I have a software VPN client that connects just fine to the PIX 501 VPN, but I cannot ping or telnet to any services on the LAN. Below is my config and results of show cry ipsec sa.
It's been a while since I have done this. When I check the DHCP address received from the VPN, the default gateway is missing. IIRC, that is normal. What is strange is that when I ping, Windows does not show any sent packets.
--Drichards38
PIX Version 6.3(3)
interface ethernet0 auto
This past weekend I went out of town and took my Windows 7 laptop with me -- since I returned home, it has been unable to connect to my wireless network. Other devices in my home connect to the network just fine, and the problem laptop has always been fine until now. My network card is an Atheros AR9285, and I'm attempting to connect to a Medialink router with WPA password protection and AES encryption.My wireless network icon in the task bar has a yellow sign with an exclamation point in it. It says "No Internet access."
I seem to be struggling to connect more than 4 cameras to my (ISP-supplied) modem/router by Netgear CGD24N via WPS. I'm on my 5th camera now (already have 3x 930L and 1x 942L) but the newest 942L just won't connect to the network at the moment and there's definitely no faults here as I swapped cameras today at the local retailer (and got an A3 942L!).I've even tried connecting the camera to my wireless extender (Netgear WN3000RP) but no luck there.
So far it has only worked twice for short periods of time (enough for me to configure the cameras) but since then I can't actually get it working. I've got a couple of spare wireless routers lying around too and should be receiving a DIR-600 soon (from the Netgear promotion in Australia) which could be useful?
Camera set up with the Beta Mac wizard connected via ethernet on Airport base. Wireless security WPA2 Personal. Using DHCP. AirPort Utility 5.5.2, OSX 10.6.6.I can see the cam with the myDlink Lite iPhone (4) App when I am in my house with my wireless network. When I am out, away from my network, the App can't connect to the cam, tells me to check my network settings. I did the wps way and added the cam in the airport base utility *Access Control* tab but still doesn't work. Checked in the cam web page settings, can't figure out what the Pre-Shared Key is and where I get it/set it up in the airport utility...
I have 2 questions about a Network hard disk(for home using).I bought a hard disk (with a network card).This hard disk is connected to my "box"I have 2 questions...Is there a way to increase the speed of writing (20 Mo/s in usb) against 1 Mo/s in network.My second question is to find a way to connect to this harddisk from another network without using VPN
I have a question about my windows systems(XP and Vista) re-connecting to my network folders when my computers restart. I have some shared network folders on my Synology DS410. And then i mapped a network drive to use those folders.But every time i restart my computer i get the message "cannot reconncet all network drives"I have to put in my username and password everytime. I choose Remember login and password.How can i fix this so it automatically connects to these on restart?
FYI... 1 computer - Windows Vista Home Premium 1 computer - Windows XP Home Both connected via wired LAN
My iSCSI drives connect just fine on restart. Just not my mapped network folders.
I have a home network and I need to connect 3 USB printers. I was searching online and I'm not sure if I needed a network switch, a USB network hub, or a multiport print server. I need all 3 PCs to be able to access any printer.
Here's what I have in mind. I'm just not sure what hardware I needed (red outline). The cheaper the better. Oh and I don't want a 24/7 PC running as a server.
Namely an Unidentified Network with no NETWORK access. Some information first, the NIC that Im using is the Realtek PCIe Family Controller, Ive updated the drivers, Ive uninstalled, Ive reinstalled. Ive basically been on the internet for the past two days trying all the solutions. Including refreshing and renewing my ip, trying a static ip (although, Im still not sure if I did this step correctly) Ive tried disabling IPV6, Ive tried adjusting my speedflux. The problem is also intermittent with seemingly no reason whatsoever, some days Ill go without internet for the entire day, then the next day Ill boot up my computer and Ill have internet again. It should be noted that when I enable WIRELESS on my laptop, Im able to connect to the network, but when I enable wired, I am not able to.
Here is the ipconfig /all for when Im connected wirelessly and have a connection.
