Cisco Switching/Routing :: WAG54G2 Doesn't Support A Subnet Mask
Dec 13, 2011
We have 10 ADSL lines and 5 of them goes in the load balancer (One gateway) and the rests are used as default gateways for internet access. We use ADSL routers as access points for internet, but those routers should be part of our network and should be given an address in order for them to act as default gateways for internet access. I'm facing a real prob with the ADSL routers Linksys WAG54G2 because they doesn't support a subnet mask 255.255.0.0 Any recommendation for an ADSL router model that support a netmask 255.255.0.0 ?
My cisco 2811 router interface configuration ip address: 172.20.0.1 255.255.254.0.Load balancer output lan ip address: 172.20.0.5.My ADSL routers will be in the following range : 172.20.0.6 - 172.20.0.10
View 1 Replies
ADVERTISEMENT
Apr 27, 2011
why do class D doesn't have subnetmask
View 1 Replies
View Related
Feb 11, 2013
I have an ASA5505 which provides internet (just internet) for about more than 600 pc/laptops. Can 5505's DHCP support this number?
View 4 Replies
View Related
Jan 28, 2011
our subnet mask is 255.255.255.0....can I change it to something else like 255.255.0.0.
View 4 Replies
View Related
Jun 12, 2012
I have old interface hardware with Static IP 10.2.2.200 and on the same switch I have computers with IPs of 10.4.1.0 If I change subnet to 255.0.0.0 old hardware with 10.2.2.200 will be accessible. The problem is that I would like to have 255.255.255.0 as subnet but it should still be possible to access 10.2.2.200. Can I add Static route for oldhardware in XP without adding gateway settings? The most simple would be to put all on same subnet but it is not possible due to a various reasons. The computers are running Windows XP
View 10 Replies
View Related
May 8, 2011
what is subnet mask of 10.2.1.3/22
View 1 Replies
View Related
Jul 13, 2012
I want to calculate Subnet Mask for 3 Router Each one in separate building the First building need 60 host and the second building 25 host and the last one 25 host .
Knowing that the company currently reserved public class C network address 210.2.1.0/24 for internal address and subnet 210.15.10.0/30 for the connection to the Internet router.
View 19 Replies
View Related
Nov 12, 2012
I would like to set the subnet mask off the lan to 255.255.240.0 but the selection menu do not allow to do it.
View 8 Replies
View Related
Mar 6, 2011
I understand ip addressing and what a subnet is.But why is it sometimes I connect two things together,it always requires a subnet mask, and other times no? For example when I try to connect two computers together, it requires both IP and subnet mask.But if I use FTP software all it ask for is IP.Same thing when connecting to a website through their ip, doesn't require subnet.
View 6 Replies
View Related
Feb 27, 2013
I am using TP-Link wireless router model no. TL-WR941ND.my isp provided static ip via cable modem.ip = a.b.c.d subnet = 255.255.255.254 = /31 but the router does not support subnet mask saying wrong subnet mask?
View 2 Replies
View Related
Jun 26, 2012
I want to use a subnet mask of 255.255.254.0. The setup window doesn't allow me to type in that mask, rather it only allows me to choose from options on a drop down menu (which doesn't include that mask). Is there a way to do this?
View 2 Replies
View Related
Nov 3, 2012
Given an IP address range, select the correct subnet mask for the scenario. IP address: 132.250.0.0/16, You need to create 100 networks with a minimum of 500 hosts per network. What is the correct Subnet mask and the 10th subnet address range?
View 1 Replies
View Related
Apr 18, 2013
what my IP address, my subnet mask, and what my default gateway is. I have tried typing "ipconfig" into CMD but then I only got up 100 boxes saying "Permissionisconnected"
View 12 Replies
View Related
Aug 22, 2011
I'm using my WRT320N as a home router, I need more ipadresses to be delivered to my computers, yet I can't get my router to give med wider netmask range. In the list I get 255.255.255.0 - 255.255.255.240 or something like that. I need 255.0.0.0 on my network and that would be perfect if i could get that...
View 5 Replies
View Related
Feb 23, 2011
subnet mask address is illegal cisco linksys?
View 1 Replies
View Related
Aug 8, 2012
We have an ASA 5520, working fine.One of the interfaces is connected to users PCs and printers mainly. Last months the number of devices has grown rapidly, and we would like to make some changes in it in order for it to be able to host new devices.We thought on change subnet mask of actual subnet (10.0.2.0/24) to 10.0.2.0/23, so it can hold as many devices.I understand I have to make some changes in the ASA, but my question is:What will happend to the acces rules I have created?Will I need to create them again? There are some objects which carry information about subnet mask, so I suppose I will need to redefine them, but for those without any subnet mask information, will I have to redefine them?
