I've been working on setting up a VPN on my home network's Cisco 871 (12.4(24)T4). I've gotten to the point where I can connect from a remote Linux server using VPNC, however, when I try to connect from an iPad or Cisco VPN client, it doesn't seem to be making it past phase 2 -- not even prompting for the username and password.
View 2 RepliesCan not connect computer to Cisco Connect -.Receive error msg 82BD0305. Reset to EA3500 to default and reinstalled software.
View 8 Replies View RelatedI have a wireless Linksys E1500 router, and for quite a few months now, my router just stopped working properly. It quit, I unplugged everything and plugged it back in, and it worked, but from that point on, it's been displaying this:
I've tried changing the Ethernet cables
I just bought the e1000 router today and I'm already having trouble. I got it setup the first time and all my computers set up with it and it works fine for internet. Everything is snappy and responsive and I don't have any of the problems I did with my old belkin. However, I am unable to connect to the router using cisco connect or the web interface. I need to forward ports, configure wireless security, etc etc. All I did was disable the guest account through cisco connect, and then when the software just sat there doing nothing with the spinning circle in the middle, I opened task manager and killed the process to get it to go away. Now I can't connect using either cisco connect or the web interface.
View 7 Replies View RelatedI got a problem when I use WLC 5508 connect to LDAP for authentication, but no luck there, it's a simple config, but not easy to work on my job, I got the following messgae. [code]
View 9 Replies View RelatedI am in the process of opening an internet cafe. I dont know exactly what a pc server does on the network... or do I really need one? Is the switch/hub sufficent to connect all pcs to the moderm to connect to the internet?
View 1 Replies View RelatedFew days ago I started to get the following error message while trying to connect to the internet using Chrome and IE:"Unable to connect to the proxy server..."I don't have a proxy server configured - nothing is checked in the LAN settings page.In Firefox I don't have that problem - it seems it gets the proxy configuration from elsewhere.
View 3 Replies View RelatedIn my device I am able to browse through & connect to my HOME wifi network ; But after connecting it says 'No Internet Access'.I tried connecting with my SONY Bluray , iphone , ipad , laptops -- everywhere same story.I am able to plug in the ethernet cable directly from modem & able to connect to network.I am not able to open the http://192.168.0.1 -- ( When I am plugged in the modem directly)
Following are my router details
FCCID - KA2DIR601A1
IC : 4216A-IR601
H/W Ver:A1
F.W Ver:1.00 NA
when i connect my sylvania netbook to my wireless internet it says connected, excellent signal but when i try to pull up a web page it says can not connect to server...
View 1 Replies View RelatedI'm trying to connect to my home laptop from work. The home laptop is connected to DIR-655 router. I set up the internal and external ports to 3389 using both TCP and UDP protocols with the Application as "Remote Desktop". From my work PC I enter the external IP with :3389 and it fails to connect. I have also tried accessing internally which is failing too. All computers are running Windows 7 Home Premium Remote Access is enable on all.
View 1 Replies View RelatedRecently I installed connectify because my uni flat only had one wired outlet, and I wanted to use my xbox at the same time. It worked perfectly, but when I returned home I found my laptop could no longer connect to the home network, it just says it cannot connect, but all the over devices in the house work. My laptop can still connect to the internet via an ethernet cable but this isnt practical at home. I've uninstalled the connectify program, and tried my best to make sure I got rid of all the stuff it's done, but still my problem persists
View 5 Replies View RelatedI'm connected to a wifi at home on my cellphone, says signal status is excellent, 54mbps, wpa psk security but I cannot connect to the network. My desktop pc is connected via ethernet and it is working. I tried connecting to a neighbor's wifi and it worked on the same cellphone. WLAN light is flashing, the rest are solid. I have a prolink adsl router.
View 1 Replies View RelatedAny way to connect a wifi usb to a wireless router for better wifi connect?? i have wifi but it only gets in the room of the house im in and want it to work though out the house not just one room
View 1 Replies View RelatedI have just built a PC desktop and do not think it has the wireless built-in on the motherboard. I'd like to connect to the local network wirelessly. I know that the easiest answer to this is to get a wireless PCI card. But can I ask that in order to be able to access to the LAN wirelessly, I could plug my PC directly into the wireless access point TP-Link.
