Cisco Wireless :: WAP4410N - Unable To Access Local Lan Systems
Jul 20, 2010
I brought one WAP4410N Wireless-N Access Point and successfully configured with out fail as suggested on getting started and I am able to access internet but unfortunately I am unable to access our local servers and services which in LAN (mail-postfix, chat-spark) like.
View 1 Replies
ADVERTISEMENT
Jan 11, 2011
I have a WAP4410N that only allows my laptop local access, no Internet. Here is the scoop:
- Other users connect to the WAP and get Internet access
- Laptop connects to many other networks and has Internet access
- Laptop is running Vista
- ipconfig /all has address, mask, gateway, DNS, and looks normal
- Adapter is Atheros AR5007 802.11b/g with latest drivers
View 2 Replies
View Related
Oct 17, 2010
I recently bought and installed a WAP4410N access point (using PoE) and it's running stable. I was able to access the web-based configuration by using the IP address of the AP (something like 192.168.0.184, coming from the DHCP of my router). However, I'm unable to access the web-based configuration using the host name of the device (mentioned next to the device name in the basic setup section of the web-based configuration). I changed the host name several times, but I can't connect to the device using the host name. Accessing the device by its IP address works, but I have to check the logging of my router to find out which IP address I have to use. Is there a way to access the device using the host name?
(I think my WAP4410N has firmware version 2.0.2.1 installed)
View 3 Replies
View Related
Sep 7, 2012
I have an EA2700 running latest firmware 1.1.38.138827. It is using Cisco Connect Cloud. I am unable to access the DHCP Reservations link under Connectivity/ Local Network. When I click on it, nothing happens. I've tried multiple browsers including IE 10 (Windows 8 RTM), Firefox 15, and Chrome 21. I also tried on a Windows 7 machine with IE 9 and the link doesn't work on that either except that it shows a box that says Invalid Character when I click on the DHCP Reservations link. I see no invalid characters on the screen. Any workaround other than downgrading the firmware or assigning static IPs on individual PCs?Also, on an unrelated note, where is the Dynanic DNS configuration on the Cisco Connect Cloud?
View 8 Replies
View Related
Sep 30, 2012
After I changed the router password today, I am not able to access the Internet through my machine. Seeing the 'Unidentified netwrok, access to local only'. However, other people connected to the same network are using Internet
View 14 Replies
View Related
May 22, 2013
Does Cisco ASA 5540 Support VPN Access on MAC Systems ??? Is Anyconnect available for MAC ?I am also having trouble running Clientless VPN on MAC , not able to start smart tunnels?
View 1 Replies
View Related
Jan 8, 2012
I recently installed a WAP4410N for a customer without any problem, but a few days later I received a call requesting assistance as the customer could not login to the web admin page.
The login screen was showing, but it wasn't acceptingthe username and password that I had set. Today I visited customer to investigate.
I discovered that I could login without any problem using my Windows laptop, but that customer could not use any of their Apple MACs to login.
Apart from one Windows PC, all customer computers were Apple OS. Customer could login using their Windows PC without any problem.
View 2 Replies
View Related
Mar 30, 2011
I just started a new job and recently got my CCNA and CCDA. I hop into this new job and no one knew information to the networking. They decided to re-ip the site and they had 3 wireless access points. I had to hard reset and re-configured the WAP. All the laptop in the building have reception and can get internet. If i connect anyone cell phone, wii or tablets to the wifi, it does not connect.
View 3 Replies
View Related
Mar 2, 2012
in office we have a broadband internet to 6 systems one router .I want to control the partcular system internet
View 1 Replies
View Related
Nov 14, 2011
What should i do on my Cisco ASA 5505 firewall to grant access to my network systems to access internet via gateway. I use ASDM to configure the firewall.
View 5 Replies
View Related
Jan 20, 2012
I am unable to go online wireless local only tried changeing ipv4 to automatic ip still no joy can get online with cable comp shows im connected to my network limited and another
View 1 Replies
View Related
Apr 30, 2011
I have the following equipment:
Cisco 871W router
2x WAP 4410N APs running 2.0.3.3
I currently have 1 AP connected to the router via copper. The AP to AP link is over 802.11. I have attached a diagram reflecting the current topology.