Microsoft Windows [Version 6.1.7601] Copyright (c) 2009 Microsoft Corporation. All rights reserved. C:Windowssystem32>ipconfig /all
[Code]....
It should be noted that I am using powerline adapters for my connection, but as I said, this problem only recently started cropping up. I went fine for almost a week with no problems, then all of a sudden it started happening. Im still able to connect wirelessly so its not too much of an issue, but I prefer via Ethernet..
My pc is windows 7ultimate and my laptop is vista ultimate. the router is connecting fine to the pc. as i try to connect to the laptop it keeps saying unidentified network and local access only. i tired different things but nothing seems to work. it will work only when there is no password on the wireless.
Recently I've been having some internet problems. Namely an Unidentified Network with no NETWORK access.the NIC that I'm using is the Realtek PCIe Family Controller, I've updated the drivers, I've uninstalled, I've reinstalled. I've basically been on the internet for the past two days trying all the solutions. Including refreshing and renewing my ip, trying a static ip (although, I'm still not sure if I did this step correctly) I've tried disabling IPV6, I've tried adjusting my speedflux, believe me I've tried just about everything, I don't have one blue link left when it comes to my google searches on fixing this problem.The problem is also intermittent with seemingly no reason whatsoever, some days Ill go without internet for the entire day, then the next day I'll boot up my computer and I'll have internet again. It should be noted that when I enable WIRELESS on my laptop, I'm able to connect to the network, but when I enable wired, I am not able to.[code] I'm still able to connect wirelessly so its not too much of an issue, but I prefer via Ethernet.
Trying to fix a XP computer that doesn't seem to connect to the network (wired LAN) via a Realtek RT8168/8111 PCI-E Gigabit Ethernet NIC. I don't have the network symbol in the task bar for some reason (the two over lapping computers) and when just clicking "repair local area connection" it can't renew the IP.I've tried:- new drivers- ipconfig /renew and /release- cable check (the same cable and connection works for other pc's)- pinging the hub with 100% fail despite hub recording a ping- checking IP settings are automatic- winsock- device manager (says everything isfine)- system restore
In HQ , we have cisco ASA 5520 . there is a data line which supplied by ISP for MPLS-VPN service with branch office. branch offices also have a data line which r supplied by ISP. And now, I want the branch office to access resource from HQ without site to site vpn configuration( because we don't have ASA or any device to configure L2L VPN) . so, I need to configure the hq firewall to allow the branch office accessing the resource at hq without any restriction.
I bought 3 switches (gs 300-28 ports)and i need to connect them to my network, when all the switches are cisco 3560g, with vtp on the vlans.my question is, how to creat vlans on this switch? and Is it possible to make the gs300 learn the vlans on the 3560g?if he dosent has the vtp client?
I recently purchased a couple of these WAPs and also purchases some PoE injectors to connect them. The PoE injectors supply them with power, but not networking. I've tried multiple injectors and verified they are not defective. Is there any type of setting that needs to be adjusted to make this work? If I power them using traditional methods they work fine. Here's a link to the PoE injectors that I'm using: URL
setting up VPN IPSec with Cisco ASA 5505. I've managed to successfully setup VPN andcan connect to it from outside and browse securely to the outside/internet via tunnel. However, once I am connected to VPN, I cannot access any of my internal hosts/servers via VPN client.
I'm having a problem connecting to multiple servers. I do know that I have stopped the windows firewall and taken out Norton and avg, yet I still can't connect to any servers. I've even tried on other networks! I can download torrents and surf the internet just fine though. I can't connect to an online class server to do my homework, and I've also tried to start playing WOW but neither will connect. I also don't see peer guardian 2 in *services*
I've got my network up an running and all my devices (wired computer, wireless PS3, wireless smartphone, etc..) can connect to the network except for one of my wireless computers. I've set the TCP/IP to obtain IP automatically and using the correct PPPOE username/pass I try to connect, but it never works.