View 1 Replies View RelatedFor some reason, I can see the wireless connections on my laptop but not on my Dell Computer. When ever I try to connect on my computer i see no wireless connections at all, i have A wireless USB adapter that use to be on put in the back and recieved wireless connections in the past but now it doesnt, I try the front ports, and nothing works except for one, but that one port doesnt work for some reason, the same thing happens, no connection at all.
View 6 Replies View RelatedI have just moved in to a basement apartment and can connect to the internet with my wireless but not with the ethernet cord ran downstairs for me. The other computers upstairs work fine on ethernet through the same router. I do not understand what the problem could be. here are my configs:
Microsoft Windows [Version 6.0.6002]
Copyright (c) 2006 Microsoft Corporation. All rights reserved.
Windows IP Configuration
[Code].....
At first I can connect to Internet for 1 min and fails afterwards even if I reconnect to the router. Then I turn on the Access Control settings on my (NETGEAR) router and put my laptop into the trusted wireless stations list, now it can connect to Internet for 1 min and fails however it works for another 1 min if i reconnect to the router. So now I need to reconnect to the router every minute or so.I can connect to the Internet via Ethernet cables, so I am quite sure it's the wireless problem on my router but not the service provider's fault.
View 1 Replies View RelatedI can't seem to connect my laptop using my ethernet cable, but I'm able to connect it to the Internet using my wireless connection. Whenever I plug in the cable, my computer tells me that the LAN connection is connected, but I can't open a web page. I tried connecting the cable onto another laptop and it worked, so I don't know what's up with the LAN connection on mine.
Command Prompt Message after ipconfig /all:
Ethernet adapter Local Area Connection:
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : NVIDIA nForce Networking Controller
[code].....
I have a new broadband connection and I was kinda facing problems connecting wirelessly with my router.So I did go to my router page and then cloned my MAC book's mac id, and it worked fine. I'm able to connect to the internet wirelessly. However, I can't connect to internet from an Windows XP lappy. I have removed, re-added the network, the network is very much identified but the laptop doesn't wanna connect to the internet wirelessly.Both the laptops MAC Book pro and Dell(the one which has XP loaded) were able to connect without any problem in the previous ISP's case but XP doesn't wanna connect to with the new ISP.
View 3 Replies View RelatedThe current scenario is as follows:
ASA 5505 Site A connects to ASA 5505 Site B S2S VPN, both has static IP address.
Now I need to change from ISP so that I can get more internet bandwidth, but the new ISP only has dynamic IP address.
Now I need to change Site B's config to use dynamic IP and still connect to Site A and establish a S2S VPN.
How can I do this?I want the ASA 5505 to change its IP daily so that the VPN connection is still up even if the ISP at site B changes its IP. Or a way to do this automatically as I don't have anybody at site B that can do this manually for me.
I have a cisco 870 router, if i have a internet connection can I use this to connect one pc to the net without using a modem?
View 3 Replies View RelatedI have 2 network in 2 bulding. I want all the PCs in two bulding 1,2 can connect to websever throught out http:[url].....
I have already configured PVN on two router B1_R1and B1_R2, but it is not successful in each of building, I have 3 deparments such as marketing,fiance, and Human Resources. I configures successfully PCs in each departments can be seperated each other, using access-list and switch 3560 layer 3 but I have a problem with network at B1_R2, they cannot connect to websever although I configure VPN.I simulated in packetracer newest version 5.3.1
code in multilayer sw0
!
version 12.2
no service timestamps log datetime msec
no service timestamps debug datetime msec
no service password-encryption[code].......
So I've got a IPv6 tunnel with Hurricane Electric and it's currently physically segmented off of my home network. A 1841 terminates the tunnel and if I want to use it I need to plug into a port thats on a VLAN with no SVI and connect outbound to test IPv6 stuff. I'd like to give access to some other users and Im wondering if 6 over 4 tunneling with AnyConnect will work for that. My thought was that they could terminate on my main firewall (5505) and then terminate their VPN session in another vlan which was connected to the IPv6 router. I have this config working right now with IPv4 and I can browse out but Im struggling with the IPv6 support piece. The admin guides from Cisco seem to indicate that I'll need to configure IPv6 addressing on the ASA which makes sense, but doesnt fit my current design.
View 2 Replies View RelatedI am not able to remote access my work computer from my new Samsung Laptop. I was finally able to install the VPN software, but the remote access does not work on my new machine; however, it works on my old HP machine.
View 3 Replies View RelatedI'va upgraded my Web View server from java 1.5 version to 1.6. After upgrading i'm unable to connect to other server through SSL.
