Cisco Firewall :: Can ASA5505 DHCP Support 22 Bits Subnet Mask
Feb 11, 2013I have an ASA5505 which provides internet (just internet) for about more than 600 pc/laptops. Can 5505's DHCP support this number?
View 4 Replies
ADVERTISEMENT
Cisco Switching/Routing :: WAG54G2 Doesn't Support A Subnet Mask
Dec 13, 2011We have 10 ADSL lines and 5 of them goes in the load balancer (One gateway) and the rests are used as default gateways for internet access. We use ADSL routers as access points for internet, but those routers should be part of our network and should be given an address in order for them to act as default gateways for internet access. I'm facing a real prob with the ADSL routers Linksys WAG54G2 because they doesn't support a subnet mask 255.255.0.0 Any recommendation for an ADSL router model that support a netmask 255.255.0.0 ?
My cisco 2811 router interface configuration ip address: 172.20.0.1 255.255.254.0.Load balancer output lan ip address: 172.20.0.5.My ADSL routers will be in the following range : 172.20.0.6 - 172.20.0.10
Cisco Firewall :: Changing Subnet Mask In An ASA5520 Interface
Aug 8, 2012We have an ASA 5520, working fine.One of the interfaces is connected to users PCs and printers mainly. Last months the number of devices has grown rapidly, and we would like to make some changes in it in order for it to be able to host new devices.We thought on change subnet mask of actual subnet (10.0.2.0/24) to 10.0.2.0/23, so it can hold as many devices.I understand I have to make some changes in the ASA, but my question is:What will happend to the acces rules I have created?Will I need to create them again? There are some objects which carry information about subnet mask, so I suppose I will need to redefine them, but for those without any subnet mask information, will I have to redefine them?
View 2 Replies View RelatedCisco Firewall :: ASA5505 / Error / Network IP Address / Mask 10.10.2.65 / 255.255.255.0 Doesn't Pair
Feb 27, 2013I need to create a vpn connection between two ASA firewalls and when trying to create this AI get an error message below, The config I was to use is -
object net-local
Subnet 10.51.212.1 255.255.255.0
object network net-remote
subnet 10.10.2.65 255.255.255.0
ERROR: network IP address/mask <10.10.2.65/255.255.255.0> doesn't pair
Change Subnet Mask 255.255.255.0 To 255.255.0.0?
Jan 28, 2011our subnet mask is 255.255.255.0....can I change it to something else like 255.255.0.0.
View 4 Replies View RelatedAccess Computer In LAN Outside Subnet Mask?
Jun 12, 2012I have old interface hardware with Static IP 10.2.2.200 and on the same switch I have computers with IPs of 10.4.1.0 If I change subnet to 255.0.0.0 old hardware with 10.2.2.200 will be accessible. The problem is that I would like to have 255.255.255.0 as subnet but it should still be possible to access 10.2.2.200. Can I add Static route for oldhardware in XP without adding gateway settings? The most simple would be to put all on same subnet but it is not possible due to a various reasons. The computers are running Windows XP
View 10 Replies View RelatedRouters / Switches :: What Is Subnet Mask Of 10.2.1.3/22
May 8, 2011what is subnet mask of 10.2.1.3/22
View 1 Replies View RelatedWhy Do Class D Doesn't Have Subnet Mask
Apr 27, 2011why do class D doesn't have subnetmask
View 1 Replies View RelatedCisco :: Calculate Subnet Mask For Router?
Jul 13, 2012I want to calculate Subnet Mask for 3 Router Each one in separate building the First building need 60 host and the second building 25 host and the last one 25 host .
Knowing that the company currently reserved public class C network address 210.2.1.0/24 for internal address and subnet 210.15.10.0/30 for the connection to the Internet router.
Cisco Routers :: RV082 LAN Subnet Mask
Nov 12, 2012I would like to set the subnet mask off the lan to 255.255.240.0 but the selection menu do not allow to do it.
View 8 Replies View RelatedConnect Two Computers Together - It Requires Both IP And Subnet Mask?
Mar 6, 2011I understand ip addressing and what a subnet is.But why is it sometimes I connect two things together,it always requires a subnet mask, and other times no? For example when I try to connect two computers together, it requires both IP and subnet mask.But if I use FTP software all it ask for is IP.Same thing when connecting to a website through their ip, doesn't require subnet.
View 6 Replies View RelatedWireless Router Does Not Accept Subnet Mask
Feb 27, 2013I am using TP-Link wireless router model no. TL-WR941ND.my isp provided static ip via cable modem.ip = a.b.c.d subnet = 255.255.255.254 = /31 but the router does not support subnet mask saying wrong subnet mask?
View 2 Replies View RelatedCisco Routers :: WRVS4400N Subnet Mask Limitation
Jun 26, 2012I want to use a subnet mask of 255.255.254.0. The setup window doesn't allow me to type in that mask, rather it only allows me to choose from options on a drop down menu (which doesn't include that mask). Is there a way to do this?
View 2 Replies View RelatedWhat Is Correct Subnet Mask And 10th Address Range
Nov 3, 2012Given an IP address range, select the correct subnet mask for the scenario. IP address: 132.250.0.0/16, You need to create 100 networks with a minimum of 500 hosts per network. What is the correct Subnet mask and the 10th subnet address range?
View 1 Replies View RelatedHow To Find IP Address / Subnet Mask And Default Gateway
Apr 18, 2013what my IP address, my subnet mask, and what my default gateway is. I have tried typing "ipconfig" into CMD but then I only got up 100 boxes saying "Permissionisconnected"
View 12 Replies View RelatedLinksys Wireless Router :: Subnet Mask 255.0.0.0 On WRT320N
Aug 22, 2011I'm using my WRT320N as a home router, I need more ipadresses to be delivered to my computers, yet I can't get my router to give med wider netmask range. In the list I get 255.255.255.0 - 255.255.255.240 or something like that. I need 255.0.0.0 on my network and that would be perfect if i could get that...
View 5 Replies View RelatedWireless :: Subnet Mask Address Is Illegal Cisco Linksys?
Feb 23, 2011subnet mask address is illegal cisco linksys?
View 1 Replies View RelatedCisco Routers :: RV042G Subnet Mask Drop-down Menu
Nov 27, 2012after recovering from the PPPoE-port-forwarding-fiasco I had with the RV180 (url...), I decided to try again with a Small Business Router from Cisco. This time I took the RV042G, hoping that the higher age of this product comes with a more mature firmware.So far the functions I need, work satisfying. There is only one issue: The subnet-mask is only configurable using a dropdown-menu. I've read the posts from the Cisco-Support staff saying, that this is because it is only a SMB Router. So, we are a small business and we use the 172.20.x.y net for several reasons. One of it is to distinguish and group several network devices using the third block of the IP. Eg. our printers IPs start with 172.20.5.x and so on.
My question is: Is it really impossible to change the subnet-mask dropdown-menu to a simple text-field in the frontend? Because it is possible to change the subnet to whatever one needs by a little cURL-magic: [code] This sets the new subnet-mask permanently (even survives a reboot and is displayed correctly on the system-status page) and I have not discovered any problems.The only thing is, if you change settings on the setup -> network page, the netmask is reset and you have to rerun this script.
Cisco Firewall :: ASA5505 Alias Secondary Subnet / No Communication Between Them?
Aug 17, 2011As this is an ASA 5505, unlimited users, I must use arp alias to allow a secondary network.
Inside network: 10.200.31.0/24.Additional inside network: 10.200.12.0/24
Clients in both networks can reach internet, but they can't communicate with eachother. Hosts on the additional network can ping the ASA inside network IP, but nothing else. I get incomming hitcount for inside interface when 10.200.12.x tries to ping 10.200.31.x. In the error log, I see: [code]
Laptop Receives IP Address / Subnet Mask And Gateway - No Internet Access
Sep 28, 2011Have a problem with a laptop connecting to a Wireless Router. The laptop was working fine on the last router which was on an ADSL Network.. (not that that matters),When the new router (Virgin Media / Cable) was installed all other laptops where connecting to it without any probs, but not this one.The laptop in question still receives an IP address, Subnet mask and Gateway from the router - Vista says Local only, no internet access. It cannot ping anything else on the network either. When I do ping it comes back destination host unreachable.
