and continually get the following message: Error 56: The Cisco Systems, Inc. VPN Service has not been started. Please start this service and try again.

So I have been into Services to 'start' Cisco Systems, Inc. VPN Services - this then always comes up with this error: Error 1053: The service did not respond to the start or control request in a timely fashion

The solution mentioned on other posts on disabling the ICS but it was already disabled. When I try to start VPNGUI I also get error 56 and when I try to use services.msc to start the service I get error 1053. Then also when I try to start from task manager services(cvpnnd) i get access denied.

View 1 Replies View Related

Cisco VPN :: Does ASA 5540 Support VPN Access On MAC Systems

May 22, 2013

Does Cisco ASA 5540 Support VPN Access on MAC Systems ??? Is Anyconnect available for MAC ?I am also having trouble running Clientless VPN on MAC , not able to start smart tunnels?

View 1 Replies View Related

Cisco :: What Operating Systems Windows Or Linux Can Install WCS-PLUS-UPG-100

Jul 1, 2012

I need to know in what operating systems Windows or Linux I can install the WCS WCS-PLUS-UPG-100. [code]

View 8 Replies View Related

Windows 7 Dropping Connections From XP Systems With Mapped Network Drives

Feb 15, 2012

I have two Windows 7 Ultimate computers and around 10 Windows XP (Home and Professional, SP2 and SP3) computers trying to connect to it. It's just a LAN (no internet access).I have set all of the password-protected sharing off on the Win 7 systems. I have tried opening up ALL of the permissions and such (since security is not really an issue).When I try to map the network drive, it won't let me merely connect to it. So, I have to click map network drive on the XP computer and hit "login with other credentials" and enter the username/pass for the user account on the Win 7 machine (we'll say Bob for user and Smith for password for the sake of example). It will mount the share (which is actually the C: root of the drive) just fine.

The only problem is the moment you restart the Windows XP system, it will lose the connection. My fix for it was to create a .bat file that contained the following: [code] I put it in the Progam FilesStartup folder to run upon boot. For the most part, it seems to work after a fashion. Some of the computers, though, will drop the connection to the two Windows 7 systems and need to be rebooted 1-2 times before they get it back again. Even clicking the .bat file manually will have the same result (you will have to reboot) if it drops the connection while you're using it. Plus, sometimes it doesn't map the drive correctly (I assume because the batch file is running before the connection has a chance to initialize on the LAN).I've also tried adding an "Everybody" user to the permissions on the Win 7 systems with full access, but it only seemed to cause problems with the existing connections.It might also be prudent to mention that both the Windows 7 and Windows XP systems are all 32 bit. I've also disabled the firewalls on the two Windows 7 systems. Neither of them have any antivirus or security software installed.

View 2 Replies View Related

Cisco Switching/Routing :: 3750X / QoS Preservation Of Markings Between Two End Systems?

Apr 25, 2012

I have a requirement to preserve markings end to end across a network utilising 3750X switches, I am marking the packets without a problem, but due to the rewriting function the marking is being overwritten by ther COS-->DSCP maps.To simplify the scenario I have set up a test environment (see Diagram) and am using ICMP as a simple test using ICMP to test with Both 3750 have 12.2(35)SE5 3750-1
 
mls qos
mls qos rewrite ip dscp
 ip access-list extended ICMP
permit icmp any any
 Class-map ICMP
match access-group name ICMP

[code]....
 
I have used wireshark to verify that the packets are being marked, with the' mls qos rewrite ip dscp' they are, without rewriting does not occur.Moving my sniffer to the 3750-2 I am monitoring the Layer3 connection (marking preserved), however on the layer 2 trunk the marking has been reset to 0 , if I remove the 'mls qos rewrite ip dscp' from 3750-2 then I see the marking on the layer 2 trunk, however I am then unable to remark anything generated on this switch. I believe with the 'mls qos rewrite ip dscp' enabled the L3 to L2 transistion removes the IP DSCP sets the COS to 0 and themnthe COS to DSCP mapping ensures the DSCP is set back to 0.I have tried implementing additional marking policies on 3750-2 but to no avail.What I need is ensuring that that a frame / packet marked in 3750-1 can keep it's marking to the end system over layer 3 and a layer 2 trunk. The only place I wan t the marking to be stripped off is when the dot1q tag is removed as it goes through an access port.

View 1 Replies View Related

Cisco Wireless :: WAP4410N - Unable To Access Local Lan Systems

Jul 20, 2010

I brought one WAP4410N Wireless-N Access Point and successfully configured with out fail as suggested on getting started and I am able to access internet but unfortunately I am unable to access our local servers and services which in LAN (mail-postfix, chat-spark) like.

View 1 Replies View Related

Routers / Switches :: Connect Two Systems Together But Was Giving Error That Contact Network Administrator

Jan 30, 2012

Trying to connect two systems together but was giving error that contact network administrator,one system is laptop with wireless and other is desktop but connect through cable but running windows XPSamson

View 1 Replies View Related

Linksys Wireless Router :: E1200 DHCP Systems Loose Ability To See Other Network Computers

Nov 22, 2012

Have Win7 and XP systems in my network wire connected to the router. When IP of both systems are not reserved, each computer can see other network computers and devices, five in total.A good thing that both systems get each time same IPs which even got not changed since I upgraded from E1200.When I reserve an IP for each system exactly that they currently have, both systems loose ability to see other network computers. Network shares not affected, I still can remotely access my XP box remotely from my 7 via RDP by computer name. WDTV Live wirelessly connected to the router can get/update its IP address (no connection issues) but same as others cannot see network resources.

Tried different ways, rebooted, finally ended up with device reset pushing the button.The next day I managed to reproduce the issue, but was able to revert by disabling/enabling of DHCP server.Another issue I got with an external HD connected to the router when some files got converted to folders by uTorrent started from that drive.I had to use Unlocker application to be able to delete folders converted. I can just assume that issue because of anonymous access was enabled to the external disk. No problems when same HD connected to PC USB.

View 9 Replies View Related

Cisco Switching/Routing :: Calculating 4500X Power Consumption Requirements To Select Appropriate UPS Systems

Jun 2, 2013

I am calculating Cisco 4500X power consumption requirements to select appropriate UPS systems. I have 4500X switch with dual power supplies.which value should I take for power consumption calculation, in data sheet it has two values: AC Power Max Rating: 750W System Power Consumption: 330W nominal/400W max
 
Which values should I take, to calculate UPS systems capacity? And also I am interesting when 4500x has two power supplies what is power consumption?

View 5 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved