Cisco Firewall :: Security Manager 4.3 Standard Install / Setup?
Mar 26, 2013
We got this software from Cisco and we need to setup this in our network to manage the firewalls.Need to know this software is used to centrally manage the firewalls ?Also how i can i know how to setup this in our network?Assuming this software we will first install on server right? it can be windows server ?Second thing to know is what config changes we have to do on the existing and new ASA so that they can be managed centrally?Also Where i will get the documents that tell me how to setup/install this software?
Can I install win2008r2 standard to a 500gb usb ultra portable harddrive and connect it to my net book and run it ? I am studying for the MCITP and want to use it for that purpose?
I'm trying to add our two 5585-X + CX20 units to Cisco Prime Security Manager. The ASAs seem to add correctly but the CX20s appear "undefined" for software version and model. Clicking on "Device Configuration" I get the error "Message From Server: SyntaxError: Unexpected token .
I´m looking at this document: [URL] and I´m not clear if Windows Server 2008 R2 Standard with SP1 is supported. The documentation refers to Windows 2008 Server SP2 and Windows 2008 Server R2, but I see no specific mention to Windows Server 2008 R2 Standard with SP1.
regarding device package for Cisco MCS 7835-I3 [Cisco 7800 Series Media Convergence Servers] . I have added Call manager in LMS 3.2.1 but showing ? as there is no device package installed in LMS.
we would like to setup FTP server over CSS where our member sever use non-std-port to open both control/data channel (i.e. 6370 as ctrl and 6369 as data this case.) but seems we only get Passive mode FTP mode work only but not for Active mode FTP case for data channel establishement for server back to client..
# sh ver Version: sg0820501 (08.20.5.01) Flash (Locked): 08.10.1.06 Flash (Operational): 08.20.5.01 Type: PRIMARY Licensed Cmd Set(s): Standard Feature Set
I want to install Microsoft Security Essential on my PC, but I am not sure which download I need. One says amd64 and the other is x86. I am using windows xp 32bit.
I have windows xp home and the last few days a security installation has kept trying to install ie: "Microsoft Visual C++ 2005 Service Pack 1 Redistributable Package (KB2538242) (update 1 of 1)..."
I would like to use the Cisco ATA 186 as a SIP device with Cisco Call Manager 7. However, I have found that the SIP firmware for the Cisco ATA 186 is unsupported by Call Manager 7.Therefore, In order to use the ATA as a SIP device with the Call Manager, I believe I will need setup the ATA as a 3rd Party SIP device by doing the following:
1. Disable the TFTP option within the ATA, so that the SIP firmware is not overwritten by firmware from the TFTP server.
2. Install the 3.2.1 SIP firmware on the ATA, since the ATA is currently running the 3.2.4 SCCP firmware.
3. Register the ATA, as a third-party SIP device, with the Call Manager .Should I register the ATA as a 3rd party device?
We are testing a Zone Based FW config since 1month, everything run smooth but we're having problem ( big slow speed access ) when a user try to reach a website on a non-standard port ( 8080 in that case ). All the trafic stay in our LAN, using a IPSEC/EZVPN connection between the 2 sites.As soon as I have disabled the Zone Based FW, the speed was much better.
I'm sure I'm missing a parameter to fix that problem but I tried many different options and I didn't find anything yet. All the routers are Cisco 1811 running adv IP Services 15.1.2.T1 IOS.A port-map has been created to map the port 8080 to the HTTP protocol for the inspection.The PC will have an IP address in the 10.2.2.x/24 and will access a server on 10.2.3.x/24, both devices are part of the zone private in each site/LAN.All the access between sites are managed by an ASA; the IPSEC/EZVPN peer.Little summary, it's gonna be something like : SiteA with a PC on private zone then on public zone for the EZVPN to SiteB on public zone and then private zone to access the server in the LAN.
I did an ISE 1.1.1 installation on a VMWare with ESX 5.0. After installation I am not able to login with my credentials(username admin, password XXXX) I can ping my ISE server after initial installation but I can not ping my ISE server after full installation.I did the installation several times and even did it on a VM with differrent VMversion.
Customer is running LMS 2.6.Scheduled backup was running perfect. But it is no more happening.When we checked we found that the "License Manager/ Deamon Manager is down" message pop ups.
We reset the casuser password, and then restarted the services. It becomes ok.But only the immediate backup is successful. Scheduled task fails for all those devices."License Manager/ Deamon Manager is down" happens quite often.
I've made hotspot ad hoc and then my client try to connect my hotspot but it must setting manually...how to my client connect to my hotspot automatically not manually??? and how to install and setup dhcp server i windows 7...
I have XP 64bit OS and I can't seem to get the setup CD to install E4200 Router. I have looked at the FAQ and it says it should be compatible with all Windows OS. Is there a link out there to the drivers I need to do this?
I have a dell studio 1555 and i im not able to install bluetooth setup.While installing bluetooth setup a message will be shown by saying "switch on the wireless" but in my laptop there is no switch of wifi near hdmi port.
Region : India Model : TL-WR740N Hardware Version : V4 Firmware Version : 4.23 ISP : GTPL
I recently bought Tp-Link wr740N model but when i run Easy setup assistant on my Windows 8 64bit, A Welcome page appears. When i click START button , a windows error comes out saying. TP-LINK Easy Setup Assistant has stopped working with following error
I'm trying to setup a SSL VPN on a 2811. I believe I have the SSL VPN portion understood, but I can't tell because I keep getting stuck on the Certificate Server, ca trustpoint and identity trustpoint configuration.
guide that walks you through the CA cert, Cert Server, ca trustpoint and identitiy trustpoint to ios SSL VPN?
I am trying to get a NAC demo running and am having some issues with a Layer 2 OOB, Virtual GW configuration. Currently I have 3560G switches and would like to assign ports to a vlan based on user roles.
My Auth VLAN is 110 and maps to VLAN 11 Guest VLAN is 11 (172.16.1.0/24) Employee VLAN is 1 NAS Mgmt VLAN is 20 - CAS is 10.10.20.5 (this ip is setup on both eth0 and eth1 per documentation for L2 OOB Virtual GW) NAM Mgmt VLAN is 30 - CAM is 10.10.30.5 Untrusted (Eth1) switchport is setup as a trunk allowing only vlan 110 and has a native vlan 999 to blackhole traffic. Trusted (Eth0) switchport is setup as a trunk allowing vlan 1, 11, 20 and has a native vlan 998 to blackhole traffic.
I also setup a Managed Subnet on the CAS with IP 172.16.1.254 and VLAN 110.Switchport controlled by NAC is access vlan 110. When a machine connects an snmp trap is sent to CAM and is forced into vlan 110. If I try to put the port in another vlan CAM puts it back to 110 immediately. This all seems to be working well.The machine connected to the port gets a DHCP address from VLAN 11. When I initiate traffic from this machine, everything is blocked. If I open a web browser I do not get an authentication page. I also installed CCA 4.1.10 on the machine but it does not find a discovery host and the Login option is grayed out. The only way to get this machine to send traffic is to add a filter for it and force it to the ALLOW option. I did setup a default web login page but I seem to be missing something to get authentication to work. I am running version 4.1.8 with a demo license. The host running CCA is Windows Vista.
I'm have upgraded our ASA5510's from 7.0.8 to 8.4.3 and now I just need to do the ASDM, but get this error? The bin file has been uploaded: [code] Device Manager image set, but not a valid image file disk0:/asdm-647.bin.