View 6 Replies View RelatedCisco Firewall :: Access ASA5505 With Telnet Or ASDM From Remote Subnet?
Jul 11, 2012I have a network with 3 sites that are on different subnets. Each site has an ASA Right now, I am only able to connect to the ASA that is connected to the subnet I am connected to.I want to be able to connect to the ASA that are on the remote subnets on the address of the inside interface.The sites are connected all together by site-to-site VPN.Is there any way I can achieve that without opening the outside interface directly on the Internet?
View 2 Replies View RelatedCisco WAN :: Does 837 Router Support 2048 Bits Certificates
Oct 16, 2012Does the Cisco837 router supports 2048 bits certificates?
View 1 Replies View RelatedCisco Firewall :: DHCP Scope Limitations For ASA5505
Feb 22, 2013I have a ASA5505 that i have running asdm 6.4 on it and have tried setting up some DHCP scopes for the interfaces.I have the security plus key.I set up 4 interfaces all with different subnets and all with different DHCP being doled out by the firewall for the time being.Anyway, 3 of the 4 work.I have tried to change interfaces wondering if there was an issue with that phy device.I tried enableing the subnet that would not work first and it didnt matter still would not issue dhcp.the other 3 work fine.Is there a limitation to the amount of scopes that will issue dhcp for an asa5505 ?
View 3 Replies View RelatedCisco Firewall :: Get DHCP Information From ASA5505 Using SNMP?
Feb 13, 2013I have a ASA5505 with version 8.4(3) that it's working as a DHCP server and I would like to get information about IPs availables (or assignated) on theirs pools via SNMP but I can't find the MIB or OID that I need.
What MIB that I need?
Cisco Firewall :: ASA5505 Disable DHCP On ASA And Enable On WNDR3700
May 13, 2013I have ASA5505 as my main router (192.168.15.1) and it currently it also serves as DHCP server. I have a WNDR3700 (192.168.15.2) which work as an access point and it provide wireless access for wireless devices. I have few dhcp clients where i can't setup static IP, and i want to restrict them to use static IP through MAC reservation.
1. Make ASA5505 to do the MAC reservation f, which will be easy setup for me. But as per my search its not possible.
2. Disable dhcp on ASA and enable dhcp on my WNDR3700. i tired this and dhcp clients are getting IP from wndr3700, but the problem is dhcp clients gateway defaults to 192.168.15.2 (as well as dns) and therefore no internet connection.
Cisco Firewall :: ASA5505 / Pcs To Get Their IP Addresses Directly From DHCP Server?
Feb 7, 2012We have a Cisco 5505 ASA fireawll at a remote site. I can get the firewall to issue the IP addresses to the pc's, Is there a way for the pc's to get their IP addresses directly from our DHCP server?
View 3 Replies View RelatedCisco Firewall :: 10-User License For ASA5505 Allows DHCP To Hand Out 32 IPs?
Dec 26, 2011My cisco representative tells me that I am limited to 10 IP addresses for my 10 user license on an ASA 5505 even though the Cisco documentation specifically states that a 10 user license allows the maximum DHCP clients to 32 IP addresses.
I want to have 30 computers get IP addresses from the ASA, but don't need any but one or two to get outside the internal network. Is this possible with a 10 USER license.
Cisco Firewall :: 10-User License For ASA5505 Allows DHCP To Hand Out 32 IPs
Sep 27, 2011My cisco representative tells me that I am limited to 10 IP addresses for my 10 user license on an ASA 5505 even though the Cisco documentation specifically states that a 10 user license allows the maximum DHCP clients to 32 IP addresses.
I want to have 30 computers get IP addresses from the ASA, but don't need any but one or two to get outside the internal network. Is this possible with a 10 USER license.
Cisco Firewall :: 5510 - Cannot Ssh After Mask Change
Aug 7, 2011I needed to change the mask, not the ip address, of the outside interface of an 5510 running 8.2(3).
Immediately afterwards I could establish ASDM but could not re-establish SSH.