View 2 Replies
View Related
Nov 27, 2012
after recovering from the PPPoE-port-forwarding-fiasco I had with the RV180 (url...), I decided to try again with a Small Business Router from Cisco. This time I took the RV042G, hoping that the higher age of this product comes with a more mature firmware.So far the functions I need, work satisfying. There is only one issue: The subnet-mask is only configurable using a dropdown-menu. I've read the posts from the Cisco-Support staff saying, that this is because it is only a SMB Router. So, we are a small business and we use the 172.20.x.y net for several reasons. One of it is to distinguish and group several network devices using the third block of the IP. Eg. our printers IPs start with 172.20.5.x and so on.
My question is: Is it really impossible to change the subnet-mask dropdown-menu to a simple text-field in the frontend? Because it is possible to change the subnet to whatever one needs by a little cURL-magic: [code] This sets the new subnet-mask permanently (even survives a reboot and is displayed correctly on the system-status page) and I have not discovered any problems.The only thing is, if you change settings on the setup -> network page, the netmask is reset and you have to rerun this script.
View 0 Replies
View Related
Sep 28, 2011
Have a problem with a laptop connecting to a Wireless Router. The laptop was working fine on the last router which was on an ADSL Network.. (not that that matters),When the new router (Virgin Media / Cable) was installed all other laptops where connecting to it without any probs, but not this one.The laptop in question still receives an IP address, Subnet mask and Gateway from the router - Vista says Local only, no internet access. It cannot ping anything else on the network either. When I do ping it comes back destination host unreachable.
View 6 Replies
View Related
Jun 28, 2012
We have a customer that has a fiber rum between 2 building. They want to have 2 seperate fibers active that terminate into the same switch on each end. (redundancy).
In building A they have an extreme networks black diamond switch that does not support STP.In bulding B they have a Cisco 4507.
We will ahve to use a layer 3 routed connection due to the fact their switch in building A does not support STP.Our tech does not want to use static route becuase he does not want to setup IP SLA for the redundant connection.
Will RIPv2 work for this scenario and failover to the other fiber if needed? The hop count is the same for each fiber path..
View 2 Replies
View Related
Feb 27, 2013
I need to create a vpn connection between two ASA firewalls and when trying to create this AI get an error message below, The config I was to use is -
object net-local
Subnet 10.51.212.1 255.255.255.0
object network net-remote
subnet 10.10.2.65 255.255.255.0
ERROR: network IP address/mask <10.10.2.65/255.255.255.0> doesn't pair
View 2 Replies
View Related
May 24, 2012
Got a shiny new SG 200 26P which seems to work fine operationally.owever, when I am trying to access the web interface from a different IP subnet, the web brower just times out.If I put my PC on the same IP subnet, it works just fine. From the other subnet, I can ping the switch fine. The default gateway is set on the switch, and from the web interface I can ping and dns resolve other hosts and on the internet. I've tried to create a management profile to 'allow all from everywhere' basically, but still no luck.I'm completely stumped. I've tried to reset to firmware defaults, and I'm now runinng the latest firmware. I woudl suppose that the switch would allow itself to be managed via the web interface from all subnets by default. Any thoughts? The fact that the switch can ping internet hosts makes be believe it's own default gateway and IP are all ok and working.. (and I can ping it from anywhere in my network).
View 4 Replies
View Related
Jul 16, 2012
Getting a lot of the following errors on our 5508 form the same subnet: 10.20.0.1 255.255.248.0 . I tried researching and not getting much.
broffu_SocketReceive: Jul 17 10:11:10.068: %DATAPLANE-3-DP_MSG: broffu_fp_dapi_cmd.c:2891 FP0.09:(7089389)[cmdAddIpv4:2921]failed to find ipv4 10.20.6.58
[code]....
View 2 Replies
View Related
Feb 20, 2012
I’ve configured a small WLAN for a school that wants to have wireless network access for their staff as well as for guests doing presentations. They want the staff to have access to everything on the 192.168.1.0 /24 network as well as the Internet. They want the guests to only have access to the Internet. I have attached a picture which shows how the network has been configured with 4 Cisco AP1242G AP’s attached to a Cisco SF302-08MP PoE switch and then to a Symantec Security Gateway to the Internet.