The AP-to-AP link will come up utilizing B/G/N mixed mode; however, the connection is basically unusable. About 30% of the traffic is dropped, while the packets that do make it have a consistently volatile latency, anywhere from 15 to 1500 ms. I have had success using G-only and B/G mixed. The link is stable (I have had the best results with B/G). The problem is, I didn't buy the 2nd 4410N to run the G protocol. I would like to connect the APs running either B/G/N (hopefully negotiating to N) or N only. I am wondering if there is a certain configuration I can utilize (perhaps using WDS repeater or bridge versus Wireless Client/Repeater?), or a firmware upgrade set for release that can make this happen for me.
View 1 Replies
View Related
Apr 9, 2013
I've had some long standing issues that I've tried various things to fix. I have two WAP4410N access points set up at a smaller sister company. Wireless clients (laptops) are not receiving DHCP assigned IP addresses. If I type in an IP manually, it works fine.The sister company has a point to point T-1 connection to our main building. Our main building has the DHCP server. The router on the sister company end is configured as the DHCP relay.
I've upgraded the firmware three different times in the past to hopefully resolve the issue, but no luck. Just today, on one of the WAP4410N's, I upgraded to the 2.0.6.1 firmware (backing up config, reset to factory default, upgraded firmware, reset factory default again, restored config). After the first reset to factory defaults, the Access Point itself picked up a DHCP address from the server, and I verified this in the DHCP console on the server, so I know that the DHCP relay is working. However, my laptop would not get a DHCP address when connecting wirelessly through that access point. It is a Windows 7 Enterprise laptop. I also could not get a DHCP IP with my iPhone connecting to wireless, to rule out specific issues with just a laptop.I have the DHCP lease times for the subnet that these WAP4410Ns are on set to 2 hours.
To put a cherry on top, there is one laptop that stays in a lab area at all times, connecting wirelessly, and it DOES get a DHCP IP address (I can see in the DHCP console that the lease for this laptop continually renews as needed). I do remember on initial config when I couldn't get it to work, that I did a manual set up, gained connection, then switched it to DHCP...but that doesn't work for any other laptop.Why would the access points get DHCP address, but not anything connecting to the Access Points?
View 5 Replies
View Related
Sep 29, 2011
I recently purchased a WAP4410N and I have some problems getting it to work. I am on a 192.168.1 network so everything should be ready to go. I am unable to ping the default address 192.168.1.245 for the wireless. During the process of resetting the device I am able to ping it for a few seconds. I am able to see the wireless connection but I am unable to access it even though it is unsecured. All lights are on the device except the PoE light.
View 4 Replies
View Related
Mar 17, 2013
i have more then 25 Cisco WAP4410N AP put is our office. i put 4 AP in each floor.we are using signal SSID for all AP. I have two question
1: want to monitor all AP if any is down we can trouble shoot it .
2: with some user have problem before connecting it show full signal but after connecting signal is drop.some time
connected PC is automatically restart wireless connectivity.
As a Admin i want to monitor what is going on.
View 2 Replies
View Related
May 13, 2012
In a bit of a pickle and not sure which way to turn as I think I have exhausted all possibilities.We currently have 2 Cisco WAP4410n wireless access points running within our network. They are both on version 2.0.4.2 firmware and both on a static ip address within our infrastructure and are not working.
View 2 Replies
View Related
Sep 13, 2011
Does the Linksys AP (WAP4410N) support Wireless Guest access solution?
View 2 Replies
View Related
Jan 8, 2011
just i purchase cisco access point and I tried to access control panel to setup wireless security but the page i issued not display 192.168.1.245, there is any wayes to connet device web base ??
View 4 Replies
View Related
Nov 8, 2010
I just managed to get hold of an old second hand WAP4410N from a friend who got it for work but never really had the time to get it working. I powered it up and performed a 30/30/30 reset to get rid of anything he may have done to it but now I'm struggling to get to the management page. The power light is steady and the ethernet light shows activity but I can't seem to find it on any IPs. I've tried both hooking it into a router and setting up a laptop with an IP of 192.168.1.2, subnet mask of 255.255.255.0 and gateway of 192.168.1.245 and I still have no luck. I'll fiddle with it more tomorrow but it'll probably just involve messing around with more settings and resetting it again, nothing of any real structure. Is there any way of forcing a new firmware onto it over the MAC address or something, for example?
View 3 Replies
View Related
Apr 19, 2011
I have two Cisco WAP4410N access points. Both has Regular and Guest SSIDs, with same configurations, except "Wireless Isolation" on Guest SSID is enabled. Problem is Guest SSIDs are not visible on devices
Access points are working on different chanles, firmware Version: 2.0.1.0.
View 5 Replies
View Related
Jun 12, 2011
I got a CISCO wap4410n access point and it is disconnecting uses after a shorl while. I hv to again connect them manually.