I tried the following:
Zeroize the rsa key and generate a new one Create a new SecureCRT session to accept the new key
That didn't work. All I have is ASDM access.
Dual DHCP Or Access Devices On Different Subnet?
Aug 23, 2011I have a problem with my 2 networks which are 1000 meters apart.One is my HOME the other is my CARAVAN SITE. both networks are working fine independently, the problem occurs when i join the networks together.I need to connect the said networks together in order to view my IP cameras which are dotted all around the campsite, i need to be able to view these from HOME.The problems i am having is DHCP servers are stealing clients from the other sides and directing them to the wrong gateway.please see below network map (these routers are all running DDWRTBelow is another network map which someone on another forum told me to do but its still not working. (DHCP servers are still clashing and still stealing clients)y the way, on both of the network maps all routers are connected with the LAN interface. someone told me to connect certain routers with WAN and it didn't work, or it was not explained correctly.Also please note that assigning clients with Static IP's is completely out of the question due to most of the clients being campers who come and go
View 1 Replies View RelatedRouter DHCP Handing Out IP Addresses Not On The Same Subnet?
Dec 22, 2011I have a Belkin model F9K1102 router supplying WAN/LAN connection to three PCs and 2 laptops. Two of the PCs are hardwired with the remainder PC and laptops are wireless. I'm using the default router IP of 192.168.2.1 and my ISP is Charter Cable (if that's of significance). The router is picking up all the dynamic IP information from my ISP and internal DHCP is enabled. Here's the issue though - when I connect a PC, laptop or iTouch (wired or wireless) with obtain IP settings automatically enabled the IP address it receives an IP address on a different subnet ie, 192.168.3.x and thus won't have WAN/LAN connection. I have tried to set the router IP to 192.168.3.1 and set the scope in the .3 subnet but the IP obtained by the device is .4! This makes no sense to me at all. The router is on the latest firmware (according to Belkin) and there doesn't seem to be any other update I can find. I have also tried another Belkin router (older model: F5D8236) and it does the same thing.
I'm not sure if this is related but I upgraded my service with Charter to a 18MB connection and a D3.0 Ubee cable modem - this issue seem to have began after this upgrade but I don't see how that would have any bearing on what is happening on my LAN IP scope and Charter tech support is pretty useless. My workaround is that I've static assigned an IP for each device in the same subnet as the router but it would be nice for the DHCP to function correctly.
2 DHCP Servers On Same Subnet Or Linking Two Subnets?
Aug 6, 2011I have two locations both about 800meters apart, one is my home and the other address is a campsite where i have a linked router network (WDS with routers running ddwrt) where campers can all use the internet and also i have several IP cameras. Obviously both address have different gateways and therefore their own DHCP server. Everything was running perfectly until.I linked both of my address up using a long range antenna and now i am having problems.
Sometimes the two DHCP servers are competing with each other (i need both addresses on the same subnet in order to view my IP cams from home) and sometimes the computers log on to the wrong gateway. Its very annoying because the only way i can resolve it is by turning of the "linking routers" for a minute and then the Computers log onto the correct gateway. This happens to clients both side of the bridge. I have many different clients on both side of the bridge so assigning each computer (via windows) its fixed default gateway and DNS is out of the question as some of the clients are Camper's PC's and mine and my wifes laptops swap between both locations.
Now my query is, how can i block both DCHP servers from going over the bridge? OR can i have them on both separate subnets and still view my IP camera and still access all the routers from each subnet (i need this because sometimes i need to reboot the routers from home)
Cisco VPN :: ASA5505 - EzVPN Support
Nov 24, 2011Cisco ASA 5505 50-User Bundle includes 8-port Fast Ethernet switch, 10 IPsec VPN peers, 2 Premium VPN peers, 3DES/AES license
ASA5505-50-BUN-K9. Cisco ASA 5505 Unlimited-User Bundle includes 8-port Fast Ethernet switch, 10 IPsec VPN peers, 2 Premium VPN peers, 3DES/AES license ASA5505-UL-BUN-K9
I think they will support ezvpn, just need confirm .