View 2 Replies View RelatedI have just wired my house and have a cisco 2950 switch running in the basement. every rj45 jack in the house works with everything except one computer. we have a HP with an nforce 4 chipset. this computer was connected through a hub and to a netgear router using the wires in the walls, the same wires and ends this switch is connected trough now. This computer stoped detecting a connection when we moved it off the hub and to the switch. all the ends and punch downs are using B wiring pinout. I have tried a new cable, when i plug any cable from the wall jack to this laptop it works, when i move the same cable to the HP it does not detect any cable plugged into it. when i setup ICS on this laptop it will connect and does detect the connection with the same cable running from the wall jack to the HP that it previously did not detect.perhaps the HP wants to use the 2 pairs that are other wise dormant? im about to install a new nic and see what that does but i can not understand why the Nforce nic would not connect to a cisco switch
View 3 Replies View RelatedI have a software VPN client that connects just fine to the PIX 501 VPN, but I cannot ping or telnet to any services on the LAN. Below is my config and results of show cry ipsec sa.
It's been a while since I have done this. When I check the DHCP address received from the VPN, the default gateway is missing. IIRC, that is normal. What is strange is that when I ping, Windows does not show any sent packets.
--Drichards38
PIX Version 6.3(3)
interface ethernet0 auto
[Code].....
I have a PIX 501 that I used to be able to connect to just fine. Now I cannot get the PDM to come up Inside, Outside, Nothing. I am using the same(old) version of JAVA 1.4 that I have always used. I can Telnet etc.. just fine. The HTTP server is enabled and have granted access to from my IP's.
pixfirewall# show run: Saved:PIX Version 6.3(5)interface ethernet0 autointerface ethernet1 100fullnameif ethernet0 outside security0nameif ethernet1 inside security100enable password 8Ry2YjIyt7RRXU24 encryptedpasswd XXXXXXXX encryptedhostname pixfirewalldomain-name ciscopix.comclock timezone EST -5clock summer-time EDT recurringfixup protocol dns maximum-length 512fixup protocol ftp 21fixup protocol h323 h225 X0fixup protocol h323 ras X18-X19fixup protocol http 80fixup protocol rsh 514fixup protocol rtsp 554fixup protocol sip 5060fixup protocol sip udp 5060fixup protocol skinny 2000fixup protocol smtp 25fixup protocol sqlnet 1521fixup
[code]......
How to resolve the following issue about LMS version 3.2 so when i launch the topology service a mesage error.Cant not connect to ani server
View 2 Replies View RelatedI'm trying to get an internet connection through my cisco 877va but I can't get access. I cant apply show cotroller vdsl 0 command and I can see DSL up, however, the dialer0 interface can't get access to internet. If I apply "show int dialer0 account" coomand, I get the next message: "No traffic sent or received on this interface". [code]
View 14 Replies View RelatedWe got the following error message on Ciscoworks LMS 2.6 on Solaris 5.9:
{diskWatcher} - Avialable space in /var of server xxx is less than 10 percent.
We stopped the Daemon Manager and delete some log files. After restarting the Daemon Manager it took about 45 min to came up but unfortunately when we tried to connect to the sever by IE we got "Internet Explorer cannot display the webpage" the pdshow shows that:
Process= Apache
State = Never started
Pid = 0
[Code].....
I can connect to a 877 router via SSL, however when I click on “Start” for Tunnel connection a separate window is opened with a “Website not found 404 error”.
View 2 Replies View RelatedOnce a client connects to my VPN (VPN Client 5) they can not see anything other than the outside interface. If I ping anything on the LAN for example I get a reply from the outside interface. I can not see any WAN either (even by IP) My LAN clients can see the clients within the VPN Pool. I would like all traffic to flow through the VPN. I have tried split tunneling to verify if the internet would work and local lan would stay connected. It does work but I was still unable to access anything on the remote netwok. I am not sure if I am missing a nat command or something simple.
The current setup is as follows. 881 Router with windows 2008 radius authentication. The client is authenticating and reciving an IP address from the local ip pool. Please see below for the running config.
crypto ipsec transform-set myset esp-3des esp-sha-hmac
!
crypto dynamic-map dynmap 10
set transform-set myset
!
!
crypto map clientmap client authentication list userauthen
crypto map clientmap isakmp authorization list groupauthor
crypto map clientmap client configuration address respond
crypto map clientmap 10 ipsec-isakmp dynamic dynmap