View 1 Replies
View Related
Dec 7, 2011
My boss just asked me if there was a way for him to move from point A to Point B with his wireless laptop and NOT have to reauthenticate at point B if I install another access point there. Right now I have us setup on a Cisco WAP4410N Access Point that works well when he's within range of the antenna. The point B location is upstairs and while it's only about 50-70 feet away from the Point A access point the signal he's getting there is very weak so he wants me to install another AP there.
IOW he wants to authenticate once at point A and when he walks up to point B he wants the laptop to pickup the newer hotter signal when I put another AP point in.
View 3 Replies
View Related
Feb 2, 2011
I want to make a bridge with 2 WAP4410N access points.But what is the totaly distance that the access point can make to have an good connection in an open area?
So example:one WAP4410N in a house (near a window) and the other in a house (near a window) and the 2 houses lie 200 meters of each other. Is this possible?
If it is not possible with this access points, what is then an option/possibility ?
View 1 Replies
View Related
Jul 5, 2012
I have 5x WAP4410N Cisco access points, the wireless is not responding to join request from wireless clients and i can only access the admin page from the LAN side.
reboot does not work the only way to make it accept join requests is by changing parameters in the AP and save it, it will work for few hours then stops again.
I cant seem to be able to open a TAC case.
View 1 Replies
View Related
Sep 12, 2011
i have two WAP4410N wireless router. with software version (2.0.1.0) , here i have a problem on SSID broadcast and access.i have created Two ssid's WC72 and SREE with same security configuration WPA2-personalmixed . i cant see the broadcasted SSID of name SREE where i only view WC72 and get connected to it..
where i initially want is separate SSID and internal network access for internal employees and Guests (shouldn't connect to internal network).
View 9 Replies
View Related
Jun 25, 2010
Recently I have purchased two brand new wap4410n access points.
I have connected my computer directly to one of the access points, and attempted to connect to the Web Configuration utility through my web browser.
I'm using a: 09' MacBook Pro, running Snow Leopard and Safari 5.
I can access the login screen of the access point, although when I enter the default username: admin and password admin, the login screen returns an error: Invalid username and/or password (or something to that effect). The URL changes to: http://192.168.1.245/login.htm&no=3.
I have reset the device by holding in the reset button for thirty seconds, powered down, powered up and re-attempted to login.
I still get the same error as above.
I have attempted to access the Web Configuration utility on both access points, and both access points provide the same error. I have also tried using the username: cisco and password: cisco.
Cisco, when contacted, said both access points must be faulty and I should replace them.
The probability of such an occurrence happening with two devices seems very low, and leads me to think there must be other factors at play. The only constant I can think of is the fact I'm using the same computer to access the devices.
View 4 Replies
View Related
Feb 21, 2013
Does Cisco WAP4410N Wireless-N Access Point support PPPoE ?If yes how can I configure the PPPoE conexion?
View 1 Replies
View Related
Jun 17, 2011
I have a WAP4410N access point. In the datasheet, it shows that the Antenna Gain in dBi as 2. I need to increase the range of the access point by replacing the antenna with a 7dB one. I would like to know the maximum dBi supported by this access point.
View 0 Replies
View Related
Sep 29, 2010
We have 3 WAP4410N on our network. Our laptops pick them up but I cannot access the configuration Utility or ping the default IP address. If their IP addresses have been changed how do I find out what their current IP adds are? We currently use static IP addressing for our network.
View 2 Replies
View Related
Mar 27, 2011
i wanna to know the ip address of the systems in my wifi network in win 7.
View 1 Replies
View Related
Nov 26, 2011
I just replaced my wireless router. Wh? Now I'm not sure, I hoped a dual band router would give me better range. True or false?Regardless, I installed my new router but can only connect to my local network on my home laptop. However my work laptop connects to the same network and internet with no problem. SO does my husband's work computer.Any idea what the problem is? Other weird thing is that I have some random unsecured network that keeps popping up and my computer keeps automatically connecting. I've tried to remove it every way possible and it keeps coming back?
View 1 Replies
View Related
Apr 28, 2012
My laptop has windows 7 , its connected to the internet wireless , now , i want transfer files from my desktop to the laptop so i cannect them with an ethernet cable.. now how i can make that happen , my desktop has window xp
View 1 Replies
View Related
Jan 3, 2012
In Windows Vista I am able to connect to wireless router, but can't access internet due to Local message only. Have repaired network adapter , reset cable modemm unchecked version 6 of TCPIP network settings.
View 3 Replies
View Related