I can authenticate wirelessly to the STAFF SSID and ping anything on the 192.168.1.0 /24 network and access the Internet.I can authenticate wirelessly to the GUEST SSID and ping anything on the 172.16.1.0 /24 network, but not anything on the 192.168.1.0 /24 network (which is what we want). However, when on the GUEST network you can’t access the Internet. I added a default route to the Cisco 302-08MP switch to 192.168.1.1 (Symantec firewall) thinking that would forward the traffic from 172.16.1.0 /24 to the Symantec firewall out to the Internet, but that isn’t working.How would I go about getting the traffic from 172.16.1.0 /24 to hit the Symantec firewall and the Internet, without hitting anything else on 192.168.1.0 /24? Do I need to put the Symantec firewall in a different subnet like 192.168.2.0 /24? Am I missing anything else?I’ve worked with Extreme Networks & HP / 3Com CLI in the past, but never with Cisco and never with web based management
View 1 Replies
View Related
Feb 9, 2012
I have Catalyst C3750G switch
with configured route to subnet 192.168.201.0/24
ip routing
ip route 192.168.201.0 255.255.255.0 192.168.160.13
192.168.160.13 is accessible
[Code].....
View 5 Replies
View Related
Feb 14, 2012
we have some devices on the network which cannot be secured and we need to isolate from the rest of the subnet.Our switches are Cisco 2960.Is it possible to via an ACL local a specifric port down to only allow traffic from specific MAC addresses? I've had a go at this myself but not been able to make any progress. The traffic type is TCP/IP.
View 10 Replies
View Related
Jan 14, 2013
We have two switches; a WS-C3550-48 and a WS-C3548-XL connected via fiber uplink ports. Both switches are on the same subnet 192.168.1.0 /24. I would like to change the subnet of the second switch, WS-C3548-XL, to be on 192.168.2.0 /24. Would it be possible to assign 192.168.2.x IP addresses to both uplink ports to achive this?
Or would I need to create a separate VLAN and assign both GigabitEthernet0/1 uplink ports to this VLAN?
View 5 Replies
View Related
Feb 5, 2013
I have an issue with the device in subject. I need that some server, listed as service on CSS, can contact a content VIP on the same subnet. To allow that traffic I configured grouping on CSS (group 1) with vip address and an ACL that allow traffic from subnet 10.1.1.0/24 toward same subnet 10.1.1.0/24 and I have bound this ACL with sourcegroup 1. The nat and portmap works but never at first attempt, instead since second attempts it works. Seem like a CSS require to much time to create nat entry.
View 4 Replies
View Related
Oct 7, 2012
I have a customer who has an ASA 5505 that is handling the routing for their internal network. They are running out of available IP addresses on their subnet 192.168.1.0/24. They have dumb switches that don't suppport multiple vlans or trunking & they are only able to connect to one switchport on the ASA. He doesn't not want to purchase any new equipment or rearrange their existing equipment at this time. The customer would like to statically assign IP addesses for 192.168.1.x & 192.168.2.x and have the ASA hand out DHCP addresses for 192.168.3.x addresses. The customer suggested configuring a super subnet. A 192.168.0.0/22 address scheme would provide an ip range 192.168.0.0 - 192.168.3.255 on a single VLAN. I know this is an unconventional way to setup an internal network & I will definitely advise the customer that this should only be considered as a temporary solution until they get more appropriate network equipment.
View 3 Replies
View Related
Mar 15, 2013
I have forgot this technology name, but, I remember it can achive on between Nexus 7000s in two location, and also between two catalyst 6500.Can I ask if it can be done between one nexus and one catalyst 6500?
View 8 Replies
View Related
Jan 25, 2012
I recently bought SG-300 28P to create the VLAN. My network hs 3 subnet 192.168.1.0, 192.168.2.0 and 192.168.3.0.My main net work is 192.168.1.0. I want to divide it to VLAN to eliminate the boardcast storm; especially from the domain 192.168.3.0
But I want all the devices from 192.168.1.0 to access other subnet.
View 4 Replies
View Related
Jun 28, 2012
I need to configure the C3560-24TS, QoS control by IP or subnet.i tried to study books and videos many times but still feel i am not well known about QOs...
View 1 Replies
View Related
Nov 27, 2012
how to know if my bgp neighbour advertised my network from his side or not ???
here is my config :
Gateway7600#sh ip bgp
BGP table version is 8, local router ID is 192.168.40.3
Status codes: s suppressed, d damped, h history, * valid, > best, i - internal,
r RIB-failure, S Stale, m multipath, b backup-path, f RT-Filter,
x best-external, a additional-path, c RIB-compressed,
Origin codes: i - IGP, e - EGP, ? - incomplete
RPKI validation codes: V valid, I invalid, N Not found
[code]....
View 5 Replies
View Related
Jun 20, 2012
I am trying to modify the OSPF admin distance for a specific subnet under version 5.1(5) of the Nexus 7K, but this command does not appear to be available.
View 1 Replies
View Related