Working in a small Software company. In my company we use 2mbps speed internet connection from one Internet service provider. We have 15macs(Users) in my company. All connected to that 2mbps internet.Due to slow service we had taken one more 2mbps from different internet service provider.My requirement is Using these two internet connections with different ISP and make All the computers communicate with each other. i.e., For file sharing, pinging from system under one ISP to the other.
i have more than one laptop, all my laptops connect to the wireless network with no problem except for one. i have no idea why it doesn't want to connect and i don't know what the problem is
when I try to connect my wireless printer, it is asking for the IP address. I type in the same addres that is on my computer, but I get message says computer does not recongize network printer. So I trid two other addresses and those did not work. I am conufsed. How do I knw what address to type in?
Im trying to use a poker client on a business network with a server, for example pokerstars cant connect to its servers from my computer at work how do i configure the server to allow my poker client to connect?
I'm having trouble connecting to my home network. Whether it be wireless or wired. My computer will say that I'm connected to my network, however it says identifying network forever. Same thing with wired. I'm running windows 7...my network adapter cards are as followed : Atheros AR5B97 Wireless Network Adapter and Atheros AR8151 PCI-E gigabit ethernet controller. I've tried to update both of them, with no success. I've uninstalled both of them and reinstalled them, again, with no success.
I can connect to internet through my tablet. Also I had no problems last week it was working fine and yesterday I reset the router and it connected for awhile. I have 4 other pcs on the network and they are all working fine.
Not sure what else to try.
Tech Support Guy System Info Utility version 1.0.0.2 OS Version: Microsoft Windows 7 Professional, Service Pack 1, 64 bit Processor: Intel(R) Core(TM) i3-2330M CPU @ 2.20GHz, Intel64 Family 6 Model 42 Stepping 7 Processor Count: 4 RAM: 4010 Mb Graphics Card: Intel(R) HD Graphics 3000, 1813 Mb Hard Drives: C: Total - 476654 MB, Free - 71864 MB; Motherboard: LENOVO, Emerald Lake Antivirus: None
I want to create a home network between a desktop (W7 64 Ultimate) and a laptop (W7 64 Home Premium), wireless.Router is TP Link TL-WR941N, AP (for desktop) is TL-WA701N. From the laptop the network map shows all devices, but the desktop is not connected to the AP.
new HP 2000 computer he just purchased. I brought it to my house to set it up. No problems connecting to wifi at my home. Downloaded all the updates and got it ready for his house. When I tried connecting to his network, it kept giving me the network key. I know I was entering the correct information because we had his older computer and I copied the exact thing. I had also made a folder when I set up his other computer with his information for his network in it and I was going by that. I tried to automatically connect and I also tried to manually connect. I deleted the name of my network (that worked) and rebooted. It continually gives me the block to put the password in. I brought it back to my house and the wifi connected with no problems. His old toshiba had no problems connecting to his network. I disconnected it and reconnected it. Is there something about the settings I am not doing? Or is it a firewall setting? Is there something in the modem that is conflicting with the new HP. It's a WAP2 Personal with AES Encryption (did not work on that one), where as my network is a WPA Personal with TKIP Encryption (worked on this one). Will that make a difference and if so what do I do about it?
I'm having problems connecting to our wireless network. With my old PC in the same room in the house I've had it connected before, about a year ago. With my new computer though, I'm having issue after issue.
I switched on my laptop today and it wouldn't connect to the internet because of an 'unidentified network' problem. Last night before I went to bed it was surfing the net fine and then this morning, nothing. No one has touched the laptop overnight and it was switched off all night so I have no idea how this has happened. I'm using my internet connection via my iPhone with no problems. I've already tried several things to try and fix the problem - I've reinstalled all network adapters, have fiddled with IPv4 settings, have deleted and re-setup my network connection, and have restored Windows to a previous point. I can't connect my laptop to the router using a cable because I live in a bock of flats where lots of people share the same router and it's locked in a security box, so I'm just using a wireless connection.
recently, I have been unable to connect to my network.When I attempt to, it tells me that windows cannot connect to hsusnet(my network name)when I try to troubleshoot, it resets my network adapted and tells me to turn my modem off and on.
